Florent Kermarrec
79ac09316a
interconnect/axi/AXIBurst2Beat: Fix BURST_WRAP case.
2021-08-06 16:41:58 +02:00
Florent Kermarrec
ce5864983d
soc/add_cpu: Add memory mapping overrides to build log and make an exception for the CPUNone case.
...
A regular CPU can provides specific mapping constraints and we are overriding provided mapping
with these constraints.
The case of CPUNone is different and we can do the opposite: Give priority to User's mapping.
For the regular CPU case, the override was done silently, it is now logged during the build.
2021-07-30 15:00:10 +02:00
Florent Kermarrec
c80d5723c9
soc/add_spi_flash: Reduce default_divisor.
2021-07-30 12:32:57 +02:00
Florent Kermarrec
6100620634
bios/main: Display Flash in SoC capabilities.
2021-07-29 19:26:01 +02:00
Florent Kermarrec
518a3e1f65
liblitespi/spiflash: Use software defined constants and fix spiflash_master_write (mmap renamed to core).
2021-07-29 19:25:28 +02:00
Florent Kermarrec
ab48461d6a
soc/add_spi_flash: Generate useful software constants from SPIFlash module.
2021-07-29 19:24:30 +02:00
Florent Kermarrec
f0a258e0a7
soc/add_spi_flash: Use cached SoCRegion, fixes #981 .
2021-07-29 18:53:04 +02:00
Florent Kermarrec
bb9701b5f6
soc/add_spi_flash: Move integration code for previous LiteX SPI Flash core to compat/soc_add_spi_flash.py.
2021-07-29 18:48:03 +02:00
Florent Kermarrec
60c4a1b667
liblitespi/spiflash: Review #979 and other cleanups.
...
- Rename optional #define and allow defining them externally.
- Add comments.
- Rename FLASH_CHIP_MX25L12833F_QUAD to SPIFLASH_MODULE_QUAD_CAPABLE.
- Rename FLASH_CHIP_MX25L12833F_QPI to SPIFLASH_MODULE_QPI_CAPABLE.
The instructions used for QUAD/QPI are probably different between chips, we could
imagine providing them through the LiteX integration based on the passed SPI Flash
module.
2021-07-29 18:21:07 +02:00
enjoy-digital
1933beadb1
Merge pull request #979 from antmicro/litespi-qpi
...
WIP: enable QPI mode in liblitespi
2021-07-29 17:59:51 +02:00
Florent Kermarrec
c5b5abd103
soc/add_spi_flash: Rename spiflash_mmap to spi_flash_core (since LiteSPI inclule MMAP and Master Interface).
2021-07-29 17:42:07 +02:00
Florent Kermarrec
505c8b85d6
soc/add_spi_flash: Reduce LiteSPIPHY default divisor to max(2, self.sys_clk_freq/clk_freq).
...
One small FPGAs running the BIOS from SPI Flash, the default divisor of 9 was slowing down too
much BIOS boot time (It was OK on reboot after liblitespi auto-calibration). Reduce the default
divisor to avoid this.
2021-07-29 17:16:47 +02:00
Florent Kermarrec
14d60661b9
software/bios/main: Generate Initialization banner for SPIFlash.
2021-07-28 10:55:02 +02:00
Florent Kermarrec
8415e5d6ac
integration/soc/add_spi_flash: Add LiteSPI initial support (enabled when module is provided).
...
Test on iCEBreaker in 1X/4X mode for now. In the future, we could probably deprecate support
for old SPIFlash core.
2021-07-27 19:21:54 +02:00
Florent Kermarrec
80e9d2cea9
soc/interconnect/stream: Support n=1 case on Multiplexer/Demultiplexer.
...
Required by LiteSPI when only one Core is connected to the PHY (ex when disabling Master or MMAP).
2021-07-27 16:57:22 +02:00
enjoy-digital
94c934d2fb
Merge pull request #980 from developandplay/update-blackparrot-imafd
...
Update blackparrot imafd
2021-07-27 08:33:32 +02:00
developandplay
c36e2ae4e8
Add imafd support
2021-07-27 00:44:32 +02:00
developandplay
6ba514ee96
Separate BlackParrot code from adapter code
2021-07-27 00:43:09 +02:00
enjoy-digital
3387853b6b
Merge pull request #977 from antmicro/jboc/gtkw-endpoint
...
GTKWSave: improved support for Endpoint
2021-07-26 15:01:49 +02:00
Filip Kokosinski
0a0e337754
soc: software: liblitespi: enter QPI mode when using MX25L12833F
2021-07-26 14:32:56 +02:00
Florent Kermarrec
1ce48a973b
clock/lattice_ecp5: Fix and rework 4-output solver implementation.
...
The implementation was causing regressions on actual designs, rework done:
- Only keep a common iteration loop as before.
- Add iteration on CLKO dividers (to fall in the VCO range).
- Do the iterations as before, if while doing it we find a clock suitable for feedback: just use it.
- If no feedback clock has been found: create it (if at least one free output available, if not raise an error).
2021-07-26 14:00:00 +02:00
Jędrzej Boczar
4636a841d3
build/sim/gtkwave: automate handling of Endpoint and other stream primitives
2021-07-22 15:49:20 +02:00
enjoy-digital
751e99690e
Merge pull request #965 from thirtythreeforty/ecp5-pll-x4
...
ECP5PLL: implement 4-output solver
2021-07-21 19:08:18 +02:00
enjoy-digital
a782596513
Merge pull request #975 from cklarhorst/master
...
soc/add_sdcard: Fix IRQ code, only add IRQs depending on mode
2021-07-21 11:57:21 +02:00
Christian Klarhorst
e17a010866
soc/add_sdcard: Fix IRQ code, only add IRQs depending on mode
2021-07-20 22:08:36 +02:00
Florent Kermarrec
c64c6e4056
cpu/blackparrot: Re-map csr and keep the lower 128MBs for the SoC IO auto-allocation.
2021-07-20 12:05:54 +02:00
enjoy-digital
1bf7abfc8a
Merge pull request #970 from trabucayre/openfpgaloader_check_type
...
openfpgaloader: improves freq conversion type
2021-07-19 09:58:21 +02:00
Gwenhael Goavec-Merou
e3f577e0be
openfpgaloader: improves freq conversion type
2021-07-17 17:02:22 +02:00
Florent Kermarrec
e0d5a7bff5
interconnect/packet/Packetizer/Depacketizer: Avoid generating unaligned logic when aligned.
2021-07-15 19:00:50 +02:00
Florent Kermarrec
0a919e709f
interconnect/packet: Improve PacketFIFO to handle payload/param separately.
...
Useful to save resources and store Stream's params more efficiently.
2021-07-15 18:06:03 +02:00
Florent Kermarrec
b2f8fa5464
gen/fhdl/verilog: Make DummyAttrTranslate a dict.
2021-07-15 16:48:24 +02:00
enjoy-digital
bf52c1083f
Merge pull request #969 from trabucayre/openfpgaloader_add_cable_and_freq_options
...
openfpgaloader: add cable and freq options
2021-07-15 12:18:01 +02:00
Florent Kermarrec
730b57d9cd
build/gowin: Add initial timing constraints support.
2021-07-15 11:06:03 +02:00
Florent Kermarrec
10ea45da55
build/microsemi/common: Cleanup MicrosemiPolarfireAsyncResetSynchronizerImpl.
2021-07-15 10:01:52 +02:00
Florent Kermarrec
2b393254da
build: Simplify attr_translate (Now automatically defaults to None when not explicitely listed).
...
Most of the attributes are Xilinx specific, it does not make sense to provide them on other FPGA devices.
2021-07-15 09:59:15 +02:00
Florent Kermarrec
bdc32171fd
gen/fhdl/verilog/_printattr: Avoid trying translating attribute when not supported by Toolchain.
2021-07-15 09:57:15 +02:00
Florent Kermarrec
4fd974be10
build/gowin: Minor cleanups.
2021-07-15 09:36:41 +02:00
Gwenhael Goavec-Merou
3706ed7416
openfpgaloader.py: cast int to str
2021-07-14 17:50:50 +02:00
Gwenhael Goavec-Merou
c984a4dbc8
openfpgaloader: add cable and freq options
2021-07-14 16:48:29 +02:00
Florent Kermarrec
756503ab92
clock/gowin_gw1n: Add Initial On-Chip Oscillator support.
...
Ex: self.submodules.osc = GW1NOSC(device="GW1N9K", freq=10e6)
2021-07-14 11:42:35 +02:00
Florent Kermarrec
6fc87f7c85
build/gowin/common: Add DDRInput/DDROutput implementations.
2021-07-14 10:01:54 +02:00
Florent Kermarrec
a8cea15b95
cores/clock/gowin_gw1n/create_clkout: Add reset support (through AsyncResetSynchronizer) and enable it by default.
...
Should be based on PLL's lock but does not seem stable, so use reset input for now.
2021-07-14 09:38:23 +02:00
Florent Kermarrec
cfbc06c297
build/gowin/common: Add AsyncResetSynchronizer implementation.
2021-07-14 09:37:00 +02:00
enjoy-digital
fab6512928
Merge pull request #967 from JosephBushagour/jbushagour_assembly_interoperability
...
Make "generated/soc.h" able to be included in assembly files.
2021-07-13 10:47:59 +02:00
enjoy-digital
df67b65a0a
Merge pull request #957 from pftbest/fix_fst
...
Fix compile error when FST traces are enabled on macOS.
2021-07-13 10:38:40 +02:00
Joey Bushagour
c79e428fe1
Add soc.h interoperability with assembly.
2021-07-12 08:33:17 -05:00
Florent Kermarrec
bc77aa37f0
include/hw/common: Fix _csr_rd_buf/_csr_wr_buf for sizeof(buf[0]) < CSR_DW_BYTES case.
...
- Shift in _csr_rd_buf should only been done when buf is set.
- When CSR size is not an exact multiple of the CSR data-width, the gap is in
the low addresses, not the high ones. So offset is introduced to take this into
account.
2021-07-09 17:36:17 +02:00
Florent Kermarrec
b29a99cd0b
liblitedram/sdram.c: Fix DFII_PIX_DATA_BYTES computation.
...
DFII CSR size is not necessarily multiple of 4 (often the case but not with ECC for example).
2021-07-09 17:32:43 +02:00
George Hilliard
8954041a93
clock/lattice_ecp5/ECP5PLL: Only consider non-dpa clocks as feedback
...
Dynamically adjusting the phase of a feedback will cause it to unlock.
The phase adjust ports are shared by all the outputs, so there is no
technical way to prevent this. Allow the user to indicate that they
will not adjust a clock when requesting an output by setting
uses_dpa=False, and only consider those that the user has promised not
to use.
2021-07-08 08:14:14 -05:00
Florent Kermarrec
2b49430f2c
README.md: Rewrite Welcome section and update copyright.
2021-07-08 12:08:24 +02:00