db353526c1
Merge pull request #853 from mczerski/liteeth_slots
...
liteeth: allow to specify nrxslots and ntxslots for liteeth
2021-03-19 08:58:44 +01:00
d0c4199096
cores/gpio: Fix GPIOIRQ.
...
Compilation tested in Arty with:
from litex.soc.cores.gpio import GPIOIn
self.submodules.gpio_in = GPIOIn(platform.request("user_sw", 0), with_irq=True)
self.add_csr("gpio_in")
self.add_interrupt("gpio_in")
2021-03-18 19:05:12 +01:00
1bb4507d93
Merge pull request #846 from enjoy-digital/axi-lite-downconverter-fix
...
interconnect/axi: Fix AXILiteDownverterWrite/Read base address.
2021-03-18 18:15:52 +01:00
8460523f27
cores/video: Add VideoECP5HDMI PHY and move 10to1 Serializer to Generic, share it for Spartan6/ECP5.
2021-03-18 14:43:21 +01:00
e5695f9934
cores/video: Add VideoS6HDMIPHY (using stream.Gearbox for 10:2 convertion).
2021-03-18 13:49:50 +01:00
c01284fa23
integration/soc/add_video_colorbars: Review/Fix #849 (Fix ColorBarsPattern clock domain).
2021-03-18 13:48:53 +01:00
675349055b
inteconnect/stream: Increase io_lcm size when io_lcm/i_dw or io_lcm/o_dw < 2.
...
Allow supporting all cases.
2021-03-18 13:47:10 +01:00
d7c0b4c111
dts: gpio: interrupt controller definition for switches
...
This commit adds support for enabling interupts in switches module.
Declaring switches as GPIOIn module with with_irq=True
will make dts generation add correct interrupt controller definition.
Also, if SWITCHES_NGPIO constant is defined it will be used to
specify correct number of gpios in dts.
example:
self.submodules.switches = GPIOIn(pads=switches_pads, with_irq=True)
self.add_csr("switches")
self.irq.add("switches", use_loc_if_exists=True)
self.add_constant("SWITCHES_NGPIO", len(switches_pads))
2021-03-18 09:52:07 +01:00
6eaa426e37
liteeth: allow to specify nrxslots and ntxslots for liteeth
2021-03-18 09:24:48 +01:00
6b387eb579
cpu/vexriscv_smp add FPU support
2021-03-17 13:20:45 +01:00
a166a8dba3
Merge pull request #849 from hansfbaier/add-video-colorbars
...
video: convenience method to add color bar pattern
2021-03-16 12:51:27 +01:00
c071bb4ac7
software/liblitesdcard: Check sdcard_wait_data_done in sdcard_switch/sdcard_app_send_scr since requesting a data read transfer.
2021-03-16 12:44:00 +01:00
f86c743c58
video: convenience method to add color bar pattern
2021-03-16 12:35:58 +07:00
04cb8e0e5e
cores/xadc: Review/Cleanup PR#838, rename _XADC to SystemMonitorDRP and USSYSMON to USSystemMonitor.
2021-03-15 10:35:10 +01:00
367b510590
Merge pull request #838 from jersey99/ussysmon
...
Ussysmon: SYSMONE1 for US devices
2021-03-15 10:19:54 +01:00
13e13a094c
soc/interconnect/axi: Add AXILite Clock Domain Crossing module.
2021-03-15 10:18:12 +01:00
11f7416e36
Merge pull request #847 from zoobab/master
...
Add support for xcompiler on Alpine 3.13
2021-03-12 21:49:44 +01:00
0456de50aa
Add support for xcompiler on Alpine 3.13
...
Problem: xcompiler on Alpine 3.13 was not found
Solution is to add "riscv-none-elf-gcc":
1. Add Edge to your repositories:
$ echo -e "http://dl-cdn.alpinelinux.org/alpine/edge/main\nhttp://dl-cdn.alpinelinux.org/alpine/edge/testing\nhttp://dl-cdn.alpine
linux.org/alpine/edge/community" >> /etc/apk/repositories
$ apk update
$ apk add gcc-riscv-none-elf
2. The xcompiler should be found at:
$ which riscv-none-elf-gcc
/usr/bin/riscv-none-elf-gcc
2021-03-12 20:13:23 +01:00
1e9606f3fb
software/liblitedram: Improve find_cmd_delay to favor higher number of valid modules and centered scan.
...
Also add an optional debug #define to look at cmd/clk centering scans:
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2020 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Mar 12 2021 14:06:20
BIOS CRC passed (116682af)
Migen git sha1: 7014bdc
LiteX git sha1: edcc0f88
--=============== SoC ==================--
CPU: VexRiscv @ 125MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 64KiB
SRAM: 8KiB
L2: 8KiB
SDRAM: 1048576KiB 64-bit @ 1000MT/s (CL-7 CWL-6)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Write leveling:
tCK/4 taps: 6
Cmd/Clk scan (0-12)
|Cmd/Clk delay: 0
m0: |11000000000000011111111111| delay: 15
m1: |00000000000000111111111111| delay: 14
m2: |11110000000000000111111111| delay: 17
m3: |11110000000000000011111111| delay: 18
m4: |11111111110000000000000111| delay: -
m5: |11111111110000000000000111| delay: -
m6: |11111111111000000000000001| delay: -
m7: |11111111111000000000000011| delay: -
Delay mean: 22, ideal: 13
Cmd/Clk delay: 1
m0: |11100000000000001111111111| delay: 16
m1: |10000000000000011111111111| delay: 15
m2: |11111000000000000011111111| delay: 18
m3: |11111000000000000001111111| delay: 19
m4: |11111111111000000000000011| delay: -
m5: |11111111111000000000000011| delay: -
m6: |11111111111100000000000000| delay: -
m7: |11111111111100000000000001| delay: -
Delay mean: 23, ideal: 13
Cmd/Clk delay: 2
m0: |11110000000000000111111111| delay: 17
m1: |11000000000000001111111111| delay: 16
m2: |11111100000000000001111111| delay: -
m3: |11111100000000000000111111| delay: -
m4: |11111111111100000000000001| delay: -
m5: |11111111111100000000000001| delay: -
m6: |11111111111110000000000000| delay: -
m7: |11111111111110000000000000| delay: -
Delay mean: 22, ideal: 13
Cmd/Clk delay: 3
m0: |11111000000000000011111111| delay: 18
m1: |11100000000000000111111111| delay: 17
m2: |11111110000000000000111111| delay: -
m3: |11111110000000000000011111| delay: -
m4: |11111111111110000000000000| delay: -
m5: |11111111111110000000000000| delay: -
m6: |01111111111111000000000000| delay: 01
m7: |01111111111111000000000000| delay: 01
Delay mean: 15, ideal: 13
Cmd/Clk delay: 4
m0: |11111100000000000001111111| delay: -
m1: |11110000000000000011111111| delay: 18
m2: |11111111000000000000011111| delay: -
m3: |11111111000000000000001111| delay: -
m4: |11111111111111000000000000| delay: -
m5: |11111111111111000000000000| delay: -
m6: |00111111111111100000000000| delay: 02
m7: |00111111111111100000000000| delay: 02
Delay mean: 13, ideal: 13
Cmd/Clk delay: 5
m0: |11111110000000000000111111| delay: -
m1: |11111000000000000001111111| delay: 19
m2: |11111111100000000000001111| delay: -
m3: |11111111100000000000000111| delay: -
m4: |01111111111111100000000000| delay: 01
m5: |01111111111111100000000000| delay: 01
m6: |00011111111111110000000000| delay: 03
m7: |00011111111111110000000000| delay: 03
Delay mean: 11, ideal: 13
Cmd/Clk delay: 6
m0: |11111111000000000000011111| delay: -
m1: |11111100000000000000111111| delay: -
m2: |11111111110000000000000111| delay: -
m3: |11111111110000000000000011| delay: -
m4: |00111111111111110000000000| delay: 02
m5: |00011111111111110000000000| delay: 03
m6: |00001111111111111000000000| delay: 04
m7: |00001111111111111000000000| delay: 04
Delay mean: 9, ideal: 13
Cmd/Clk delay: 7
m0: |11111111100000000000001111| delay: -
m1: |11111110000000000000011111| delay: -
m2: |11111111111000000000000011| delay: -
m3: |11111111111000000000000001| delay: -
m4: |00011111111111111000000000| delay: 03
m5: |00001111111111111000000000| delay: 04
m6: |00000111111111111100000000| delay: 05
m7: |00000111111111111100000000| delay: 05
Delay mean: 10, ideal: 13
Cmd/Clk delay: 8
m0: |11111111110000000000000111| delay: -
m1: |11111111000000000000001111| delay: -
m2: |11111111111100000000000001| delay: -
m3: |11111111111100000000000000| delay: -
m4: |00001111111111111100000000| delay: 04
m5: |00000111111111111100000000| delay: 05
m6: |00000011111111111110000000| delay: 06
m7: |00000011111111111110000000| delay: 06
Delay mean: 11, ideal: 13
Cmd/Clk delay: 9
m0: |11111111111000000000000011| delay: -
m1: |11111111100000000000000111| delay: -
m2: |11111111111110000000000000| delay: -
m3: |11111111111110000000000000| delay: -
m4: |00000111111111111110000000| delay: 05
m5: |00000011111111111110000000| delay: 06
m6: |00000001111111111111000000| delay: 07
m7: |00000001111111111111000000| delay: 07
Delay mean: 12, ideal: 13
Cmd/Clk delay: 10
m0: |11111111111100000000000011| delay: -
m1: |11111111110000000000000011| delay: -
m2: |01111111111111000000000000| delay: 01
m3: |01111111111111000000000000| delay: 01
m4: |00000011111111111111000000| delay: 06
m5: |00000001111111111111000000| delay: 07
m6: |00000000111111111111100000| delay: 08
m7: |00000000111111111111100000| delay: 08
Delay mean: 11, ideal: 13
Cmd/Clk delay: 11
m0: |11111111111110000000000001| delay: -
m1: |11111111111000000000000001| delay: -
m2: |00111111111111100000000000| delay: 02
m3: |00111111111111100000000000| delay: 02
m4: |00000001111111111111100000| delay: 07
m5: |00000000111111111111100000| delay: 08
m6: |00000000011111111111110000| delay: 09
m7: |00000000011111111111110000| delay: 09
Delay mean: 12, ideal: 13
| best: 11
Setting Cmd/Clk delay to 11 taps.
Data scan:
m0: |11111111111110000000000001| delay: -
m1: |11111111111000000000000001| delay: -
m2: |00111111111111100000000000| delay: 02
m3: |00111111111111100000000000| delay: 02
m4: |00000001111111111111100000| delay: 07
m5: |00000000111111111111100000| delay: 08
m6: |00000000011111111111110000| delay: 09
m7: |00000000011111111111110000| delay: 09
Write latency calibration:
m0:6 m1:6 m2:6 m3:6 m4:6 m5:6 m6:6 m7:6
Read leveling:
m0, b0: |00000000000000000000000000000000| delays: -
m0, b1: |00000000000000000000000000000000| delays: -
m0, b2: |00000000000000000000000000000000| delays: -
m0, b3: |11111111100000000000000000000000| delays: 04+-04
m0, b4: |00000000000001111111110000000000| delays: 17+-04
m0, b5: |00000000000000000000000000111111| delays: 29+-03
m0, b6: |00000000000000000000000000000000| delays: -
m0, b7: |00000000000000000000000000000000| delays: -
best: m0, b03 delays: 04+-04
m1, b0: |00000000000000000000000000000000| delays: -
m1, b1: |00000000000000000000000000000000| delays: -
m1, b2: |00000000000000000000000000000000| delays: -
m1, b3: |11111111000000000000000000000000| delays: 04+-04
m1, b4: |00000000000011111111100000000000| delays: 16+-04
m1, b5: |00000000000000000000000000111111| delays: 29+-03
m1, b6: |00000000000000000000000000000000| delays: -
m1, b7: |00000000000000000000000000000000| delays: -
best: m1, b04 delays: 16+-04
m2, b0: |00000000000000000000000000000000| delays: -
m2, b1: |00000000000000000000000000000000| delays: -
m2, b2: |00000000000000000000000000000000| delays: -
m2, b3: |11111110000000000000000000000000| delays: 03+-03
m2, b4: |00000000000111111111000000000000| delays: 15+-04
m2, b5: |00000000000000000000000011111111| delays: 28+-04
m2, b6: |00000000000000000000000000000000| delays: -
m2, b7: |00000000000000000000000000000000| delays: -
best: m2, b04 delays: 15+-04
m3, b0: |00000000000000000000000000000000| delays: -
m3, b1: |00000000000000000000000000000000| delays: -
m3, b2: |00000000000000000000000000000000| delays: -
m3, b3: |11111110000000000000000000000000| delays: 03+-03
m3, b4: |00000000001111111110000000000000| delays: 14+-04
m3, b5: |00000000000000000000000011111111| delays: 28+-04
m3, b6: |00000000000000000000000000000000| delays: -
m3, b7: |00000000000000000000000000000000| delays: -
best: m3, b04 delays: 14+-04
m4, b0: |00000000000000000000000000000000| delays: -
m4, b1: |00000000000000000000000000000000| delays: -
m4, b2: |00000000000000000000000000000000| delays: -
m4, b3: |10000000000000000000000000000000| delays: -
m4, b4: |00001111111110000000000000000000| delays: 08+-04
m4, b5: |00000000000000000111111111000000| delays: 22+-05
m4, b6: |00000000000000000000000000000001| delays: 31+-00
m4, b7: |00000000000000000000000000000000| delays: -
best: m4, b04 delays: 08+-04
m5, b0: |00000000000000000000000000000000| delays: -
m5, b1: |00000000000000000000000000000000| delays: -
m5, b2: |00000000000000000000000000000000| delays: -
m5, b3: |00000000000000000000000000000000| delays: -
m5, b4: |00001111111110000000000000000000| delays: 08+-04
m5, b5: |00000000000000000011111111000000| delays: 22+-04
m5, b6: |00000000000000000000000000000001| delays: 31+-00
m5, b7: |00000000000000000000000000000000| delays: -
best: m5, b04 delays: 08+-04
m6, b0: |00000000000000000000000000000000| delays: -
m6, b1: |00000000000000000000000000000000| delays: -
m6, b2: |00000000000000000000000000000000| delays: -
m6, b3: |00000000000000000000000000000000| delays: -
m6, b4: |00111111110000000000000000000000| delays: 06+-04
m6, b5: |00000000000000111111111000000000| delays: 18+-04
m6, b6: |00000000000000000000000000001111| delays: 30+-02
m6, b7: |00000000000000000000000000000000| delays: -
best: m6, b05 delays: 19+-04
m7, b0: |00000000000000000000000000000000| delays: -
m7, b1: |00000000000000000000000000000000| delays: -
m7, b2: |00000000000000000000000000000000| delays: -
m7, b3: |00000000000000000000000000000000| delays: -
m7, b4: |01111111111100000000000000000000| delays: 06+-05
m7, b5: |00000000000000011111111110000000| delays: 20+-05
m7, b6: |00000000000000000000000000001111| delays: 30+-02
m7, b7: |00000000000000000000000000000000| delays: -
best: m7, b04 delays: 06+-05
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2MiB)...
Write: 0x40000000-0x40200000 2MiB
Read: 0x40000000-0x40200000 2MiB
Memtest OK
Memspeed at 0x40000000 (2MiB)...
Write speed: 40MiB/s
Read speed: 33MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
2021-03-12 14:34:49 +01:00
3cbdc567ff
soc: Add init_rom to initialize ROM and contents and with auto_size option (enable by default) to reduce ROM size to length of contents when in Read Only mode.
...
This ensures the integrated ROM is reduced to minimal size before build and avoid having to adjust it manually with --integrated-rom-size on targets.
2021-03-12 09:42:59 +01:00
d9b6d7608c
soc/integration/soc_core: Cleanup SoCCore arguments.
2021-03-12 09:03:17 +01:00
21273ffe87
soc/integration/builder: Cleanup and add comments.
2021-03-11 16:21:45 +01:00
cba4642444
Merge pull request #845 from meklort/meklort/xics-fix
...
xics: Disable endianness swapping
2021-03-11 13:33:15 +01:00
a81d1da980
soc/integration/common: Improve get_mem_data error reporting.
2021-03-11 10:19:36 +01:00
26f55797cc
software/liblitedram: Make sure init_error is set before init_done.
...
Useful for standalone core where the user logic can be looking at init_done/init_error to
condition user accesses.
2021-03-10 19:41:02 +01:00
da1277021a
build/generic_platform: Minor cosmetic cleanups.
2021-03-10 19:21:02 +01:00
10eff37b84
interconnect/axi: Fix AXILiteDownverterWrite/Read base address.
...
Downconverter should start on master's addr, not on aligned master's addr.
2021-03-10 18:54:02 +01:00
08072eb872
xics: Disable endianness swapping
...
The endianess swapping code caused the core to diverge from microwatt resulting in:
- The xics tests not working as-is: https://github.com/antonblanchard/microwatt/blob/master/tests/xics/xics.h
- byte writes writing to the incorrect byte
This removes endianswapping and minimizes the delta from upstream for the xics irq.h header.
2021-03-10 07:39:19 -07:00
c92e4cb3ca
xics: Ass missing static keywords to irq header.
2021-03-10 07:32:24 -07:00
9d08c65e8a
build/generic_platform: Make sure default_clk_period constraint is only applied when default_clk_period exists.
...
In simulation, default_clk_period is not necessarily required.
2021-03-10 12:25:35 +01:00
ee2d373477
Merge pull request #843 from gregdavill/monitor_token_fix
...
cores/stream/monitor: Fix typo
2021-03-10 11:00:55 +01:00
e48b269d77
build/generic_platform: Fix use_default_clk set when not user provided sys_clk.
...
Prevented the default timing constraint to be generated in the timing constraint file.
2021-03-10 10:47:22 +01:00
31cc7f1e42
cores/stream/monitor: Fix typo
2021-03-10 09:11:07 +10:30
0e7d8219ea
soc/cores/gpio: Simplify GPIOIn IRQ, make polarity configurable and also add optional IRQ to GPIOTristate.
...
Ex of instance:
from litex.soc.cores import gpio
gpio_in_pads = Signal(16)
self.submodules.gpio_in = gpio.GPIOIn(gpio_in_pads, with_irq=True)
self.add_csr("gpio_in")
2021-03-09 13:57:48 +01:00
0d8b6f8fbb
csr_eventmanager/EventSourceProcess: Add Rising Edge support and Falling/Rising selection.
2021-03-09 13:55:43 +01:00
ece9005949
cpu/vexriscv/core: Rename timer_enabled parameter to with_timer (for consistency with codebase) and disable timer by default (since increasing resources and causing issue on some iCE40 designs).
2021-03-09 09:07:52 +01:00
834c90b71f
Merge pull request #841 from gatecat/radiant_pins_x
...
build/radiant: Skip location constraint for X pins
2021-03-08 16:30:22 +01:00
c64e2d3a85
build/radiant: Skip location constraint for X pins
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-08 14:27:32 +00:00
5af8e5c934
soc/add_etherbone: Fix UDPIPCore clock domain (should still run at eth_clk even if Etherbone is running in sys_clk) since data-width convertion is done on UDP.
2021-03-08 13:50:22 +01:00
6bb0541f9a
Remove ussysmon.py as it is consolidated inside xadc.py
2021-03-06 14:31:24 -08:00
a1e54671be
sim/serial2console: Remove \r workaround since no longer required and generating double carrier return in simulation.
2021-03-06 17:36:21 +01:00
7e3912aaef
software/demo: Make hellocpp optional (only build with --with-cxx) to avoid adding g++ as a dependency for an optional feature.
2021-03-06 17:31:07 +01:00
647d3eb51a
soc/cores/xadc.py: Move ussysmon here
2021-03-06 08:14:13 -08:00
31ac6659c9
cores/video: Add VideoS7HDMIPHY for Xilinx 7-Series.
2021-03-05 14:30:28 +01:00
9624cce188
cores/video: Mode VideoVGAPHY/VideoDVIPHY and add separators.
2021-03-05 14:27:08 +01:00
0280a9dd57
soc/add_video_framebuffer: Pass clock_domain to VideoFrameBuffer.
2021-03-05 14:23:39 +01:00
8b531b4215
cores: Add code_tmds with TMDS Encoder from Mixxeo/LiteVideo.
2021-03-04 19:32:41 +01:00
10d87e4138
cores/video/VideoPHYs: Use IO primitives.
2021-03-04 18:22:34 +01:00
82d0ecd7bd
cores/video/VideoTerminal: Add CLEAR-XY after reset.
2021-03-04 17:55:37 +01:00
a1e7aab35c
cores/clock/xilinx_usp/USPIDELAYCTRL: Apply USIDELAYCTRL's changes.
2021-03-04 14:42:50 +01:00
enjoy-digital
Marek Czerski
Dolu1990
Hans Baier
Benjamin Henrion
Evan Lojewski
Greg Davill
gatecat
Vamsi Vytla