Hardware
/
litex
mirror of https://github.com/enjoy-digital/litex.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
9,398 Commits 37 Branches 13 Tags 47 MiB
Commit Graph

9398 Commits

Author SHA1 Message Date
Andrew Dennison c2da8de7b0 test_spi_mmap: tests for slot 0&1 2024-04-05 12:35:47 +11:00
Andrew Dennison 07cfda119d interconnect/wishbone: check err in simulation 2024-04-05 12:35:47 +11:00
Andrew Dennison 416f1b4281 cores/spi_mmap: add slot post transfer cs_wait 
Also remove unused slot_status - maintains CSR alignment now that
slot_control is 64 bit (two 32bit registers).
 2024-04-05 12:35:47 +11:00
Andrew Dennison f3b287addd cores/spi_mmap: add 24-bit slot length 2024-04-05 12:31:39 +11:00
Andrew Dennison 5d1fa7b6ca cores/spi_mmap: fix data if bus width > length 
Details:
* 32bit bus write to 8 and 16bit MSB first slot resulted
  in shifted data on mosi.
* 32bit read from 8 and 16bit LSB first slot resulted
  with shifted data in fifo.
Fixes 2 tests - all current tests now pass.
 2024-04-05 12:31:39 +11:00
Andrew Dennison 422b02cc16 cores/spi_mmap: fix data in unused rx_fifo bits 
clear miso at start. Prevent previous transfer data in unused bits
with 8 and 16bit slot lengths and 32bit bus read. Fixes 2 tests.
 2024-04-05 12:31:39 +11:00
Andrew Dennison a9c007d8d7 test/spi_mmap: add some SPIMMAP tests 
Some pass and some fail demonstrating issues observed in driver
development.

run unittest with -v to see more test details.

Ran 9 tests in 4.161s

FAILED (failures=4)
 2024-04-05 12:31:39 +11:00
Andrew Dennison 4bc47c959f test/spi_mmap: lint and autoformat with Ruff 2024-04-05 12:31:39 +11:00
Richard Tucker 2e67f6a1a3 soc/cores/spi_mmap: add read only slot count register 2024-04-05 12:31:39 +11:00
Richard Tucker 3477aeaca1 soc/cores/spi_mmap: add read only version register 2024-04-05 12:31:39 +11:00
Richard Tucker 6170c90459 soc/cores/spi_mmap: adjust CSR mapping to better suit drivers 
Currently the TX_RX_ENGINE CSR register lives below the
slot registers which are dynamic in length (based on how
many slots (chip selects) are configured in the gateware).

Move the TX_RX_ENGINE CSR to above the SLOT configuration
registers so TX_RX_ENGINE never moves.

This makes for an easier and cleaner driver.
 2024-04-05 12:31:39 +11:00
Florent Kermarrec dc78c3f47b soc/interconnect/stream/ClockDomainCrossing: Add a Buffer when same Clk Domains when buffered=True. 2024-04-04 13:02:17 +02:00
enjoy-digital a36fbc86ea
Merge pull request #1911 from davidar/sim-vsync 
sim/video: Add option to render only on frame vsync
 2024-04-02 10:54:05 +02:00
enjoy-digital 7ad444b2a9
Merge pull request #1912 from motec-research/efinity_fix_pin_name 
build/efinix/platform: fix get_pin_name()
 2024-04-02 10:48:19 +02:00
Florent Kermarrec 38a8a171dd integration/builder: Replace soc_core's initialize_memory with optional "init_mems" method. 
Make sure to also attach Builder to SoC to allow easily get/use builder properties in init_mems method.
 2024-04-02 10:43:01 +02:00
Florent Kermarrec 31508ddfa4 soc: Add separators for SoC Main Components. 2024-04-02 10:25:59 +02:00
Florent Kermarrec 06083c7863 soc/init_ram: Define and use contents_size. 2024-04-02 10:21:35 +02:00
Florent Kermarrec ca04858b39 integration/builder: Switch to SoC.init_rom directly and remove initialize_rom that is no longer used. 2024-04-02 10:16:43 +02:00
Florent Kermarrec 175aab73a8 soc/SoC: Add init_ram method from init_rom, allowing initilization of any RAM of the SoC and switch init_rom to it. 2024-04-02 10:09:38 +02:00
Florent Kermarrec 9f49b13f8c soc_core: Minor cosmetic changes. 2024-04-02 09:15:33 +02:00
Florent Kermarrec f181eabebb soc/init_rom: Add SoCError when ROM Size < Contents Size and cosmetic cleanups. 2024-04-02 09:12:03 +02:00
AndrewD 0601bf51c4
Merge pull request #1856 from motec-research/soc_initialize_memory 
soc/builder: add initialize_memory()
 2024-04-02 17:30:12 +11:00
Andrew Dennison 0cb101da25 build/efinix/platform: fix get_pin_name() 
get_pin_name did not include the resource index, so additional core
instances were generated with identical pin names. See below for
examples.

Also only adds slice index for slices with more than one io for cleaner
naming.

("i2c", 0,
    Subsignal("scl", Pins(...)),
    Subsignal("sda", Pins(...)),
),
("i2c", 1,
    Subsignal("scl", Pins(...)),
    Subsignal("sda", Pins(...)),
),

Before:
    output wire          i2c0_oe,
    input  wire          i2c0_scl,
    input  wire          i2c0_sda,
    input  wire          i2c1_scl,
    input  wire          i2c1_sda,
    input  wire          i2c_scl0_IN,
    input  wire          i2c_scl0_IN_1,
    input  wire          i2c_scl0_IN_2,
    output wire          i2c_scl0_OE,
    output wire          i2c_scl0_OE_1,
    output wire          i2c_scl0_OE_2,
    input  wire          i2c_sda0_IN,
    input  wire          i2c_sda0_IN_1,
    input  wire          i2c_sda0_IN_2,
    output wire          i2c_sda0_OE,
    output wire          i2c_sda0_OE_1,
    output wire          i2c_sda0_OE_2,

After:
    output wire          i2c0_oe,
    input  wire          i2c0_scl,
    input  wire          i2c0_scl_IN,
    output wire          i2c0_scl_OE,
    output wire          i2c0_scl_OUT,
    input  wire          i2c0_sda,
    input  wire          i2c0_sda_IN,
    output wire          i2c0_sda_OE,
    output wire          i2c0_sda_OUT,
    input  wire          i2c1_scl,
    input  wire          i2c1_scl_IN,
    output wire          i2c1_scl_OE,
    output wire          i2c1_scl_OUT,
    input  wire          i2c1_sda,
    input  wire          i2c1_sda_IN,
    output wire          i2c1_sda_OE,
    output wire          i2c1_sda_OUT,
 2024-04-02 11:52:31 +11:00
Andrew Dennison a763e82d86 soc/builder: add initialize_memory() 
Allows the target soc to override memory initialization:
  rom and/or ram.
 2024-04-02 11:37:31 +11:00
David A Roberts 5d2676482f sim/video: Add option to render only on frame vsync 2024-03-29 11:24:16 +10:00
Florent Kermarrec 87137c3027 CHANGES.md: Update. 2024-03-28 14:24:12 +01:00
enjoy-digital 7b0985a6bc
Merge pull request #1909 from davidar/sim-rgba 
sim/video: Change pixel format to RGBA
 2024-03-28 14:21:24 +01:00
enjoy-digital c73f310179
Merge pull request #1908 from Irvise/neorv32_update 
Update NeoRV32 CPU to v1.9.7
 2024-03-28 14:20:59 +01:00
Florent Kermarrec 60920f3c7d integration/export: Also fix MockCSRRegion base definition. 2024-03-27 17:09:33 +01:00
Florent Kermarrec e74b7f7ebe integration/export: Fix MockCSRRegion C header export. 
Use full address for export since when used, CSR_BASE is related to the top level SoC and not to the imported external mapping.
 2024-03-27 16:49:09 +01:00
David A Roberts 1895dd36e2 tools/litex_sim: Add --with-video-colorbars option 2024-03-26 20:23:51 +10:00
David A Roberts 6735728340 sim/video: Change pixel format to RGBA 2024-03-26 20:22:58 +10:00
Florent Kermarrec 4389742a4f CHANGES.md: Update. 2024-03-25 19:10:40 +01:00
Fernando Oleo Blanco 40ff2da45c Update NeoRV32 CPU to v1.9.7 2024-03-23 10:18:07 +01:00
Gwenhael Goavec-Merou 9156d7902e tools/litex_json2dts_linux: increment interrupts value by one for rocket 2024-03-21 20:54:08 +01:00
Gwenhael Goavec-Merou 68108e396d tools/litex_json2dts_linux: added isa-base,isa-extensions required by kernel > 6.6.0 in replacement to isa 2024-03-21 20:53:19 +01:00
enjoy-digital 29aa8f0771
Merge pull request #1906 from jdavidberger/master 
Avoid extra timing delays for NXLRAM path
 2024-03-21 09:14:39 +01:00
jdavidberger c640efcec3 Avoid extra timing delays for NXLRAM path 2024-03-20 14:58:08 -06:00
Gwenhael Goavec-Merou 8f04542c15 Revert "build/openocd: Allow config file to be searched from local dirs" 
This reverts commit a7d441488c.
 2024-03-20 16:44:58 +01:00
Gwenhael Goavec-Merou 46ff7cdee5
Merge pull request #1901 from FlyGoat/zynq7000_openocd 
Zynq7000 litex_server OpenOCD JTAG fixes
 2024-03-20 16:41:22 +01:00
Florent Kermarrec c2fd1e9a49 litex_json2dts_linux: Switch to cpu_name instead of cpu_human_name. 2024-03-08 18:53:44 +01:00
Florent Kermarrec 49f12ea297 soc/add_cpu: Add CPU_NAME constant. 2024-03-08 18:51:26 +01:00
Jiaxun Yang a7d441488c build/openocd: Allow config file to be searched from local dirs 
To sort out path for boards using OpenOCD config file shipped with
OpenOCD itself.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
 2024-03-07 19:54:04 +00:00
enjoy-digital 94e644ba92
Merge pull request #1902 from trabucayre/rocket_update 
Rocket update
 2024-03-07 13:38:02 +01:00
Gwenhael Goavec-Merou 68991b6a40 tools/litex_json2dts_linux: added missing rocket's nodes (align to pythondata-cpu-rocket dts) 2024-03-07 11:59:48 +01:00
Gwenhael Goavec-Merou 54f8d90d38 soc/cores/cpu/rocket/core: align config (XCACHE, XTLB) to pythondata-cpu-rocket master 2024-03-07 09:00:32 +01:00
Florent Kermarrec 149080fc8b cpu/naxriscv/core: Minor cleanups and add xlen to human_name. 2024-03-06 16:01:38 +01:00
Jiaxun Yang 18720e29cc build/openocd: Fix tap name for zynq_7000 
zynq_7000 have a special tap name fpr PL defined in openocd
config file.

Just hardcode it here.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
 2024-03-05 21:44:55 +00:00
Jiaxun Yang 35dd87499c build/openocd: Disable polling after init 
OpenOCD's event polling mechanism may interfere with
jtagstream, as we don't expect any command sent by
openocd itself.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
 2024-03-05 21:34:56 +00:00
enjoy-digital f304cba8a6
Merge pull request #1897 from machdyne/master 
support TQFP144 ECP5 package
 2024-03-05 21:26:22 +01:00