31cc7f1e42
cores/stream/monitor: Fix typo
2021-03-10 09:11:07 +10:30
0e7d8219ea
soc/cores/gpio: Simplify GPIOIn IRQ, make polarity configurable and also add optional IRQ to GPIOTristate.
...
Ex of instance:
from litex.soc.cores import gpio
gpio_in_pads = Signal(16)
self.submodules.gpio_in = gpio.GPIOIn(gpio_in_pads, with_irq=True)
self.add_csr("gpio_in")
2021-03-09 13:57:48 +01:00
0d8b6f8fbb
csr_eventmanager/EventSourceProcess: Add Rising Edge support and Falling/Rising selection.
2021-03-09 13:55:43 +01:00
ece9005949
cpu/vexriscv/core: Rename timer_enabled parameter to with_timer (for consistency with codebase) and disable timer by default (since increasing resources and causing issue on some iCE40 designs).
2021-03-09 09:07:52 +01:00
834c90b71f
Merge pull request #841 from gatecat/radiant_pins_x
...
build/radiant: Skip location constraint for X pins
2021-03-08 16:30:22 +01:00
c64e2d3a85
build/radiant: Skip location constraint for X pins
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-08 14:27:32 +00:00
5af8e5c934
soc/add_etherbone: Fix UDPIPCore clock domain (should still run at eth_clk even if Etherbone is running in sys_clk) since data-width convertion is done on UDP.
2021-03-08 13:50:22 +01:00
6bb0541f9a
Remove ussysmon.py as it is consolidated inside xadc.py
2021-03-06 14:31:24 -08:00
a1e54671be
sim/serial2console: Remove \r workaround since no longer required and generating double carrier return in simulation.
2021-03-06 17:36:21 +01:00
7e3912aaef
software/demo: Make hellocpp optional (only build with --with-cxx) to avoid adding g++ as a dependency for an optional feature.
2021-03-06 17:31:07 +01:00
647d3eb51a
soc/cores/xadc.py: Move ussysmon here
2021-03-06 08:14:13 -08:00
31ac6659c9
cores/video: Add VideoS7HDMIPHY for Xilinx 7-Series.
2021-03-05 14:30:28 +01:00
9624cce188
cores/video: Mode VideoVGAPHY/VideoDVIPHY and add separators.
2021-03-05 14:27:08 +01:00
0280a9dd57
soc/add_video_framebuffer: Pass clock_domain to VideoFrameBuffer.
2021-03-05 14:23:39 +01:00
8b531b4215
cores: Add code_tmds with TMDS Encoder from Mixxeo/LiteVideo.
2021-03-04 19:32:41 +01:00
10d87e4138
cores/video/VideoPHYs: Use IO primitives.
2021-03-04 18:22:34 +01:00
82d0ecd7bd
cores/video/VideoTerminal: Add CLEAR-XY after reset.
2021-03-04 17:55:37 +01:00
a1e7aab35c
cores/clock/xilinx_usp/USPIDELAYCTRL: Apply USIDELAYCTRL's changes.
2021-03-04 14:42:50 +01:00
60e2d3335f
cores/clock/xilinx_us: Remove USP modules (refactoring issue).
2021-03-04 14:42:03 +01:00
2d5b4b206b
bios: Add VideoFrameBuffer VTG/DMA initialisation.
...
This just configures the enables for now since other parameters are pre-configured
during the build.
2021-03-04 12:01:32 +01:00
f553b5fc83
soc/cores/video: Improve/Cleanup VideoFrameBuffer, disable by default and modify default hres/vres to 800/600.
2021-03-04 11:59:44 +01:00
0ee92448b9
soc/cores/dma: Add default parameters to add_csr (similar to LiteDRAMDMAs), minor cosmetic cleanups and also add offset CSRStatus on WishboneDMAWriter (for symetry with WishboneDMAReader).
...
Defaults parameters can allow the FPGA gateware to behave by itself after initialization while still being configurable by software.
2021-03-04 11:53:43 +01:00
225a518f7e
soc/cores/video: Move LiteDRAMDMAReader import to VideoFramerBuffer to avoid LiteDRAM dependency.
2021-03-04 08:40:47 +01:00
ae5f67f6f0
litex/soc/cores/ussysmon.py: minor bug
2021-03-03 14:47:52 -08:00
1793efb50b
litex/soc/cores/ussysmon.py: dadr address space bump
2021-03-03 14:38:27 -08:00
ccc8916995
soc/cores/video: Add initial (and simple) VideoFrameBuffer core.
2021-03-03 19:58:11 +01:00
922f85e64b
litex/soc/cores/ussysmon.py: ADC transfer function
2021-03-03 10:50:58 -08:00
24fb153fa1
soc/integration: Add add_video_terminal method to LiteXSoC.
...
Adds the new LiteX's VideoTerminal core to the SoC:
self.submodules.videophy = VideoVGAPHY(platform.request("vga"), clock_domain="vga")
self.add_video_terminal(phy=self.videophy, timings="800x600@60Hz", clock_domain="vga")
2021-03-03 17:45:02 +01:00
35ffba8801
soc/cores: Add simple VideoOut core with VideoTimingGenerator, Video Patterns, VideoTerminal, VideoDVIPHY and VideoVGAPHY.
2021-03-03 16:17:12 +01:00
c5ee6741a0
software/liblitedram: Use new DQS delay reset procedure on Ultrascale(+) (by increments).
2021-03-03 11:32:43 +01:00
d3407c67b1
build/sim/core: Cast main_time to vluint64_t to avoid ambiguity error of the dump function to be used.
2021-03-03 09:25:54 +01:00
134c628357
cores/spi_flash: Minor cosmetic cleanups, SpiFlashQuadReadWrite has also been moved to the end with a Note since should probably be re-factored.
2021-03-03 09:15:51 +01:00
61dcd1e8fd
soc/cores/led: Minor cosmetic cleanups.
2021-03-03 09:02:41 +01:00
19b1e50cbd
soc/cores/icap: Minor cosmetic cleanups.
2021-03-03 09:01:41 +01:00
e6f1d677e7
soc/cores/freqmeter: Minor cosmetic cleanups.
2021-03-03 08:59:51 +01:00
ce5e3e3b93
soc/cores/ecc: Minor cosmetic cleanups.
2021-03-03 08:55:37 +01:00
2fd7451fc9
soc/cores/code_8b10b: Minor cosmetic cleanups.
2021-03-03 08:54:31 +01:00
2e531e0ec7
soc/cores/dna: Add separator/comment.
2021-03-03 08:49:47 +01:00
71f7ce6a57
soc/cores/ussysmon.py: Xilinx XADC like thingy for UltraScale devices
2021-03-02 20:31:52 -08:00
c23e8813fc
Merge pull request #836 from hplp/master
...
demo with c++ HW example
2021-03-02 09:13:10 +01:00
7fd39235af
Merge pull request #1 from hplp/cppdemo
...
demo with basic C and C++ examples
2021-03-02 01:31:46 -05:00
769f36d468
extend demo with basic C and C++ examples
2021-03-02 01:28:21 -05:00
415bf63594
Merge pull request #830 from dayjaby/vexriscv_mem_map
...
VexRiscv: More general mem_map
2021-03-01 11:15:56 +01:00
ceb8a6502c
VexRiscv: More general mem_map
2021-02-25 10:36:43 +01:00
6e883b4513
tools/litex_sim: Add boot to main_ram when sdram_init contents provided.
2021-02-25 09:10:26 +01:00
8f5d2ba27f
tools/litex_sim: Disable SDRAM memtest when sdram_init contents provided.
...
This avoid corrupting pre-initialized contents or disabling memtest manually.
2021-02-25 09:06:26 +01:00
80bd4ac4ec
bios: Add boot command to be able to boot directly from system memory.
...
This is useful for un-usual boot sequences where the binaries are not
loaded directly by the BIOS but externally (over a bridge for example).
Example of use:
$litex_sim
$litex_bare_metal_demo --build-path=build/sim
$litex_sim --ram-init=demo.bin
Press Esc during the LiteX boot.
litex> help
LiteX BIOS, available commands:
flush_cpu_dcache - Flush CPU data cache
crc - Compute CRC32 of a part of the address space
ident - Identifier of the system
help - Print this help
serialboot - Boot from Serial (SFL)
romboot - Boot from ROM
reboot - Reboot
boot - Boot from Memory
mem_speed - Test memory speed
mem_test - Test memory access
mem_copy - Copy address space
mem_write - Write address space
mem_read - Read address space
mem_list - List available memory regions
litex>
litex> mem_list
Available memory regions:
ROM 0x00000000 0x8000
SRAM 0x01000000 0x2000
MAIN_RAM 0x40000000 0x10000000
CSR 0x82000000 0x10000
litex>
litex> boot 0x40000000
Executing booted program at 0x40000000
--============= Liftoff! ===============--
LiteX minimal demo app built Feb 24 2021 11:30:05
Available commands:
help - Show this command
reboot - Reboot CPU
donut - Spinning Donut demo
litex-demo-app>
2021-02-24 11:41:01 +01:00
c18ea700cc
Merge pull request #822 from antmicro/bios-dynamic-ip
...
software/bios: add an option to change ip and mac address in runtime
2021-02-24 09:27:48 +01:00
7abd66d710
bios/boot: add functions changing local and remote IP in runtime
2021-02-23 20:52:53 +01:00
1c8df130b4
integration/soc.py: add parameter dynamic_ip to add_ethernet
2021-02-23 20:52:53 +01:00
Greg Davill
Florent Kermarrec
gatecat
Vamsi Vytla
Sergiu Mosanu
David Jablonski
Aleksandra Swierkowska