e516ff3452
vcu118/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:51 +01:00
9d2ca50c5f
kcu105/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:35 +01:00
83d2c71099
platforms/vcu118: add missing Internal Vref configuration on DDR4 C1/C2 banks
2020-02-25 18:32:42 +01:00
4a84e9b08a
targets/colorlight_5a_75b: add instruction to build/load and use bitstream with wishbone-tool
2020-02-25 12:47:08 +01:00
f279fe9d33
vc707: cleanup platform/targets, remove Ethernet support (no Ethernet pads defined)
2020-02-25 10:35:18 +01:00
3581df5af6
vc707: cleanup platform/targets, remove Ethernet support (SGMII is not currently supported)
2020-02-25 09:41:53 +01:00
88a1f80db1
vc707/vcu118: use proper copyrights
2020-02-25 09:03:52 +01:00
e34654fc8c
Merge pull request #46 from fei-g/master
...
add new board files for VC707 and VCU118
2020-02-25 08:46:52 +01:00
373e74f435
add new board files for VC707 and VCU118, only specified limited ports for VCU118, including clock, reset and DDR4
2020-02-24 14:20:47 -05:00
133f735e1f
Merge pull request #45 from trabucayre/fix_colorlight5A-75B_SDRAM
...
platforms/colorlight_5a_75b.py: fix sdram_clock and sdram a pins
2020-02-24 08:30:18 +01:00
2cf4e084ec
platforms/colorlight_5a_75b.py: fix sdram_clock and sdram a pins
2020-02-23 10:01:41 +01:00
f72e7bd314
Merge pull request #41 from lromor/fix-wrong-import
...
Changed wrong imports for fomu board.
2020-02-12 18:48:13 +07:00
ec30cc05c3
Changed wrong imports for fomu board.
2020-02-12 12:40:07 +01:00
c94360c2e0
targets: avoid direct use of mem_decoder.
2020-02-11 21:59:42 +01:00
4edf196911
targets/EthernetSoC: be sure memory region is added before adding Wishbone Slave (required by new SoC)
2020-02-11 17:45:35 +01:00
83c48946ad
test/test_targets: make sure all platforms are tested.
2020-02-03 10:04:14 +01:00
c3d8c7462d
test/test_targets: update
2020-02-03 09:44:22 +01:00
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00
7a24406b2e
targets: fomu: fix compatibility for when a cpu is added
...
Things weren't quite right for adding a CPU. This fixes that by
correcting the placer arguments, memory map, and USB type.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-02-03 08:58:54 +08:00
0627f55dca
de10nano: cleanup a bit, rename SDRAMSoC to MiSTerSDRAMSoC and argument to --with-mister-sdram to make it clear that it's using the MiSTer SDRAM extension board.
2020-01-31 09:29:02 +01:00
cf9a9ff91b
de10nano: update copyrights, remove trailing whitespaces
2020-01-31 09:13:36 +01:00
4f85d50ff5
Merge pull request #39 from sajattack/de10nano
...
Add de10 nano board
2020-01-31 09:08:19 +01:00
36e1f1fe75
rename sw to user_sw
2020-01-30 05:01:46 -08:00
1631b071c3
finish up sdram, passes memtest
2020-01-30 03:41:44 -08:00
5091a1b40a
WIP sdram module option
2020-01-29 13:59:57 -08:00
3a6a9258ce
add de10 nano board
...
add iostandard to hdmi
2020-01-29 00:21:51 -08:00
2ec6bc0bdc
colorlight_5a_75b: add disclaimer
2020-01-23 14:13:13 +01:00
55c0b781e4
colorlight_5a_75b: revert rx_delay to 2ns, improve comment (thanks @tnt)
2020-01-23 13:16:36 +01:00
4fb89fc9c5
colorlight_5a_75b: set RGMII tx/rx_delay to 0ns in the FPGA (added by PCB/PHY)
2020-01-23 09:39:48 +01:00
dcc65b347d
targets/colorlight_5a_75b: switch to SoCCore, CPU and Etherbone working :)
...
Tested with:
./colorlight_5a_75b.py --cpu-type=picorv32 --uart-name=crossover --with-etherbone --csr-csv=csr.csv
Load with following script:
#!/usr/bin/env python3
# Load ---------------------------------------------------------------------------------------------
def load():
import os
f = open("openocd.cfg", "w")
f.write(
"""
interface ftdi
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0098 0x008b
reset_config none
adapter_khz 25000
jtag newtap ecp5 tap -irlen 8 -expected-id 0x41111043
""")
f.close()
os.system("openocd -f openocd.cfg -c \"transport select jtag; init; svf soc_etherbonesoc_colorlight_5a_75b/gateware/top.svf; exit\"")
exit()
if __name__ == "__main__":
load()
Then start lxserver:
lxserver --udp
And run following script:
#!/usr/bin/env python3
import sys
from litex import RemoteClient
wb = RemoteClient()
wb.open()
# # #
while True:
if wb.regs.uart_xover_rxempty.read() == 0:
print(chr(wb.regs.uart_xover_rxtx.read()), end="")
sys.stdout.flush()
# # #
wb.close()
2020-01-22 15:57:52 +01:00
c07e4a6b3a
colorlight_5a_75b: fix rst_n
2020-01-22 14:57:48 +01:00
8da8ed7a0e
colorlight_5a_75b/v7.0: update eth_clocks/rx pinout, remove FIXME
2020-01-22 14:56:17 +01:00
bb805999cb
platforms/colorlight_5a_75b: fix 6.1 used_led_n/user_btn_n thanks @smunaut
2020-01-22 12:43:37 +01:00
43badd162e
colorlight_5a_75b/v6.1: add led/btn and remove FIXME on sdram now that clarified
2020-01-22 11:05:08 +01:00
1d9e349093
partner: add colorlight_5a_75b initial support
2020-01-22 09:51:00 +01:00
07067301d5
targets/linsn_rv901t: cleanup arguments
2020-01-22 09:04:28 +01:00
8113b491db
aller/nereid/tagus: update litepcie
2020-01-21 21:26:23 +01:00
684c1640bb
add Linsn RV901T support
2020-01-18 21:40:04 +01:00
0e4569a48a
platforms/camlink_4k: remove #!/usr/bin/env python3
2020-01-18 21:35:18 +01:00
e72cd1468c
platforms/ac701: fix eth indent
2020-01-18 21:34:50 +01:00
908539d49f
targets/nexys4ddr: fix typo
2020-01-17 13:15:22 +01:00
bb99a8dd0c
targets/kcu105: remove main_ram_size_limit
2020-01-17 12:09:53 +01:00
84164f8fab
Copying .gitignore from LiteX repo.
2020-01-16 22:40:05 +10:00
eca9bf10ae
mimas_v7: cleanup, make it similar to others boards
2020-01-16 11:24:09 +01:00
54f39b600a
mimas_a7: fix copyrights
2020-01-16 11:02:11 +01:00
8d298951a8
Merge pull request #37 from feliks-montez/master
...
Add Mimas A7 board support
2020-01-16 11:00:32 +01:00
f9619c4a8f
aller/tagus/nereid: use crossover UART, rename SoC to PCIe SoC and pass soc_sdram_argdict to PCIeSoC
2020-01-16 10:51:35 +01:00
fd1e655700
targets: cleanup EthernetSoC
2020-01-16 10:28:09 +01:00
0e6ef06494
Merge branch 'feature/add-mimas-a7-support'
2020-01-14 23:31:35 -05:00
206ec34551
platforms/mimas_a7: add support
2020-01-14 23:31:03 -05:00
Florent Kermarrec
Fei Gao
Gwenhael Goavec-Merou
Sean Cross
Leonardo Romor
Paul Sajna
Tim 'mithro' Ansell
Feliks