Commit Graph

9630 Commits

Author SHA1 Message Date
Florent Kermarrec a95f1b8486 cores/hyperbus: Make latency dynamically configurable. 2024-04-15 12:06:11 +02:00
Florent Kermarrec 6216bd4e99 cores/hyperbus: Add latency_mode parameter and test different latencies/modes in simulation. 2024-04-15 10:32:13 +02:00
Florent Kermarrec 33a1fcda48 software/bios: Do minimal reconfiguration for variable latency and start testing latency cycles re-configuration. 2024-04-12 19:35:31 +02:00
Florent Kermarrec f8c59c03e3 cores/hyperbus: Add variable latency support (working on ti60 f225). 2024-04-12 18:50:19 +02:00
Florent Kermarrec b192103822 cores/hyperbus: Fix bytes order on register writes. 2024-04-12 16:06:26 +02:00
Florent Kermarrec fb519ac260 test/test_hyperbus: Add test_hyperram_reg_write. 2024-04-12 15:21:57 +02:00
Florent Kermarrec a32db7abad cores/hyperbus: Add with_csr parameter to make Register interface optional. 2024-04-12 15:21:32 +02:00
enjoy-digital 2d1dd45fd2
Merge pull request #1919 from nrndda/uart_tx_irq_handling_fix
Uart tx irq handling fix
2024-04-12 10:45:12 +02:00
enjoy-digital 2bc41928a3
Merge pull request #1916 from motec-research/spi_mmap
SPIMMAP bug fixes and new features
2024-04-12 10:38:05 +02:00
enjoy-digital a891b2dd11
Merge pull request #1904 from machdyne/master
litex_json2dts_linux: Add support for multiple Ethernet interfaces
2024-04-12 10:32:12 +02:00
enjoy-digital 5d895bd3a7
Merge branch 'master' into master 2024-04-12 10:32:05 +02:00
Florent Kermarrec 441d05ee36 core/hyperbus: Start testing Register writes. 2024-04-11 18:39:48 +02:00
Florent Kermarrec 59756b4342 cores/hyperbus: Test and fix HyperRAM register read accesses.
Seems OK:
Identification Register 0 : 00000e76
Identification Register 1 : 00000009
Configuration Register 0  : 00008f2f
Configuration Register 1  : 0000ffc1
reg_control: 302
reg_status:  2
reg_debug:   8
2024-04-11 18:29:48 +02:00
Florent Kermarrec 2384d6fbd4 cores/hyperbus: Add initial HyperRAM Register access over CSRs.
Will be used to get HyperRAM characteristics and also to configure latency and enable varialble latency.

Untested yet.
2024-04-11 17:51:47 +02:00
Gwenhael Goavec-Merou b8ca87ece5 build/openocd: disabled 'poll off' because not supported by ECP5 2024-04-11 15:13:52 +02:00
Dolu1990 62cf95c5da cpu/vexii add git 2024-04-10 12:21:47 +02:00
Dolu1990 555f89c22a set default l2 ways to 4 2024-04-08 17:16:15 +02:00
Dolu1990 9654b40864 Got litex dma to work with vexii 2024-04-08 16:45:15 +02:00
Dolu1990 8f86108eed tools/litex_json2dts add vexiiriscv 2024-04-08 14:40:44 +02:00
Dmitry Derevyanko 6885770e47 Uart tx irq handling fix 2024-04-07 17:39:30 +03:00
Gwenhael Goavec-Merou 3864615f6f tools/litex_json2dts_linux.py: improved cpu_isa_extension attribute (fdc) and fixed kernel panic during rocket booting with linux 2024-04-06 08:13:56 +02:00
Florent Kermarrec 06009c57a3 build/xilinx/common: Fix missing clk parameter on XilinxSDRTristateImpl. 2024-04-05 16:04:29 +02:00
Andrew Dennison 5ae098ebc6 test/spi_mmap: be less verbose
don't print miso/mosi changes with -v
2024-04-05 12:35:47 +11:00
Andrew Dennison c2da8de7b0 test_spi_mmap: tests for slot 0&1 2024-04-05 12:35:47 +11:00
Andrew Dennison 07cfda119d interconnect/wishbone: check err in simulation 2024-04-05 12:35:47 +11:00
Andrew Dennison 416f1b4281 cores/spi_mmap: add slot post transfer cs_wait
Also remove unused slot_status - maintains CSR alignment now that
slot_control is 64 bit (two 32bit registers).
2024-04-05 12:35:47 +11:00
Andrew Dennison f3b287addd cores/spi_mmap: add 24-bit slot length 2024-04-05 12:31:39 +11:00
Andrew Dennison 5d1fa7b6ca cores/spi_mmap: fix data if bus width > length
Details:
* 32bit bus write to 8 and 16bit MSB first slot resulted
  in shifted data on mosi.
* 32bit read from 8 and 16bit LSB first slot resulted
  with shifted data in fifo.
Fixes 2 tests - all current tests now pass.
2024-04-05 12:31:39 +11:00
Andrew Dennison 422b02cc16 cores/spi_mmap: fix data in unused rx_fifo bits
clear miso at start. Prevent previous transfer data in unused bits
with 8 and 16bit slot lengths and 32bit bus read. Fixes 2 tests.
2024-04-05 12:31:39 +11:00
Andrew Dennison a9c007d8d7 test/spi_mmap: add some SPIMMAP tests
Some pass and some fail demonstrating issues observed in driver
development.

run unittest with -v to see more test details.

Ran 9 tests in 4.161s

FAILED (failures=4)
2024-04-05 12:31:39 +11:00
Andrew Dennison 4bc47c959f test/spi_mmap: lint and autoformat with Ruff 2024-04-05 12:31:39 +11:00
Richard Tucker 2e67f6a1a3 soc/cores/spi_mmap: add read only slot count register 2024-04-05 12:31:39 +11:00
Richard Tucker 3477aeaca1 soc/cores/spi_mmap: add read only version register 2024-04-05 12:31:39 +11:00
Richard Tucker 6170c90459 soc/cores/spi_mmap: adjust CSR mapping to better suit drivers
Currently the TX_RX_ENGINE CSR register lives below the
slot registers which are dynamic in length (based on how
many slots (chip selects) are configured in the gateware).

Move the TX_RX_ENGINE CSR to above the SLOT configuration
registers so TX_RX_ENGINE never moves.

This makes for an easier and cleaner driver.
2024-04-05 12:31:39 +11:00
Florent Kermarrec dc78c3f47b soc/interconnect/stream/ClockDomainCrossing: Add a Buffer when same Clk Domains when buffered=True. 2024-04-04 13:02:17 +02:00
enjoy-digital a36fbc86ea
Merge pull request #1911 from davidar/sim-vsync
sim/video: Add option to render only on frame vsync
2024-04-02 10:54:05 +02:00
enjoy-digital 7ad444b2a9
Merge pull request #1912 from motec-research/efinity_fix_pin_name
build/efinix/platform: fix get_pin_name()
2024-04-02 10:48:19 +02:00
Florent Kermarrec 38a8a171dd integration/builder: Replace soc_core's initialize_memory with optional "init_mems" method.
Make sure to also attach Builder to SoC to allow easily get/use builder properties in init_mems method.
2024-04-02 10:43:01 +02:00
Florent Kermarrec 31508ddfa4 soc: Add separators for SoC Main Components. 2024-04-02 10:25:59 +02:00
Florent Kermarrec 06083c7863 soc/init_ram: Define and use contents_size. 2024-04-02 10:21:35 +02:00
Florent Kermarrec ca04858b39 integration/builder: Switch to SoC.init_rom directly and remove initialize_rom that is no longer used. 2024-04-02 10:16:43 +02:00
Florent Kermarrec 175aab73a8 soc/SoC: Add init_ram method from init_rom, allowing initilization of any RAM of the SoC and switch init_rom to it. 2024-04-02 10:09:38 +02:00
Florent Kermarrec 9f49b13f8c soc_core: Minor cosmetic changes. 2024-04-02 09:15:33 +02:00
Florent Kermarrec f181eabebb soc/init_rom: Add SoCError when ROM Size < Contents Size and cosmetic cleanups. 2024-04-02 09:12:03 +02:00
AndrewD 0601bf51c4
Merge pull request #1856 from motec-research/soc_initialize_memory
soc/builder: add initialize_memory()
2024-04-02 17:30:12 +11:00
Andrew Dennison 0cb101da25 build/efinix/platform: fix get_pin_name()
get_pin_name did not include the resource index, so additional core
instances were generated with identical pin names. See below for
examples.

Also only adds slice index for slices with more than one io for cleaner
naming.

("i2c", 0,
    Subsignal("scl", Pins(...)),
    Subsignal("sda", Pins(...)),
),
("i2c", 1,
    Subsignal("scl", Pins(...)),
    Subsignal("sda", Pins(...)),
),

Before:
    output wire          i2c0_oe,
    input  wire          i2c0_scl,
    input  wire          i2c0_sda,
    input  wire          i2c1_scl,
    input  wire          i2c1_sda,
    input  wire          i2c_scl0_IN,
    input  wire          i2c_scl0_IN_1,
    input  wire          i2c_scl0_IN_2,
    output wire          i2c_scl0_OE,
    output wire          i2c_scl0_OE_1,
    output wire          i2c_scl0_OE_2,
    input  wire          i2c_sda0_IN,
    input  wire          i2c_sda0_IN_1,
    input  wire          i2c_sda0_IN_2,
    output wire          i2c_sda0_OE,
    output wire          i2c_sda0_OE_1,
    output wire          i2c_sda0_OE_2,

After:
    output wire          i2c0_oe,
    input  wire          i2c0_scl,
    input  wire          i2c0_scl_IN,
    output wire          i2c0_scl_OE,
    output wire          i2c0_scl_OUT,
    input  wire          i2c0_sda,
    input  wire          i2c0_sda_IN,
    output wire          i2c0_sda_OE,
    output wire          i2c0_sda_OUT,
    input  wire          i2c1_scl,
    input  wire          i2c1_scl_IN,
    output wire          i2c1_scl_OE,
    output wire          i2c1_scl_OUT,
    input  wire          i2c1_sda,
    input  wire          i2c1_sda_IN,
    output wire          i2c1_sda_OE,
    output wire          i2c1_sda_OUT,
2024-04-02 11:52:31 +11:00
Andrew Dennison a763e82d86 soc/builder: add initialize_memory()
Allows the target soc to override memory initialization:
  rom and/or ram.
2024-04-02 11:37:31 +11:00
David A Roberts 5d2676482f sim/video: Add option to render only on frame vsync 2024-03-29 11:24:16 +10:00
Florent Kermarrec 87137c3027 CHANGES.md: Update. 2024-03-28 14:24:12 +01:00
enjoy-digital 7b0985a6bc
Merge pull request #1909 from davidar/sim-rgba
sim/video: Change pixel format to RGBA
2024-03-28 14:21:24 +01:00