3df677cfeb
Add initial Analog Pocket platform/target with Clk/SDRAM, able to run a simple SoC with SDRAM over JTAG-UART.
...
$ ./analog_pocket.py --uart-name=jtag_uart --build --load
$ litex_term jtag --jtag-config=openocd_usb_blaster.cfg
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2023 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Sep 21 2023 08:53:57
BIOS CRC passed (1e2b3f44)
LiteX git sha1: 7d738737
--=============== SoC ==================--
CPU: VexRiscv @ 50MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128.0KiB
SRAM: 8.0KiB
L2: 8.0KiB
SDRAM: 64.0MiB 16-bit @ 50MT/s (CL-2 CWL-2)
MAIN-RAM: 64.0MiB
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 15.6MiB/s
Read speed: 22.1MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex>
2023-09-21 09:19:57 +02:00
531e13dcd6
prog: Remove too specific openocd_max10_blaster/2.cfg.
2023-09-21 09:17:00 +02:00
5064c65dac
targets: Switch to openocd_usb_blaster/2.cfg.
2023-09-21 09:16:24 +02:00
33d1569fb8
prog: Add generic openocd_usb_blaster/2 OpenOCD config files.
2023-09-21 09:15:30 +02:00
a0b7811c54
platforms/ti60_f225: Add n parameter to rgmii_ethernet_qse_ios to allow having multiple adapters.
2023-09-11 10:45:28 +02:00
b92c96b3a4
colorlight_i9plus: Cosmetic cleanups.
2023-08-30 17:22:11 +02:00
3471617878
Merge pull request #502 from chmousset/add_colorlight_i9plus
...
[init] added colorlight i9+ based on XC7A50 FPGA
2023-08-30 16:54:26 +02:00
c960e85d11
targets/efinix: Now rely in LiteX to automatically exclude Tristate IOs.
2023-08-30 09:59:23 +02:00
4bb064853d
targets/efinix: Update RGMII PHYs (IOs are now directly excluded in PHYs).
2023-08-30 08:56:20 +02:00
347b477b07
sipeed_tang_primer_20k: Fix DDR3 module, SoC reset and remove DDR3 debug code.
...
Now passing memtest with valid reported memory size:
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2023 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS CRC passed (d32a9529)
LiteX git sha1: 85dadb82
--=============== SoC ==================--
CPU: VexRiscv SMP-LINUX @ 48MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 64.0KiB
SRAM: 6.0KiB
L2: 512B
SDRAM: 128.0MiB 16-bit @ 192MT/s (CL-6 CWL-5)
MAIN-RAM: 128.0MiB
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
m0, b00: |00000000| delays: -
m0, b01: |00000000| delays: -
m0, b02: |01100000| delays: 01+-00
m0, b03: |00000000| delays: -
best: m0, b02 delays: 01+-00
m1, b00: |00000000| delays: -
m1, b01: |00000000| delays: -
m1, b02: |01100000| delays: 01+-00
m1, b03: |00000000| delays: -
best: m1, b02 delays: 01+-00
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 11.7MiB/s
Read speed: 17.4MiB/s
2023-08-29 16:50:17 +02:00
4862d0667c
Merge pull request #515 from josuah/crosslink_nx_openocd
...
Allow use of OpenOCD for the Crosslink-NX
2023-08-28 16:35:20 +02:00
6e7f58f2df
Merge pull request #524 from josuah/crosslink_nx_main_ram
...
targets/lattice_crosslink_nx_evn: add main_ram section for firmware
2023-08-28 16:34:34 +02:00
232e829b8f
Merge branch 'master' into crosslink_nx_main_ram
2023-08-28 16:34:27 +02:00
a9ecbffe8f
Merge pull request #520 from josuah/crosslink_nx_prog_flash
...
targets/lattice_crosslink_nx_evn: fix arguments in flash programming
2023-08-28 16:33:23 +02:00
387e361a55
Merge pull request #521 from josuah/crosslink_nx_spi_flash
...
platforms/crosslink_nx_evn: add SPI flash support
2023-08-28 16:33:02 +02:00
2c3d77b5be
Merge branch 'master' into crosslink_nx_spi_flash
2023-08-28 16:32:37 +02:00
efb76133be
Merge pull request #519 from josuah/fix_crosslink_nx_uartbone
...
Crosslink-NX EVN: fix UARTBone always disabled
2023-08-28 16:31:29 +02:00
5799c35247
platforms/gsd_orangecrab: Set alt point to DFUProg.
2023-08-28 16:28:04 +02:00
a5a6a313cc
targets/lattice_crosslink_nx_evn: add main_ram section for firmware
...
This takes the values from the Antmicro SDI MIPI converter as a model
and is enough to run a Zephyr hello world, but not seemingly enough for
a the Zephyr Shell sample.
Related: https://github.com/litex-hub/zephyr-on-litex-vexriscv/pull/13
2023-08-18 19:56:58 +02:00
2e5c6eb7a7
platforms/crosslink_nx_evn: add SPI flash support
2023-08-11 16:46:52 +02:00
1a46bcce5e
targets/lattice_crosslink_nx_evn: fix arguments in flash programming
2023-08-10 14:39:01 +02:00
3c0b6956cc
platforms/crosslink_nx_evn: Fix 5412d0e always disabling uartbone
...
Also fix a warning about register_mem being deprecated, taking
inspiration from platforms/crosslink_nx_vip
2023-08-09 18:07:13 +02:00
8172a304b3
platforms/crosslink_nx_evn: allow use of OpenOCD
2023-08-08 23:25:41 +02:00
3903cdee92
Merge pull request #517 from bayi/master
...
Digilent CMOD A7 ISSIRAM fix
2023-08-08 19:29:32 +02:00
9acc349893
Merge pull request #516 from josuah/crosslink_nx_uartbone
...
platforms/crosslink_nx_evn: allow use of UARTBone
2023-08-08 19:28:41 +02:00
4362cb23a1
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:32 +02:00
a6b025f7f3
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:15 +02:00
5412d0e0e9
platforms/crosslink_nx_evn: allow use of UARTBone
...
This goes along a small resistor jumper modification and firmware flashing like
it is for the ECP5 board. A warning message is added as the default serial might
be affected (--serial serial by default). The FTDI modification software used
for the ECP5 seems to be requried and matching.
This can be tested this way:
targets/lattice_crosslink_nx_evn.py --csr-csv=csr.csv --toolchain=oxide --programmer=openocd --uart-name crossover+uartbone --build --load
litex_server --uart --uart-port /dev/ttyUSB1
litex_cli --regs
2023-08-04 20:47:32 +02:00
efc15a91a9
global: Use new WaitTimer integrated cast to int.
2023-08-01 14:56:35 +02:00
f780b5faed
Merge pull request #513 from josuah/master
...
lattice_ecp5_evn: add_jtagbone flag
2023-08-01 11:38:23 +02:00
538399cb3b
lattice_ecp5_evn: update OpenOCD syntax
...
When running `litex_server`, this error appeared:
can't read "_CHIPNAME": no such variable
This is a fix for the specific lattice_ecp5_evn board.
It also refreshes the OpenOCD syntax.
2023-07-31 14:05:34 +02:00
cbcf6df26f
lattice_ecp5_evn: add_jtagbone flag
...
This follows https://github.com/enjoy-digital/litex/pull/1087 which
allows using the built-in JTAG for both the FPGA programming and the
internal core of the FPGA.
2023-07-31 13:53:24 +02:00
2d3b81a532
efinix_trion_t120_bga576: Add Ethernet through RGMII PMOD and switch to it.
...
See https://github.com/enjoy-digital/liteeth/issues/66#issuecomment-859366899 for the PMOD.
2023-07-27 11:52:40 +02:00
c1088befe5
targets/CRG: Add rst signal when missing.
...
Allow properly reseting the PLL from the SoC.
2023-07-26 16:56:27 +02:00
ace789653f
platforms/ti60_f225: Add connector numbering to ease review/schematic comparison.
2023-07-21 09:08:22 +02:00
ce121663ff
targets/uartbone: Update with LiteX change.
2023-07-20 15:42:47 +02:00
72a951081a
xu8_pe3: Fix clk_p/n on pcie_x8.
2023-07-13 18:10:46 +02:00
18a3909a9c
global: Switch to litex.gen.genlib.misc.
2023-07-06 22:11:45 +02:00
67be3ab677
targets: +x on alchitry_cu and vcu128.
2023-07-06 13:29:35 +02:00
34a1ced135
Merge pull request #510 from Mark1626/master
...
alchitry_cu: add platform and target
2023-07-06 09:08:24 +02:00
e9335cd67a
Fix pins in Alchitry Cu platform, add target for Alchitry Cu
2023-06-27 21:35:55 +05:30
061a768495
Add Alchitry Cu board
2023-06-16 21:36:57 +05:30
c49a50a934
platform/gsd_butterstick: Add mssing USB comment.
2023-06-16 09:10:47 +02:00
28ecb1e9f3
enclustra_mercury_xu8_pe3: Fix pcie_x8 and add GTH banks for pcie_x4/x8.
2023-06-15 17:57:38 +02:00
06e8829eb4
platforms/gsd_butterstick: Add default programmer to avoid breaking older designs.
2023-06-14 16:40:35 +02:00
58805f037c
avnet_aesku40: Expose ethernet/etherbone parameters.
...
To be able to test more easily usrgmii build.
2023-06-13 09:26:07 +02:00
e4343dcb86
Merge pull request #509 from iostat/patch-1
...
Support SPI Flash in Colorlight 5A-75x
2023-06-12 08:55:38 +02:00
4705a0274e
Support SPI Flash in Colorlight 5A-75x
2023-06-09 13:43:34 -04:00
96175a9986
sitlinv_stlv7325_v2: Add default value to vccio.
2023-06-07 15:00:49 +02:00
d874d344d2
Merge pull request #507 from hansfbaier/master
...
sitlinv_stlv7325_v2: VCCIO jumper default factory setting is 3.3V
2023-06-07 14:08:14 +02:00
Florent Kermarrec
Josuah Demangeon
Bayi
Mark1626
Ilya Ostrovskiy