1e0e96f9a0
interconnect/axi: add AXI Stream definition and get_ios/connect_to_pads methods.
2020-02-28 16:25:09 +01:00
6be7e9c33d
interconnect/axi: set default data_width/address_width to 32-bit.
2020-02-28 13:20:01 +01:00
8e1d528663
targets: default to trellis toolchain on all ECP5 targets (now able to build all supported targets).
2020-02-28 09:48:48 +01:00
a7c5dd5d3e
cores/gpio: use separate TSTriple for each bit.
...
This fixes per bit OE control.
2020-02-28 09:10:28 +01:00
400492e234
lattice/yosys: don't use quiet operation since logs are useful and for consistency with others build backends.
2020-02-28 08:32:29 +01:00
c4fd6a7f2f
targets/kc705: use DDRPHY_CMD_DELAY to center write leveling.
2020-02-27 13:00:35 +01:00
78a3223573
software/bios/sdram: allow setting CLK/CMD delay from user design and configure it before write/read leveling.
...
Setting a manual delay on CLK/CMD vs DQ/DQS is required on some configuration to center the write leveling window:
Before (delay = 0 taps):
Write leveling:
m0: |11000000000000011111111111| delay: 15
m1: |00000000000000111111111111| delay: 14
m2: |11110000000000000111111111| delay: 17
m3: |11110000000000000011111111| delay: 18
m4: |11111111110000000000000111| delay: 00
m5: |11111111110000000000000111| delay: 00
m6: |11111111111000000000000001| delay: 00
m7: |11111111111000000000000011| delay: 00
After (delay = 12 taps):
Write leveling:
m0: |11111111111111000000000000| delay: 00
m1: |11111111111100000000000001| delay: 00
m2: |00011111111111110000000000| delay: 03
m3: |00011111111111110000000000| delay: 03
m4: |00000000111111111111110000| delay: 08
m5: |00000000111111111111110000| delay: 08
m6: |00000000001111111111111000| delay: 10
m7: |00000000001111111111111000| delay: 10
2020-02-27 12:26:27 +01:00
eab5161d47
boards: keep in sync with LiteX-boards
2020-02-27 11:18:14 +01:00
935e4effd2
interconnect/axi: remove mode on AXIInterface (not used and breaking LiteDRAM tests)
2020-02-26 15:13:29 +01:00
d324c54eee
integration/soc: -x on soc.py
2020-02-26 14:43:01 +01:00
ee27a9e534
soc/cores/bitbang: fix missing self.comb on miso.
2020-02-25 15:57:14 +01:00
a2d6986910
Merge pull request #402 from antmicro/litex-gen-fix-uart-pins
...
tools: litex_gen: fix missing UART pins
2020-02-25 15:53:13 +01:00
e2aebb427e
software: disable LTO with LM32 (not supported by old GCC versions easily available).
2020-02-25 15:32:36 +01:00
9e70fcf8ba
Merge pull request #401 from antmicro/enable-lto
...
software: enable link time optimization (LTO)
2020-02-25 15:32:12 +01:00
75b000a32f
tools: litex_gen: fix missing UART pins
2020-02-25 14:24:29 +01:00
718a65c3c9
software: enable link time optimization (LTO)
...
Co-authored-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
2020-02-24 16:12:21 +01:00
9521f2ff80
Merge pull request #400 from Xiretza/ecp5-pll-freqfix
...
Fix ECP5PLL VCO frequency range
2020-02-24 14:49:35 +01:00
7a87d4e262
Fix ECP5PLL VCO frequency range
...
See https://www.latticesemi.com/view_document?document_id=50461 ("ECP5
and ECP5-5G Family Data Sheet"), section 3.19 "sysCLOCK PLL Timing".
2020-02-24 14:39:59 +01:00
0c7e0bf025
integration/soc: improve presentation of SoCLocHandler's locations.
2020-02-24 13:37:38 +01:00
0042a02807
interconnect/axi: remove bus_name on connect_to_pads
2020-02-24 13:24:32 +01:00
5aba1fe824
tools/litex_gen: add bus parameter and AXI (Lite) support.
2020-02-24 12:49:42 +01:00
a3584147a5
litex_gen/axi: simplify the way the bus is exposed as ios and connected to pads.
2020-02-24 12:48:52 +01:00
d86db6f12b
litex_gen/wishbone: simplify the way the bus is exposed as ios and connected to pads.
2020-02-24 12:48:20 +01:00
18c57a64a3
tools: rename litex_extract to litex_gen (use similar name than litedram/liteeth generators) and cleanup/simplify.
2020-02-24 10:25:18 +01:00
0083e0978b
Merge pull request #396 from antmicro/external-wb
...
Add a script that allows to generate standalone cores
2020-02-24 10:01:16 +01:00
017c91a4be
Merge pull request #397 from gsomlo/gls-csr-volatile
...
Add 'volatile' qualifier to new CSR accessors
2020-02-21 21:08:22 +01:00
173117ad4b
Add 'volatile' qualifier to new CSR accessors
...
Through their use of the MMPTR() macro, the "classic"
csr_[read|write]simple() accsessors identify the MMIO
subregister with the 'volatile' qualifier.
Adjust the new, csr_[rd|wr]_uint[8|16|32|64]() accessors
to also utilize the 'volatile' qualifier. Since accesses
are implicit (a[i], where a is an 'unsigned long *'),
change 'a' to be a 'volatile unsigned long *' instead.
No difference was noticed in opcodes generated using the
gcc9 risc-v cross-compiler on x86_64 with standard LiteX
cflags (vexriscv and rocket were tested), but since
reports exist that 'volatile' matters on some combinations
of compilers and targets, add the 'volatile' qualifier just
to be on the safe side.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com
2020-02-21 14:10:13 -05:00
9e2aede8a8
tools: add script for extracting wishbone cores
2020-02-21 16:33:26 +01:00
79a14001b0
axi: add to_pads method
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2020-02-21 12:22:18 +01:00
e0bcb57d3d
wishbone: add extracting module signals to the top
2020-02-21 11:20:32 +01:00
485934edc9
doc/socdoc: fix example
2020-02-20 19:47:15 +01:00
53ee9a5e05
cpu/blackparrot: first cleanup pass
2020-02-20 18:50:13 +01:00
f3829cf081
integration/soc: set base_address on LiteDRAMWishbone2Native, fix addressing with >= 1GB SDRAMs.
2020-02-20 16:16:36 +01:00
3a6f97fff3
build/sim: add Verilator FST tracing support.
2020-02-20 13:53:31 +01:00
8a715f3b12
Merge pull request #390 from gsomlo/gls-add-sdcard
...
Import LiteSDCard support in to LiteX, using nexys4ddr as the initial test target
2020-02-20 08:17:54 +01:00
516cf40506
targets/nexys4ddr: add optional sdcard support
...
Add the option to select LiteSDCard support in BaseSoC, via the
'--with-sdcard' command line argument.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-02-19 20:16:13 -05:00
d4d2b7f7c6
bios: add litesdcard test routines to boot menu
...
This is a straightforward import of the sdcard initialization and
testing routines from the LiteSDCard demo example, made available
as mainline LiteX bios boot-prompt commands.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-02-19 20:16:13 -05:00
7a2e33b817
targets/nexys4ddr: add ethernet via method instead of inheritance
...
Switch adding LiteETH support to BaseSoc via a method instead of
inheritance. This allows further optional peripherals to be added
in the future, via additional methods.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-02-19 20:16:13 -05:00
774a55a2aa
soc_core: fix missing init on main_ram
2020-02-19 14:59:58 +01:00
5d580ca4e1
Merge pull request #389 from antmicro/linux_flash_offsets
...
bios/boot: allow to customize flash offsets of Linux images
2020-02-18 17:54:13 +01:00
00895518e5
cores/cpu: use standard+debug variant when only debug is specified.
2020-02-18 16:59:55 +01:00
659c244a0b
bios/boot: allow to customize flash offsets of Linux images
2020-02-18 13:38:09 +01:00
ae45be4773
soc/cores/clock: add reset_cycles parameter to S7IDELAYCTRL/USIDELAYCTRL
2020-02-18 10:15:01 +01:00
9baa3ad5bb
soc/csr_bus: fix aligned_paging computation (should be done with SoC's Bus data width not bus.alignment)
2020-02-18 09:13:32 +01:00
854e7cc908
integration/soc: improve Region logger
2020-02-18 08:27:59 +01:00
9cb8f68e82
bios/boot: update and fix flashboot, improve verbosity
2020-02-17 19:21:54 +01:00
6ed0f445b6
soc: increase supporteds address_width/paging
2020-02-17 08:36:40 +01:00
5b3808cb81
soc_core: expose CSR paging
2020-02-17 08:34:10 +01:00
0497f3ca71
soc/csr_bus: improve CSR paging genericity
2020-02-17 08:28:56 +01:00
351896bf57
tools/litex_sim: use new sdram verbosity parameter
2020-02-16 16:09:06 +01:00
Florent Kermarrec
Jan Kowalewski
Tim 'mithro' Ansell
Xiretza
Gabriel Somlo
Piotr Binkowski
Karol Gugala
Mateusz Holenko