Hardware
/
litex-boards
mirror of https://github.com/litex-hub/litex-boards.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
1,917 Commits 9 Branches 14 Tags 11 MiB
Commit Graph

1122 Commits

Author SHA1 Message Date
Florent Kermarrec 3df677cfeb Add initial Analog Pocket platform/target with Clk/SDRAM, able to run a simple SoC with SDRAM over JTAG-UART. 
$ ./analog_pocket.py --uart-name=jtag_uart --build --load
$ litex_term jtag --jtag-config=openocd_usb_blaster.cfg

        __   _ __      _  __
       / /  (_) /____ | |/_/
      / /__/ / __/ -_)>  <
     /____/_/\__/\__/_/|_|
   Build your hardware, easily!

 (c) Copyright 2012-2023 Enjoy-Digital
 (c) Copyright 2007-2015 M-Labs

 BIOS built on Sep 21 2023 08:53:57
 BIOS CRC passed (1e2b3f44)

 LiteX git sha1: 7d738737

--=============== SoC ==================--
CPU:		VexRiscv @ 50MHz
BUS:		WISHBONE 32-bit @ 4GiB
CSR:		32-bit data
ROM:		128.0KiB
SRAM:		8.0KiB
L2:		8.0KiB
SDRAM:		64.0MiB 16-bit @ 50MT/s (CL-2 CWL-2)
MAIN-RAM:	64.0MiB

--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
  Write: 0x40000000-0x40200000 2.0MiB
   Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
  Write speed: 15.6MiB/s
   Read speed: 22.1MiB/s

--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found

--============= Console ================--

litex>
 2023-09-21 09:19:57 +02:00
Florent Kermarrec 5064c65dac targets: Switch to openocd_usb_blaster/2.cfg. 2023-09-21 09:16:24 +02:00
Florent Kermarrec b92c96b3a4 colorlight_i9plus: Cosmetic cleanups. 2023-08-30 17:22:11 +02:00
enjoy-digital 3471617878
Merge pull request #502 from chmousset/add_colorlight_i9plus 
[init] added colorlight i9+ based on XC7A50 FPGA
 2023-08-30 16:54:26 +02:00
Florent Kermarrec c960e85d11 targets/efinix: Now rely in LiteX to automatically exclude Tristate IOs. 2023-08-30 09:59:23 +02:00
Florent Kermarrec 4bb064853d targets/efinix: Update RGMII PHYs (IOs are now directly excluded in PHYs). 2023-08-30 08:56:20 +02:00
Florent Kermarrec 347b477b07 sipeed_tang_primer_20k: Fix DDR3 module, SoC reset and remove DDR3 debug code. 
Now passing memtest with valid reported memory size:

       __   _ __      _  __
       / /  (_) /____ | |/_/
      / /__/ / __/ -_)>  <
     /____/_/\__/\__/_/|_|
   Build your hardware, easily!

 (c) Copyright 2012-2023 Enjoy-Digital
 (c) Copyright 2007-2015 M-Labs

 BIOS CRC passed (d32a9529)

 LiteX git sha1: 85dadb82

--=============== SoC ==================--
CPU:		VexRiscv SMP-LINUX @ 48MHz
BUS:		WISHBONE 32-bit @ 4GiB
CSR:		32-bit data
ROM:		64.0KiB
SRAM:		6.0KiB
L2:		512B
SDRAM:		128.0MiB 16-bit @ 192MT/s (CL-6 CWL-5)
MAIN-RAM:	128.0MiB

--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
  m0, b00: |00000000| delays: -
  m0, b01: |00000000| delays: -
  m0, b02: |01100000| delays: 01+-00
  m0, b03: |00000000| delays: -
  best: m0, b02 delays: 01+-00
  m1, b00: |00000000| delays: -
  m1, b01: |00000000| delays: -
  m1, b02: |01100000| delays: 01+-00
  m1, b03: |00000000| delays: -
  best: m1, b02 delays: 01+-00
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
  Write: 0x40000000-0x40200000 2.0MiB
   Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
  Write speed: 11.7MiB/s
   Read speed: 17.4MiB/s
 2023-08-29 16:50:17 +02:00
enjoy-digital 4862d0667c
Merge pull request #515 from josuah/crosslink_nx_openocd 
Allow use of OpenOCD for the Crosslink-NX
 2023-08-28 16:35:20 +02:00
enjoy-digital 232e829b8f
Merge branch 'master' into crosslink_nx_main_ram 2023-08-28 16:34:27 +02:00
enjoy-digital a9ecbffe8f
Merge pull request #520 from josuah/crosslink_nx_prog_flash 
targets/lattice_crosslink_nx_evn: fix arguments in flash programming
 2023-08-28 16:33:23 +02:00
enjoy-digital 2c3d77b5be
Merge branch 'master' into crosslink_nx_spi_flash 2023-08-28 16:32:37 +02:00
Josuah Demangeon a5a6a313cc targets/lattice_crosslink_nx_evn: add main_ram section for firmware 
This takes the values from the Antmicro SDI MIPI converter as a model
and is enough to run a Zephyr hello world, but not seemingly enough for
a the Zephyr Shell sample.

Related: https://github.com/litex-hub/zephyr-on-litex-vexriscv/pull/13
 2023-08-18 19:56:58 +02:00
Josuah Demangeon 2e5c6eb7a7 platforms/crosslink_nx_evn: add SPI flash support 2023-08-11 16:46:52 +02:00
Josuah Demangeon 1a46bcce5e targets/lattice_crosslink_nx_evn: fix arguments in flash programming 2023-08-10 14:39:01 +02:00
Josuah Demangeon 3c0b6956cc platforms/crosslink_nx_evn: Fix 5412d0e always disabling uartbone 
Also fix a warning about register_mem being deprecated, taking
inspiration from platforms/crosslink_nx_vip
 2023-08-09 18:07:13 +02:00
Josuah Demangeon 8172a304b3 platforms/crosslink_nx_evn: allow use of OpenOCD 2023-08-08 23:25:41 +02:00
enjoy-digital 3903cdee92
Merge pull request #517 from bayi/master 
Digilent CMOD A7 ISSIRAM fix
 2023-08-08 19:29:32 +02:00
Bayi 4362cb23a1
Fix Digilent Cmod A7 ISSIRAM reading 2023-08-05 19:56:32 +02:00
Bayi a6b025f7f3
Fix Digilent Cmod A7 ISSIRAM reading 2023-08-05 19:56:15 +02:00
Josuah Demangeon 5412d0e0e9 platforms/crosslink_nx_evn: allow use of UARTBone 
This goes along a small resistor jumper modification and firmware flashing like
it is for the ECP5 board. A warning message is added as the default serial might
be affected (--serial serial by default). The FTDI modification software used
for the ECP5 seems to be requried and matching.

This can be tested this way:
targets/lattice_crosslink_nx_evn.py --csr-csv=csr.csv --toolchain=oxide --programmer=openocd --uart-name crossover+uartbone --build --load
litex_server --uart --uart-port /dev/ttyUSB1
litex_cli --regs
 2023-08-04 20:47:32 +02:00
Florent Kermarrec efc15a91a9 global: Use new WaitTimer integrated cast to int. 2023-08-01 14:56:35 +02:00
Josuah Demangeon cbcf6df26f lattice_ecp5_evn: add_jtagbone flag 
This follows https://github.com/enjoy-digital/litex/pull/1087 which
allows using the built-in JTAG for both the FPGA programming and the
internal core of the FPGA.
 2023-07-31 13:53:24 +02:00
Florent Kermarrec 2d3b81a532 efinix_trion_t120_bga576: Add Ethernet through RGMII PMOD and switch to it. 
See https://github.com/enjoy-digital/liteeth/issues/66#issuecomment-859366899 for the PMOD.
 2023-07-27 11:52:40 +02:00
Florent Kermarrec c1088befe5 targets/CRG: Add rst signal when missing. 
Allow properly reseting the PLL from the SoC.
 2023-07-26 16:56:27 +02:00
Florent Kermarrec ce121663ff targets/uartbone: Update with LiteX change. 2023-07-20 15:42:47 +02:00
Florent Kermarrec 18a3909a9c global: Switch to litex.gen.genlib.misc. 2023-07-06 22:11:45 +02:00
Florent Kermarrec 67be3ab677 targets: +x on alchitry_cu and vcu128. 2023-07-06 13:29:35 +02:00
Mark1626 e9335cd67a
Fix pins in Alchitry Cu platform, add target for Alchitry Cu 2023-06-27 21:35:55 +05:30
Florent Kermarrec 58805f037c avnet_aesku40: Expose ethernet/etherbone parameters. 
To be able to test more easily usrgmii build.
 2023-06-13 09:26:07 +02:00
Ilya Ostrovskiy 4705a0274e
Support SPI Flash in Colorlight 5A-75x 2023-06-09 13:43:34 -04:00
Hans Baier 765ee1a3ce sitlinv_stlv7325_v2: VCCIO jumper default factory setting is 3.3V 2023-06-07 10:12:55 +07:00
Florent Kermarrec 8a263c18f2 sitlinv_stlv7325: Rename to v1 and update VCCIO to fix --with-pcie generation. 2023-05-30 10:39:20 +02:00
Chen 2ae2dfa6a3
Add vcu128 target (#497) 
Add initial VCU128 support.
 2023-05-25 22:25:44 +02:00
Florent Kermarrec e59d75f593 qmtech_xc7k325t: Fix build/CI. 2023-05-12 12:19:16 +02:00
Florent Kermarrec ca6b607255 targets/qmtech: Add missing +x. 2023-05-12 12:09:20 +02:00
Hans Baier 550bc0eee5 add QMTech XC7K325T board, add seven segment display to daughterboard 2023-05-08 11:51:51 +07:00
Hans Baier 187080228c add qmtech_xc7l325t 2023-05-08 05:17:35 +07:00
Florent Kermarrec d33cf1a74c mnt_rkx7: Cosmetic cleanups. 2023-05-05 09:48:06 +02:00
Florent Kermarrec c05c494a82 targets/mnt_rkx7/usb_ohci: Use SoC.bus if SoC does not have a DMA bus. 2023-05-05 09:43:19 +02:00
enjoy-digital 6144966d24
Merge pull request #501 from mntmn/master 
mnt_rkx7: RGB and USB fix, add HDMI terminal
 2023-05-05 09:37:40 +02:00
enjoy-digital 9c222454cc
Merge pull request #503 from chmousset/add_colorlight_i5a-907 
Add colorlight i5a 907
 2023-05-03 09:50:26 +02:00
Gabriel Somlo 2bff2d4260 target/stlv7325-v2: tune eth phy delay 2023-05-01 09:28:03 -04:00
Charles-Henri Mousset 31c680abf8
[enh] added option for uartbone 2023-04-30 09:42:31 +02:00
Charles-Henri Mousset 874532871f
[enh] taking advantage of pins directly connected 2023-04-30 09:24:49 +02:00
Charles-Henri Mousset 1202c387bf
[init] added colorlight i5a-907 support 2023-04-30 09:24:46 +02:00
Charles-Henri Mousset fd5511f3fd
[fix] add pmod uart in default config 2023-04-30 09:24:15 +02:00
Charles-Henri Mousset f5dfdf9abf
[enh] added doc about JTAG and ext. board 2023-04-29 19:39:51 +02:00
Charles-Henri Mousset 322cc5d45b
[init] added colorlight i9+ based on XC7A50 FPGA 2023-04-29 18:36:35 +02:00
Gabriel Somlo 1f6e7f36a5 target/stlv7325-v2: fix typo in eth phy delay 2023-04-28 16:56:37 -04:00
Gabriel Somlo 1185ff51f1 Initial support for STLV7325 (v2) Kintex-7 board. 
This is the 2nd (2023) version of the board sold through
https://www.aliexpress.us/item/3256801088848039.html

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
 2023-04-28 10:24:21 -04:00