2023-06-06 05:09:44 -04:00
|
|
|
|
[> Changes since 2023.04
|
|
|
|
|
|
------------------------
|
|
|
|
|
|
|
|
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
|
|
|
|
|
- lattice/programmer : Fixed ECPDAP frequency specification.
|
|
|
|
|
|
- soc/add_spi_sdcard : Fixed Tristate build.
|
|
|
|
|
|
- csr/fields : Fixed access type checks.
|
|
|
|
|
|
- software/liblitespi : Fixed support with debug.
|
2023-06-16 02:33:23 -04:00
|
|
|
|
- cpu/vexriscv_smp : Fixed compilation with Gowin toolchain (ex for Tang Nano 20K Linux).
|
2023-06-21 06:46:16 -04:00
|
|
|
|
- liteiclink/serwb : Fixed 7-Series initialization corner cases.
|
2023-07-10 05:23:10 -04:00
|
|
|
|
- liteeth/core/icmp : Fixed length check on LiteEthICMPEcho before passing data to buffer.
|
2023-07-14 04:01:32 -04:00
|
|
|
|
- LiteXModule/CSR : Fixed CSR collection order causing CSR clock domain to be changed.
|
2023-07-21 08:50:38 -04:00
|
|
|
|
- litepcie/US(P) : Fixed root cause of possible MSI deadlock.
|
2023-07-26 06:26:16 -04:00
|
|
|
|
- soc/add_uart : Fixed stub behavior (sink/source swap).
|
2023-07-27 07:58:45 -04:00
|
|
|
|
- build/efinix : Fixed AsyncFIFO issues (Minimum of 2 buffer stages).
|
2023-07-31 12:00:43 -04:00
|
|
|
|
- software/gcc : Fixed Ubuntu 22.04 GCC compilation issues.
|
2023-08-28 10:04:43 -04:00
|
|
|
|
- build/efinix : Fixed hardcoded version.
|
2023-08-29 11:15:45 -04:00
|
|
|
|
- litedram/gw2ddrphy : Fixed latencies and tested on Tang Primer 20K.
|
2023-06-06 05:09:44 -04:00
|
|
|
|
|
|
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
|
|
|
|
|
- soc/cores/video : Added low resolution video modes.
|
|
|
|
|
|
- interconnect : Added initial AvalonMM support.
|
|
|
|
|
|
- soc/interconnect/packet : Avoided bypass of dispatcher with a single slave.
|
|
|
|
|
|
- build/add_period_constraints : Improved generic platform and simplify specific platforms.
|
|
|
|
|
|
- gen/fhdl/verilog : Added parameter to avoid register initialization (required for ASIC).
|
|
|
|
|
|
- litedram : Added clamshell topology support.
|
|
|
|
|
|
- stream/Pipeline : Added dynamic pipeline creation capability.
|
|
|
|
|
|
- build/xilinx/vivado : Added project commands to allow adding commands just after project creation.
|
|
|
|
|
|
- soc/software : Moved helpers to hw/common.h.
|
|
|
|
|
|
- tools/litex_json2dts_linux : Added sys_clk to device tree and fixed dts warning.
|
|
|
|
|
|
- tools/litex_json2dts_zephyr : Added LiteSD defines.
|
|
|
|
|
|
- build/yosys : Added quiet capability.
|
|
|
|
|
|
- build/efinix : Improved Titanium support (PLL, DRIVE_STRENGTH, SLEW).
|
|
|
|
|
|
- build/openfpgaloader : Added -fpga-part and -index-chain support.
|
|
|
|
|
|
- soc/add_spi_flash : Added software_debug support.
|
|
|
|
|
|
- software/liblitespi : Added read_id support.
|
|
|
|
|
|
- litex_boards : Added QMtech XC7K325T, VCU128, SITLINV_STVL7325_V2, Enclustra XU8/PE3 support.
|
2023-06-13 12:37:34 -04:00
|
|
|
|
- liteeth : Added Ultrascale+ GTY/GTH SGMII/1000BaseX PHYs.
|
2023-06-19 03:44:37 -04:00
|
|
|
|
- soc/add_pcie : Added msi_type parameter to select MSI, MSI-Multi-Vector or MSI-X.
|
2023-06-19 03:54:10 -04:00
|
|
|
|
- soc/add_pcie : Added msi_width parameter to select MSI width.
|
2023-06-19 13:21:05 -04:00
|
|
|
|
- litepcie : Added 7-Series MSI-X capability/integration.
|
2023-06-21 06:46:16 -04:00
|
|
|
|
- liteiclink : Improved GTH3/GTH4 support and similarity with Wizard's generated code.
|
2023-06-22 11:40:41 -04:00
|
|
|
|
- liteeth_gen : Added SGMII/1000BaseX PHYs support.
|
2023-07-03 04:56:29 -04:00
|
|
|
|
- litesata/dma : Added multi-sector support.
|
|
|
|
|
|
- liteeth/mac : Added TX Slots write-only mode for improved resource usage when software does not read buffer.
|
2023-07-03 12:09:56 -04:00
|
|
|
|
- liteeth/core : Added DHCP support for CPU-less hardware stack.
|
2023-07-10 05:23:10 -04:00
|
|
|
|
- liteeth/core/icmp : Added fifo_depth parameter on LiteEthICMPEcho.
|
|
|
|
|
|
- gen/fhdl/verilog : Improved signal sort by name instead of duid to improve reproducibility.
|
2023-07-11 10:42:21 -04:00
|
|
|
|
- litedram/frontend/dma : Added last generation on end of DMA for LiteDRAMDMAReader.
|
2023-07-20 04:35:10 -04:00
|
|
|
|
- litepcie/frontend/dma : Added optional integrated data-width converter and data_width parameters to simplify integration/user logic.
|
2023-07-20 10:30:48 -04:00
|
|
|
|
- soc/add_uartbone/sata/sdcard : Added support for multiple instances in gateware as for the other cores.
|
2023-07-21 09:16:42 -04:00
|
|
|
|
- liteeth_gen : Added raw UDP port support.
|
2023-07-21 13:53:10 -04:00
|
|
|
|
- build/vivado : Added .dcp generation also after synthesis and placement.
|
2023-07-27 07:58:45 -04:00
|
|
|
|
- gen: : Added initial LiteXContext to easily get build properties (platform, device, toolchain, etc...)
|
2023-07-30 09:12:01 -04:00
|
|
|
|
- litepcie/endpoint/tlp : Added optional Configuration/PTM TLP support to Packetizer/Depacketizer.
|
2023-07-31 12:00:43 -04:00
|
|
|
|
- liteth/arp : Added proper multi-entries ARP table.
|
2023-08-04 10:08:00 -04:00
|
|
|
|
- liteiclink/serdes : Added tx/rx_clk sharing capabilities on Xilinx transceivers.
|
cores/spi: Add new SPIMMAP core allowing doing SPI accesses directly from MMAP.
Implements a new SPIMMAP module, allowing accessing multiple SPI peripherals directly
from MMAP. It allows configurable SPI transactions: mode, bit order, and data width.
Developed and funded through a collaboration with MoTeC.
Example of integration:
# SPI MMAP ---------------------------------------------------------------------------------
spi_pads = Record([("clk", 1), ("cs_n", 8), ("mosi", 1), ("miso", 1)])
spi_mmap_tx_region = SoCRegion(origin=0x8000_0000, size=4096, cached=False)
spi_mmap_rx_region = SoCRegion(origin=0x8000_1000, size=4096, cached=False)
self.spi_mmap = SPIMMAP(
pads = spi_pads,
data_width = 32,
sys_clk_freq = sys_clk_freq,
tx_origin = spi_mmap_tx_region.origin,
rx_origin = spi_mmap_rx_region.origin,
tx_fifo_depth = 32,
rx_fifo_depth = 32,
)
self.bus.add_slave(name="spi_tx",
slave = self.spi_mmap.tx_mmap.bus,
region = spi_mmap_tx_region,
)
self.bus.add_slave(name="spi_rx",
slave = self.spi_mmap.rx_mmap.bus,
region = spi_mmap_rx_region,
)
self.irq.add("spi_mmap", use_loc_if_exists=True)
Example of use from CPU C firmware:
/* SPI TX Offsets */
#define SPI_TX_CTRL_ENABLE (1 << 0)
#define SPI_TX_CTRL_THRESHOLD (1 << 16)
#define SPI_TX_STAT_ONGOING (1 << 0)
#define SPI_TX_STAT_EMPTY (1 << 1)
#define SPI_TX_STAT_FULL (1 << 2)
#define SPI_TX_STAT_LEVEL (1 << 16)
/* SPI RX Offsets */
#define SPI_RX_CTRL_ENABLE (1 << 0)
#define SPI_RX_CTRL_THRESHOLD (1 << 16)
#define SPI_RX_STAT_ONGOING (1 << 0)
#define SPI_RX_STAT_EMPTY (1 << 1)
#define SPI_RX_STAT_FULL (1 << 2)
#define SPI_RX_STAT_LEVEL (1 << 16)
/* SPI TX/RX Engine */
#define SPI_TX_RX_ENGINE_ENABLE (1 << 0)
/* SPI SLOT Offsets */
#define SPI_SLOT_ENABLE (1 << 0)
#define SPI_SLOT_MODE (1 << 1)
#define SPI_SLOT_LENGTH (1 << 3)
#define SPI_SLOT_BITORDER (1 << 5)
#define SPI_SLOT_LOOPBACK (1 << 6)
#define SPI_SLOT_DIVIDER (1 << 16)
/* SPI SLOT Values */
#define SPI_SLOT_MODE_0 0b00
#define SPI_SLOT_MODE_3 0b11
#define SPI_SLOT_LENGTH_32B 0b00
#define SPI_SLOT_LENGTH_16B 0b01
#define SPI_SLOT_LENGTH_8B 0b10
#define SPI_SLOT_BITORDER_MSB_FIRST 0b0
#define SPI_SLOT_BITORDER_LSB_FIRST 0b1
#define SPI_SLOT_EV_TX (1 << 0)
#define SPI_SLOT_EV_RX (1 << 1)
/* Test SPI with various length (BE) */
void test_spi_length_8_16_32(void) {
volatile unsigned char *spi_tx_8 = (unsigned char *)SPI_TX_BASE;
volatile unsigned short *spi_tx_16 = (unsigned short *)SPI_TX_BASE;
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned char *spi_rx_8 = (unsigned char *)SPI_RX_BASE;
volatile unsigned short *spi_rx_16 = (unsigned short *)SPI_RX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various length (BE): 8, 16 and 32-bit...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control2_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control3_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 8-bit transfers */
spi_tx_8[0] = 0x5a;
spi_tx_8[4] = 0x01;
spi_tx_8[8] = 0x5a;
spi_tx_8[12] = 0x01;
/* TX 16-bit transfers */
spi_tx_16[0] = 0x5aa5;
spi_tx_16[2] = 0x0102;
spi_tx_16[4] = 0x5aa5;
spi_tx_16[6] = 0x0102;
/* TX 32-bit transfers */
spi_tx_32[0] = 0x5aa55aa5;
spi_tx_32[1] = 0x01020304;
spi_tx_32[2] = 0x5aa55aa5;
spi_tx_32[3] = 0x01020304;
/* Small delay */
busy_wait(1);
/* Read RX 8-bit transfers */
if (spi_rx_8[ 0] != 0x5a)
errors++;
if (spi_rx_8[ 4] != 0x01)
errors++;
if (spi_rx_8[ 8] != 0x5a)
errors++;
if (spi_rx_8[12] != 0x01)
errors++;
/* Read RX 16-bit transfers */
if (spi_rx_16[0] != 0x5aa5)
errors++;
if (spi_rx_16[2] != 0x0102)
errors++;
if (spi_rx_16[4] != 0x5aa5)
errors++;
if (spi_rx_16[6] != 0x0102)
errors++;
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x5aa55aa5)
errors++;
if (spi_rx_32[1] != 0x01020304)
errors++;
if (spi_rx_32[2] != 0x5aa55aa5)
errors++;
if (spi_rx_32[3] != 0x01020304)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI with various clk divider */
void test_spi_clk_divider(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various clk divider: 4, 8, 16 and 32...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
8 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control2_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
16 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control3_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
32 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x01020304;
spi_tx_32[1] = 0x5aa55aa5;
spi_tx_32[2] = 0x01020304;
spi_tx_32[3] = 0x5aa55aa5;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x01020304)
errors++;
if (spi_rx_32[1] != 0x5aa55aa5)
errors++;
if (spi_rx_32[2] != 0x01020304)
errors++;
if (spi_rx_32[3] != 0x5aa55aa5)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI with various SPI modes */
void test_spi_modes(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various SPI modes: 0 and 3...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_3 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x5aa55aa5;
spi_tx_32[1] = 0x5aa55aa5;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x5aa55aa5)
errors++;
if (spi_rx_32[1] != 0x5aa55aa5)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI with various bitorders */
void test_spi_bitorders(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various bitorders: MSB and LSB first...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_LSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0xff000000;
spi_tx_32[1] = 0xff000000;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0xff000000)
errors++;
if (spi_rx_32[1] != 0xff000000)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI TX/RX levels */
void test_spi_tx_rx_levels(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int i;
int errors = 0;
int pattern;
printf("Test SPI TX/RX levels...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
128 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
pattern = 0x00000001;
for (i=0; i<16; i++){
if ((spi_mmap_ctrl_tx_status_read() >> 16) != i)
errors++;
spi_tx_32[0] = pattern;
}
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
for (i=0; i<16; i++){
pattern = spi_rx_32[0];
if ((spi_mmap_ctrl_rx_status_read() >> 16) != (16-1-i))
errors++;
}
if ((spi_mmap_ctrl_tx_status_read() >> 16) != 0)
errors++;
if ((spi_mmap_ctrl_rx_status_read() >> 16) != 0)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI TX/RX IRQs */
void test_spi_tx_rx_irqs(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
int data __attribute__((unused));
printf("Test SPI TX/RX IRQs...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
128 * SPI_SLOT_DIVIDER
);
/* Enable TX/RX EventManager */
spi_mmap_ev_enable_write(0);
spi_mmap_ev_pending_write(spi_mmap_ev_pending_read());
spi_mmap_ev_enable_write(SPI_SLOT_EV_TX | SPI_SLOT_EV_RX);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x00000001;
/* Small delay */
busy_wait(1);
/* Verify TX/RX events */
if (spi_mmap_ev_pending_read() != (SPI_SLOT_EV_TX | SPI_SLOT_EV_RX))
errors++;
/* Read RX 32-bit tranfers */
data = spi_rx_32[0];
/* Clear events */
spi_mmap_ev_pending_write(spi_mmap_ev_pending_read());
/* Verify TX/RX events */
if (spi_mmap_ev_pending_read() != 0)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI Back-to-Back */
void test_spi_back_to_back(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI Back-to-Back...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
8 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x00000001;
spi_tx_32[0] = 0x00000002;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x00000001)
errors++;
if (spi_rx_32[0] != 0x00000002)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
2023-08-04 11:24:51 -04:00
|
|
|
|
- soc/cores/spi : Added new SPIMMAP core allowing SPI accesses through MMAP.
|
2023-08-28 10:04:43 -04:00
|
|
|
|
- soc/interconnect/stream : Added pipe_valid/pipe_ready parameters to BufferizeEndpoints.
|
2023-08-29 11:15:45 -04:00
|
|
|
|
- soc/cores/clock : Added initial GW5A support.
|
2023-08-30 12:11:11 -04:00
|
|
|
|
- build/efinix : Added initial EfinixDDROutput/Input and simplified IOs exclusion.
|
2023-09-01 06:40:03 -04:00
|
|
|
|
- soc/interconnect : Improved DMA Bus to use the same Bus Standard than the CPU DMA Bus.
|
|
|
|
|
|
- liteeth/phy : Added Artix7 2500BASE-X PHY.
|
|
|
|
|
|
- liteeth/phy : Added Gowin Arora V RGMII PHY (GW5RGMII).
|
2023-09-07 08:27:12 -04:00
|
|
|
|
- liteeth/phy : Added Titanium RGMII PHY (Tested with Ti60 F225 + RGMII adapter board).
|
2023-06-06 05:09:44 -04:00
|
|
|
|
|
|
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2023-07-10 05:23:10 -04:00
|
|
|
|
- litex/gen : Added local version of genlib.cdc/misc to better decouple with Migen and prepare Amaranth's compat use.
|
2023-07-20 09:36:18 -04:00
|
|
|
|
- soc/add_uartbone : Renamed name parameter to uart_name (for consistency with other cores).
|
2023-06-06 05:09:44 -04:00
|
|
|
|
|
2023-05-08 04:59:17 -04:00
|
|
|
|
[> 2023.04, released on May 8th 2023
|
|
|
|
|
|
------------------------------------
|
2023-03-30 04:13:56 -04:00
|
|
|
|
|
|
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
|
|
|
|
|
- build/xilinx/vivado : Fixed Verilog include path.
|
|
|
|
|
|
- builder/meson : Fixed version comparison.
|
|
|
|
|
|
- liblitedram : Fixed write leveling with x4 modules.
|
|
|
|
|
|
- integration/soc : Fixed alignment of origin on size.
|
|
|
|
|
|
- litex_sim : Fixed ram_init.
|
|
|
|
|
|
- libbase/i2c : Fixed various issues.
|
|
|
|
|
|
- integration/soc : Fixed/Removed soc_region_cls workaround.
|
|
|
|
|
|
- cores/gpio : Fixed IRQ generation.
|
|
|
|
|
|
- litex_sim : Fixed --with-etherbone.
|
|
|
|
|
|
- build/efinix : Fixed iface.py execution order.
|
|
|
|
|
|
- cpu/Vex/NaxRiscv : Fixed IRQ numbering (0 reserved).
|
|
|
|
|
|
- cpu/rocket : Fixed compilation with newer binutils.
|
|
|
|
|
|
- cpu/soc : Fixed CPU IRQ reservation.
|
|
|
|
|
|
- litepcie/software : Fixed compilation with DMA_CHECK_DATA commented.
|
|
|
|
|
|
- litedram/dma : Fixed rdata connection (omit list update since LiteX AXI changes).
|
2023-05-05 04:08:11 -04:00
|
|
|
|
- litepcie/US(P) : Fixed possible MSI deadlock.
|
|
|
|
|
|
- cores/usb_ohci : Fixed build issue (usb_clk_freq wrapped as int).
|
2023-03-30 04:13:56 -04:00
|
|
|
|
|
|
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
|
|
|
|
|
- clock/intel : Added StratixVPLL.
|
|
|
|
|
|
- cores/dma : Added FIFO on WishboneDMAReader to pipeline reads and allow bursting.
|
|
|
|
|
|
- liblitedram : Improved SPD read with sdram_read_spd function.
|
|
|
|
|
|
- bios/liblitedram : Added utils and used them to print memory sizes.
|
|
|
|
|
|
- build/parser : Added a method to search default value for an argument.
|
|
|
|
|
|
- litex_setup : Added Arch Linux RISC-V/OR1K/POWER-PC GCC toolchain install.
|
|
|
|
|
|
- cores/pwm : Added reset signal (to allow external reset/synchronization).
|
|
|
|
|
|
- cpu/cva6 : Updated.
|
|
|
|
|
|
- cores/prbs : Improved timings.
|
|
|
|
|
|
- litex_sim : Allowed enabling SDRAM BIST.
|
|
|
|
|
|
- liblitedram : Refactored BIST functions and added sdram_hw_test.
|
|
|
|
|
|
- soc/software : Added extern C (required to link with cpp code).
|
|
|
|
|
|
- cpu/VexRiscv-SMP : Avoided silent generation failure.
|
|
|
|
|
|
- cores/spi_flash : Added Ultrascale support.
|
|
|
|
|
|
- clock/gowin_gw1n : Fixed simulation warnings.
|
|
|
|
|
|
- liblitedram : Various improvements/cleanups.
|
|
|
|
|
|
- cpu/Naxriscv : Exposed FPU parameter.
|
|
|
|
|
|
- cores/xadc : Refactored/Cleaned up.
|
|
|
|
|
|
- cores/dna : Added initial Ultrascale(+) support and reduced default clk_divider to 2.
|
|
|
|
|
|
- cores/usb_ohci : Added support for multiple ports.
|
|
|
|
|
|
- litex_cli : Added binary support for register dump.
|
|
|
|
|
|
- cpu/NaxRiscv : Enabled FPU in crt0.S.
|
|
|
|
|
|
- core/icap : Added initial Ultrascale(+) support and clk_divider parameter.
|
|
|
|
|
|
- litex_sim : Added initial video support.
|
|
|
|
|
|
- soc/add_video : Added framebuffer region definition.
|
|
|
|
|
|
- litex_term : Avoided use of multiprocessing.
|
|
|
|
|
|
- cores/esc : Added initial ESC core with DSHOT 150/300/600 support.
|
|
|
|
|
|
- litex_json2dts : Allowed/Prepared Rocket support and made it more generic.
|
|
|
|
|
|
- gen/common : Added Open/Unsigned/Signed signal definition and updated cores to use it.
|
|
|
|
|
|
- global : Added initial list of sponsors/partners.
|
|
|
|
|
|
- build/xilinx : Improved Xilinx US/US+ support.
|
|
|
|
|
|
- build/platform : Added get_bitstream_extension method.
|
|
|
|
|
|
- cpu/VexRiscvSMP : Added standard variant.
|
|
|
|
|
|
- cpu/cva6 : Added 32-bit variant support and various improvements.
|
|
|
|
|
|
- clock/gowin : Added GW2AR support.
|
|
|
|
|
|
- build/efinix : Added option to select active/passive SPI mode.
|
|
|
|
|
|
- cores/bitbang : Added documentation.
|
|
|
|
|
|
- litex_term : Improved connection setup.
|
|
|
|
|
|
- clock/gowin : Improved VCO config computation and added CLKOUTP/CLKOUTD/CLKOUTD3 support.
|
|
|
|
|
|
- cpu/rocket : Reworked variants.
|
|
|
|
|
|
- liblitesdcard : Avoided use of stop transmission for writes when only one block.
|
|
|
|
|
|
- installation : Simplified/Improved ci.yml/MANIFEST.in/setup.py.
|
|
|
|
|
|
- cores/pwm : Added MultiChannelPWM support.
|
|
|
|
|
|
- soc/add_pcie : Exposed more DMA parameters.
|
|
|
|
|
|
- litepcie/dma : Improved LitePCIeDMAStatus timings.
|
|
|
|
|
|
- litepcie_gen : Exposed 64-bit support.
|
|
|
|
|
|
- litepcie/dma : Better configuration decoupling between DMAWriter/Reader.
|
|
|
|
|
|
- litepcie/dma : Allowed software to get DMA status.
|
|
|
|
|
|
- litepcie/phy : Replaced Xilinx generated core on 7-series Verilog with Migen/LiteX code.
|
|
|
|
|
|
- litepcie/msi : Improved MSI filtering.
|
|
|
|
|
|
- litepcie_gen : Added MSI rate limiting on Ultrascale(+) to avoid stall issues.
|
|
|
|
|
|
- liteiclink/prbs : Improved PRBS RX timings.
|
|
|
|
|
|
- liteiclink/gty/gth : Added power-down signal on GTYQuadPLL and GTHQuadPLL.
|
|
|
|
|
|
- litelclink/gty/gth : Integrated 7-series improvements.
|
|
|
|
|
|
- litelclink/gty/gth : Added DRP interface on QuadPLL.
|
|
|
|
|
|
- litedram/bist : Ensured proper completion of writes.
|
|
|
|
|
|
- litedram/bist : Replicated data for large data-width.
|
|
|
|
|
|
- litedram/ci : Allowed tests to run in parallel.
|
|
|
|
|
|
- litedram/gw2ddrphy : Improvements to remove warnings in simulation.
|
2023-05-05 04:08:11 -04:00
|
|
|
|
- liblitespi/spiflash : Add erasee and write functions.
|
|
|
|
|
|
- liblitespi/Spiflash : Add write from sdcard file function.
|
2023-03-30 04:13:56 -04:00
|
|
|
|
|
|
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
|
|
|
|
|
- builder/export : Added soc-csv/-json/--svd arguments (in addition to csr-xy).
|
|
|
|
|
|
- litepcie/phy : Retained only Gen3/4 support and removed Gen2.
|
|
|
|
|
|
|
2023-01-02 02:53:19 -05:00
|
|
|
|
[> 2022.12, released on January 2th 2023
|
|
|
|
|
|
----------------------------------------
|
2022-09-12 05:08:50 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2022-12-22 07:17:44 -05:00
|
|
|
|
- bios : Fix missing CONFIG_BIOS_NO_DELAYS update.
|
|
|
|
|
|
- axi/AXIDownConverter : Fix unaligned accesses.
|
|
|
|
|
|
- cpu/rocket : Fix fulld/fullq variants typos.
|
|
|
|
|
|
- cores/video : Fix red/blue channel swap (and apply similar changes to litex_boards).
|
|
|
|
|
|
- software/demo : Fix compilation with Nix.
|
|
|
|
|
|
- cpu/cv32e41p : Fix IRQs.
|
|
|
|
|
|
- interconnect/csr : Allow CSR collection at the top-level.
|
|
|
|
|
|
- interconnect/csr : Fix CSR with 64-bit bus width.
|
|
|
|
|
|
- build/sim : Disable more useless warnings (-Wno-COMBDLY and -Wno-CASEINCOMPLETE).
|
|
|
|
|
|
- intel : Fix constraints issues preventing the build with some boards/versions.
|
|
|
|
|
|
- axi/axi_lite : Fix combinatorial loop on ax.valid/ax.ready.
|
|
|
|
|
|
- soc/cores/video/VideoS7GTPHDMIPHY : Fix typo.
|
|
|
|
|
|
- integration/export : Fix CSR base address definition when with_csr_base_define=False.
|
|
|
|
|
|
|
2022-09-12 05:08:50 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2022-12-22 07:17:44 -05:00
|
|
|
|
- soc : Add new "x" (executable) mode to SoCRegion.
|
2023-03-30 04:13:56 -04:00
|
|
|
|
- cpu/NaxRiscv : Update to latest and add parameters.
|
2022-12-22 07:17:44 -05:00
|
|
|
|
- soc : Propagate address_width on dynamically created interfaces.
|
|
|
|
|
|
- get_mem_data : Add data_width support.
|
|
|
|
|
|
- cores/dma : Allow defining ready behavior on idle.
|
|
|
|
|
|
- axi : Improvements/Simplifications.
|
|
|
|
|
|
- axi_stream : Improvements/Simplifications.
|
|
|
|
|
|
- yosys_nextpnr : Add flow3 option to abc9 mode.
|
|
|
|
|
|
- yosys_nextpnr : Refactor args.
|
|
|
|
|
|
- vivado : Allow directive configuration.
|
|
|
|
|
|
- jtag : Add Efinix JTAG support.
|
|
|
|
|
|
- clock/intel : Improve pll calculation.
|
|
|
|
|
|
- stream/ClockDomainCrossing : Expose buffered parameter.
|
|
|
|
|
|
- tools/remote : Add Etherbone packets retransmisson.
|
|
|
|
|
|
- build : Add VHDL2VConverter to simplify GHDL->Verilog conversion.
|
|
|
|
|
|
- cpu/microwatt : Switch to VHDL2VConverter.
|
|
|
|
|
|
- cpu/neorv32 : Switch to VHDL2VConverter.
|
|
|
|
|
|
- axi : Differentiate AXI3/AXI4.
|
|
|
|
|
|
- stream/Monitor : Add packet count and add reset/latch control from logic.
|
|
|
|
|
|
- spi : Create spi directory and integrate SPIBone + improvements.
|
|
|
|
|
|
- interconnect/csr : Add optional fixed CSR mapping.
|
|
|
|
|
|
- fhdl/verilog : Improve code presentation/attribute generation.
|
|
|
|
|
|
- gen/common : Add new LiteXModule to simplify user designs and avoid some Migen common issues.
|
|
|
|
|
|
- soc/SoCBusHandler : Integrate interconnect code to simplify reuse.
|
|
|
|
|
|
- gen/common : Add reduction functions.
|
|
|
|
|
|
- vhd2v : Use GHDL directly (Instead of GHDL + Yosys).
|
|
|
|
|
|
- cpu/openc906 : Update, add more peripherals to mem_map and add debug variant.
|
|
|
|
|
|
- soc/software/i2c : Add non 8bit i2c mem address support.
|
|
|
|
|
|
- gen/fhdl : Add LiteXHierarchyExplorer to generate SoC hierarchy.
|
|
|
|
|
|
- gen/fhd : Add timescale generation.
|
|
|
|
|
|
- build : Add LitexArgumentParser to customize/simplify argument parsing.
|
|
|
|
|
|
- json2renode : Update.
|
|
|
|
|
|
- logging : Allow logging level to be configured from user scripts.
|
|
|
|
|
|
- soc/cores/cpu : Allow enabling/disabling reset address check.
|
|
|
|
|
|
- integration/export : Directly generate extract/replace mask from Python.
|
|
|
|
|
|
- cpu/zync7000 : Add axi_gp_slave support.
|
2022-09-12 05:08:50 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2022-12-22 07:17:44 -05:00
|
|
|
|
- ci : Bump to Ubutu 22.04.
|
|
|
|
|
|
- soc_core : Move add_interrupt/add_wb_master/add_wb_slave/register_mem/register_rom to compat.
|
|
|
|
|
|
- software : Do not build software as PIE.
|
|
|
|
|
|
- ci : Add microwatt/neorv32 test + requirements (GHDL).
|
|
|
|
|
|
- ci : Switch GCC toolchain installs to distro install.
|
2022-09-12 05:08:50 -04:00
|
|
|
|
|
|
|
|
|
|
|
2022-09-12 03:00:36 -04:00
|
|
|
|
[> 2022.08, released on September 12th 2022
|
|
|
|
|
|
-------------------------------------------
|
2022-05-06 07:43:39 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2022-06-22 12:13:49 -04:00
|
|
|
|
- cpu/vexriscv: Fix compilation with new binutils.
|
|
|
|
|
|
- soc/LiteXSocArgumentParser: Fix --cpu-type parsing.
|
|
|
|
|
|
- litex_sim: Fix --with-ethernet.
|
2022-09-01 05:22:25 -04:00
|
|
|
|
- liblitesdcard: Fix SDCard initialization corner cases.
|
|
|
|
|
|
- liblitedram: Enable sdram_init/mr_write for SDRAM.
|
|
|
|
|
|
- export/get_memory_x: Replace SPIFlash with ROM.
|
|
|
|
|
|
- soc/cores/video: Fix operation with some monitors (set data to 0 during blanking).
|
|
|
|
|
|
- tools/remote/comm_usb: Fix multi-word reads/writes.
|
|
|
|
|
|
- build/lattice/oxide: Fix ES posfix on device name.
|
|
|
|
|
|
- interconnect/axi: Fix AXIArbiter corner case.
|
|
|
|
|
|
- litex_server/client: Fix remapping over CommPCIe.
|
|
|
|
|
|
- LitePCIe: Fix LiteUART support with multi-boards.
|
2022-05-06 07:43:39 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2022-09-01 05:22:25 -04:00
|
|
|
|
- litex_setup: Add -tag support for install/update.
|
|
|
|
|
|
- tools: Add initial LiteX standalone SoC generator.
|
|
|
|
|
|
- cores/ram: Add Xilinx's FIFO_SYNC_MACRO equivalent.
|
|
|
|
|
|
- LitePCIe: Always use 24-bit depth fields on LitePCIeBuffering to simplify software.
|
|
|
|
|
|
- gen/fhdl: Integrate Migen namer to give us more flexibility.
|
|
|
|
|
|
- fhdl/memory: Prefix memory files with build name to simplify reuse/integration.
|
|
|
|
|
|
- cpu/rocket: Add more variants.
|
|
|
|
|
|
- cores/video: Enable driving both + and - diff outs to compensate hardware issues.
|
|
|
|
|
|
- build: Add intial OSFPGA Foedag/Raptor build backend.
|
|
|
|
|
|
- cpu/cva5: Add initial CVA5 CPU support (ex Taiga).
|
|
|
|
|
|
- LiteSATA: Add IRQ and Identify support.
|
|
|
|
|
|
- clock/intel: Improve to find the best PLL config.
|
|
|
|
|
|
- cpu/cva6: Add initial CVA6 CPU support (ex Ariane).
|
|
|
|
|
|
- bios: Improve config flags.
|
|
|
|
|
|
- tools: Add I2s/MMCM support to litex_json2dts_zephyr.
|
|
|
|
|
|
- clock/gowin: Add GW2A support.
|
|
|
|
|
|
- bios: Disable LTO (does not work in all cases, needs to be investigated).
|
|
|
|
|
|
- CI: Test more RISC-V CPUs and OpenRisc CPUs in CI.
|
|
|
|
|
|
- bios: Add CONFIG_NO_BOOT to allow disabling boot sequence.
|
|
|
|
|
|
- export: Allow disabling CSR_BASE define in csr.h.
|
|
|
|
|
|
- build/openocd: Update for compatibility with upstream OpenOCD.
|
|
|
|
|
|
- cpu/openc906: Add initial OpenC906 support (open version of the Allwinner's D1 chip).
|
|
|
|
|
|
- soc: Add automatic bridging between AXI <-> AXI-Lite <-> Wishbone.
|
|
|
|
|
|
- soc: Add AXI-Full bus support.
|
|
|
|
|
|
- interconnect: Add AXI DownConverted and Interconnect/Crossbar.
|
|
|
|
|
|
- interconnect: Create axi directory and split code.
|
|
|
|
|
|
- soc: Modify SoC finalization order for more flexibility.
|
|
|
|
|
|
- soc: Add --bus-interconnect parameter to select interconect: shared/crossbar.
|
|
|
|
|
|
- valentyusb: Package and install it with LiteX.
|
|
|
|
|
|
- bios/mem_list: Align Mem Regions.
|
|
|
|
|
|
- build: Introduce GenericToolchain to cleanup/simplify build backends.
|
|
|
|
|
|
- soc/etherbone: Expose broadcast capability.
|
|
|
|
|
|
- build/lattice: Add MCLK frequency support.
|
|
|
|
|
|
- cpu/cva6: Add IRQ support.
|
|
|
|
|
|
- cores/clock: Add manual placement support to ECP5PLL.
|
|
|
|
|
|
- cores/leds: Add polarity support.
|
|
|
|
|
|
- cpu/neorv32: Switch to new NeoRV32 LiteX Core Complex and add variants support.
|
|
|
|
|
|
- cores/gpio: Add optional reset value.
|
|
|
|
|
|
- litex_client: Add --host support for remote operation.
|
|
|
|
|
|
- sim/verilator: Add jobs number support (to limit RAM usage with large SoCs/CPUs).
|
|
|
|
|
|
- soc/SocBusHandler Add get_address_width method to simplify peripheral integration.
|
|
|
|
|
|
- bios: Expose BIOS console parameters (to enable/disable history/autocomplete).
|
|
|
|
|
|
- bios: Expose BIOS LTO configuration.
|
|
|
|
|
|
- litex_json2renode: Update.
|
|
|
|
|
|
- build: Introduce YosysNextPNRToolchain to cleanup/simplify Yosys support.
|
|
|
|
|
|
- bios: Add buttons support/command.
|
|
|
|
|
|
- litex_client: Add XADC/Identifier/Leds/Buttons support to GUI.
|
|
|
|
|
|
- cpu/NaxRiscv: Update.
|
|
|
|
|
|
- build/generic_platofrm: Add add_connector methode to allow extending connectors.
|
|
|
|
|
|
- litex_server/client: Add initial information exchange between server/client.
|
|
|
|
|
|
- LitePCIe: Improve 64-bit support.
|
2022-09-12 03:00:36 -04:00
|
|
|
|
- interconnect/axi: Add missing optional signals.
|
|
|
|
|
|
- interconnect/wishbone: Improve DownConverter efficiency.
|
2022-05-06 07:43:39 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2022-05-06 09:16:48 -04:00
|
|
|
|
- LiteX-Boards : Remove short import support on platforms/targets.
|
|
|
|
|
|
- tools: Rename litex_gen to litex_periph_gen.
|
|
|
|
|
|
- LiteX-Boards: Only generate SoC/Software headers when --build is set
|
2022-06-22 12:13:49 -04:00
|
|
|
|
- Symbiflow: Rename to F4PGA.
|
2022-09-01 05:22:25 -04:00
|
|
|
|
- mkmsscimg: Rename to crcfbigen.
|
2022-05-06 07:43:39 -04:00
|
|
|
|
|
2022-05-03 07:09:30 -04:00
|
|
|
|
[> 2022.04, released on May 3th 2022
|
|
|
|
|
|
------------------------------------
|
2022-01-17 04:17:10 -05:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2022-01-17 04:17:10 -05:00
|
|
|
|
- software/bios/mem_write: Fix write address increment.
|
2022-03-29 05:35:27 -04:00
|
|
|
|
- software/liblitedram: Improve calibration corner case on 7-series (SDRAM_PHY_DELAY_JUMP).
|
|
|
|
|
|
- software/liblitedram: Fix delay reconfiguration issue on ECP5/DDR3.
|
|
|
|
|
|
- cores/jtag: Fix chain parameter on XilinxJTAG.
|
|
|
|
|
|
- soc/arguments: Fix l2_size handling.
|
2022-05-02 08:18:12 -04:00
|
|
|
|
- cpu/vexriscv_smp: Fix pbus_width when using direct LiteDRAM interface.
|
|
|
|
|
|
- libbase/i2c/i2c_poll: Also check for write in i2c_scan (some chips are write only).
|
|
|
|
|
|
- build/vivado: Fix timing constraints application on nets/ports.
|
2022-01-17 04:17:10 -05:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2022-01-17 04:17:10 -05:00
|
|
|
|
- litex_setup: Add minimal/standard/full install configs.
|
|
|
|
|
|
- soc/arguments: Improve default/help, add parser groups.
|
|
|
|
|
|
- LiteSPI/phy: Simplify integration on targets.
|
|
|
|
|
|
- openocd/stream: Simplify ECP5 JTAG-UART/JTAGBone use.
|
|
|
|
|
|
- tools/litex_cli: Allow passing reg name to --read/--write.
|
|
|
|
|
|
- soc/add_spi_sdcard: Allow optional Tristate (useful on ULX3S).
|
2022-02-04 03:01:00 -05:00
|
|
|
|
- software/bios: Add new mem_cmd memory comparison command.
|
2022-01-17 04:17:10 -05:00
|
|
|
|
- cpu/rocket: Increase IRQ lines to 8.
|
|
|
|
|
|
- cpu/serv: Add MDU support.
|
|
|
|
|
|
- cpu/marocchino: Add initial support.
|
|
|
|
|
|
- cpu/eos_s3: Add LiteX BIOS/Bare Metal software support.
|
2022-01-19 03:57:10 -05:00
|
|
|
|
- litex_sim: Add .json support for --rom/ram/sdram-init.
|
2022-01-19 09:42:23 -05:00
|
|
|
|
- soc/add_uart: Allow multiple UARTs in the same design.
|
2022-01-20 03:25:49 -05:00
|
|
|
|
- cores/cpu: Add out-of-tree support.
|
2022-01-31 11:00:12 -05:00
|
|
|
|
- build/xilinx: Add initial Yosys/NextPnr support on Artix7 (and Zynq7000 with Artix7 fabric).
|
|
|
|
|
|
- add_source: Add optional copy to gateware directory.
|
|
|
|
|
|
- cores/jtag: Add initial JTAG-UART/JTAGBone Altera/Intel support.
|
|
|
|
|
|
- LiteScope: Add Samplerate support.
|
2022-02-02 06:05:46 -05:00
|
|
|
|
- cores/bitbang: Add optional I2C initialization by CPU.
|
2022-02-17 04:36:05 -05:00
|
|
|
|
- libliteeth/tftp: Add blocksize support an increase to 1024 bytes (allow 64MB filesize).
|
|
|
|
|
|
- soc/add_sdram: Make AXI integration more flexible (remove some specific Rocket hardcoding).
|
|
|
|
|
|
- cpu/neorv32: Add initial support (RV32I, VHDL converted to Verilog through GHDL-Yosys-synth).
|
2022-03-29 05:35:27 -04:00
|
|
|
|
- cpu/naxriscv: Add initial support (RV32IMA & RV64IMA, already able to run Linux).
|
|
|
|
|
|
- interconnect/axi: Add AXI UpConverter.
|
|
|
|
|
|
- soc/add_sdram: Allow data_width upconversion directly on AXI (avoid switching to Wishbone).
|
|
|
|
|
|
- bios/memtest: Optimize memspeed loop for better accuracy.
|
|
|
|
|
|
- build/sim: Allow custom modules to be in custom path.
|
|
|
|
|
|
- build/OpenFPGA: Add initial OpenFPGA build backend (Currently targeting SOFA chips).
|
|
|
|
|
|
- build/efinix: Add initial MIPI TX/RX support (and test on Trion/Titanium).
|
|
|
|
|
|
- cores/video: VTG improvements to support more Video chips.
|
|
|
|
|
|
- cores/xadc: Improve Zynq Ultrascale+ support.
|
|
|
|
|
|
- LiteScope: Optimize waveform upload speed.
|
|
|
|
|
|
- LitePCIe: Add LTSSM tracer capability to debug PCIe bringup issues.
|
|
|
|
|
|
- cores/hyperbus: Refactor core and improve performances (Automatic burst detection).
|
|
|
|
|
|
- cores/jtag: Add Zynq UltraScale+.
|
|
|
|
|
|
- cores/ram: Add Ultrascale+ HBM2 wrapper.
|
|
|
|
|
|
- litex_json2renode: Improve and add support for more CPUs.
|
|
|
|
|
|
- cores/cpu: Add initial FireV support.
|
|
|
|
|
|
- litex_cli: Add --csr-csv support and minimal GUI (based on DearPyGui).
|
|
|
|
|
|
- litescope_cli: Add minimal GUI (based on DearPyGui).
|
|
|
|
|
|
- build/gowin: Add powershell support.
|
|
|
|
|
|
- LitePCIe: Add initial 64-bit addressing support (Only for 64-bit datapath for now).
|
|
|
|
|
|
- software/bios: Add Main RAM test (when not pre-initialized).
|
|
|
|
|
|
- build/trellis: Enable bitstream compression on ECP5 by default.
|
|
|
|
|
|
- soc/add_etherbone: Increase buffer_depth to 16 (to improve etherbone bursting).
|
|
|
|
|
|
- builder: Add get_bios_filename/get_bitstream_filename methods to simplify targets.
|
|
|
|
|
|
- cpu/vexriscv_smp: Re-integrate Linux-on-LiteX−VexRiscv specific changes/mapping.
|
|
|
|
|
|
- tools/litex_sim: Allow RAM/SDRAM initialization from .json files (similar to hardware).
|
|
|
|
|
|
- soc/cpu: Expose optional CPU configuration parameters to users (ex VexRiscv-SMP/NaxRiscv).
|
|
|
|
|
|
- soc: Improve logs.
|
|
|
|
|
|
- build/Efinix: Add Atmel programmer.
|
2022-05-02 08:18:12 -04:00
|
|
|
|
- stream/cdc: Add optional common reset.
|
|
|
|
|
|
- LiteDRAM: Decouple DQ/DQS widths on S7DDRPHY.
|
|
|
|
|
|
- cores/ws2812: Improve timings at low sys_clk_freq.
|
|
|
|
|
|
- soc/builder: Add --no-compile (similar to --no-compile-gateware --no-compile-software).
|
|
|
|
|
|
- software/demo: Add --mem parameter to allow compilation for execution in ROM/RAM.
|
|
|
|
|
|
- cpu/naxrsicv: Add JTAG debug support.
|
|
|
|
|
|
- cores/usb_fifo: Re-implement FT245PHYSYnchronous.
|
|
|
|
|
|
- cores/jtag: Add JTAGBone/JTAG-UART support on Zynq/ZynqMP.
|
|
|
|
|
|
- interconnect/sram: Add SRAM burst support.
|
|
|
|
|
|
- liblitesata: Improve SATA init.
|
|
|
|
|
|
- soc/cpu: Improve command line listing.
|
|
|
|
|
|
- soc/cores/uart: Decouple data/address width on Stream2Wishbone.
|
2022-01-17 04:17:10 -05:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2022-01-17 04:17:10 -05:00
|
|
|
|
- Fully deprecate SoCSDRAM/SPIFlash core (replaced by LiteSPI).
|
2022-01-19 10:54:56 -05:00
|
|
|
|
- UART "bridge" name deprecated in favor of "crossover" (already supported).
|
2022-01-20 03:25:49 -05:00
|
|
|
|
- "external" CPU class support deprecated (replaced by out-of-tree support).
|
2022-01-26 09:14:54 -05:00
|
|
|
|
- lxterm/lxserver/lxsim short names deprecated (used long litex_xy names).
|
2022-02-01 05:19:36 -05:00
|
|
|
|
- Deprecate JTAG-Atlantic support (Advantageously replaced by JTAG-UART).
|
2022-01-17 04:17:10 -05:00
|
|
|
|
|
2022-01-05 02:53:10 -05:00
|
|
|
|
[> 2021.12, released on January 5th 2022
|
|
|
|
|
|
----------------------------------------
|
2022-01-03 13:29:05 -05:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2022-01-03 13:29:05 -05:00
|
|
|
|
- software/linker: Fix initialized global variables.
|
|
|
|
|
|
- build/xilinx: Fix Ultrascale SDROutput/Input.
|
|
|
|
|
|
- cpu/rocket/crt0.s: Fix alignements.
|
|
|
|
|
|
- core/video: Fix missing ClockDomainsRenamer in specific DRAM's width case.
|
|
|
|
|
|
- mor1kx: Fix --cpu-type=None --with-ethernet case.
|
|
|
|
|
|
- build/lattice: Fix LatticeiCE40SDROutputImpl.
|
|
|
|
|
|
- soc/interconnect/axi: Fix 4KB bursts.
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2022-01-03 13:29:05 -05:00
|
|
|
|
- integration/builder: Check if full software re-build is required when a CPU is used.
|
|
|
|
|
|
- cores/clock: Add Gowin PLL support.
|
|
|
|
|
|
- build/gowin: Add initial HyperRam support.
|
|
|
|
|
|
- build/gowin: Add differential Input/Output support.
|
|
|
|
|
|
- build/lattice: Add DDRTristate support.
|
|
|
|
|
|
- cores/gpio: Add external Tristate support.
|
|
|
|
|
|
- tools/json2dts: Make it more generic (now also used with OpenRisc/Mor1kx).
|
|
|
|
|
|
- cpu/rocket: Add SMP support (up to quad-core).
|
|
|
|
|
|
- software/bios/boot: Allow frame reception to time out (for litex_term auto-calibration).
|
|
|
|
|
|
- tools/litex_term: Add automatic settings calibration and --safe mode.
|
|
|
|
|
|
- build/quicklogic: Add initial support.
|
|
|
|
|
|
- cores/icap/7-Series: Add register read capability.
|
|
|
|
|
|
- cores/video: Add RGB565 support to VideoFrameBuffer.
|
|
|
|
|
|
- soc: Raise custom SoCError Exception and disable traceback/exception.
|
|
|
|
|
|
- soc/add_pcie: Automatically set Endpoint's endianness to PHY's endianness.
|
|
|
|
|
|
- build/efinix: Add initial Trion and Titanium support.
|
|
|
|
|
|
- fhdl/verilog: Cleanup/Simplify verilog generation.
|
|
|
|
|
|
- fhdl/memory: Cleanup/Simplify and add support for Efinix case.
|
|
|
|
|
|
- cpu/ibex: Add interrupt support.
|
|
|
|
|
|
- tools/litex_client: Add --length parameter for MMAP read accesses.
|
|
|
|
|
|
- software/bios/cpu: Add CPU tests in CI.
|
|
|
|
|
|
- litex_sim/xgmii_ethernet: Improve models.
|
|
|
|
|
|
- litex_setup: Cleanup/Simplify and switch to proper "--" commands (with retro-compat).
|
|
|
|
|
|
- cores/jtag: Add ECP5 support.
|
|
|
|
|
|
- cores/led: Add WS2812/NeoPixel core.
|
|
|
|
|
|
- cpu/femtorv: Finish integration and add variants support.
|
|
|
|
|
|
- cpu/eos-s3: Add initial support.
|
|
|
|
|
|
- build/anlogic: Add initial support.
|
|
|
|
|
|
- cpu/microwatt: Add Xilinx multiplier support.
|
|
|
|
|
|
- cpu/vexriscv/cfu: Improve integration.
|
|
|
|
|
|
- soc/interconnect: Add initial AHB support (AHB2Wishbone).
|
|
|
|
|
|
- cpu/gowin_emcu: Add initial Gowin EMCU support.
|
|
|
|
|
|
- cpu/zynq7000: Add initial BIOS/software support.
|
|
|
|
|
|
- cpu/zynq7000: Add TCL support.
|
|
|
|
|
|
- core/prbs: Add error behaviour configuration on saturation.
|
|
|
|
|
|
- software/bios: Add write size option to mem_write cmd.
|
|
|
|
|
|
- LitePCIe/phy: Cleanup 7-Series PHY integration.
|
|
|
|
|
|
- LitePCIe/dma Add LitePCIeDMAStatus module.
|
|
|
|
|
|
- LitePCIe/software: Improve kernel/user-space utilities.
|
|
|
|
|
|
- LiteDRAM/litedram_gen: Improve ECP5 support.
|
|
|
|
|
|
- LiteDRAM/phy: Add initial LPDDR5 support.
|
|
|
|
|
|
- LiteDRAM/frontend: Refactor DRAM FIFO and add optional bypass mode.
|
|
|
|
|
|
- LiteEth/core: Add 32-bit/64-bit datapath support.
|
|
|
|
|
|
- LiteEth/phy: Add 10Gbps / Xilinx XGMII support.
|
|
|
|
|
|
- LiteEth/phy: Add 1Gbps / Efinix RGMII support.
|
|
|
|
|
|
- LiteSPI/phy: Simplify SDR/DDR PHYs.
|
|
|
|
|
|
- LiteHyperBus: Add 16-bit support.
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2022-01-03 13:29:05 -05:00
|
|
|
|
- software: Replace libbase with picolibc (new requirements: meson/ninja).
|
|
|
|
|
|
- amaranth: Switch from nMigen to Amaranth HDL.
|
|
|
|
|
|
|
2021-09-15 09:05:47 -04:00
|
|
|
|
[> 2021.08, released on September 15th 2021
|
|
|
|
|
|
-------------------------------------------
|
2021-05-17 03:58:46 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2021-06-02 04:46:53 -04:00
|
|
|
|
- wishbone/UpConverter: Fix SEL propagation.
|
2021-09-15 06:08:30 -04:00
|
|
|
|
- cores/i2s: Fix SYNC sampling.
|
|
|
|
|
|
- BIOS/lib*: Fix GCC warnings.
|
|
|
|
|
|
- cpu/software: Fix stack alignment issues.
|
|
|
|
|
|
- cpu/blackparrot: Fix integration.
|
|
|
|
|
|
- interconnect/axi: Fix valid signal in connect_to_pads for axi lite.
|
|
|
|
|
|
- software/hw/common: Fix _csr_rd_buf/_csr_wr_buf for sizeof(buf[0]) < CSR_DW_BYTES case.
|
|
|
|
|
|
- software/soc.h: Fix interoperability with assembly.
|
|
|
|
|
|
- interconnect/stream: Fix n=1 case on Multiplexer/Demultiplexer.
|
|
|
|
|
|
- interconnect/axi: Fix BURST_WRAP case on AXIBurst2Beat.
|
|
|
|
|
|
- cpu/VexRiscv-SMP: Fix build without a memory bus.
|
|
|
|
|
|
- cpu/software: Fix CLANG detection.
|
|
|
|
|
|
- build/software: Force a fresh software build when cpu-type/variant is changed.
|
|
|
|
|
|
- cores/uart: Fix TX reset level.
|
|
|
|
|
|
- BIOS: Fix PHDR link error.
|
|
|
|
|
|
- BIOS: Fix build-id link error.
|
|
|
|
|
|
- LiteDRAM: Fix Artix7/DDR3 calibraiton at low speed.
|
2021-05-17 03:58:46 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2021-09-15 06:08:30 -04:00
|
|
|
|
- cores/video: Add 7-Series HDMI PHY over GTPs.
|
|
|
|
|
|
- cores/jtagbone: Allow JTAG chain selection.
|
|
|
|
|
|
- programmer: Add iCESugar programmer.
|
|
|
|
|
|
- cpu/vexriscv: Add CFU support.
|
|
|
|
|
|
- soc/controller: Add separate SoC/CPU reset fields.
|
|
|
|
|
|
- BIOS/liblitedram: Add debug capabilities, minor improvements.
|
|
|
|
|
|
- cpu/femtoRV: Add initial FemtoRV support.
|
|
|
|
|
|
- cores/uart: Cleaned-up, Add optional TX-Flush.
|
|
|
|
|
|
- cores/usb_ohci: Add initial SpinalHDL's USB OHCI support (integrated in Linux-on-LiteX-Vexriscv).
|
|
|
|
|
|
- stream: Add Gate Module.
|
|
|
|
|
|
- soc/builder: Allow linking external software packages.
|
|
|
|
|
|
- soc/software: Allow registering init functions.
|
|
|
|
|
|
- cores/ram: Add init support to Nexus LRAM.
|
|
|
|
|
|
- cores/spi: Add Manual CS Mode for bulk transfers.
|
|
|
|
|
|
- cores/VexRiscv-SMP: Make [ID]TLB size configurable.
|
|
|
|
|
|
- dts: Add GPIO IRQ support.
|
|
|
|
|
|
- programmer/DFUProg: Allow to specify alt interace and to not reboot.
|
|
|
|
|
|
- cores/clock/ecp5: Add dynamic phase adjustment signals.
|
|
|
|
|
|
- tools/litex_sim: Mode SDRAM settings to LiteDRAM's DFI model.
|
|
|
|
|
|
- build/gowin: Add AsyncResetSynchronizer/DDRInput/DDROutput implementations.
|
|
|
|
|
|
- build/gowin: Add On-Chip-Oscillator support.
|
|
|
|
|
|
- build/gowin: Add initial timing constraints support.
|
|
|
|
|
|
- build/attr_translate: Simplify/Cleanup.
|
|
|
|
|
|
- programmer/OpenFPGALoader: Add cable and freq options.
|
|
|
|
|
|
- interconnect/packet: Improve PacketFIFO to handle payload/param separately.
|
|
|
|
|
|
- clock/ecp5: Add 4-output support.
|
|
|
|
|
|
- LiteSPI: Simplified/Cleaned-up, new MMAP architecture, applied to LiteX-Boards.
|
|
|
|
|
|
- soc: Add LiteSPI integration code.
|
|
|
|
|
|
- LitePCIe: DMA/Controller Simplified/Cleaned-up.
|
|
|
|
|
|
- soc/add_cpu: Add memory mapping overrides to build log and make an exception for the CPUNone case.
|
|
|
|
|
|
- programmer: Add ECPprogProgrammer.
|
|
|
|
|
|
- soc/software: Add Random access option to memtest.
|
|
|
|
|
|
- tools: Add Renode generator script.
|
|
|
|
|
|
- tools: Add Zephyr DTS generator script.
|
|
|
|
|
|
- build/io: Add DDRTristate.
|
|
|
|
|
|
- cpu/VexRiscv: Restructure config flags for dcache/icache presence.
|
|
|
|
|
|
- litex_sim: Improve RAM/SDRAM integration and make it closer to LiteX-Boards targets.
|
|
|
|
|
|
- build/sim: Add ODDR/IDDR/DDRSTristate simulation models.
|
|
|
|
|
|
- litex_sim: Add SPIFlash support.
|
|
|
|
|
|
- LiteSPI: Add DDR support and integration in LiteX (rate=1:1, 1:2).
|
|
|
|
|
|
- build/Vivado: Make pre_synthesis/placement/routing commands similar to platform_commands.
|
|
|
|
|
|
- LiteDRAM: Refactor C code generator.
|
|
|
|
|
|
- LiteDRAM: Improve LPDDR4 support.
|
|
|
|
|
|
- LiteDRAM: Reduce ECC granularity.
|
2021-05-17 03:58:46 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2021-05-17 03:58:46 -04:00
|
|
|
|
- soc_core: --integrated-rom-file argument renamed to --integrated-rom-init.
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-03 05:59:42 -04:00
|
|
|
|
[> 2021.04, released on May 3th 2021
|
|
|
|
|
|
------------------------------------
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2021-05-03 05:59:42 -04:00
|
|
|
|
- litex_term: Fix Windows/OS-X support.
|
|
|
|
|
|
- soc/USB-ACM: Fix reset clock domain.
|
|
|
|
|
|
- litex_json2dts: Various fixes/improvements.
|
|
|
|
|
|
- cores/clock: Fix US(P)IDELAYCTRL reset sequence.
|
|
|
|
|
|
- cpu/Vexriscv: Fix Lite variant ABI (has multiplier so can use rv32im).
|
|
|
|
|
|
- BIOS: Fix various compiler warnings.
|
|
|
|
|
|
- LiteSDCard: Fix various issues, enable multiblock reads/writes and improve performance.
|
|
|
|
|
|
- CSR: Fix address wrapping within a CSRBank.
|
|
|
|
|
|
- soc/add_etherbone: Fix UDPIPCore clock domain.
|
|
|
|
|
|
- stream/Gearbox: Fix some un-supported cases.
|
|
|
|
|
|
- cpu/VexRiscv-SMP: Fix build on Intel/Altera devices with specific RAM implementation.
|
|
|
|
|
|
- timer: Fix AutoDoc.
|
|
|
|
|
|
- Microwatt/Ethernet: Fix build.
|
|
|
|
|
|
- soc/software: Link with compiler instead of ld.
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2021-05-03 05:59:42 -04:00
|
|
|
|
- Lattice-NX: Allow up to 320KB RAMs.
|
|
|
|
|
|
- BIOS: Allow compilation with UART disabled.
|
|
|
|
|
|
- litex_json2dts: Simplify/Improve and allow VexRiscv/Mor1kx support.
|
|
|
|
|
|
- BIOS/i2c: Improve cmd_i2c.
|
|
|
|
|
|
- BIOS/liblitedram: Various improvements for DDR4/LPDDR.
|
|
|
|
|
|
- cores/Timer: Add initial unit test.
|
|
|
|
|
|
- cores: Add initial JTAGBone support on Xilinx FPGAs.
|
|
|
|
|
|
- litex_term: Improve JTAG-UART support.
|
|
|
|
|
|
- litex_server: Add JTAGBone support.
|
|
|
|
|
|
- VexRiscv-SMP: Add --without-out-of-order and --with-wishbone-memory capabilities.
|
|
|
|
|
|
- BIOS: Allow specify TRIPLE with LITEX_ENV_CC_TRIPLE.
|
|
|
|
|
|
- litex_client: Add simple --read/--write support.
|
|
|
|
|
|
- OpenFPGALoader: Add flash method.
|
|
|
|
|
|
- litex_sim: Add GTKWave savefile generator.
|
|
|
|
|
|
- litex_term: Add nios2-terminal support.
|
|
|
|
|
|
- cpu/mor1kx: Add initial SMP support.
|
|
|
|
|
|
- interconnect/axi: Add tkeep support.
|
|
|
|
|
|
- cores/gpio: Add IRQ support to GPIOIn.
|
|
|
|
|
|
- cpu: Add initial lowRISC's Ibex support.
|
|
|
|
|
|
- build/xilinx/Vivado: Allow tcl script to be added as ip.
|
|
|
|
|
|
- cores/uart: Rewrite PHYs to reduce resource usage and improve readability.
|
|
|
|
|
|
- cores/pwm: Add configurable default enable/width/period values.
|
|
|
|
|
|
- cores/leds: Add optional dimming (through PWM).
|
|
|
|
|
|
- soc/add_pcie: Allow disabling MSI when not required.
|
|
|
|
|
|
- export/svd: Add constants to SVD export.
|
|
|
|
|
|
- BIOS: Allow dynamic Ethernet IP address.
|
|
|
|
|
|
- BIOS: Add boot command to boot from memory.
|
|
|
|
|
|
- cores: Add simple VideoOut core with Terminal, ColorBards, Framebuffer + various PHYs (VGA, DVI, HDMI, etc...).
|
|
|
|
|
|
- csr/EventSourceProcess: Add rising edge support and edge selection.
|
|
|
|
|
|
- soc/integration: Cleanup/Simplify soc_core/builder.
|
|
|
|
|
|
- soc/integrated_rom: Add automatic BIOS ROM resize to minimize blockram usage and improve flexibility.
|
|
|
|
|
|
- interconnect/axi: Add AXILite Clock Domain Crossing.
|
|
|
|
|
|
- cores/xadc: Add Ultrascale support.
|
|
|
|
|
|
- soc/add_ethernet: Allow nrxslots/ntxslots configuration.
|
|
|
|
|
|
- cpu/VexRiscv-SMP: Integrate FPU/RVC support.
|
|
|
|
|
|
- soc/add_csr: Add auto-allocation mode and switch to it in LiteX's code base.
|
|
|
|
|
|
- soc/BIOS: Add method to check BIOS requirements during the build and improve error message when not satisfied.
|
|
|
|
|
|
- LiteEth: Add initial timestamping support.
|
|
|
|
|
|
- litex_client: Add optional filter to --regs.
|
|
|
|
|
|
- LiteDRAM: Add LPDDR4 support.
|
|
|
|
|
|
- BIOS/netboot: Allow specifying .json file.
|
|
|
|
|
|
- cores/clock: Add initial Gowin GW1N PLL support.
|
|
|
|
|
|
- LiteSDCard: Add IRQ support.
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2021-05-03 05:59:42 -04:00
|
|
|
|
- platforms/targets: Move all platforms/targets to https://github.com/litex-hub/litex-boards.
|
|
|
|
|
|
- litex_term: Remove flashing capability.
|
|
|
|
|
|
- cores/uart: Disable dynamic baudrate by default (Unused and save resources).
|
|
|
|
|
|
|
2020-12-30 10:49:15 -05:00
|
|
|
|
[> 2020.12, released on December 30th 2020
|
|
|
|
|
|
------------------------------------------
|
2020-10-01 05:46:43 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2020-10-01 05:46:43 -04:00
|
|
|
|
- fix SDCard writes.
|
|
|
|
|
|
- fix crt0 .data initialize on SERV/Minerva.
|
2020-12-30 03:06:36 -05:00
|
|
|
|
- fix Zynq7000 AXI HP Slave integration.
|
2020-10-01 05:46:43 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2020-12-30 03:06:36 -05:00
|
|
|
|
- Wishbone2CSR: Add registered version and use it on system with SDRAM.
|
|
|
|
|
|
- litex_json2dts: Add Mor1kx DTS generation support.
|
|
|
|
|
|
- Build: Add initial Radiant support for NX FPGA family.
|
|
|
|
|
|
- SoC: Allow ROM to be optionally writable (for contents overwrite over UARTBone/Etherbone).
|
|
|
|
|
|
- LiteSDCard: Improve BIOS support.
|
|
|
|
|
|
- UARTBone: Add clock domain support.
|
|
|
|
|
|
- Clocking: Uniformize reset on iCE40PLL/ECP5PLL.
|
|
|
|
|
|
- LiteDRAM: Improve calibration and add BIOS debug commands.
|
|
|
|
|
|
- Clocking: Add initial Ultrascale+ support.
|
2020-10-01 05:46:43 -04:00
|
|
|
|
- Sim: Allow dynamic enable/disable of tracing.
|
2020-12-30 03:06:36 -05:00
|
|
|
|
- BIOS: Improve memtest and report.
|
|
|
|
|
|
- BIOS: Rename/reorganize commands.
|
|
|
|
|
|
- litex_server: Simplify usage with PCIe and add debug parameter.
|
|
|
|
|
|
- LitePCIe: Add Ultrascale(+) support up to Gen3 X16.
|
|
|
|
|
|
- LiteSATA: Add BIOS/Boot integration.
|
2020-10-30 10:41:36 -04:00
|
|
|
|
- Add litex_cli to provides common RemoteClient functions: get identifier, dump regs, etc...
|
2020-12-30 03:06:36 -05:00
|
|
|
|
- LiteDRAM: Simplify BIST integration.
|
|
|
|
|
|
- Toolchains/Programmers: Improve checks/error reporting.
|
|
|
|
|
|
- BIOS: add leds command.
|
|
|
|
|
|
- SoC: Do a full reset of the SoC on reboot (not only the CPU).
|
|
|
|
|
|
- Etherbone: Improve efficiency/performance.
|
|
|
|
|
|
- LiteDRAM: Improve DDR4/DDR3 calibration.
|
|
|
|
|
|
- Build: Add initial Oxide support for NX FPGA family.
|
|
|
|
|
|
- Clock/RAM: Reorganize for better modularity.
|
|
|
|
|
|
- SPI-OPI: Various improvements for Betrusted.
|
|
|
|
|
|
- litex_json2dts: Improvements to use it with mor1kx and VexRiscv-SMP.
|
2020-12-30 10:49:15 -05:00
|
|
|
|
- Microwatt: Add IRQ support.
|
2020-12-30 03:06:36 -05:00
|
|
|
|
- BIOS: Add i2c_scan command.
|
|
|
|
|
|
- Builder: Simplify Documentation generation with --doc args on targets.
|
|
|
|
|
|
- CSR: Add documentation to EventManager registers.
|
|
|
|
|
|
- BIOS: Allow disabling timestamp for reproducible builds.
|
|
|
|
|
|
- Symbiflow: Remove workarounds on targets.
|
|
|
|
|
|
- litex_server: Simplify use on PCIe, allow direct CommXY use in scripts to bypass litex_server.
|
|
|
|
|
|
- Zynq7000: Improve PS7 configuration support (now supporting .xci/preset/dict)
|
|
|
|
|
|
- CV32E40P: Improve OBI efficiency.
|
|
|
|
|
|
- litex_term: Improve upload speed with CRC check enabled, deprecate --no-crc (no longer useful).
|
|
|
|
|
|
- BIOS: Add mem_list command to list available memory and use mem_xy commands on them.
|
|
|
|
|
|
- litex_term: Add Crossover and JTAG_UART support.
|
|
|
|
|
|
- Software: Add minimal bare metal demo app.
|
|
|
|
|
|
- UART: Add Crossover+Bridge support.
|
|
|
|
|
|
- VexRiscv-SMP: Integrate AES support.
|
|
|
|
|
|
- LitePCIe: Allow AXI mastering from FPGA (AXI-Lite and Full).
|
|
|
|
|
|
- mor1kx: Add standard+fpu and linux+fpu variants.
|
2020-10-01 05:46:43 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2020-10-01 05:46:43 -04:00
|
|
|
|
- BIOS: commands have been renamed/reorganized.
|
|
|
|
|
|
- LiteDRAM: rdcmdphase/wrcmdphase no longer exposed.
|
2020-10-07 10:35:08 -04:00
|
|
|
|
- CSR: change default csr_data_width from 8 to 32.
|
2020-10-01 05:46:43 -04:00
|
|
|
|
|
2020-12-30 10:49:15 -05:00
|
|
|
|
[> 2020.08, released on August 7th 2020
|
|
|
|
|
|
---------------------------------------
|
2020-05-01 13:07:43 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2020-05-04 03:59:01 -04:00
|
|
|
|
- Fix flush_cpu_icache on VexRiscv.
|
2020-06-23 06:49:36 -04:00
|
|
|
|
- Fix `.data` section placed in rom (#566)
|
2020-05-01 13:07:43 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2020-06-02 09:05:46 -04:00
|
|
|
|
- Properly integrate Minerva CPU.
|
|
|
|
|
|
- Add nMigen dependency.
|
|
|
|
|
|
- Pluggable CPUs.
|
|
|
|
|
|
- BIOS history, autocomplete.
|
|
|
|
|
|
- Improve boards's programmers.
|
|
|
|
|
|
- Add Microwatt CPU support (with GHDL-Yosys-plugin support for FOSS toolchains).
|
|
|
|
|
|
- Speedup Memtest using an LFSR.
|
|
|
|
|
|
- Add LedChaser on boards.
|
2020-05-14 03:34:37 -04:00
|
|
|
|
- Improve WishboneBridge.
|
|
|
|
|
|
- Improve Diamond constraints.
|
2020-06-02 09:05:46 -04:00
|
|
|
|
- Use InterconnectPointToPoint when 1 master,1 slave and no address translation.
|
|
|
|
|
|
- Add CV32E40P CPU support (ex RI5CY).
|
|
|
|
|
|
- JTAG UART with uart_name=jtag_uart (validated on Spartan6, 7-Series, Ultrascale(+)).
|
|
|
|
|
|
- Add Symbiflow experimental support on Arty.
|
2020-07-22 17:10:26 -04:00
|
|
|
|
- Add SDCard (SPI and SD modes) boot from FAT/exFAT filesystems with FatFs.
|
2020-06-11 13:24:54 -04:00
|
|
|
|
- Simplify boot with boot.json configuration file.
|
2020-06-23 06:49:36 -04:00
|
|
|
|
- Revert to a single crt0 (avoid ctr/xip variants).
|
2020-07-22 17:10:26 -04:00
|
|
|
|
- Add otional DMA bus for Cache Coherency on CPU(s) with DMA/Cache Coherency interface.
|
|
|
|
|
|
- Add AXI-Lite bus standard support.
|
2020-07-28 12:37:23 -04:00
|
|
|
|
- Add VexRiscv SMP CPU support.
|
2020-05-01 13:07:43 -04:00
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2020-05-14 03:34:37 -04:00
|
|
|
|
- Add --build --load arguments to targets.
|
2020-05-27 12:45:07 -04:00
|
|
|
|
- Deprecate soc.interconnect.wishbone.UpConverter (will be rewritten if useful).
|
|
|
|
|
|
- Deprecate soc.interconnect.wishbone.CSRBank (Does not seem to be used by anyone).
|
|
|
|
|
|
- Move soc.interconnect.wishbone2csr.WB2CSR to soc.interconnect.wishbone.Wishbone2CSR.
|
|
|
|
|
|
- Move soc.interconnect.wishbonebridge.WishboneStreamingBridge to soc.cores.uart.Stream2Wishbone.
|
2020-06-02 09:05:46 -04:00
|
|
|
|
- Rename --gateware-toolchain target parameter to --toolchain.
|
2020-07-23 12:02:58 -04:00
|
|
|
|
- Integrate Zynq's PS7 as a regular CPU (zynq7000) and deprecate SoCZynq.
|
2020-05-01 13:07:43 -04:00
|
|
|
|
|
2020-12-30 10:49:15 -05:00
|
|
|
|
[> 2020.04, released on April 28th, 2020
|
|
|
|
|
|
----------------------------------------
|
2020-04-28 05:36:44 -04:00
|
|
|
|
|
|
|
|
|
|
[> Description
|
|
|
|
|
|
--------------
|
|
|
|
|
|
First release of LiteX and the ecosystem of cores!
|
|
|
|
|
|
|
|
|
|
|
|
LiteX is a Migen/MiSoC based Core/SoC builder that provides the infrastructure to easily create
|
|
|
|
|
|
Cores/SoCs (with or without CPU).
|
|
|
|
|
|
|
|
|
|
|
|
The common components of a SoC are provided directly:
|
|
|
|
|
|
- Buses and Streams (Wishbone, AXI, Avalon-ST)
|
|
|
|
|
|
- Interconnect
|
|
|
|
|
|
- Common cores (RAM, ROM, Timer, UART, etc...)
|
|
|
|
|
|
- CPU wrappers/integration
|
|
|
|
|
|
- etc...
|
|
|
|
|
|
And SoC creation capabilities can be greatly extended with the ecosystem of LiteX cores (DRAM,
|
|
|
|
|
|
PCIe, Ethernet, SATA, etc...) that can be integrated/simulated/build easily with LiteX.
|
|
|
|
|
|
|
|
|
|
|
|
It also provides build backends for open-source and vendors toolchains.
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Fixed
|
|
|
|
|
|
--------
|
2020-04-28 05:36:44 -04:00
|
|
|
|
- NA
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Added
|
|
|
|
|
|
--------
|
2020-04-28 05:36:44 -04:00
|
|
|
|
- NA
|
|
|
|
|
|
|
2022-12-22 06:26:55 -05:00
|
|
|
|
[> Changed
|
|
|
|
|
|
----------
|
2020-04-28 05:36:44 -04:00
|
|
|
|
- https://github.com/enjoy-digital/litex/pull/399: Converting LiteX to use Python modules.
|