e82b540a96
mibuild/sim: remove server and interact with tap directly in cpp tb. for now: - need to create tap manually: create tap: openvpn --mktun --dev tap0 ifconfig tap0 192.168.0.14 up mknod /dev/net/tap0 c 10 200 delete tap: openvpn --rmtun --dev tap0 - ARP request/reply OK - TFTP request OK - need to be tested with TFTP server. - need clean up
2015-03-09 13:30:21 +01:00
3e84c66ba9
vivado: permit resources without pins
...
This is required if the LOC is done by another, external constraints set,
as in the case of the Zynq Processing System Instance.
2015-03-09 13:30:19 +01:00
e60a97534b
mibuild/sim: able to visualize arp requests with wireshark
...
now need to find why that is not responding...
2015-03-06 20:16:30 +01:00
a64acdfa65
mibuild/sim: able to send ethernet frame from sim to server.py
2015-03-06 12:49:56 +01:00
0029b87628
mibuild/sim: add ethernet pins to verilor.py
2015-03-06 12:20:17 +01:00
658d4d4c49
platforms/sim: add ethernet pins
2015-03-06 10:20:26 +01:00
3d7f9fd685
mibuild/sim/server_tb: use SERIAL_SINK_ACK
2015-03-04 00:55:35 +01:00
2d6fbd7902
mibuild/sim: use /tmp/simsocket sockaddr for server
2015-03-03 22:52:28 +01:00
f4b060f6fe
mibuild/sim: avoid updating end at each cycle (simulation speedup)
2015-03-03 18:01:14 +01:00
5ec26a49c3
mibuild/sim: simplify console_tb with sim struct
2015-03-03 17:57:58 +01:00
991572f4fe
mibuild/sim: create server.py and server_tb (Proof of concept OK with flterm)
...
Using a server allow us to create a virtual UART (and ethernet TAP in the future).
1) start the server
2) start flterm on the virtual serial port created by the server
3) run the simulation
This will enable us to do serialboot and netboot in simulation.
This will also enable prototyping ethernet for ARTIQ in simulation.
2015-03-03 17:38:22 +01:00
f154c2e7ec
xilinx/programmer/vivado: fix Linux support
2015-03-03 02:06:39 +00:00
154ad54a8e
platforms/kc705: fix imports
2015-03-03 02:03:14 +00:00
a56fce045b
Merge branch 'master' of http://github.com/m-labs/migen
2015-03-02 23:24:48 +01:00
29c5bb8bcd
mibuild/sim/verilator: remove verilator_root, use -Wno-fatal and add verbose option (verbose disabled by default)
2015-03-02 23:23:23 +01:00
36f4b68dd8
mibuild/sim: style fixes
2015-03-02 21:56:20 +00:00
382ca374c3
mibuild: initial Verilator support
2015-03-01 18:27:46 +01:00
961b4bfb4c
platforms/pipistrello: remove unconnected SDRAM pins
2015-02-28 16:20:44 -07:00
03431ece9f
pipistrello: fix ddram dqs, cleanup constraints, add pullup/downs
2015-02-28 16:16:47 -07:00
75290aa0f3
pipistrello: switch back to xc3sprog and fast (papilio) speed
2015-02-28 16:16:47 -07:00
eb8ba145de
kx705: add programmer parameter
2015-02-28 23:34:57 +01:00
b53e2b0d6e
fix xilinx/programmer with Vivado
2015-02-28 19:33:20 +01:00
87d8ff2de7
xilinx/programmer: add source of vivado's settings (need to be tested on a linux machine)
2015-02-28 03:38:47 +01:00
54a8a52e90
xilinx/programmer: add partial flash_bitstream for vivado (can flash full bitstream, need to be adapted to flash part of the flash (bios, ...))
2015-02-27 09:05:23 +01:00
2b0937153d
xilinx/programmer: fix xc3sprog (GenericProgrammer)
2015-02-26 21:36:15 -07:00
8de5b947bd
pipistrello: use fpgaprog
2015-02-26 21:34:02 -07:00
ca52aa5b8c
add fpgaprog programmer
2015-02-26 21:33:49 -07:00
5b5d2d15b8
add pipistrello platform
2015-02-26 21:33:42 -07:00
ba26a400e3
Merge branch 'master' of https://github.com/m-labs/migen
2015-02-26 21:32:39 -07:00
28c219ebd2
platforms/kc705: add user SMA clock
2015-02-26 16:22:22 -07:00
dbdb263acc
mibuild/kc705: add missing pins on FMC LPC
2015-02-26 15:54:41 -07:00
8da1faf310
mibuild: move identifier to platforms
2015-02-26 19:00:43 +01:00
e6a21b2305
mibuild: fix missing xilinx_common -->xilinx.common change
2015-02-26 14:04:36 +01:00
bd5ed0977b
platforms: add default_clk_freq/default_clk_name (to use it on simple designs to test MiSOC on various platforms)
2015-02-26 12:51:57 +01:00
e27a94e7fc
mibuild: add VivadoProgrammer (only load_bitstream)
2015-02-26 12:31:19 +01:00
b3faf5f0da
mibuild: better file organization (create directory for each vendor and move programmers in it)
2015-02-26 12:25:59 +01:00
5bb1c789aa
mibuild/kc705: add FMC connectors
2015-02-18 08:32:45 -07:00
cea1551ae0
mibuild: support pin names in IO extensions
2015-02-18 08:32:31 -07:00
d51d33af73
mibuild: make resolve_signals public
2015-02-14 03:05:07 -08:00
beef7425ce
mibuild: return verilog namespace with build
2015-02-14 03:02:47 -08:00
6fca1dd4dc
mibuild/xilinx_vivado: fix list aliasing problem
2014-12-21 17:37:11 +08:00
8576b91290
xilinx_vivado: add parameters to pass specific commands (to be declared in platforms)
2014-12-21 17:35:42 +08:00
b87ad1af63
xilinx_vivado: use REM for comment on Windows
2014-11-20 15:27:14 -08:00
dff3a17711
mibuild/programmer: add migen folders to flash proxy search dirs
2014-11-05 23:23:22 +08:00
648ab8fa7a
kc705: add Ethernet pins
2014-11-01 21:11:47 +08:00
c0c04a1878
xilinx_vivado: use .bat on Windows platforms (otherwise Vivado uses Unix scripts...)
2014-11-01 20:59:19 +08:00
51f699758c
xilinx_vivado: add hierarchical utilization report
2014-11-01 20:57:54 +08:00
dbaeaf7833
remove trailing whitespaces
2014-10-17 17:08:46 +08:00
4328122a9c
vivado: add more reporting
2014-09-04 15:25:34 +08:00
7c19e43444
vivado: mode batch to prevent vivado from opening tcl shell on error
2014-09-04 15:25:34 +08:00
f21e05025d
platforms/kc705: use jtaghs1_fast cable
2014-09-03 17:29:26 +08:00
644fa8ec55
kc705: enable DCI termination on DDR3
2014-09-02 10:54:38 +08:00
402c7db63c
platforms/kc705: read the configuration flash faster (ISE only)
2014-08-22 18:44:10 +08:00
cb5894b33c
platforms: add -w option to bitgen_opt
2014-08-22 18:26:25 +08:00
7f4e51253e
kc705: add spiflash pins
2014-08-22 10:32:58 +08:00
c19d134978
vivado: enable bitstream compression (optional)
2014-08-21 20:22:08 +08:00
7e77254c57
vivado: make tcl a list of commands, add reporting
2014-08-18 11:01:56 +08:00
c61f96588a
mibuild/programmer: remove unneeded needs_flash_proxy attr
2014-08-09 14:28:15 +08:00
54c63275e0
platforms/kc705: remove DDR3 multirank pins
2014-08-09 10:56:59 +08:00
5fb221e7d9
typo
2014-08-06 23:58:09 +08:00
7ebf08db5e
mibuild/xilinx: connect CE on reset synchronizer FFs
2014-08-06 23:51:50 +08:00
b124a98d92
genlib: add reset synchronizer
2014-08-06 19:38:37 +08:00
4d382328d5
mibuild/xilinx: share more code between ISE and Vivado, use special overrides with Vivado, merge xilinx_tools into xilinx_common
2014-08-06 19:26:00 +08:00
8a7afff30a
platforms/kc705: fix speed grade
2014-08-03 17:51:44 +08:00
8adf6027e1
platforms/kc705: add automatic clk200 constraint
2014-08-03 15:53:58 +08:00
40dcc8b2aa
platforms/kc705: use XC3SProg
2014-08-03 15:53:42 +08:00
210cb720c1
platforms/kc705: use Vivado by default
2014-08-03 15:53:21 +08:00
536a220679
mibuild/programmer: fix XC3SProg init
2014-08-03 15:52:34 +08:00
a0d0742664
mibuild/generic_platform: add recursive parameter to add_source_dir
2014-08-02 21:25:51 +08:00
82068267db
mibuild: move programmer to mibuild and create programmer directly in platforms
2014-08-01 08:03:36 +08:00
244ee52381
kc705/ddram: use lighter pin syntax
2014-07-30 10:31:26 +08:00
9cf204598a
mibuild/xilinx_vivado: allow sharing Misc constraints with ISE: example: ISE: DIFF_TERM=True VIVADO: set property DIFF_TERM TRUE
2014-07-30 10:10:41 +08:00
84eb146e0a
kc705: add ddram pins
2014-07-28 21:35:18 -06:00
fe1c4535d0
mibuild.xilinx_vivado: support settingsXX.sh
...
* in the process refactor the version search, the architecture bit width
detection, the settings search and all also for xilinx_ise
* use distutils.version.StrictVersion
2014-07-27 19:50:15 -06:00
a53feba8a1
mibuild/platforms: add APF27 and APF51 Armadeus platforms
2014-07-11 11:07:54 -06:00
f45897c97f
mibuild/generic_platform.py: adding ability to use void pins (none fpga pin) for connectors
...
Signed-off-by: Fabien Marteau <fabien.marteau@armadeus.com>
2014-07-09 10:41:51 +02:00
f6dfabf7a9
mibuild/xilinx_vivado.py: add set property to misc constraint
2014-06-28 16:15:07 +02:00
7ad1028f8b
mibuild: use SimpleCRG instead of CRG_SE, remove period parameter for CRG_DS, clean up platforms
2014-06-20 17:29:29 +02:00
26717a49fe
kc705: use string default arg
2014-06-07 13:41:46 +02:00
be0d86f57f
initial Vivado support
2014-06-07 12:24:28 +02:00
518a6822d9
mibuild/platforms: use add_period_constraint
2014-05-21 21:02:06 +02:00
a1a57fd962
mibuild: expose add_period_constraint (easier to use for simple designs than vendor specific code)
2014-05-21 21:02:06 +02:00
6c78e6f729
mibuild/altera_quartus: use default gui command line parameters (enable pll constraints propagation) and remove deprecated methods
2014-05-21 21:02:06 +02:00
e9db646134
mibuild: remove useless 'reduce_control_sets auto'
2014-05-12 19:11:11 +02:00
65e8b2742a
de0nano: call sdram mask dm, not dqm (follow other platforms and gensdrphy)
2014-04-25 10:40:26 +02:00
8c03cb0491
mibuild: force shell script generation to unix format (will be executed with cygwin's bash on windows)
2014-04-17 19:43:56 +02:00
d1a96bc49f
mibuild/altera_quartus: enforce use of SystemVerilog in Quartus (Verilog does not support global parameters)
2014-04-17 19:43:24 +02:00
fef08e8c70
mibuild: add bitstream_ext parameter to platforms
2014-04-11 23:28:39 +02:00
82e4980f5c
mibuild/altera_quartus: set top_level_entity
2014-04-11 23:27:04 +02:00
600ce55f91
mibuild/altera_quartus: add support for verilog include
2014-04-11 23:24:51 +02:00
e94f30f15d
mibuild/xilinx_ise: move overwrite option to default options
2014-04-05 12:15:15 +02:00
9ff6cc8403
mibuild/xilinx: make par and map options configurable
2014-04-05 12:15:14 +02:00
bf6ab2b4f6
mibuild/generic_platform: fix default value for connectors
2014-02-17 17:40:15 +01:00
c98b9ecbcb
mibuild/platforms/papilio_pro: add expansion connectors
2014-02-16 23:54:11 +01:00
cb2c9f9f7a
mibuild: support for expansion connectors
2014-02-16 23:53:50 +01:00
4e9dc297fd
platforms/rhino: add GPMC wait pin
2013-12-14 14:32:34 +01:00
3196462311
add support for Verilog include paths
2013-12-12 23:17:51 +01:00
fe0263bb9a
mibuild/xilinx_ise: use ngdbuild_opt also for xst case
2013-12-06 12:15:22 +01:00
0aa6329edb
mibuild/xilinx_ise: add support for custom tools and options
2013-12-06 09:16:07 +01:00
e09e85ec8e
usrp_b100 platform
2013-12-03 22:51:52 +01:00
5447eb51ba
add zedboard platform
2013-12-03 22:51:52 +01:00
bfdc14fbc3
add initial ztex_115d platform
2013-12-03 22:51:52 +01:00
8d093a4a08
lx9 fixups
2013-12-03 22:51:52 +01:00
de830dc743
mibuild: use keyword arguments directly in build_cmdline
2013-12-01 17:56:07 +01:00
80be6acfd1
mibuild: add support for Yosys
2013-12-01 17:07:48 +01:00
6140fd2594
platforms/papilio_pro: add 2x SPI pins
2013-11-25 15:14:58 +01:00
6e48682a5e
platforms/papilio_pro: fix clock signal handling
2013-11-24 23:42:31 +01:00
c514fdc4a3
platforms/m1: use definition compatible with Mixxeo for VGA out
2013-11-24 14:00:22 +01:00
8efd9d11dc
remove stale .gitignore
2013-11-23 15:16:27 +01:00
be3b603b17
merge Mibuild into Migen
2013-11-23 10:45:15 +01:00
62ec66bc00
Add 'mibuild/' from commit '9d5931c969810a236de2a2713cfd5e509839d097'
...
git-subtree-dir: mibuild
git-subtree-mainline: 7e4024beb39d5931c969
2013-11-23 10:34:28 +01:00
9d5931c969
platforms/mixxeo: update DVI input timing constraints
2013-11-19 23:15:42 +01:00
140ddd31a4
mixxeo: add DVI output pins
2013-09-17 18:14:41 +02:00
72eb523f7d
Merge branch 'master' of github.com:milkymist/mibuild
2013-09-16 19:17:09 +02:00
df7ca037cb
mixxeo: use -2 speed grade
2013-09-16 19:17:00 +02:00
ebe8a27de9
mixxeo: swap pairs 0 and 1 on DVI1
2013-09-14 19:36:02 +02:00
d57344b8ae
platforms/mixxeo: add LED
2013-09-06 23:10:01 +02:00
9569152309
altera_quartus: fix import _Fragment
2013-08-26 20:13:30 +02:00
316faa7fa8
platforms/m1: resetless by default
2013-08-14 00:46:30 +02:00
4ebbfa63bf
add mist synthesis mode to build
2013-08-12 13:13:25 +02:00
88611be368
xilinx_ise: cleanup
2013-08-08 00:15:35 +02:00
9d531ba06a
Fix missing string replace. Added support for 32-bit ISE if 64-bit version is missing on 64-bit system.
2013-08-08 00:07:35 +02:00
6e64016885
add edif build routines
2013-08-03 10:55:12 +02:00
275a7ea94a
Change license to BSD
2013-08-01 17:46:09 +02:00
702471aa3c
platforms/mixxeo: new pin assignments to ease routing
2013-07-29 12:24:49 +02:00
f7f19b78e4
Fragment -> _Fragment
2013-07-26 15:13:24 +02:00
78776b4bc9
platforms/mixxeo: new pin assignments for 4 HDMI input ports
2013-07-21 15:55:31 +02:00
b18cffb5e8
xilinx_ise: run tools like Project Navigator does to avoid weird bitgen behavior
2013-07-04 23:49:12 +02:00
05bc2885e9
Call finalize() after CRG creation
2013-07-04 19:49:39 +02:00
71c2c5813b
platforms/mixxeo: remove bank 3 DVI inputs
2013-07-04 19:27:28 +02:00
0883e99de3
Do not specify period constraints twice
2013-07-04 19:25:29 +02:00
0784cd164f
Add Mixxeo platform
2013-07-04 19:23:25 +02:00
1f3c941a78
platforms/m1: move generic platform commands to do_finalize
2013-07-04 19:22:59 +02:00
7e4552bbfc
lx9_microboard: improve compat with other boards
2013-06-27 19:30:57 +02:00
c1cf37f05a
add Avnet Spartan6 LX9 Micrboard platform
2013-06-27 19:18:47 +02:00
e233c62d27
* generic_platform.py: add a finalize() method
...
... to add e.g. timing constraints after the other modules have
had their say and when the signal names are known
2013-06-27 19:17:02 +02:00
6b56428a21
Shorter multipin signal definition
2013-06-25 22:57:31 +02:00
953e603915
xilinx_ise: improve parameter passing
2013-06-01 17:22:57 +02:00
548f2685bb
platform/rhino: rename ismm data out signal to locked
2013-05-30 11:06:02 +02:00
759858f739
Use migen.fhdl.std
2013-05-26 18:07:26 +02:00
e272e68fac
platforms/papilio_pro: swap tx/rx to be consistent with M1
2013-05-19 20:24:47 +02:00
fe64ade1ac
platforms/m1: add pots pins
2013-05-13 15:38:20 +02:00
7a2f31b2e8
platforms/papilio_pro: no reset signal by default
2013-05-07 19:10:18 +02:00
439f032921
crg: support for resetless system clock domain
2013-05-07 19:09:56 +02:00
6a4c194aab
platforms: add KC705
2013-05-07 10:31:12 +02:00
3d0894465c
mibuild: Add platform for Xilinx ML605 board
2013-05-06 14:21:56 +02:00
e4b0e8ed6d
xilinx_ise: enable register balancing
2013-05-06 14:21:39 +02:00
85e06cc100
xilinx_ise: implement NoRetiming synthesis constraint
2013-04-25 14:57:45 +02:00
29eaf068f3
xilinx_ise: do not attempt to source settings file on Windows
2013-04-16 22:55:24 +02:00
31b1960188
xilinx_ise: add --no-source option to disable sourcing of ISE settings file
2013-04-16 22:39:35 +02:00
Florent Kermarrec
Robert Jordens
Sebastien Bourdeauducq
Yann Sionneau
Fabien Marteau
Sebastien Bourdeauducq
Nina Engelhardt
user
Nina Engelhardt
Brandon Hamilton