c0773ed9b9
HPC FPGA Store on AliExpress renamed itself to SITLINV
2023-01-16 11:31:35 +07:00
36a4100c8b
ocp_timecard: Add DDR3 SDRAM support.
2023-01-13 12:41:34 +01:00
1e35d78512
ocp_tap_timecard: Add initial SMAIOs peripherals to allow using SMA over PCIe DMA or also with direct (and slow) control/visualization with CSR registers.
2023-01-13 10:08:44 +01:00
fc7154a632
ocp_tap_timecard: Add Leds/I2C/PMOD/GPS/SMAs IOs.
2023-01-13 09:14:05 +01:00
a0fd3e7536
Add initial OCP-TAP TimeCard support with PCIe/SPIFlash/Leds/Buttons/DNA/XADC (Compiles but untested).
2023-01-12 18:50:23 +01:00
563ccbd8cf
Merge pull request #464 from machdyne/master
...
initial support for machdyne konfekt and noir
2023-01-01 16:12:51 +01:00
5de6865cbe
Merge pull request #463 from stone3311/master
...
terasic_deca: add SPI SD card support
2023-01-01 16:10:30 +01:00
f0dc9a6874
initial support for machdyne konfekt and noir
2022-12-30 17:00:35 +01:00
6cfb56bb07
terasic_deca: add SPI SD card support
2022-12-28 02:13:06 +01:00
57845d1ca4
Correct pinout and IOStandard
...
Correct connector pinout
Correct pinout for ETH
LED IOStandard set to LVCMOS33
BTN[0] IOStandard set to LVCMOS33
Changes are made based on Tang_primer_20K_3690 and Tang_Primer_20K-Dock_3709 schemes.
2022-12-22 18:30:36 +03:00
a92fdffb35
platforms/digilent_zybo_z7: reorder _io_x & _connectors_x, init cleanup
2022-12-12 22:17:39 +01:00
d28894a4b3
Reintroduce original Zybo + HDMI addition ( #461 )
...
* Reintroduce original Zybo support
* Reintroduce original zybo, add HDMI + fixes for Z7
2022-12-12 22:05:47 +01:00
c05ce32c8a
Merge pull request #458 from trabucayre/arty_s7_tcl_config
...
Arty z7 tcl config
2022-12-08 08:31:22 +01:00
25c40ddda7
add gpio to board
2022-12-05 21:38:56 -03:00
e71e3ab3ec
platforms,targets/digilent_arty_z7: use a dict for PS config instead of fetching file configuration
2022-12-03 16:54:39 +01:00
d0d90e9eef
Merge branch 'litex-hub:master' into master
2022-11-29 15:25:41 -03:00
926ed21f0b
fixed review remarks; added zynq7000 as a submodule for using the ps as a slave
2022-11-23 17:20:25 +01:00
570ea11744
fix(plataform.basys_3): V_sync is pin R19
...
Based in https://github.com/Digilent/digilent-xdc/blob/master/Basys-3-Master.xdc#LL129C34-L129C37
2022-11-23 09:16:50 -03:00
6f7716adbb
added config for ps7; introduced different variants for the zybo-board; fixed pins
2022-11-18 11:15:54 +01:00
6e10df234f
platforms/decklink_mini_4k: Fix data2_n pin (Thanks @rdolbeau).
2022-11-14 10:21:37 +01:00
3d8106f84d
stlv7325: fix Ethernet IO voltages
...
The IO voltages of Ethernet pins is set to 2.5V instead of 1.5V.
Fix this in the platform definition.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-11-13 17:27:23 +08:00
4ba5793822
sitlinv_stlv7325: remove unexistent COL/CRS pins
...
The COL and CRS pins of the Ethernet PHY is not connected on the board
at all, but assigned dummy positions in the platform definition, which
leads to Vivado warning when building.
Remove these pins from the platform definition.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-11-13 17:27:23 +08:00
24cd983b8c
platforms/alinx_axu2cga: adding missing psu_config at platform level
2022-11-06 21:52:00 +01:00
9960f38d95
targets: replace LiteXSoCArgumentParser by LiteXArgumentParser, remove tasks done LiteXArgumentParser
2022-11-06 11:27:47 +01:00
d7184fb043
stlv7325, a_e115fb: use the proper vendor name Sitlinv
...
The boards are in fact from a vendor called 成都赛特凌威科技有限公司,
and their English registered trademark (used on the banner of their
Taobao store) is Sitlinv, which sounds like 赛特凌威.
Use this vendor name instead of where it's bought.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-10-30 10:51:13 +08:00
6c05ddae1b
Merge pull request #438 from shawnanastasio/nexys4_part_name
...
platforms/nexys4*: Update part name
2022-10-27 12:11:07 +02:00
125569b2cb
add FPGAWars Alhambra II
2022-10-25 21:12:02 +02:00
474dcb5fb3
Merge pull request #436 from Icenowy/isx-im1283
...
Add ISX iM1283 board
2022-10-22 15:56:43 +02:00
d4b2461b5a
platforms/nexys4*: Update part name
...
Symbiflow/f4pga don't recognize the part name xc7a100t-CSG324-1, so
change it to xc7a100tcsg324-1 which works with both f4pga and Vivado.
2022-10-21 14:15:27 -05:00
377cda05a3
ti60_f225_dev_kit: Switch 1.2V banks to 1.8V to fix compilation issues with latest Efinity.
...
Will need to be investigated more.
2022-10-20 18:21:52 +02:00
745ebbbfa1
Add ISX iM1283 board
...
ISX iM1283 is a "simple eDP signal generator" which utilizes a XC7A100T
FPGA, and come with a header populated with the FPGA's JTAG.
This commit adds initial reverse engineered IOs including the DDR3 DRAM
(which cannot work reliably @ DDR3-800, so the system clock is defaultly
set to 80MHz now), two LEDs and SD slot.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-10-14 22:50:43 +08:00
23c6acd013
platforms/ti60_f225_dev_kit: Fix IO voltage conflicts between peripherals/banks.
...
Was already reported as a warning on 2021.1.165.2.19 but now an error with 2022.1.226.
Note: To get the build working with 2022.1.226 the following change had to be done to
pt/bin/writer/pinout.py, line 2254:
- table.add_rows(table_rows)
+ for table_row in table_rows:
+ table.add_row(table_row)
This would need to be investigated more to know if related to our local setup/machine.
2022-10-14 10:22:54 +02:00
3b339ba9a3
platforms/xilinx_kc705: Fix flash proxy name.
2022-10-13 08:48:33 +02:00
99888c52ce
xilinx_kc705/i2c: Add pullups.
2022-10-11 17:26:06 +02:00
3ec18c3583
Add qmtech Cyclone IV Starter Kit
2022-10-09 16:34:44 +02:00
c38b8b1d8c
MNT RKX7: update platform and target for D-2 release
2022-10-03 20:09:48 +02:00
cf416d0d66
stlv7325: Adjust DDR3 pins to match reference design
2022-10-01 11:15:47 +02:00
57eb907210
aliexpress_stlv7325: Fix missing parameter for PULLUP attribute
2022-09-25 23:13:44 +02:00
8c3a5c0608
sipeed_tang_nano_9k: Fix HDMI IOs constraints.
2022-09-23 11:18:30 +02:00
9dbee62eac
add option to use ecpprog for crosslink-nx eval board
2022-09-15 12:27:08 -07:00
3cef11e04d
platforms/newae_cw305: Add sma_clk_in/out, buttons, switches and expansion header connector.
2022-09-13 14:26:52 +02:00
f1899954e9
Add initial NewAE CW305 board support.
2022-09-13 12:38:30 +02:00
25c28d2c03
fixed issue with default programmer option
2022-09-10 18:16:04 +01:00
e8504191e3
cleanup
2022-09-10 17:54:43 +01:00
6d0a4c788e
Added DFU support to Butterstick
2022-09-10 17:45:57 +01:00
d39d87b701
sipeed_tang_primer_20k: Switch to PHYPadsReducer and enable the 2 modules.
2022-09-07 12:06:22 +02:00
1663ded641
sipeed_tang_primer_20k: Add initial DDR3 integration (WIP).
2022-09-07 11:53:24 +02:00
abd20f560b
sipeed_tang_primer: Minor cleanups (Rename standard dock to standard, reduce margin on hdmi5x).
2022-09-07 10:56:17 +02:00
4d72c75f49
platforms/sipeed_tang_primer_20k: use replace _connectors.extend by add_connector
2022-09-06 20:19:37 +02:00
74d4a72494
radiona/ulx3s: Rename user_button to user_btn (consistency with other boards) and fix ident.
2022-08-26 22:25:54 +02:00
693cce73bd
Merge pull request #417 from Igor542/master
...
radiona_ulx3s: add buttons
2022-08-26 22:24:05 +02:00
0c14bbf0dc
sipeed_tang_primer_20k: adding dock lite support
2022-08-26 08:43:57 +02:00
9ed3b7baae
radiona_ulx3s: add buttons
2022-08-25 22:19:48 -07:00
94d079f469
sipeed_tang_nano_4k: Fix tab/space.
2022-08-24 16:07:18 +02:00
feff243f8f
Merge pull request #416 from shenki/artix-dc-scm
...
Add Antmicro Artix DC-SCM board
2022-08-24 15:22:52 +02:00
6ba6a7e8fa
Merge pull request #414 from lambdaconcept/master
...
lambdaconcept_ecpix5: fix HDMI pin
2022-08-24 15:14:11 +02:00
f48ed3d9e7
Add Antmicro Artix DC-SCM board
...
Based on commits by:
- Jedrzej Boczar <jboczar@antmicro.com>
- Karol Gugala <kgugala@antmicro.com>
Tested serial and networking on a DC-SCM with mor1k and vexriscv.
2022-08-24 13:03:36 +10:00
c3e99a8419
lambdaconcept_ecpix5: fix HDMI pin
2022-08-11 18:45:10 +02:00
7487440725
Added Tang Nano 4k Support for GoWin Educational IDE v1.9.8.03
2022-08-05 13:28:22 -03:00
6872f7ade6
sipeed_tang_primer_20k: Add LCD pins (untested).
2022-08-05 09:42:38 +02:00
c79d01064e
sipeed_tang_primer_20k: Switch Serial to Dock IOs.
2022-08-05 09:07:20 +02:00
f2cb211432
sipeed_tang_primer_20k: Add buttons and prepare RGB Led.
...
Synthesis issue with WS2812/GowinEDA for now.
2022-08-04 16:32:50 +02:00
09b0c975f3
sipeed_tang_primer_20k: Add Ethernet/Etherbone (compiles but not yet working).
2022-07-26 12:53:42 +02:00
abe08a96aa
sipeed_tang_primer_20k: Add Video (Colorbars), compiles but does not seems to be working.
2022-07-26 12:25:10 +02:00
12b8063941
sipeed_tang_primer_20k: Add LedChaser through 204 pin SODIMM connector/Dock.
2022-07-26 11:44:03 +02:00
d49e43801e
sipeed_tang_primer_20k: Add 204 Pins SODIMM Connector.
...
Will allow defining Dock peripherals.
2022-07-26 11:30:39 +02:00
67ffe095cc
Merge branch 'master' of https://github.com/machdyne/litex-boards
2022-07-15 17:13:22 +02:00
22dcadcfa1
rename ld board prefix to machdyne
2022-07-15 17:13:00 +02:00
9deef65445
Merge branch 'litex-hub:master' into master
2022-07-14 16:02:00 +02:00
52ff93a194
Merge pull request #409 from antmicro/rrozak/remove-dm-pins-from-datacenter
...
Remove DM signals assignment from DDR4 Datacenter platform
2022-07-11 19:34:19 +02:00
2357212161
Remove DM signals assignment from DDR4 Datacenter platform
...
Data Masks (DM) are unsupported on x4 devices and wrong pins were assigned.
Signed-off-by: Ryszard Różak <rrozak@antmicro.com>
2022-07-11 12:29:02 +02:00
3ecec8cd16
Merge branch 'litex-hub:master' into master
2022-07-08 16:59:55 +02:00
756d019571
add support for schoko
2022-07-08 16:58:55 +02:00
6b02ea024a
ti60_f225_dev_kit: Fix ethernet build and enable debug. Now needs testing.
2022-06-28 19:54:00 +02:00
c14611b07c
ti60_f225_dev_kit: Add dummy 0 pin to connectors to use schematic numbering (1-40).
2022-06-27 19:47:19 +02:00
1ad2022138
quicklogic_quickfeather: Move from deprecated Symbiflow to F4PGA
2022-06-17 17:00:48 +02:00
29b72fac7e
taobao_a_e115fb: Minor cleanups.
2022-06-15 11:55:22 +02:00
0ae1417eb5
a_e115fb: Add taobao prefix (Similar to what we do on aliexpress's boards from unknown vendors).
2022-06-15 11:53:11 +02:00
4e0e381f47
Merge pull request #398 from Icenowy/a-e115fb
...
a_e115fb: new board
2022-06-15 11:37:36 +02:00
13fbcbb159
a_e115fb: new board
...
It's a core board with EP4CE115 by a random vendor on Taobao.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-13 23:13:29 +08:00
c420429a3c
efinix_ti60_f225: Add the 3 QSE connectors and add RGMII Ethernet QSE extension board.
2022-06-13 16:01:28 +02:00
d37af4aece
Merge pull request #395 from AEW2015/master
...
Support for "discontinued" Avnet aes-ku040-db-g development board
2022-06-07 12:13:47 +02:00
313e758ffe
Updated copywrite and renamed to avnet_aesku40
2022-06-03 20:49:52 -06:00
6e33d9249f
sipeed_tang_primer_20k: Cleanup/Fix.
2022-06-03 11:40:10 +02:00
68733c6e92
Merge pull request #396 from Icenowy/tang20k
...
sipeed_tang_primer_20k: new board
2022-06-03 10:14:55 +02:00
b97d9cd9e8
sipeed_tang_primer_20k: new board
...
Only initial support is added.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-03 00:24:20 +08:00
4d98dd38a7
Merge branch 'litex-hub:master' into master
2022-06-01 23:01:43 -06:00
1b96067113
added aesku40 dev board
2022-06-01 22:54:03 -06:00
48353735fa
Merge pull request #393 from swetland/ethernet
...
muselab icesugar pro: add ethernet/etherbone support
2022-05-20 22:10:02 +02:00
5a714167ed
muselab icesugar pro: add ethernet/etherbone support
...
- use P4 header for a waveshare ethernet phy module
- add --with-ethernet, --with-etherbone, --eth-ip, and --eth-dynamic-ip
target configuration options
2022-05-19 14:46:09 -07:00
2214c7baec
enclustra_mercury_kx2: remove useless clk100, because it is not connected to a clock pin
2022-05-20 04:42:06 +07:00
f1e021cbbe
enclustra_mercury_kx2: add clk100, leds, base board serial, DDR3 termination, DDR3 voltage setting
2022-05-19 15:41:44 +07:00
64773b4085
Merge pull request #390 from hansfbaier/hpc-xc7k420t
...
HPC Store xc7k420t
2022-05-16 11:20:15 +02:00
efa5740811
Move HDMI Support From Sipeed Tang Nano 4K.
2022-05-15 10:53:09 +08:00
26c0f546c7
Merge branch 'litex-hub:master' into hpc-xc7k420t
2022-05-14 21:40:12 +07:00
006b54e7ea
Get 3 DDR modules working with Vivado
2022-05-14 21:38:25 +07:00
ee58e5dbc7
Merge pull request #388 from swetland/hdmi
...
muselab: icesugarpro: fix HDMI output
2022-05-12 15:09:03 +02:00
f383ad3938
Support HPC Store XC7K420T board
2022-05-12 12:55:46 +07:00
d1096a2cd0
Add HPC Store XC7K420T board
2022-05-11 08:58:50 +07:00
0ce7f8354c
Add initial LimeSDR Mini V2 support (With SoC + USB3 (FT245PHYSynchronous)).
...
python3 -m litex_boards.targets.limesdr_mini_v2 --csr-csv=csr.csv --build --load
litex_server --jtag --jtag-config=openocd_limesdr_mini_v2.cfg
litex_term crossover
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2022 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on May 3 2022 18:59:46
BIOS CRC passed (5f29afcc)
LiteX git sha1: a4cc859d
--=============== SoC ==================--
CPU: VexRiscv @ 80MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128KiB
SRAM: 8KiB
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> ident
Ident: LiteX SoC on LimeSDR-Mini-V2 2022-05-03 18:59:29
2022-05-03 19:04:06 +02:00
ec220e4b5b
muselab: icesugarpro: fix HDMI output
...
- enable data_n outputs
- use drive_both property of updated VideoHDMIPHY to drive both
differential outputs
- adjust default clocking to successfully close timing
(sysclk at 50Mhz, HDMI at 25MHz, HDMIx5 at 125MHz)
2022-05-03 04:04:26 -07:00
3ebc9877ad
1bitsquared_icebreaker: Rename to icebreaker (Python does not like number as prefix for imports).
2022-05-02 13:20:40 +02:00
9914478854
xilinx_ac701: Add SPI-Flash support.
2022-04-28 11:05:51 +02:00
ae8bdb74a9
xilinx_kc705: Add SPI-Flash support.
2022-04-28 10:27:54 +02:00
68ea5fe057
platforms/colorlight_5a_75b/v7_0: Comment rst_n to avoid deadlock on reboot command.
2022-04-25 18:50:17 +02:00
39a314cdae
Rename aliexpress_u420t to aliexpress_xc7k420t.
2022-04-21 14:28:26 +02:00
06396a2cb6
Merge pull request #384 from hansfbaier/qmtech-ep4cgx150
...
add board support for QMTech EP4CGX150
2022-04-21 10:36:51 +02:00
b2a346edc8
aliexpress_u420t: Review/Simplify.
...
Specific integrated ROM/SRAM/MAIN_RAM size can be passed through command line parameters.
2022-04-21 10:32:18 +02:00
3e9e970076
Add aliexpress prefix to boards from aliexpress that seem to be from the same unknown vendor.
2022-04-21 10:06:11 +02:00
8c51cb12c8
Merge pull request #383 from sysmanalex/master
...
Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board
2022-04-21 10:02:05 +02:00
b41d72e1d0
add board support for QMTech EP4CGX150
2022-04-16 06:36:24 +07:00
23b1b15486
Add initial/minimal Pluto SDR support.
2022-04-14 12:13:03 +02:00
1e00a43fdd
board u420t kintex update v0.2
2022-04-13 00:12:59 +03:00
89570b005c
Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board
2022-04-12 22:38:14 +03:00
b99d788732
fairwaves/xtrx: Update with xtrx_julia improvements.
2022-04-12 17:42:52 +02:00
dd27a3473b
platforms: Add LambdaConcept's PCIe Screamer/M2.
2022-04-01 11:41:07 +02:00
867489d855
xilinx_zcu106: Add PCIe Gen3 X4 support.
2022-04-01 10:01:06 +02:00
299d4d66d6
efinix: ti60f225 add MIPI RX
2022-03-29 15:29:59 +02:00
13e5062793
Merge pull request #379 from chmousset/add_t8_devkit
...
[enh] added efinix t8f81 dev kit
2022-03-28 14:58:21 +02:00
e6a9f44580
Merge pull request #378 from antmicro/add-missing-peripherals
...
DDR4 datacenter: add missing peripherals
2022-03-28 14:40:22 +02:00
83d7c3fb39
Merge pull request #377 from Johnsel/arduino_mkrvidor4000
...
Board support for Arduino MKR Vidor 4000
2022-03-28 14:34:59 +02:00
7a68dcc79b
[enh] added efinix t8f81 dev kit
2022-03-26 09:52:20 +01:00
33516a40f4
antmicro_datacenter: add missing peripherals
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-25 13:49:41 +01:00
77cb866233
antmicro_datacenter: add HDMI output
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-25 10:03:07 +01:00
501c50ff79
Fixed serial port comments hinting the correct pins.
2022-03-24 08:04:47 -07:00
901942bda6
Cleanup for pushing. This commit combined with my litedram fork produces a running basic SoC + bios --=============== SoC ==================--
...
CPU:BUS:E 32-bit @ 4GiB
CSR:16-bit @ 48MT/s (CL-2 CWL-2)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 21.3MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
2022-03-24 07:39:14 -07:00
e445c9ec71
qmtech_5cefa2: make serial pins consistent with other boards
2022-03-24 18:52:28 +07:00
bcedf573e0
adi_adrv2crr: Add IO definition for the AD9545 reset line
...
We use PULLUP on it so that the AD9545 is by default held out
of reset without the user having to do anything ...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
cdb78efd3c
adi_adrv2crr: Document I2C devices attached
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
6c31f16df2
adi_adrv2crr: Fix I2C signal assignement
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
73458ae9d7
decklink_quad_hdmi_recorder: Add Serial/UART pins.
2022-03-23 11:08:51 +01:00
d399f33dda
Merge pull request #374 from smunaut/adrv2crr
...
adi_adrv2crr: Upgrade part to speedgrade 2
2022-03-23 09:09:57 +01:00
dc92584681
adi_adrv2crr: Upgrade part to speedgrade 2
...
Even though the schematic and bom call for speedgrade 1, this was only for
the prototypes.
All productions units have been updated to speedgrade 2.
See this thread:
https://ez.analog.com/fpga/f/q-a/112356/adrv9009-zu11eg-speed-grade
And the official HDL project for the board:
https://github.com/analogdevicesinc/hdl/blob/master/projects/adrv9009zu11eg/adrv2crr_fmc/system_project.tcl#L16
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-22 23:36:41 +01:00
68c23e9251
faster sdcard boot on 2.0
2022-03-22 17:54:12 +01:00
b8b0aead28
Added basic support for Arduino MKR Vidor 4000
2022-03-21 18:54:29 -07:00
3ebad7f7cc
gsd_orangecrab/butterstick: Add assert on devices.
2022-03-18 10:44:21 +01:00
9faa805ab9
alinx_ax7010: Review/Cleanup.
2022-03-17 11:31:02 +01:00
3aa1042f5f
Merge pull request #367 from ggangliu/zynq_xc7z010
...
Add ALINX AX7010 board support
2022-03-17 09:52:04 +01:00
0f82db26da
rcs_artic_term_bmc_card: Fix is -> ==.
2022-03-17 09:45:47 +01:00
0e7145b4a1
Update and rename xilinx_alinx_ax7010.py to alinx_ax7010.py
2022-03-17 11:21:42 +08:00
0745162a29
xilinx_zcu102: Review/Cleanup for consistency with others boards.
...
Also remove INTERNAL_VREF constraints that are not yet useful (required for DRAM).
2022-03-16 18:47:05 +01:00
f4a48e51d7
add xilinx_zcu102 platform
2022-03-16 15:37:02 +01:00
5365c7fce4
Rename xilinx_zynq_xc7z010.py to xilinx_alinx_ax7010.py
2022-03-15 15:50:09 +08:00
4159faf48b
Add files via upload
...
Adding zynq_xc7z010 board support
2022-03-12 12:20:54 +08:00
688377de7c
lpddr4_test_board: Fix button pin
2022-03-11 15:59:43 +01:00
3b74673a93
Merge pull request #363 from curliph/master
...
add Gowin programmer support
2022-03-08 17:26:50 +01:00
f52a915487
lambdaconcept_ecpix5: Add initial Video support at 640x480 (with Terminal/Framebuffer).
...
I2C intialization code adapted from https://github.com/ultraembedded/ecpix-5 .
Tested with:
- python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-terminal --build --load
- python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-framebuffer --build --load
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2022 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Mar 8 2022 15:34:22
BIOS CRC passed (c7fe9ecd)
Migen git sha1: ac70301
LiteX git sha1: 7ebc7625
--=============== SoC ==================--
CPU: FireV-STANDARD @ 75MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128KiB
SRAM: 8KiB
L2: 8KiB
SDRAM: 524288KiB 16-bit @ 300MT/s (CL-6 CWL-5)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
m0, b00: |01110000| delays: 02+-01
m0, b01: |00000000| delays: -
m0, b02: |00000000| delays: -
m0, b03: |00000000| delays: -
best: m0, b00 delays: 02+-01
m1, b00: |01110000| delays: 02+-01
m1, b01: |00000000| delays: -
m1, b02: |00000000| delays: -
m1, b03: |00000000| delays: -
best: m1, b00 delays: 02+-01
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 23.4MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> ident
Ident: LiteX SoC on ECPIX-5 2022-03-08 15:34:19
2022-03-08 15:40:52 +01:00
6eb906a2ca
Update sipeed_tang_nano_9k.py
...
add Gowin programmer support
2022-03-08 14:00:53 +08:00
4c9bc53a3c
add Win/powershell and WSL support
2022-03-08 13:24:56 +08:00
cadfde4d39
litex_acorn_baseboard: Add SerDes refclk and m2_tx/rx pins.
2022-03-07 18:41:53 +01:00
Hans Baier
Florent Kermarrec
inc
stone3311
jiv4ik
Gwenhael Goavec-Merou
JoyBed
Guilherme Salustiano
Guilherme Salustiano
mkuhn99
Icenowy Zheng
Chema
Shawn Anastasio
Franck Jullien
Lukas F. Hartmann
Vadzim Dambrouski
slagernate
Adam Zeloof
Igor Safonov
Joel Stanley
Pierre-Olivier Vauboin
Chandler Klüser
Machdyne
Ryszard Różak
Robert Szczepanski
AEW2015
Brian Swetland
minexo79
Alex Petrov
Alex Petrov
Charles-Henri Mousset
Alessandro Comodi
John Simons
Sylvain Munaut
Goran Mahovlic
Yonggang Liu
Joseph Faye
curliph