Florent Kermarrec
d33cf1a74c
mnt_rkx7: Cosmetic cleanups.
2023-05-05 09:48:06 +02:00
Florent Kermarrec
c05c494a82
targets/mnt_rkx7/usb_ohci: Use SoC.bus if SoC does not have a DMA bus.
2023-05-05 09:43:19 +02:00
enjoy-digital
6144966d24
Merge pull request #501 from mntmn/master
...
mnt_rkx7: RGB and USB fix, add HDMI terminal
2023-05-05 09:37:40 +02:00
enjoy-digital
9c222454cc
Merge pull request #503 from chmousset/add_colorlight_i5a-907
...
Add colorlight i5a 907
2023-05-03 09:50:26 +02:00
Gabriel Somlo
2bff2d4260
target/stlv7325-v2: tune eth phy delay
2023-05-01 09:28:03 -04:00
Charles-Henri Mousset
31c680abf8
[enh] added option for uartbone
2023-04-30 09:42:31 +02:00
Charles-Henri Mousset
874532871f
[enh] taking advantage of pins directly connected
2023-04-30 09:24:49 +02:00
Charles-Henri Mousset
1202c387bf
[init] added colorlight i5a-907 support
2023-04-30 09:24:46 +02:00
Charles-Henri Mousset
fd5511f3fd
[fix] add pmod uart in default config
2023-04-30 09:24:15 +02:00
Charles-Henri Mousset
f5dfdf9abf
[enh] added doc about JTAG and ext. board
2023-04-29 19:39:51 +02:00
Charles-Henri Mousset
322cc5d45b
[init] added colorlight i9+ based on XC7A50 FPGA
2023-04-29 18:36:35 +02:00
Gabriel Somlo
1f6e7f36a5
target/stlv7325-v2: fix typo in eth phy delay
2023-04-28 16:56:37 -04:00
Gabriel Somlo
1185ff51f1
Initial support for STLV7325 (v2) Kintex-7 board.
...
This is the 2nd (2023) version of the board sold through
https://www.aliexpress.us/item/3256801088848039.html
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-28 10:24:21 -04:00
Lukas F. Hartmann
a9e3e3c050
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2023-04-25 20:29:11 +02:00
Lukas F. Hartmann
d160a5ad5d
mnt_rkx7: swap RGB red/blue channels
2023-04-25 20:28:16 +02:00
Lukas F. Hartmann
17a5d3c130
mnt_rkx7: add HDMI terminal, default USB to true
2023-04-25 20:27:29 +02:00
offNaria
68bfb325a5
Fix Memory test failure of Alveo U250
2023-04-24 17:35:58 +09:00
enjoy-digital
9322869196
Merge pull request #495 from vietthanh85/master
...
Fix Memory initialization of Alveo U200 failed #1606
2023-04-24 08:09:25 +02:00
594rk
03913e2e15
Update terasic_de10nano.py
...
Corrected pin number
2023-04-23 22:28:00 -05:00
Do Viet Thanh
340da5393c
Fix Memory initialization of Alveo U200 failed #1606
2023-04-17 18:59:50 +07:00
Richard Tucker
2ed66317c7
efinix_xyloni_dev_kit: fix build error
2023-04-14 22:31:21 +10:00
enjoy-digital
b8cb2eaa47
Merge pull request #493 from hansfbaier/deca-ddr3
...
make DDR3 memory work on the DECA with the UniPHY
2023-04-11 15:27:02 +02:00
Hans Baier
60ac45e80c
make DDR3 memory work on the DECA with the UniPHY
2023-04-11 19:59:49 +07:00
Hans Baier
e120b77ef0
enclustra kx2/st1: fix connectors
2023-04-11 10:58:52 +07:00
Hans Baier
c7077880b9
copyright notices on enclustra
2023-04-11 10:29:52 +07:00
Hans Baier
ed947d1b55
enclustra: add baseboard ST1
2023-04-11 10:29:44 +07:00
Hans Baier
be8ee26b2c
enclustra_mercury_kx2: Add ST1 baseboard, part 1
2023-04-11 05:39:11 +07:00
Hans Baier
58679262ad
enclustra kx2: add connectors
2023-04-10 14:06:42 +07:00
enjoy-digital
a8eb0b20c1
Merge pull request #491 from hansfbaier/stlv7325-hdmi
...
STL7325: Add Video, and connectors (FMC, BTB, 2.54mm)
2023-04-07 09:06:55 +02:00
Hans Baier
52ca60c2ac
stlv7325: fix HDMI io standard
2023-04-07 09:50:04 +07:00
Hans Baier
2f13decc49
stlv7325: make VCCIO configurable
2023-04-07 09:27:03 +07:00
Hans Baier
566a753dd3
stlv7325: S7PLL is enough
2023-04-07 08:45:06 +07:00
Hans Baier
7c99f0758d
stlv7325: fix video args
2023-04-07 08:35:49 +07:00
Hans Baier
66cbd27bbf
stlv7325: fix video PHY
2023-04-07 08:25:59 +07:00
Hans Baier
abd639ba9e
stlv7325: add 2.54mm headers
2023-04-07 08:21:17 +07:00
Hans Baier
3f85e4ae62
stlv7325: add BTB connectors
2023-04-07 08:09:27 +07:00
Hans Baier
b3e44324d1
sitlinv_stlv7325: add FMC connector
2023-04-07 07:56:27 +07:00
Hans Baier
5067a2683f
sitlinv_stlv7325: add video HDMI, enable compressed bitstream
2023-04-07 07:31:42 +07:00
Hans Baier
43ce24dcb3
add QMTech 5CEFA5 Cyclone V board support
2023-04-06 18:27:51 +07:00
Florent Kermarrec
ae3d5d599b
sqrl_fk33: Remove es1 workaround now that recent version of Vivado support it non-es devices.
2023-04-04 18:11:38 +02:00
enjoy-digital
a4925d14f9
Merge pull request #488 from Icenowy/stlv7325-s7pll
...
sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
2023-04-04 08:22:16 +02:00
Gabriel Somlo
1b9a74bf08
targets/nexys-video: simplify sata configuration
...
Make nexys-video SATA configuration similar to the way it is supported
on the majority of other SATA-capable targets.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-03 12:28:12 -04:00
Icenowy Zheng
b1107e94d4
sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
...
As we do not need fine phase tweaking for the main system clock, use
S7PLL instead of S7MMCM to allow higher VCO frequency and more flexible
sys_clk_freq.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-04-03 16:45:13 +08:00
enjoy-digital
e11d40a249
Merge pull request #487 from ICE-V-Wireless/master
...
Add PMOD registrations to ICE-V Wireless
2023-04-02 11:44:02 +02:00
Michael Welling
5de47baa44
Add PMOD registrations to ICE-V Wireless
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2023-04-02 03:31:55 -05:00
Hans Baier
f564f80826
terasic_deca: hdmi i2s uses 1.8V, not 3.3V
2023-04-01 08:14:09 +07:00
Hans Baier
74c8569a5c
DDR3 RAM works on 1.5V, not 1.35V
2023-03-27 15:17:42 +07:00
Hans Baier
40c8e62b09
use bistream compression on those large devices
2023-03-21 09:25:56 +07:00
Hans Baier
0125ae4271
Add support for QMTech Artix7 200T FBG484 board
2023-03-20 08:21:36 +07:00
Hans Baier
98ddb97f5e
Support QMTech XC7A75T, XC7A100T core boards
2023-03-20 07:57:58 +07:00
Icenowy Zheng
6b8a5d35c0
sipeed_tang_nano_20k: support copackaged SDRAM
...
The copackaged SDRAM of GW2AR-18 QN88 package is 8MB size, 32bit DQ
width.
Add support for it.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-03-13 17:11:06 +08:00
Icenowy Zheng
291c43b898
sipeed_tang_nano_20k: new board
...
This board uses Gowin GW2AR series chip (which is GW2A with integrated
RAM).
Support for the integrated SDRAM on Tang Nano 20K is still TODO.
Note: currently when the SD card is enabled, block 0 could be correctly
read but block 1 will fail.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-03-13 16:45:25 +08:00
Marco
28a1aefc21
Update sipeed_tang_nano_9k.py
...
add pin info for _connectors
2023-03-09 17:57:39 +01:00
Florent Kermarrec
bf4f688164
targets/pcie: Update Xilinx S7 constraints.
2023-03-06 12:20:34 +01:00
Florent Kermarrec
1df46d1571
platforms/sipeed_tang_nano_9k: Review SPI RGB LCD addition.
2023-03-06 09:03:12 +01:00
Marco
8d35591f47
Update sipeed_tang_nano_9k.py
...
add SPI-Interface for the 1.14inch LCD
2023-03-04 15:25:59 +01:00
Florent Kermarrec
943cf2636f
platforms/sipeed_tang_primer_20k: Add checkme on leds IOstandard.
2023-03-02 12:14:04 +01:00
Florent Kermarrec
c9a0f5f50b
targets/sipeed_tang_primer_20: Ethernet/Etherbone working.
...
Test:
./sipeed_tang_primer_20k.py --cpu-type=serv --with-etherbone --build --load
ping 192.168.1.50
2023-03-02 12:02:58 +01:00
Florent Kermarrec
4a724d9d2d
targets/sipeed_tang_primer_20k/hdmi: Remove pn_swap on data lines that is no longer required.
2023-03-02 11:44:14 +01:00
Florent Kermarrec
9e73ba53ea
platforms/sipeed_tang_primer_20k: Update hdmi pins to official dock version and fix compilation.
...
Test:
./sipeed_tang_primer_20k.py --cpu-type=serv --with-video-terminal --build --load
Working.
2023-03-02 11:39:41 +01:00
Florent Kermarrec
47659835b0
platforms: Switch US/USP platforms to XilinxUS/USPPlatform.
...
We were still using Xilinx7SeriesPlatform.
2023-03-01 09:37:55 +01:00
Florent Kermarrec
8a6f0bd94f
opalkelly_xem8320: Review and update to recent LiteX changes.
2023-03-01 09:16:51 +01:00
AEW2015
e20391d366
Basic SoC for Opal Kelly XEM8320
2023-02-28 13:19:12 -07:00
Florent Kermarrec
f400179b5b
targets: Import all from litex.gen on all targets.
2023-02-23 09:09:33 +01:00
Florent Kermarrec
2eb7419678
targets/machdyne: Switch to LiteXModule for consistency with other targets.
2023-02-23 09:07:06 +01:00
inc
33cfe59614
add pullups for kopflos ethernet
2023-02-22 08:00:58 +01:00
inc
bd20b31a5c
add support for machdyne kopflos board
2023-02-21 11:18:22 +01:00
Michael Welling
b1df2c0f85
Add initial support for the ICE-V wireless
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2023-02-19 00:00:07 -06:00
Florent Kermarrec
7b716e4899
antmicro_sdi_mipi_video_converter: Cleanup/Update to new LiteX conventions.
2023-02-16 09:02:14 +01:00
enjoy-digital
fe2be83feb
Merge pull request #473 from antmicro/crosslink-nx-zephyr
...
Add support for SDI-MIPI Video Converter
2023-02-16 08:49:04 +01:00
Florent Kermarrec
857166e455
xilinx_alveo_u200: Add missing copyrights.
2023-02-16 08:45:34 +01:00
enjoy-digital
adf8b8c5df
Merge pull request #472 from vietthanh85/xilinx_alveo_u200
...
Add support for Xilinx Alveo U200
2023-02-16 08:42:21 +01:00
Antoni Pokusinski
31d718749a
Add copyrights
2023-02-15 12:37:33 +01:00
Antoni Pokusinski
70f2fd6368
Fix format
2023-02-15 12:37:33 +01:00
Antoni Pokusinski
0c774a906d
Add clk12 to platform
2023-02-15 12:37:33 +01:00
Antoni Pokusinski
01abbc0d50
Replace deprecated register_mem with add_slave
2023-02-15 12:37:33 +01:00
Antoni Pokusinski
934e031dca
Fix imports
2023-02-15 12:37:33 +01:00
Tomasz Michalak
223a69cf91
Add platform and target files for Antmicro's sdi mipi video converter board
...
Signed-off-by: Tomasz Michalak <tmichalak@antmicro.com>
2023-02-15 12:37:33 +01:00
Do Viet Thanh
ec7a5c4c0b
Correct DDR4 IO Banks of Xilinx Alveo U200
2023-02-14 06:40:12 +07:00
Florent Kermarrec
fdffeb8474
radiona_ulx4m_ld_v2: Do a first review/cleanup path.
2023-02-13 16:11:32 +01:00
Goran Mahovlic
8c9ea15d0a
Update radiona_ulx4m_ld_v2.py
2023-02-13 12:08:38 +01:00
Goran Mahovlic
404fefaab1
changing filename to radiona
2023-02-13 12:06:04 +01:00
Goran Mahovlic
99db2ae60d
Delete ulx4m_ld_v2.py
2023-02-13 11:48:51 +01:00
Goran Mahovlic
57c9cff39e
Update radiona_ulx4m_ld_v2.py
2023-02-13 11:45:48 +01:00
Goran Mahovlic
9320ae8b74
Fixing platform file
2023-02-13 11:44:59 +01:00
Goran Mahovlic
f7822b7dc7
Adding target to files
2023-02-13 11:40:43 +01:00
Goran Mahovlic
a3815efccb
Adding radiona ULX4M-LD-V2
2023-02-11 16:57:34 +01:00
MV
a354f04143
avoid undefined clocks by moving the derive*-statements to start of the additional constraints list
2023-02-09 15:58:41 +01:00
Florent Kermarrec
b8abdf1b39
targets/digilent_arty: Add arguments for XDAC and DNA.
...
Avoid specific checks for Vivado toolchain (Now handled by user for f4pga toolchain)
and fix linux-on-litex-vexriscv build.
2023-01-23 08:55:10 +01:00
Florent Kermarrec
b9874685a5
gadgetfactory_papilio_pro: Cosmetic cleanups.
2023-01-17 15:43:12 +01:00
enjoy-digital
ec4d203eb6
Merge pull request #471 from Acathla-fr/papilio
...
Target/Platform Papilio Pro added (with Arcade MegaWing)
2023-01-17 11:21:27 +01:00
enjoy-digital
801008f5ad
Merge pull request #469 from hansfbaier/hpcstore-rename
...
HPC FPGA Store on AliExpress renamed itself to SITLINV
2023-01-17 11:20:19 +01:00
Do Viet Thanh
3b36e576ba
Add support for Xilinx Alveo U200
2023-01-17 06:44:21 +07:00
Fabien
05ef1ee09e
Target/Platform Papilio Pro added (with Arcade MegaWing)
2023-01-16 13:41:24 +01:00
Florent Kermarrec
55fcb4cd47
xilinx_alveo_u2x0: Improve indentation on DRAMs.
2023-01-16 09:34:59 +01:00
Florent Kermarrec
be77f82720
platforms/xilinx_alveo_u250: Fix dram numbering.
2023-01-16 09:31:23 +01:00
Florent Kermarrec
e02f64a7db
platforms/gsd_butterstick: Fix copyright.
2023-01-16 08:41:10 +01:00
Greg Davill
59a897e2dd
gsd_butterstick: Add missing pin defs
2023-01-16 17:32:39 +10:30
Hans Baier
c0773ed9b9
HPC FPGA Store on AliExpress renamed itself to SITLINV
2023-01-16 11:31:35 +07:00
Florent Kermarrec
36a4100c8b
ocp_timecard: Add DDR3 SDRAM support.
2023-01-13 12:41:34 +01:00