2c52ce0c47
targets/sipeed_tang_mega_138k: fix SDRAM (requires Mister XSDS v3.0 extension)
2023-11-08 07:13:28 +01:00
e9f53685fe
targets/sipeed_tang_mega_138k: DDR3 support (not working)
2023-11-08 07:00:24 +01:00
bc74eeca78
targets/digilent_nexys_video: Use reset_buf on sys_clk's create_clkout to improve timings and demonstrate use.
2023-11-07 13:22:30 +01:00
c7ad9adacb
terasic_de2_115: Cosmetic cleanup.
2023-11-06 19:21:53 +01:00
d8228c2c0f
Merge pull request #544 from madprogrammer/master
...
Improve terasic_de2_115 target support
2023-11-06 19:17:54 +01:00
e23ac0251a
targets/sipeed_tang_mega_138k: HDMI support
2023-11-05 16:36:59 +01:00
8792dd8e53
target/analog_pocket: Remove debug (Will be investigated externally).
2023-10-27 15:32:36 +02:00
ce951589d1
improve terasic_de2_115 target support
2023-10-23 21:15:00 +03:00
0d560bc240
targets/siglent_sds1104xe: Review.
2023-10-23 19:25:12 +02:00
71d8b17fff
Merge pull request #543 from trabucayre/siglent_sds1104xe_etherbone
...
targets/siglent_sds1104xe: simplify etherbone by using new etherbone's params to specify hybrid mode
2023-10-23 19:20:32 +02:00
26d112b094
targets/siglent_sds1104xe: simplify etherbone by using new etherbone's params to specify hybrid mode
2023-10-23 19:07:37 +02:00
afbf9eb8c9
target/xxx: remove with-uartbone, add_uartbone and deal with case where uartbone is required inconditionnally
2023-10-23 17:43:13 +02:00
a6f3c5276e
target/xxx: remove with-jtagbone, add_jtagbone and deal with case where jtagbone is required inconditionnally
2023-10-23 17:16:57 +02:00
a4fc45bba6
targets/efinix_titanium_ti60_f225_dev_kit: adding jtagbone support (`litex_server --jtag --jtag-config openocd_titanium_ft4232.cfg`)
2023-10-18 09:11:54 +02:00
eae62a60ac
target/analog_pocket: Fix.
2023-10-17 21:40:46 +02:00
cc19078650
targets/analog_pocket: Disable debug for CI.
2023-10-17 15:23:58 +02:00
f86ba2dea0
targets/analog_pocket: Add debug code for framebuffer (wip).
2023-10-17 13:18:07 +02:00
9ae224a2a7
sipeed_tang_primer_25k: new board
2023-10-17 07:45:40 +02:00
3a75f6cf79
Merge pull request #537 from rniwase/master
...
xilinx_zcu102: Add pin definitions for DDR4 SDRAM and FMC connectors, add litedram to the target.
2023-10-14 20:14:53 +02:00
9fb388407a
targets/xilinx_zcu102: Add litedram to the target.
2023-10-14 00:00:26 +09:00
e0e8600db4
fix help text
2023-10-12 11:21:20 -04:00
ec2f9480b8
targets/analog_pocket: Fix indent on videophy/cores.
2023-10-09 11:59:32 +02:00
6386f290e9
targets/analog_pocket: Add --video-colorbars/video-terminal/video-framebuffer arguments.
2023-10-09 10:59:15 +02:00
dec25b7ce9
targets/analog_pocket: Add initial Video support.
...
From https://github.com/tpwrules/pocket_linux .
2023-10-09 10:14:00 +02:00
7359a331eb
analog_pocket: Add 1:2 (HalfRate) SDRAM support.
2023-10-06 19:25:42 +02:00
d00810c983
sds1104xe: Fix typo.
2023-10-06 19:25:22 +02:00
3d7a1dd152
analog_pocket: +x.
2023-10-02 16:20:09 +02:00
fd6aee0250
targets/sqrl_acorn: Drive pcie_clkreq_n (Thanks @myftptoyman).
2023-09-27 11:06:50 +02:00
29018a8382
Merge pull request #523 from Icenowy/tangmega138k
...
[RFC] sipeed_tang_mega_138k: new board
2023-09-26 19:12:44 +02:00
3df677cfeb
Add initial Analog Pocket platform/target with Clk/SDRAM, able to run a simple SoC with SDRAM over JTAG-UART.
...
$ ./analog_pocket.py --uart-name=jtag_uart --build --load
$ litex_term jtag --jtag-config=openocd_usb_blaster.cfg
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2023 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Sep 21 2023 08:53:57
BIOS CRC passed (1e2b3f44)
LiteX git sha1: 7d738737
--=============== SoC ==================--
CPU: VexRiscv @ 50MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128.0KiB
SRAM: 8.0KiB
L2: 8.0KiB
SDRAM: 64.0MiB 16-bit @ 50MT/s (CL-2 CWL-2)
MAIN-RAM: 64.0MiB
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 15.6MiB/s
Read speed: 22.1MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex>
2023-09-21 09:19:57 +02:00
5064c65dac
targets: Switch to openocd_usb_blaster/2.cfg.
2023-09-21 09:16:24 +02:00
b92c96b3a4
colorlight_i9plus: Cosmetic cleanups.
2023-08-30 17:22:11 +02:00
3471617878
Merge pull request #502 from chmousset/add_colorlight_i9plus
...
[init] added colorlight i9+ based on XC7A50 FPGA
2023-08-30 16:54:26 +02:00
c960e85d11
targets/efinix: Now rely in LiteX to automatically exclude Tristate IOs.
2023-08-30 09:59:23 +02:00
4bb064853d
targets/efinix: Update RGMII PHYs (IOs are now directly excluded in PHYs).
2023-08-30 08:56:20 +02:00
347b477b07
sipeed_tang_primer_20k: Fix DDR3 module, SoC reset and remove DDR3 debug code.
...
Now passing memtest with valid reported memory size:
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2023 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS CRC passed (d32a9529)
LiteX git sha1: 85dadb82
--=============== SoC ==================--
CPU: VexRiscv SMP-LINUX @ 48MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 64.0KiB
SRAM: 6.0KiB
L2: 512B
SDRAM: 128.0MiB 16-bit @ 192MT/s (CL-6 CWL-5)
MAIN-RAM: 128.0MiB
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
m0, b00: |00000000| delays: -
m0, b01: |00000000| delays: -
m0, b02: |01100000| delays: 01+-00
m0, b03: |00000000| delays: -
best: m0, b02 delays: 01+-00
m1, b00: |00000000| delays: -
m1, b01: |00000000| delays: -
m1, b02: |01100000| delays: 01+-00
m1, b03: |00000000| delays: -
best: m1, b02 delays: 01+-00
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 11.7MiB/s
Read speed: 17.4MiB/s
2023-08-29 16:50:17 +02:00
4862d0667c
Merge pull request #515 from josuah/crosslink_nx_openocd
...
Allow use of OpenOCD for the Crosslink-NX
2023-08-28 16:35:20 +02:00
232e829b8f
Merge branch 'master' into crosslink_nx_main_ram
2023-08-28 16:34:27 +02:00
a9ecbffe8f
Merge pull request #520 from josuah/crosslink_nx_prog_flash
...
targets/lattice_crosslink_nx_evn: fix arguments in flash programming
2023-08-28 16:33:23 +02:00
2c3d77b5be
Merge branch 'master' into crosslink_nx_spi_flash
2023-08-28 16:32:37 +02:00
a5a6a313cc
targets/lattice_crosslink_nx_evn: add main_ram section for firmware
...
This takes the values from the Antmicro SDI MIPI converter as a model
and is enough to run a Zephyr hello world, but not seemingly enough for
a the Zephyr Shell sample.
Related: https://github.com/litex-hub/zephyr-on-litex-vexriscv/pull/13
2023-08-18 19:56:58 +02:00
ebfb9b8e01
sipeed_tang_mega_138k: new board
...
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-08-15 16:33:13 +08:00
2e5c6eb7a7
platforms/crosslink_nx_evn: add SPI flash support
2023-08-11 16:46:52 +02:00
1a46bcce5e
targets/lattice_crosslink_nx_evn: fix arguments in flash programming
2023-08-10 14:39:01 +02:00
3c0b6956cc
platforms/crosslink_nx_evn: Fix 5412d0e always disabling uartbone
...
Also fix a warning about register_mem being deprecated, taking
inspiration from platforms/crosslink_nx_vip
2023-08-09 18:07:13 +02:00
8172a304b3
platforms/crosslink_nx_evn: allow use of OpenOCD
2023-08-08 23:25:41 +02:00
3903cdee92
Merge pull request #517 from bayi/master
...
Digilent CMOD A7 ISSIRAM fix
2023-08-08 19:29:32 +02:00
4362cb23a1
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:32 +02:00
a6b025f7f3
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:15 +02:00
5412d0e0e9
platforms/crosslink_nx_evn: allow use of UARTBone
...
This goes along a small resistor jumper modification and firmware flashing like
it is for the ECP5 board. A warning message is added as the default serial might
be affected (--serial serial by default). The FTDI modification software used
for the ECP5 seems to be requried and matching.
This can be tested this way:
targets/lattice_crosslink_nx_evn.py --csr-csv=csr.csv --toolchain=oxide --programmer=openocd --uart-name crossover+uartbone --build --load
litex_server --uart --uart-port /dev/ttyUSB1
litex_cli --regs
2023-08-04 20:47:32 +02:00
efc15a91a9
global: Use new WaitTimer integrated cast to int.
2023-08-01 14:56:35 +02:00
cbcf6df26f
lattice_ecp5_evn: add_jtagbone flag
...
This follows https://github.com/enjoy-digital/litex/pull/1087 which
allows using the built-in JTAG for both the FPGA programming and the
internal core of the FPGA.
2023-07-31 13:53:24 +02:00
2d3b81a532
efinix_trion_t120_bga576: Add Ethernet through RGMII PMOD and switch to it.
...
See https://github.com/enjoy-digital/liteeth/issues/66#issuecomment-859366899 for the PMOD.
2023-07-27 11:52:40 +02:00
c1088befe5
targets/CRG: Add rst signal when missing.
...
Allow properly reseting the PLL from the SoC.
2023-07-26 16:56:27 +02:00
ce121663ff
targets/uartbone: Update with LiteX change.
2023-07-20 15:42:47 +02:00
18a3909a9c
global: Switch to litex.gen.genlib.misc.
2023-07-06 22:11:45 +02:00
67be3ab677
targets: +x on alchitry_cu and vcu128.
2023-07-06 13:29:35 +02:00
e9335cd67a
Fix pins in Alchitry Cu platform, add target for Alchitry Cu
2023-06-27 21:35:55 +05:30
58805f037c
avnet_aesku40: Expose ethernet/etherbone parameters.
...
To be able to test more easily usrgmii build.
2023-06-13 09:26:07 +02:00
4705a0274e
Support SPI Flash in Colorlight 5A-75x
2023-06-09 13:43:34 -04:00
765ee1a3ce
sitlinv_stlv7325_v2: VCCIO jumper default factory setting is 3.3V
2023-06-07 10:12:55 +07:00
8a263c18f2
sitlinv_stlv7325: Rename to v1 and update VCCIO to fix --with-pcie generation.
2023-05-30 10:39:20 +02:00
2ae2dfa6a3
Add vcu128 target ( #497 )
...
Add initial VCU128 support.
2023-05-25 22:25:44 +02:00
e59d75f593
qmtech_xc7k325t: Fix build/CI.
2023-05-12 12:19:16 +02:00
ca6b607255
targets/qmtech: Add missing +x.
2023-05-12 12:09:20 +02:00
550bc0eee5
add QMTech XC7K325T board, add seven segment display to daughterboard
2023-05-08 11:51:51 +07:00
187080228c
add qmtech_xc7l325t
2023-05-08 05:17:35 +07:00
d33cf1a74c
mnt_rkx7: Cosmetic cleanups.
2023-05-05 09:48:06 +02:00
c05c494a82
targets/mnt_rkx7/usb_ohci: Use SoC.bus if SoC does not have a DMA bus.
2023-05-05 09:43:19 +02:00
6144966d24
Merge pull request #501 from mntmn/master
...
mnt_rkx7: RGB and USB fix, add HDMI terminal
2023-05-05 09:37:40 +02:00
9c222454cc
Merge pull request #503 from chmousset/add_colorlight_i5a-907
...
Add colorlight i5a 907
2023-05-03 09:50:26 +02:00
2bff2d4260
target/stlv7325-v2: tune eth phy delay
2023-05-01 09:28:03 -04:00
31c680abf8
[enh] added option for uartbone
2023-04-30 09:42:31 +02:00
874532871f
[enh] taking advantage of pins directly connected
2023-04-30 09:24:49 +02:00
1202c387bf
[init] added colorlight i5a-907 support
2023-04-30 09:24:46 +02:00
fd5511f3fd
[fix] add pmod uart in default config
2023-04-30 09:24:15 +02:00
f5dfdf9abf
[enh] added doc about JTAG and ext. board
2023-04-29 19:39:51 +02:00
322cc5d45b
[init] added colorlight i9+ based on XC7A50 FPGA
2023-04-29 18:36:35 +02:00
1f6e7f36a5
target/stlv7325-v2: fix typo in eth phy delay
2023-04-28 16:56:37 -04:00
1185ff51f1
Initial support for STLV7325 (v2) Kintex-7 board.
...
This is the 2nd (2023) version of the board sold through
https://www.aliexpress.us/item/3256801088848039.html
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-28 10:24:21 -04:00
a9e3e3c050
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2023-04-25 20:29:11 +02:00
17a5d3c130
mnt_rkx7: add HDMI terminal, default USB to true
2023-04-25 20:27:29 +02:00
68bfb325a5
Fix Memory test failure of Alveo U250
2023-04-24 17:35:58 +09:00
340da5393c
Fix Memory initialization of Alveo U200 failed #1606
2023-04-17 18:59:50 +07:00
2ed66317c7
efinix_xyloni_dev_kit: fix build error
2023-04-14 22:31:21 +10:00
c7077880b9
copyright notices on enclustra
2023-04-11 10:29:52 +07:00
ed947d1b55
enclustra: add baseboard ST1
2023-04-11 10:29:44 +07:00
a8eb0b20c1
Merge pull request #491 from hansfbaier/stlv7325-hdmi
...
STL7325: Add Video, and connectors (FMC, BTB, 2.54mm)
2023-04-07 09:06:55 +02:00
2f13decc49
stlv7325: make VCCIO configurable
2023-04-07 09:27:03 +07:00
566a753dd3
stlv7325: S7PLL is enough
2023-04-07 08:45:06 +07:00
7c99f0758d
stlv7325: fix video args
2023-04-07 08:35:49 +07:00
66cbd27bbf
stlv7325: fix video PHY
2023-04-07 08:25:59 +07:00
5067a2683f
sitlinv_stlv7325: add video HDMI, enable compressed bitstream
2023-04-07 07:31:42 +07:00
43ce24dcb3
add QMTech 5CEFA5 Cyclone V board support
2023-04-06 18:27:51 +07:00
a4925d14f9
Merge pull request #488 from Icenowy/stlv7325-s7pll
...
sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
2023-04-04 08:22:16 +02:00
1b9a74bf08
targets/nexys-video: simplify sata configuration
...
Make nexys-video SATA configuration similar to the way it is supported
on the majority of other SATA-capable targets.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-03 12:28:12 -04:00
b1107e94d4
sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
...
As we do not need fine phase tweaking for the main system clock, use
S7PLL instead of S7MMCM to allow higher VCO frequency and more flexible
sys_clk_freq.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-04-03 16:45:13 +08:00
0125ae4271
Add support for QMTech Artix7 200T FBG484 board
2023-03-20 08:21:36 +07:00
98ddb97f5e
Support QMTech XC7A75T, XC7A100T core boards
2023-03-20 07:57:58 +07:00
6b8a5d35c0
sipeed_tang_nano_20k: support copackaged SDRAM
...
The copackaged SDRAM of GW2AR-18 QN88 package is 8MB size, 32bit DQ
width.
Add support for it.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-03-13 17:11:06 +08:00
Gwenhael Goavec-Merou
Florent Kermarrec
Sergey Anufrienko
Gwenhael Goavec-Merou
rniwase
darryln
Josuah Demangeon
Icenowy Zheng
Bayi
Mark1626
Ilya Ostrovskiy
Hans Baier
Chen
Gabriel Somlo
Charles-Henri Mousset
Lukas F. Hartmann
offNaria
Do Viet Thanh
Richard Tucker