Dolu1990
0f8b8defb4
efinix ti375 c529 dev kit bios OK
2024-08-26 11:29:27 +02:00
Gwenhael Goavec-Merou
b1a6da84b3
sipeed_tang_primer_25k: add SDRAM support (j3 connector), allows user to select between mister and sipeed SDRAM module
2024-08-04 12:14:56 +02:00
Gwenhael Goavec-Merou
2fa838b79d
sipeed_tang_mega_138k_pro: added SDRAM sipeed variant, allows user to select between mister and sipeed SDRAM module, fix sipeed SDRAM memory module
2024-08-04 12:13:47 +02:00
Gwenhael Goavec-Merou
938bf8b3a6
targets/lattice_certuspro_nx_xx,targets/lattice_crosslink_nx_xxx: pass platform to NXOSCA CTOR
2024-07-22 15:18:27 +02:00
Florent Kermarrec
5d4ebeb09c
targets: Add initial Enclustra Mercury+ XU8/PE3 target with DRAM and PCIe.
2024-07-22 11:40:19 +02:00
Florent Kermarrec
8f8e0bd228
targets/enclustra: Add Enclustra to identifier.
2024-07-22 11:38:22 +02:00
Florent Kermarrec
f844d06da2
targets/litex_acorn_baseboard_mini: Add detect_ftdi_chip method since newer batch of baseboard is mounted with FTDI ft4232 chips.
...
FT2232 and FT4232 chips are footprint compatible but still need to be handled differently from software.
2024-07-19 15:43:25 +02:00
Florent Kermarrec
88ab3eca6f
targets: Map SPRAM to SRAM when use as SRAM.
2024-07-17 11:01:34 +02:00
Florent Kermarrec
15c6f89b1a
#570 : Update CAN support with LiteX https://github.com/enjoy-digital/litex/pull/2007 .
2024-07-05 10:26:28 +02:00
enjoy-digital
2e120bf8a4
Merge pull request #570 from disdi/master
...
Add support for CTUCAN for Arty & Genesys2 board
2024-07-05 09:21:09 +02:00
Gwenhael Goavec-Merou
ac427feb0a
targets/lattice_certuspro_nx_vvml,lattice_certuspro_nx_evn: switch sys_clk to NXPLL
2024-07-03 12:36:28 +02:00
Florent Kermarrec
9898672744
siglent_sdr1104xe: Update IP/MAC addresses.
2024-07-02 17:09:23 +02:00
Gwenhael Goavec-Merou
1c06988d80
platforms,targets/lattice_certuspro_nx_evn,lattice_certuspro_nx_vvml: set sysconfig SPI_MASTER mode by default at platform level
2024-07-01 11:07:25 +02:00
enjoy-digital
40204ac815
Merge pull request #595 from trabucayre/lattice_certusnxpro
...
Lattice certusnxpro
2024-06-28 13:26:47 +02:00
enjoy-digital
5813df9b44
Merge pull request #591 from VOGL-electronic/efinix_trion_t20_pulse_reset
...
targets: efinix_trion_t20_bga256_dev_kit: add pulse for reset
2024-06-28 13:24:29 +02:00
Gwenhael Goavec-Merou
8579af5710
lattice_certuspro_nx_vvml: new board support
2024-06-28 12:47:57 +02:00
Gwenhael Goavec-Merou
f27bbc9645
lattice_certuspro_nx_evn: new board support
2024-06-28 12:47:16 +02:00
Florent Kermarrec
4f8540d53e
targets/litex_acorn_baseboard_mini: Switch to _litex_acorn_baseboard_mini_io.
2024-06-27 14:23:43 +02:00
Fin Maaß
c205bb756b
targets: efinix_trion_t20_bga256_dev_kit: add pulse for reset
...
to do a reset on the trion t20 a pulse is needed.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
2024-06-24 09:14:55 +02:00
inc
cb43cdf6f9
targets/machdyne_vanille: set uart_name to stub
2024-06-22 12:13:30 +02:00
inc
a1df389c7e
machdyne: switch to LiteXArgumentParser; add mozart ml2+mx1 and vivaldi ml1
2024-06-22 11:26:43 +02:00
inc
34e85c5cf6
machdyne: fix typos; add vanille and lakritz
2024-06-22 09:26:42 +02:00
enjoy-digital
95f5e030e5
Merge pull request #590 from trabucayre/zynq_csr_master_bus
...
ZynqXXX boards: remove CSR definition and GP0 connection to CPU
2024-06-19 08:48:33 +02:00
Florent Kermarrec
dad6b2b9b6
efinix_trion_t20_bga256_dev_kit: Cleanup/Review platform/target.
2024-06-19 08:23:54 +02:00
enjoy-digital
8eaa4d637e
Merge pull request #589 from VOGL-electronic/sdram_efinix_trion_t20
...
efinix_trion_t20: add sdram
2024-06-19 08:18:19 +02:00
Gwenhael Goavec-Merou
70fb3de96c
targets: All boards based on Zynq7000: remove csr definition and GP0 connection to the SoC: now handled by zynq700 core CPU
2024-06-19 07:59:24 +02:00
Gwenhael Goavec-Merou
efd6c8b0aa
targets/alinx_axu2cga,xilinx_zcu216,xilinx_kv260: remove csr definition and GP0 connection to the SoC: now handled by znqmp core CPU
2024-06-19 07:54:50 +02:00
Florent Kermarrec
07881259a5
litex_acorn_baseboard_mini: Assert cleanups.
2024-06-18 17:41:01 +02:00
Florent Kermarrec
6857418deb
litex_acorn_baseboard_mini: Allow simultaneous pcie and ethernet.
2024-06-18 13:56:08 +02:00
Florent Kermarrec
805a520b5a
litex_acorn_baseboard_mini: Fix and test PCIe Gen2 X1 with it.
2024-06-18 09:14:08 +02:00
Gwenhael Goavec-Merou
27b99d4169
targets/lambdaconcept_ecpix5.py: allows configuring eth_ip/remote_ip/dynamic
2024-06-14 15:58:25 +02:00
Gwenhael Goavec-Merou
635e932084
targets/lambdaconcept_ecpix5.py: added argument to select version (r02 by default)
2024-06-14 15:57:11 +02:00
Florent Kermarrec
1b22061e93
litex_acorn_baseboard_mini: Add PCIe support (Not yet buildable with Ethernet or SATA due to GTPE2_COMMON sharing).
2024-06-13 17:46:16 +02:00
Fin Maaß
2cd89cdd16
efinix_trion_t20: add sdram
...
add sdram of the efinix trion t20 bga256 dev kit.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
2024-06-13 12:16:09 +02:00
Florent Kermarrec
ed6ff8f4fe
targets: Switch to LiteX byte size definitions.
2024-06-13 10:04:19 +02:00
enjoy-digital
1013a53240
Merge pull request #587 from akioolin/master
...
Add HSEDA XC7A35T board support
2024-06-11 18:50:06 +02:00
Gwenhael Goavec-Merou
8bb3caee5f
targets/quicklogic_quickfeather: updated qlal4s3b_cell_macro Clock and Reset signals (similar fix to #1797 )
2024-05-30 08:37:14 +02:00
Akio
3c181106b8
Add HSEDA XC7A35T board support
...
Add HSEDA XC7A35T board support
2024-05-21 21:00:27 +08:00
enjoy-digital
7cfc622353
Merge pull request #583 from hansfbaier/alientex_davincipro
...
alientek davincipro: fix speedgrade
2024-04-23 15:54:33 +02:00
Florent Kermarrec
a6b8457111
target/efinix_ti60_f225: Add L2 Cache (16KB for now) to improve perfs/Coremark.
2024-04-23 11:45:07 +02:00
Florent Kermarrec
e4a15f6064
targets/alinx_axau15: Remove unwanted add_sdcard() call.
2024-04-23 11:40:01 +02:00
Hans Baier
e0e2bf8f97
add Alientek DaVinci Pro FPGA board
2024-04-22 14:44:53 +07:00
Hans Baier
110c051779
add Alientek DaVinci Pro FPGA board
2024-04-22 13:46:39 +07:00
Florent Kermarrec
aaab2dcfe2
alinx_axau15: Add PCIe speed support (Gen3 or Gen4) and add SDCard parameter.
2024-04-19 14:35:13 +02:00
Florent Kermarrec
3dc2fb9c0d
ti60_f225_dev_kit: Remove Ethernet/Etherbone debug that is no longer useful.
2024-04-12 12:21:36 +02:00
Gwenhael Goavec-Merou
fad45b45c1
targets/limesdr_mini_v2.py: allows using jtag_uart and added a note to load a demo firmware with litex_term + jtag_uart
2024-04-11 15:12:17 +02:00
Gwenhael Goavec-Merou
62b5b58aec
platforms,targets/xilinx_zc706: added choice between vivado(default) and openFPGALoader, re-enable DDR
2024-04-08 20:38:09 +02:00
enjoy-digital
d2d38794f4
Merge pull request #579 from hansfbaier/qmtech-altera-sdram-attrs
...
Better Altera SDRAM IO properties for more speed
2024-04-04 10:56:37 +02:00
enjoy-digital
44ab802ae6
Merge pull request #577 from hansfbaier/qmtech-ddr3-fix
...
qmtech_artix7_fgg676/fbg484: fix wrong memory chip type
2024-04-04 10:55:06 +02:00
Florent Kermarrec
bce119e0c3
litex_acorn_baseboard_mini: Proper fix to allow simultaneous Ethernet and SATA.
...
Tested successfully with ./litex_acorn_baseboard_mini.py --with-etherbone --with-sata --build --load.
-> Able to ping 192.168.1.50
-> Able to initialize SATA:
litex> sata_init
Initialize SATA...
Model: WDC WDS120G1G0A-00SS50
Capacity: 120GB
Successful.
2024-04-04 10:52:56 +02:00
Florent Kermarrec
d24e69c112
litex_acorn_baseboard_mini: Try to share QPLL to allow enabling SATA and Ethernet/Etherbone simultaneously.
2024-04-03 12:04:36 +02:00
Florent Kermarrec
934002e7e6
targets/alinx_axau15: Avoid USPHBMPCIEPHY workaround.
2024-04-02 12:46:11 +02:00
Florent Kermarrec
e4c4391a9c
colorlight_i9plus: Switch to OpenFPGALoader for loading bitstreams.
2024-04-02 08:44:25 +02:00
Hans Baier
7d89aa0fe9
qmtech altera boards: sdram io properties for more speed
2024-03-30 20:43:41 +07:00
Gwenhael Goavec-Merou
2392473b89
targets/xilinx_zc706: typo ZCU -> ZC
2024-03-30 11:54:28 +01:00
Gwenhael Goavec-Merou
a72f2a2e68
targets/xilinx_zc706: typo...
2024-03-29 07:18:19 +01:00
Gwenhael Goavec-Merou
27dce96bf8
targets/xilinx_zc706: SFP/etherbone working: added a note to use it
2024-03-29 07:16:53 +01:00
Gwenhael Goavec-Merou
917ae33351
targets/xilinx_zc706: temporary disabled ddr3
2024-03-29 07:11:06 +01:00
Hans Baier
5629f9e97a
qmtech_artix7_fgg676: fix wrong memory chip type
2024-03-29 08:41:19 +07:00
Florent Kermarrec
2505aeb9b4
qmtech_wukong: Switch to direct instance of LiteEthPHYGMII since hybrid MII/GMII does not seems to work correctly.
2024-03-28 16:02:55 +01:00
Florent Kermarrec
b6b3226192
qmtech_wukong: Add --remote-ip argument.
2024-03-28 15:50:54 +01:00
Florent Kermarrec
4ca13943eb
qmtech_wukong: Change --board-version to --revision as on other boards.
2024-03-28 15:30:57 +01:00
Florent Kermarrec
4df2ab98e7
qmtech_wukong: Add V3 support and minor cleanups.
2024-03-28 15:23:58 +01:00
Florent Kermarrec
9235468ce1
qmtech_wukong: Minor cleanups.
2024-03-28 14:50:03 +01:00
Florent Kermarrec
57a9970257
xilinx_zc706: ADD DDR3 support in target and update/fix IOs definition in platform (Untested on hardware).
...
- Use/Mimic IO standards from KC705.
- Keep it to single rank for now (but add dual rank IOs in comments).
- Add DCI cascade property.
- Add sys4x and idelay clocking.
- Add LiteDRAM PHY/Core support.
2024-03-27 08:51:30 +01:00
Florent Kermarrec
ded90748ee
xilinx_kc705: Minor Cleanup/Update.
2024-03-27 08:48:05 +01:00
Florent Kermarrec
40c7a63e53
Finish tang_mega_138k renaming to tang_mega_138k_pro.
2024-03-26 21:58:02 +01:00
enjoy-digital
d5038dec61
Merge pull request #572 from AlanCui4080/master
...
Rename sipeed_tang_mega_138k.py to sipeed_tang_mega_138k_pro.py
2024-03-26 21:55:11 +01:00
Florent Kermarrec
8a5b83125b
xilinx_zc706: Add Ethernet/Etherbone support through SFP/K7_1000BaseX (Untested on hardware).
2024-03-26 21:53:45 +01:00
Florent Kermarrec
a29532b5d7
xilinx_zc706: Add PCIe Gen2 X4 support (Untested on hardware).
2024-03-26 21:41:41 +01:00
Florent Kermarrec
fdd4edbd1a
xilinx_zc706: Review/Minor changes.
2024-03-26 21:35:10 +01:00
Gwenhael Goavec-Merou
6b35c47e8b
xilinx_zc706: new Xilinx/AMD Zynq7000 based board
2024-03-26 20:49:54 +01:00
Florent Kermarrec
1655cbf62f
alinx_axau15: Add manual loc constraints on PCIe GTHE4 channels to avoid Vivado to remap them.
...
Board now correctly seen with lspci.
2024-03-26 14:12:26 +01:00
Florent Kermarrec
cc7f092520
alinx_axau15: Fix PCIe support compilation (still needs proper instance name).
...
Not yet working on hardware.
2024-03-25 19:11:33 +01:00
Florent Kermarrec
191a5bb17a
alinx_axau15: Add RGMII Ethernet/Etherbone support.
2024-03-25 16:08:38 +01:00
Gwenhael Goavec-Merou
11bf6ea703
targets/siglent_sds1104xe.py: added note on how to use crossover with jtagbone
2024-03-20 16:58:38 +01:00
AlanCui
abaa6b9a90
Rename sipeed_tang_mega_138k.py to sipeed_tang_mega_138k_pro.py
2024-03-19 17:21:21 +08:00
Florent Kermarrec
f50ee97520
alinx_axau15: Minor adjustments.
2024-03-14 15:13:59 +01:00
Saket Sinha
93ba4aba6e
Add support for CTUCAN for Genesys2 board
2024-03-13 06:51:48 +01:00
Florent Kermarrec
e980798437
gsd_orangecrab: Add --without_dfu_rst argument to allow disabling reset to DFU on Button press.
...
This is useful in some case where were button input is force through hardware change to force DFU to be in reset at startup.
2024-03-11 17:23:42 +01:00
Florent Kermarrec
91aff9816d
targets/litex_acorn_baseboard_mini: Add with_dram parameter to allow build without DRAM.
2024-03-07 18:30:18 +01:00
Saket Sinha
232ccb3214
Add support for CTUCAN for Arty board
2024-03-05 11:53:54 +01:00
enjoy-digital
8ce88ee51e
Merge pull request #569 from trabucayre/olimex_gatemate_a1_evb
...
Olimex gatemate a1 evb
2024-03-05 09:38:03 +01:00
Florent Kermarrec
0b5727692f
litex_acorn_baseboard_mini: Fix imports.
2024-03-04 13:22:41 +01:00
Gwenhael Goavec-Merou
e1e989acac
Olimex GateMate A1 EVB: new Board
2024-03-02 12:23:27 +01:00
Florent Kermarrec
8b80cc1c3a
litex_acorn_baseboard_mini: Add SATA support (Gen1 and Gen2).
2024-02-29 14:36:51 +01:00
enjoy-digital
9dd246c26e
Merge pull request #567 from trabucayre/gatemate_evb
...
adding colognechip_gatemate_evb
2024-02-28 17:35:48 +01:00
enjoy-digital
fab6bcf514
Merge pull request #566 from hansfbaier/qmteck-k325-fix
...
Qmtech k325: fix wrong button assignment
2024-02-28 17:35:04 +01:00
Gwenhael Goavec-Merou
af09c81db6
adding colognechip_gatemate_evb
2024-02-28 17:27:21 +01:00
Hans Baier
82c0e191a7
QMTech XC7K325T: use the buttons on the core board
2024-02-28 04:40:17 +07:00
Florent Kermarrec
33a0975dd7
litex_acorn_baseboard_mini: Allow configurable sys_clk_freq with Ethernet/Etherbone.
2024-02-27 12:38:08 +01:00
Florent Kermarrec
7bc03e5fbc
targets/litex_acorn_baseboard_mini: Make it similar to other targets and keep SoC + UART + DRAM + Ethernet.
2024-02-26 17:29:09 +01:00
Florent Kermarrec
aa34acc426
targets/digilent_arty: Allow --with-ethernet and --with-etherbone and remove --with-hybrid.
2024-02-26 15:56:58 +01:00
Florent Kermarrec
feae57e7fb
target/qmtech_kintex7_devboard: +X.
2024-02-26 15:41:09 +01:00
Florent Kermarrec
23313de1b4
targets: Add initial litex_acorn_baseboard_mini target from acorn_baseboard repository.
2024-02-26 12:25:15 +01:00
Florent Kermarrec
6d07eda3c0
targets/digilent_arty: Fix indent on with_usb.
2024-02-21 10:06:49 +01:00
Florent Kermarrec
68e0453677
targets/digilent_arty: Move USB integrated to BaseSoC.
2024-02-21 09:03:53 +01:00
Florent Kermarrec
8242ab3974
targets/digilent_arty: Add Ethernet/Etherbone Hybrid mode + USB-Host (through Machyne PMOD).
2024-02-20 19:44:10 +01:00
enjoy-digital
f7c7a5a7e5
Merge pull request #563 from smunaut/adi
...
Some minor updates to the ADI ADRV2CRR board
2024-02-06 16:33:53 +01:00
enjoy-digital
a6f8f0e696
Merge pull request #561 from ruurdk/qmtech
...
Add support for QMTech Kintex 7 Development board
2024-02-06 16:29:54 +01:00
