028d4a78aa
targets: use default integrated rom/ram size passed with **kwargs from default soc_core_args
2020-01-13 15:20:37 +01:00
13e5ca03a5
ADD: KX2 and DDR3 support
2020-01-13 14:21:54 +01:00
beccf670e5
hadbadge: fix _CRG
2020-01-11 10:46:23 +01:00
15f3457aea
platforms/de0nano/serial: add gpio names in comment
2020-01-10 18:53:52 +01:00
94ba343daf
targets/ac701: cpu_reset is active high
2020-01-10 18:53:14 +01:00
ab01f70e5c
platforms/ac701: set internal vref to 0.750v on DDR3 banks, use IN_TERM=UNTUNED_SPLIT_50 on dq
2020-01-09 21:56:01 +01:00
7afe3dc674
platforms/targets: sync with litex
2020-01-09 21:10:59 +01:00
4192b20f09
targets: cleanup Altera CRGs
2020-01-09 19:46:39 +01:00
9e9fc5ef78
platforms: always use 1e9/clk_freq for default_clk_period
2020-01-09 19:28:50 +01:00
fe23881348
Merge pull request #33 from msloniewski/master
...
targets/de10lite: use external clock for sys directly
2020-01-09 19:23:55 +01:00
aaf8d54c6a
targets/de10lite: use AsyncResetSynchronizer for clock domains
...
At the start output of the pll is not stabilized, which
caused malfunctions when used for sys clock domain.
Use AsyncResetSynchronizer to start clock domains
on pll locked signal.
2020-01-09 18:47:13 +01:00
d08dfdb808
platforms/nexys4ddr: add sdcard pins (sync w. litex commit #e99740e8)
2020-01-09 09:25:19 -05:00
babbc676eb
targets: cleanup ECP5 CRGs
2020-01-09 14:24:18 +01:00
82601ff700
hadbadge: remove speed_grade workaround, now passed to trellis from device.
2020-01-08 19:44:35 +01:00
1f300bb03e
add initial camlink_4k support
2020-01-08 09:56:37 +01:00
c0e4578bea
targets/hadbadge: cleanup/simplify (keep things similar to ulx3s) and add copyrights
2020-01-07 10:29:58 +01:00
85c4f76eba
platform/hadbadge: cleanup/simplify and add copyrights
2020-01-07 10:29:01 +01:00
829898d652
Merge pull request #31 from pdp7/master
...
add the Hackaday Supercon ECP5 badge
2020-01-07 09:48:15 +01:00
ab41cf5b79
Update ecp5_evn.py
2020-01-07 01:55:59 +01:00
b3f175c064
add the Hackaday Supercon ECP5 badge
...
Add the Hackaday Supercon 2019 badge which has an ECP5 FPGA:
https://hackaday.io/project/167255-2019-hackaday-superconference-badge
These changes are from Michael Welling's fork:
https://github.com/mwelling/linux-on-litex-vexriscv
During Supercon, we trying two approaches:
- use the built-in 16MB QSPI SRAM
- use add-on cartiridge with 32MB SDRAM by Jacob Creedon
We were not able to get the QSPI SRAM working so I've removed
those changes, and I have just added the changes that are needed
to boot Linux with the 32MB SDRAM.
Thanks to Jacob Creedon, Greg Davill and Tim Ansell who helped debug.
KiCad design files for the SDRAM cartridge are available at:
https://github.com/jcreedon/dram-cart/
The SDRAM cartridge PCB is shared at:
https://oshpark.com/shared_projects/IQSl2lid
More information in this blog post:
https://blog.oshpark.com/2019/12/20/
The Hackaday Supercon badge PCB design is here:
https://github.com/Spritetm/hadbadge2019_pcb
2020-01-06 16:59:15 +01:00
f8f2301a3e
Merge pull request #30 from mithro/fomu-update
...
Updating the templates for Fomu.
2020-01-03 08:40:18 +00:00
250706b98c
Updating the templates for Fomu.
2020-01-02 13:55:09 +00:00
2b43a18a3c
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:18:56 +01:00
c96e7c8fb9
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:07:18 +01:00
2259042383
pipistrello: add copyrights
2019-12-31 17:44:24 +01:00
6324433e1c
Merge pull request #28 from zakgi/master
...
Adding initial support for Saanlima's Pipistrello LX45 board
2019-12-31 17:33:25 +01:00
980b0ebda0
targets/de10lite: rename VideoSoC to VGASoC (to avoid confusion with VideoSoC as used on Video designs with framebuffer)
2019-12-31 17:30:23 +01:00
10e5248bda
targets/de10lite: minor cleanup on import/_CRG
2019-12-31 17:26:09 +01:00
9c5a4f757f
targets/de10lite: add VideoSoC with VGA peripheral
...
Add VideoSoC build option, based on Frank Buss example.
2019-12-30 23:25:43 +01:00
cace17e162
targets/de10lite: refactor setting up clock domains
...
Use PLL to generate clock for both sys clock domain and clock domain
for sdram. Additionally set up clock domain for VGA periph.
2019-12-30 23:25:43 +01:00
9ed68d129f
platforms/de10lite: add additional configuration
...
Use single image with memory initialization
to make more space for SoC ROM sector.
2019-12-30 23:23:44 +01:00
28753a2c04
platforms/de10lite: remove UART pins from GPIO resource
...
V10 and W10 pins were used in UART periph, causing error
when gpio_0 were requested.
2019-12-30 23:06:58 +01:00
359918c2a2
Comment out template overrides for now.
2019-12-30 19:23:05 +01:00
1f32dcf662
partner: rename orange_crab to orangecrab
2019-12-30 12:07:34 +01:00
8965b01347
partner/orange_crab: cleanup, make it similar to others targets and only keep BaseSoC
2019-12-30 11:54:53 +01:00
e77afaaef0
partner: add OrangeCrab support ( https://github.com/gregdavill/OrangeCrab )
2019-12-30 11:54:45 +01:00
39e428581f
Adding initial support for Saanlima's Pipistrello LX45 board
2019-12-29 18:29:11 -08:00
48476be9e2
aller/nereid/tagus: LitePCIeWishboneBridge's shadow_base replace with base_address
2019-12-14 22:10:04 +01:00
7184032555
aller/neired/tagus: fix gateware/software build directory
2019-12-14 11:29:15 +01:00
4334ba9527
partner/aller, nereid, tagus: Remove deprecated param
...
get_csr_header parameter with_shadow_base
removed/deprecated in litex 2a8d8c8f. New default
behavior matches the desired behavior in these targets.
2019-12-14 01:04:28 +00:00
3012cf75fe
partner/aller, nereid, tagus: Use updated csr APIs
...
litex commit 8be5824e258b84df240d34636aaa539124b92c65 simplified the handling
of csr regions and constants.
2019-12-14 01:00:52 +00:00
d91458c3e6
targets/versa_ecp5: fix compilation with diamond
2019-12-06 16:16:19 +01:00
30ea463b41
targets: keep attributes are no longer needed since automatically added when applying constraints to signals.
2019-12-06 16:01:59 +01:00
8fa3f09226
partner/c10prefkit: apply ethernet constraints on nets as done on Xilinx devices.
2019-12-06 15:22:40 +01:00
0a56d86b1a
partner/c10lprefkit: remove FAMILY platform_command (not needed)
2019-12-06 15:21:48 +01:00
5193f7155a
partner/aller,nereid & tagus: fix compilation
2019-12-03 09:37:18 +01:00
f7fbfb4639
partner/community/targets: uniformize, improve presentation
2019-12-03 09:33:08 +01:00
1b1370d086
official/targets: uniformize, improve presentation
2019-12-03 09:07:09 +01:00
4e13b7fdab
targets: fomu: move SoCCore import definition
...
The SoCCore definition used to be available under litex.soc.integration,
however it was removed in
626533ce9d
2019-11-25 12:46:21 +08:00
0da263fa75
platforms: fomu: add spiflash4x definition
...
Fomu Hacker supports dual spi, so add a "spiflash4x" definition.
The litex spi_flash module will run this flash in dual mode, because the
`dq` array is only two signals wide.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 21:56:57 +08:00
45b847b466
fomu: add documentation to crg
...
This documentation can be fetched using a package such as lxsocdoc.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-23 12:55:26 +08:00
2c82e02df9
fomu: pvt: swap miso and mosi
...
These pins were swapped in the definition, which made them not work so
well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-22 18:57:26 +08:00
4231d59901
platforms/target: only catch ModuleNotFoundError exceptions to improve error reporting (thanks mwelling)
2019-11-16 09:40:30 +01:00
2a0fbcadd2
ac701: add pcie_x1 pins
2019-11-06 09:29:55 +01:00
5bd8c4d74f
targets/trellisboard: use ECLKBRIDGECS to allow ECLK to reach all DDR banks (fixes Diamond build)
2019-11-01 10:52:56 +01:00
1ae26dd499
targets: use type="io" instead of io_region=True
2019-10-30 16:35:32 +01:00
8878c0a84a
versa_ecp5, trellisboard: add trellis toolchain specific arguments
...
Sync up with Litex commit #49372852d.
2019-10-29 12:32:41 -04:00
5f80633154
targets: increase integrated ROM size if EthernetSoC used
...
Sync up with litex commit #201218b2c.
2019-10-29 12:32:41 -04:00
c83e10d9f3
official/platforms/versa_ecp5: add serdes refclk/sma
...
Sync up with litex commit #ae9c25b74.
2019-10-29 12:32:41 -04:00
91083f99a8
ulx3s: simplify SDRAM module selection
2019-10-13 21:15:22 +02:00
6f3b194bd3
Merge pull request #20 from lolsborn/ulx3s-target
...
memory device selection for ulx3s
2019-10-13 20:59:16 +02:00
abf6f7b09a
memory device selection for ulx3s
2019-10-13 09:27:33 -07:00
53d5ed1226
Merge pull request #19 from lolsborn/ulx3s-target
...
add sys clock freq flag, uses same method as current versa code
2019-10-13 10:32:43 +02:00
34507eb431
add sys clock freq flag, uses same method as current versa code
2019-10-13 00:44:07 -07:00
92cfd629df
partners: fomu-evt: add "dbg" connector
...
This connector is for the six "debug" pins on the Raspberry Pi header.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:39:19 +08:00
09a55d20c1
partners: fomu-evt: fix spiflash4x pin mapping
...
The D3 and D4 pins were swapped around, leading to interesting issues.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:38:50 +08:00
785909ac5f
targets: switch from shadow_base to io_regions
2019-10-09 11:09:59 +02:00
19e2a12266
Merge pull request #18 from xobs/fomu-cpu-updates
...
Fomu cpu updates
2019-09-27 16:55:27 +08:00
c20c489d66
fomu-evt: add i2c pins
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-27 11:26:23 +08:00
48cd1208df
targets: sync with litex targets
2019-09-25 14:09:25 +02:00
0ead12bae8
targets/ulx3s: revert to cl=2
2019-09-25 13:58:45 +02:00
c8e8f254ca
targets: fomu: add USBSoC and default to heap placer
...
The heap placer is important enough that we should just make it the
default.
Also, add a `USBSoC` that includes the required interrupt table, as this
must be specified prior to calling `__init__()`.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:08:05 +08:00
218bd353c1
targets: fomu: use memory array for sram address
...
Use the memory array to find the address for the sram bank.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:07:26 +08:00
348677598d
targets: fomu: support building with a cpu
...
Allow the user to specify a CPU.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:06:23 +08:00
e94c6c8f27
partner/netv2: switch to MVP (K4B2G1646F instead of MT41J128M16)
2019-09-12 09:52:13 +02:00
91feb59f49
Merge branch 'master' of http://github.com/litex-hub/litex-boards
2019-09-11 23:02:44 +02:00
a92ce32f91
targets/netv2: add clk100 (for framebuffer)
2019-09-11 23:02:21 +02:00
ec97d01feb
platforms/netv2: add spiflashx4, hdmi in/out
2019-09-11 23:01:58 +02:00
91a1520655
add initial Trenz Cyclone 10 LP RefKit support with SDRAM/HyperRAM/Ethernet
2019-09-10 11:32:29 +02:00
c6bb34d78a
partner/targets/nereid: MT8KTF51264 now in LiteDRAM
2019-09-09 08:50:06 +02:00
b4eefa6c33
import: allow importing directly from litex_boards.platforms or litex_boards.targets
2019-09-03 15:30:20 +02:00
ec5540454b
partner: aller/nereid/tagus fix copyright (Rohit Singh as main author), do some cosmetic
2019-09-02 11:43:30 +02:00
cd527f0fcb
Merge branch 'master' into master
2019-09-02 11:29:22 +02:00
d78965ffb2
partner/targets/fomu fix copyright & mode
2019-09-02 11:23:43 +02:00
bdbd2ec1c0
partner: add fomu target
...
This adds the Fomu target back in. The default BaseSoC supports
various USB methods, and will be updated as more become available.
The debug bridge may optionally be added.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-02 14:18:09 +08:00
e704014b36
targets/__init__: comment targets import until we found a way to avoid litedram/liteeth dependecies for targets no using them.
2019-09-01 11:43:21 +02:00
346621b9fc
partner: add platforms and targets for aller, tagus and nereid boards
2019-09-01 03:02:04 -05:00
1131af05af
nexys_video: generate clk100
2019-08-27 14:05:07 +02:00
f661ee0ec9
targets: fix import
2019-08-26 11:00:12 +02:00
ac58d57a83
targets: import platforms from litex_boards.platforms
2019-08-26 09:09:40 +02:00
b84308cb58
list all platforms/targets in platforms.py, targets.py to ease import
2019-08-26 09:07:07 +02:00
618f41bb1e
Update ecp5_evn.py
...
The system clock was driven directly while it should be driven by the PLL.
2019-08-22 02:27:50 +02:00
1abca7dcff
Turn litex_boards.community into module
2019-08-12 00:17:26 +02:00
ad21f15782
Merge pull request #10 from DurandA/ecp5-evn
...
Add ECP5 Evaluation Board
2019-08-09 12:37:36 +02:00
c90950e319
Default to 60 Mhz system clock on ECP5 Evaluation Board
...
Exact PLL clock can be derived from U1 12 Mhz or X5 50 Mhz clock.
2019-08-09 11:58:30 +02:00
9e6dccc277
Remove ECP5 Evaluation Board programmer
2019-08-09 11:54:49 +02:00
4126ed21d5
Add X5 clock and PLL to ECP5 Evaluation Board
2019-08-09 11:54:38 +02:00
c7444fe19c
Add ECP5 Evaluation Board
2019-08-09 09:45:13 +02:00
2596b20982
partner/targets/fomu: remove for now since only has a CRG (we'll add one later with a real design)
2019-08-07 09:08:11 +02:00
0c1fa7f4a8
partner/platform/fomu: cleaup, make it similar to others platforms
2019-08-07 09:04:31 +02:00
9f3ed82097
keep up to date with LiteX
...
- use 1e9/freq for default_clk_period
- add default serial on tinyfpga_bx
- use S6PLL on minispartan6
- add SPIFlash pins on versa_ecp5
2019-08-07 08:47:08 +02:00
bbf0e770e9
partner/targets/trellisboard: cleanup/update
2019-07-12 19:39:12 +02:00
a792502756
targets: make sure all targets have copyrights & #!/usr/bin/env python3
2019-07-12 19:36:49 +02:00
e470b55d2b
fomu, trellisboard: +x
2019-07-12 19:24:08 +02:00
a88970a67f
move trellis board from community to partner
2019-07-12 19:23:21 +02:00
82d73b8359
Merge branch 'master' of http://github.com/litex-hub/litex-boards
2019-07-12 19:19:31 +02:00
debafd7c17
official/partner: update
2019-07-12 19:19:01 +02:00
a07e88d761
community: Add TrellisBoard
...
Signed-off-by: David Shah <dave@ds0.me>
2019-07-09 15:52:28 +01:00
adcc34b528
Turn litex_boards.partner into module
2019-07-01 19:36:34 +02:00
325b6399a2
add test/test_targets (only test platforms with simple target for now)
2019-06-24 12:38:58 +02:00
aeddb93729
add copyright header to all files, udpate.
2019-06-24 12:13:54 +02:00
49ffc94e85
partner: platforms: fomu_evt: rename rgb_led_n -> rgb_led
...
The evt platform has a different naming scheme from the other two
versions of Fomu.
This harmonises the naming of the rgb_led pads between all of the Fomu
variants.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-06-19 19:21:15 -07:00
d01711fdf9
partner: targets: add fomu target
...
The `fomu` target represents a generic target that supports the Fomu
48 MHz crystal, with or without a PLL.
It does not yet include a BaseSoC, since that requires USB and
up5kspram, neither of which are present yet.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-06-19 12:58:13 -07:00
482a00aa76
fomu: move to right location
2019-06-12 19:50:46 +02:00
44d01edab9
dispatch platforms/targets by level of support
2019-06-10 18:59:49 +02:00
4213c75e48
init repo with litex official boards
2019-06-10 17:11:36 +02:00
Florent Kermarrec
Mark
Marcin Sloniewski
Gabriel Somlo
Arnaud Durand
Drew Fustini
Tim Ansell
Greg Davill
Giammarco Zacheo
Derek Kozel
Sean Cross
Steven Osborn
Antti Lukats
Rohit Singh
David Shah