af09c81db6
adding colognechip_gatemate_evb
2024-02-28 17:27:21 +01:00
82c0e191a7
QMTech XC7K325T: use the buttons on the core board
2024-02-28 04:40:17 +07:00
33a0975dd7
litex_acorn_baseboard_mini: Allow configurable sys_clk_freq with Ethernet/Etherbone.
2024-02-27 12:38:08 +01:00
72ea25512b
QMTech XC7K325T: remove wrong reset button assignment
2024-02-27 15:42:38 +07:00
7bc03e5fbc
targets/litex_acorn_baseboard_mini: Make it similar to other targets and keep SoC + UART + DRAM + Ethernet.
2024-02-26 17:29:09 +01:00
aa34acc426
targets/digilent_arty: Allow --with-ethernet and --with-etherbone and remove --with-hybrid.
2024-02-26 15:56:58 +01:00
feae57e7fb
target/qmtech_kintex7_devboard: +X.
2024-02-26 15:41:09 +01:00
23313de1b4
targets: Add initial litex_acorn_baseboard_mini target from acorn_baseboard repository.
2024-02-26 12:25:15 +01:00
6d07eda3c0
targets/digilent_arty: Fix indent on with_usb.
2024-02-21 10:06:49 +01:00
68e0453677
targets/digilent_arty: Move USB integrated to BaseSoC.
2024-02-21 09:03:53 +01:00
8242ab3974
targets/digilent_arty: Add Ethernet/Etherbone Hybrid mode + USB-Host (through Machyne PMOD).
2024-02-20 19:44:10 +01:00
9c3f272f6e
platforms/lambdaconcept_ecpix5: Minor cleanup.
2024-02-09 12:20:12 +01:00
f7c7a5a7e5
Merge pull request #563 from smunaut/adi
...
Some minor updates to the ADI ADRV2CRR board
2024-02-06 16:33:53 +01:00
a6f8f0e696
Merge pull request #561 from ruurdk/qmtech
...
Add support for QMTech Kintex 7 Development board
2024-02-06 16:29:54 +01:00
b3caabcca3
di_adrv2crr_fmc: Bump PCIe to 8 lanes
...
There used to be an issue with 8 lanes litepcie USP for that board
when it was first added, but it's been solved now, so might as well
use all the available lanes
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2024-02-05 11:43:02 +01:00
2264df8a0a
adi_adrv2crr_fmc: Speedgrade of the PLL is -2
...
Speedgrade of the chip was updated in a previous commit, but
I forgot to update the PLL too
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2024-02-05 11:42:14 +01:00
66152390ba
Add support for QMTech Kintex 7 Development board
2024-02-01 16:16:01 +01:00
741082e5ee
Merge branch 'litex-hub:master' into axau15_update
2024-01-27 03:28:28 +01:00
721fa0b4b3
axau15: added more FMC+ pins and made some corrrections
2024-01-27 03:27:48 +01:00
39dc0b36a4
sipeed_tang_mega_138k: Fix build with ethernet and local/remote ip indent.
2024-01-22 13:20:07 +01:00
dbcd5bc3f5
Merge pull request #559 from racerxdl/master
...
sipeed_tang_mega_138k: Added PCIe reset and other pins from sipeed dock
2024-01-15 08:42:37 +01:00
261c61cf62
targets/sipeed_tang_nano_4k: Remove commited spiflash.o.
2024-01-14 11:24:18 +01:00
3438f74224
sipeed_tang_mega_138k: Added PCIe reset and other pins from sipeed documentation
2024-01-13 04:38:54 -03:00
926d54cb41
sipeed_tang_nano_4k: Switch to LiteX's UART and expose hyperram parameter.
2024-01-11 13:54:44 +01:00
688a020f35
sipeed_tang_meta_138k: Add gowin_ae350 CPU initial support.
...
./sipeed_tang_mega_138k.py --cpu-type=gowin_ae350 --build --flash
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2024 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Jan 11 2024 12:37:50
BIOS CRC passed (0efaefbe)
LiteX git sha1: e689aab1
--=============== SoC ==================--
CPU: Gowin AE350 @ 800MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128.0KiB
SRAM: 8.0KiB
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> ident
Ident: LiteX SoC on Tang Mega 138K 2024-01-11 12:37:47
2024-01-11 13:17:05 +01:00
29143a89f8
platforms/sipeed_tang_mega_138k: adding some resources/connectors definition (SPI flash, Buttons, SDRAM connector)
2024-01-10 10:37:01 +01:00
52f9f0f107
Merge pull request #555 from machdyne/master
...
add support for minze board
2024-01-07 08:10:51 +01:00
52aeec00d7
sipeed_tang_nano_4k: Remove note since openFPGALoader regression has been fixed.
2024-01-04 18:29:31 +01:00
c0a98a6b9d
targets/sipeed_tang_nano_4k: Directly integrate flashing of EMCU flash.
...
Ex to build/flash bitstream + firmware with EMCU:
./sipeed_tang_nano_4k.py --cpu-type=gowin_emcu --build --flash
2024-01-03 13:07:44 +01:00
55ade3b2df
sipeed_tang_nano_4k: Minor cleanup/add comments.
2024-01-02 13:42:56 +01:00
fd59d954ba
add support for minze board
2023-12-29 06:01:59 +01:00
982038508e
alinx_axau15/PCIe: Switch to Gen3/128-bit for now (configuration used on others Ultrascale+ Gen3 X4 boards).
2023-12-28 19:56:52 +01:00
e229d1a0b6
alinx_axau15: First review/cleanup pass and fix missing INTERNAL_VREF on bank 66.
2023-12-28 19:48:50 +01:00
b340d9e5e7
Merge pull request #550 from Johnsel/master
...
alinx_axau15: Added new Alinx Artix US+ board
2023-12-28 19:24:14 +01:00
754b6d2427
add support for mozart ml1
2023-12-19 22:18:21 +01:00
e8bc9fa81d
targets/sipeed_tang_nano_4k: adding description to write Gowin EMCU firmware
2023-12-14 13:24:57 +01:00
4166a94a1f
prog/openocd_ecpix5.cfg: refresh/fix
2023-12-13 18:34:02 +01:00
2c2b3e318a
Fixed pinout and first steps adding PCIe support
2023-12-12 15:44:51 +01:00
ab60d91138
alinx_axau15: Fixed minor clock and sdcard reference issues
2023-12-05 21:14:57 +01:00
7be052911b
alinx_axau15: Added new Alinx Artix US+ board
2023-12-05 20:45:57 +01:00
ba86121ea9
platforms/efinix_trion_t120_bga576_dev_kit: P2/P3 description
2023-11-14 19:27:59 +01:00
6333fbe724
targets/siglent_sds1104xe: Update with new LiteX Ethernet/Etherbone integration.
2023-11-13 09:02:09 +01:00
1969b4f6d3
siglent_sds1104xe: Update Ethernet/Etherbone integration.
2023-11-10 18:58:42 +01:00
0ee5fedb63
platforms/sipeed_tang_mega_138k: move RGMII Ethernet to dock_io
2023-11-10 07:41:09 +01:00
fd36608438
sipeed_tang_mega_138k: fix pins DRIVE, remove a[15], fix memory model
2023-11-10 07:39:19 +01:00
17a0152ef9
Merge pull request #547 from trabucayre/tangMega138k
...
Tang mega138k
2023-11-09 11:56:58 +01:00
4ff1362e5b
targets,platforms/sipeed_tang_mega_138k: fix copyright
2023-11-09 11:55:35 +01:00
8e3dc21ce5
aliexpress_xc7k70t: Review/Cleanup.
...
- Cosmetic cleanups in platform.
- Add clk50 constraint.
- Remove JTAGBone specific support since now directly handled by LiteX.
2023-11-09 08:26:06 +01:00
69ee48d421
Add AliExpress Kintex XC7K70T board
2023-11-09 10:34:18 +07:00
2c52ce0c47
targets/sipeed_tang_mega_138k: fix SDRAM (requires Mister XSDS v3.0 extension)
2023-11-08 07:13:28 +01:00
e9f53685fe
targets/sipeed_tang_mega_138k: DDR3 support (not working)
2023-11-08 07:00:24 +01:00
8c3ac2f114
platforms/sipeed_tang_mega_138k: DDR3 IOs
2023-11-08 07:00:18 +01:00
d4e73fd389
platforms/sipeed_tang_mega_138k: fix sdram_connector pinout and move to _dock_io
2023-11-08 07:00:01 +01:00
bc74eeca78
targets/digilent_nexys_video: Use reset_buf on sys_clk's create_clkout to improve timings and demonstrate use.
2023-11-07 13:22:30 +01:00
c7ad9adacb
terasic_de2_115: Cosmetic cleanup.
2023-11-06 19:21:53 +01:00
d8228c2c0f
Merge pull request #544 from madprogrammer/master
...
Improve terasic_de2_115 target support
2023-11-06 19:17:54 +01:00
e23ac0251a
targets/sipeed_tang_mega_138k: HDMI support
2023-11-05 16:36:59 +01:00
e90c08cb30
platforms/sipeed_tang_mega_138k: adding dock io and DVI RX/TX
2023-11-05 16:26:33 +01:00
e9fd7433a6
platforms/sipeed_tang_mega_138k: adding module connectors
2023-11-05 16:25:38 +01:00
e9f26e1729
platforms/sipeed_tang_mega_138k: swapping serial pins
2023-11-05 16:23:59 +01:00
8792dd8e53
target/analog_pocket: Remove debug (Will be investigated externally).
2023-10-27 15:32:36 +02:00
554cdaab73
Merge pull request #541 from hansfbaier/master
...
QMTech boards: make Artix7 bitstream/platform commands conditional on toolchain
2023-10-24 08:41:31 +02:00
57a345cc75
tidy QMTech 7series boards, add missing bistream compression
2023-10-24 08:26:35 +07:00
ce951589d1
improve terasic_de2_115 target support
2023-10-23 21:15:00 +03:00
0d560bc240
targets/siglent_sds1104xe: Review.
2023-10-23 19:25:12 +02:00
71d8b17fff
Merge pull request #543 from trabucayre/siglent_sds1104xe_etherbone
...
targets/siglent_sds1104xe: simplify etherbone by using new etherbone's params to specify hybrid mode
2023-10-23 19:20:32 +02:00
26d112b094
targets/siglent_sds1104xe: simplify etherbone by using new etherbone's params to specify hybrid mode
2023-10-23 19:07:37 +02:00
afbf9eb8c9
target/xxx: remove with-uartbone, add_uartbone and deal with case where uartbone is required inconditionnally
2023-10-23 17:43:13 +02:00
a6f3c5276e
target/xxx: remove with-jtagbone, add_jtagbone and deal with case where jtagbone is required inconditionnally
2023-10-23 17:16:57 +02:00
41351a845a
Merge pull request #526 from Chandler-Kluser/master
...
Added QMTECH RP2040 Daughterboard
2023-10-23 11:23:44 +02:00
5f694166ce
platforms/sipeed_tang_primer_25k: swap UART TX & RX, fix TX pin (J1:20 -> J1:21)
2023-10-19 06:26:10 +02:00
a4fc45bba6
targets/efinix_titanium_ti60_f225_dev_kit: adding jtagbone support (`litex_server --jtag --jtag-config openocd_titanium_ft4232.cfg`)
2023-10-18 09:11:54 +02:00
eae62a60ac
target/analog_pocket: Fix.
2023-10-17 21:40:46 +02:00
dcf6db905a
prog/openocd_titanium_ft4232: openocd config file for efinix titanium (litex_server / jtag)
2023-10-17 18:34:51 +02:00
cc19078650
targets/analog_pocket: Disable debug for CI.
2023-10-17 15:23:58 +02:00
f86ba2dea0
targets/analog_pocket: Add debug code for framebuffer (wip).
2023-10-17 13:18:07 +02:00
9ae224a2a7
sipeed_tang_primer_25k: new board
2023-10-17 07:45:40 +02:00
3a75f6cf79
Merge pull request #537 from rniwase/master
...
xilinx_zcu102: Add pin definitions for DDR4 SDRAM and FMC connectors, add litedram to the target.
2023-10-14 20:14:53 +02:00
9fb388407a
targets/xilinx_zcu102: Add litedram to the target.
2023-10-14 00:00:26 +09:00
842819d832
platforms/xilinx_zcu102: Add pin definitions for DDR4 SDRAM and FMC connectors.
2023-10-13 23:53:10 +09:00
e0e8600db4
fix help text
2023-10-12 11:21:20 -04:00
ec2f9480b8
targets/analog_pocket: Fix indent on videophy/cores.
2023-10-09 11:59:32 +02:00
6386f290e9
targets/analog_pocket: Add --video-colorbars/video-terminal/video-framebuffer arguments.
2023-10-09 10:59:15 +02:00
dec25b7ce9
targets/analog_pocket: Add initial Video support.
...
From https://github.com/tpwrules/pocket_linux .
2023-10-09 10:14:00 +02:00
371234b369
platforms/analog_pocket: Add Video Scaler pins definitions and output_term/current strength on SDRAM pins.
...
From https://github.com/tpwrules/pocket_linux .
2023-10-09 10:12:38 +02:00
7359a331eb
analog_pocket: Add 1:2 (HalfRate) SDRAM support.
2023-10-06 19:25:42 +02:00
d00810c983
sds1104xe: Fix typo.
2023-10-06 19:25:22 +02:00
149ed9630c
platforms/ocp_tap_timecard: Add with_multiboot parameter to enable/disable multiboot images generation.
...
Generating multiboot images is not very fast, disabling it for quick P&R iterations can be useful.
2023-10-03 19:03:42 +02:00
aa853d5a48
platforms/efinix_trion_t20_bga256_dev_kit: CON4 cleanup
2023-10-02 19:19:50 +02:00
bc6f6d869e
platforms/efinix_trion_t20_bga256_dev_kit: CON3 (LVDS RX) / CON4 (LVDS TX)
2023-10-02 18:51:53 +02:00
3d7a1dd152
analog_pocket: +x.
2023-10-02 16:20:09 +02:00
6f0cd56109
update to match zcu102 constraint spec
2023-09-28 11:11:21 +02:00
fd6aee0250
targets/sqrl_acorn: Drive pcie_clkreq_n (Thanks @myftptoyman).
2023-09-27 11:06:50 +02:00
928c1a2539
platforms/sipeed_tang_mega_138k: Fix default_clk_name/period.
2023-09-26 21:07:21 +02:00
29018a8382
Merge pull request #523 from Icenowy/tangmega138k
...
[RFC] sipeed_tang_mega_138k: new board
2023-09-26 19:12:44 +02:00
5f8ac853b1
Resolve High Density bank IOStandard error
...
This resolves the following error during `build` on Vivado 2023.1:
```ERROR: [DRC BIVB-1] Bank IO standard Support: Bank 47 has incompatible IO(s) because: The LVDS I/O standard is not supported for banks of type High Density. Move the following ports or change their properties:
clk125_p```
2023-09-25 12:50:30 +02:00
1fb317840f
platforms/ocp_tap_timecard: Add clk10 and som_led.
2023-09-22 08:33:04 +02:00
c14d66cb6b
analog_pocket: Add Serial (to fix CI) and add to board list.
2023-09-21 10:11:55 +02:00
3df677cfeb
Add initial Analog Pocket platform/target with Clk/SDRAM, able to run a simple SoC with SDRAM over JTAG-UART.
...
$ ./analog_pocket.py --uart-name=jtag_uart --build --load
$ litex_term jtag --jtag-config=openocd_usb_blaster.cfg
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2023 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Sep 21 2023 08:53:57
BIOS CRC passed (1e2b3f44)
LiteX git sha1: 7d738737
--=============== SoC ==================--
CPU: VexRiscv @ 50MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128.0KiB
SRAM: 8.0KiB
L2: 8.0KiB
SDRAM: 64.0MiB 16-bit @ 50MT/s (CL-2 CWL-2)
MAIN-RAM: 64.0MiB
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 15.6MiB/s
Read speed: 22.1MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex>
2023-09-21 09:19:57 +02:00
531e13dcd6
prog: Remove too specific openocd_max10_blaster/2.cfg.
2023-09-21 09:17:00 +02:00
5064c65dac
targets: Switch to openocd_usb_blaster/2.cfg.
2023-09-21 09:16:24 +02:00
33d1569fb8
prog: Add generic openocd_usb_blaster/2 OpenOCD config files.
2023-09-21 09:15:30 +02:00
a0b7811c54
platforms/ti60_f225: Add n parameter to rgmii_ethernet_qse_ios to allow having multiple adapters.
2023-09-11 10:45:28 +02:00
c26f76e8cb
Fixed misplacement of platform file
2023-09-03 15:49:38 -03:00
632bab937e
Update qmtech_artix7_fgg676.py
2023-09-01 05:03:44 -03:00
d8b006568a
Update qmtech_artix7_fgg676.py
2023-09-01 04:53:07 -03:00
8b0c5b78ee
Added QMTECH RP2040 Daughterboard
...
Added new QMTECH Daughterboard with RP2040, which can be found in [AliExpress](https://www.aliexpress.com/item/1005005094654777.html ).
Documentation can be found [here](https://github.com/ChinaQMTECH/DB_FPGA_with_RP2040 )
2023-09-01 04:47:09 -03:00
b92c96b3a4
colorlight_i9plus: Cosmetic cleanups.
2023-08-30 17:22:11 +02:00
3471617878
Merge pull request #502 from chmousset/add_colorlight_i9plus
...
[init] added colorlight i9+ based on XC7A50 FPGA
2023-08-30 16:54:26 +02:00
c960e85d11
targets/efinix: Now rely in LiteX to automatically exclude Tristate IOs.
2023-08-30 09:59:23 +02:00
4bb064853d
targets/efinix: Update RGMII PHYs (IOs are now directly excluded in PHYs).
2023-08-30 08:56:20 +02:00
347b477b07
sipeed_tang_primer_20k: Fix DDR3 module, SoC reset and remove DDR3 debug code.
...
Now passing memtest with valid reported memory size:
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2023 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS CRC passed (d32a9529)
LiteX git sha1: 85dadb82
--=============== SoC ==================--
CPU: VexRiscv SMP-LINUX @ 48MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 64.0KiB
SRAM: 6.0KiB
L2: 512B
SDRAM: 128.0MiB 16-bit @ 192MT/s (CL-6 CWL-5)
MAIN-RAM: 128.0MiB
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
m0, b00: |00000000| delays: -
m0, b01: |00000000| delays: -
m0, b02: |01100000| delays: 01+-00
m0, b03: |00000000| delays: -
best: m0, b02 delays: 01+-00
m1, b00: |00000000| delays: -
m1, b01: |00000000| delays: -
m1, b02: |01100000| delays: 01+-00
m1, b03: |00000000| delays: -
best: m1, b02 delays: 01+-00
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 11.7MiB/s
Read speed: 17.4MiB/s
2023-08-29 16:50:17 +02:00
4862d0667c
Merge pull request #515 from josuah/crosslink_nx_openocd
...
Allow use of OpenOCD for the Crosslink-NX
2023-08-28 16:35:20 +02:00
232e829b8f
Merge branch 'master' into crosslink_nx_main_ram
2023-08-28 16:34:27 +02:00
a9ecbffe8f
Merge pull request #520 from josuah/crosslink_nx_prog_flash
...
targets/lattice_crosslink_nx_evn: fix arguments in flash programming
2023-08-28 16:33:23 +02:00
2c3d77b5be
Merge branch 'master' into crosslink_nx_spi_flash
2023-08-28 16:32:37 +02:00
efb76133be
Merge pull request #519 from josuah/fix_crosslink_nx_uartbone
...
Crosslink-NX EVN: fix UARTBone always disabled
2023-08-28 16:31:29 +02:00
5799c35247
platforms/gsd_orangecrab: Set alt point to DFUProg.
2023-08-28 16:28:04 +02:00
a5a6a313cc
targets/lattice_crosslink_nx_evn: add main_ram section for firmware
...
This takes the values from the Antmicro SDI MIPI converter as a model
and is enough to run a Zephyr hello world, but not seemingly enough for
a the Zephyr Shell sample.
Related: https://github.com/litex-hub/zephyr-on-litex-vexriscv/pull/13
2023-08-18 19:56:58 +02:00
ebfb9b8e01
sipeed_tang_mega_138k: new board
...
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-08-15 16:33:13 +08:00
2e5c6eb7a7
platforms/crosslink_nx_evn: add SPI flash support
2023-08-11 16:46:52 +02:00
1a46bcce5e
targets/lattice_crosslink_nx_evn: fix arguments in flash programming
2023-08-10 14:39:01 +02:00
3c0b6956cc
platforms/crosslink_nx_evn: Fix 5412d0e always disabling uartbone
...
Also fix a warning about register_mem being deprecated, taking
inspiration from platforms/crosslink_nx_vip
2023-08-09 18:07:13 +02:00
8172a304b3
platforms/crosslink_nx_evn: allow use of OpenOCD
2023-08-08 23:25:41 +02:00
3903cdee92
Merge pull request #517 from bayi/master
...
Digilent CMOD A7 ISSIRAM fix
2023-08-08 19:29:32 +02:00
4362cb23a1
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:32 +02:00
a6b025f7f3
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:15 +02:00
5412d0e0e9
platforms/crosslink_nx_evn: allow use of UARTBone
...
This goes along a small resistor jumper modification and firmware flashing like
it is for the ECP5 board. A warning message is added as the default serial might
be affected (--serial serial by default). The FTDI modification software used
for the ECP5 seems to be requried and matching.
This can be tested this way:
targets/lattice_crosslink_nx_evn.py --csr-csv=csr.csv --toolchain=oxide --programmer=openocd --uart-name crossover+uartbone --build --load
litex_server --uart --uart-port /dev/ttyUSB1
litex_cli --regs
2023-08-04 20:47:32 +02:00
efc15a91a9
global: Use new WaitTimer integrated cast to int.
2023-08-01 14:56:35 +02:00
538399cb3b
lattice_ecp5_evn: update OpenOCD syntax
...
When running `litex_server`, this error appeared:
can't read "_CHIPNAME": no such variable
This is a fix for the specific lattice_ecp5_evn board.
It also refreshes the OpenOCD syntax.
2023-07-31 14:05:34 +02:00
cbcf6df26f
lattice_ecp5_evn: add_jtagbone flag
...
This follows https://github.com/enjoy-digital/litex/pull/1087 which
allows using the built-in JTAG for both the FPGA programming and the
internal core of the FPGA.
2023-07-31 13:53:24 +02:00
2d3b81a532
efinix_trion_t120_bga576: Add Ethernet through RGMII PMOD and switch to it.
...
See https://github.com/enjoy-digital/liteeth/issues/66#issuecomment-859366899 for the PMOD.
2023-07-27 11:52:40 +02:00
c1088befe5
targets/CRG: Add rst signal when missing.
...
Allow properly reseting the PLL from the SoC.
2023-07-26 16:56:27 +02:00
ace789653f
platforms/ti60_f225: Add connector numbering to ease review/schematic comparison.
2023-07-21 09:08:22 +02:00
ce121663ff
targets/uartbone: Update with LiteX change.
2023-07-20 15:42:47 +02:00
72a951081a
xu8_pe3: Fix clk_p/n on pcie_x8.
2023-07-13 18:10:46 +02:00
18a3909a9c
global: Switch to litex.gen.genlib.misc.
2023-07-06 22:11:45 +02:00
67be3ab677
targets: +x on alchitry_cu and vcu128.
2023-07-06 13:29:35 +02:00
e9335cd67a
Fix pins in Alchitry Cu platform, add target for Alchitry Cu
2023-06-27 21:35:55 +05:30
061a768495
Add Alchitry Cu board
2023-06-16 21:36:57 +05:30
c49a50a934
platform/gsd_butterstick: Add mssing USB comment.
2023-06-16 09:10:47 +02:00
28ecb1e9f3
enclustra_mercury_xu8_pe3: Fix pcie_x8 and add GTH banks for pcie_x4/x8.
2023-06-15 17:57:38 +02:00
06e8829eb4
platforms/gsd_butterstick: Add default programmer to avoid breaking older designs.
2023-06-14 16:40:35 +02:00
58805f037c
avnet_aesku40: Expose ethernet/etherbone parameters.
...
To be able to test more easily usrgmii build.
2023-06-13 09:26:07 +02:00
4705a0274e
Support SPI Flash in Colorlight 5A-75x
2023-06-09 13:43:34 -04:00
96175a9986
sitlinv_stlv7325_v2: Add default value to vccio.
2023-06-07 15:00:49 +02:00
765ee1a3ce
sitlinv_stlv7325_v2: VCCIO jumper default factory setting is 3.3V
2023-06-07 10:12:55 +07:00
b01abce7d5
platform/stlv7325-v2: update VCCIO to fix --with-pcie generation
2023-06-01 16:45:33 -04:00
7fc8ca9816
Merge pull request #506 from sensille/rv901t-spiflash
...
Add spiflash definition to linsn_rv901t board
2023-05-30 22:36:14 +02:00
8a263c18f2
sitlinv_stlv7325: Rename to v1 and update VCCIO to fix --with-pcie generation.
2023-05-30 10:39:20 +02:00
Gwenhael Goavec-Merou
Hans Baier
Florent Kermarrec
Sylvain Munaut
Ruurd Keizer
John Simons
Lucas Teske
Gwenhael Goavec-Merou
inc
Hans Baier
Sergey Anufrienko
rniwase
darryln
Liana Koleva
Chandler Klüser
Chandler Klüser
Josuah Demangeon
Icenowy Zheng
Bayi
Mark1626
Ilya Ostrovskiy
Gabriel Somlo