977 commits

Author	SHA1	Message	Date
Hans Baier	2f13decc49	stlv7325: make VCCIO configurable	2023-04-07 09:27:03 +07:00
Hans Baier	abd639ba9e	stlv7325: add 2.54mm headers	2023-04-07 08:21:17 +07:00
Hans Baier	3f85e4ae62	stlv7325: add BTB connectors	2023-04-07 08:09:27 +07:00
Hans Baier	b3e44324d1	sitlinv_stlv7325: add FMC connector	2023-04-07 07:56:27 +07:00
Hans Baier	5067a2683f	sitlinv_stlv7325: add video HDMI, enable compressed bitstream	2023-04-07 07:31:42 +07:00
Hans Baier	43ce24dcb3	add QMTech 5CEFA5 Cyclone V board support	2023-04-06 18:27:51 +07:00
Florent Kermarrec	ae3d5d599b	sqrl_fk33: Remove es1 workaround now that recent version of Vivado support it non-es devices.	2023-04-04 18:11:38 +02:00
enjoy-digital	e11d40a249	Merge pull request #487 from ICE-V-Wireless/master ... Add PMOD registrations to ICE-V Wireless	2023-04-02 11:44:02 +02:00
Michael Welling	5de47baa44	Add PMOD registrations to ICE-V Wireless ... Signed-off-by: Michael Welling <mwelling@ieee.org>	2023-04-02 03:31:55 -05:00
Hans Baier	f564f80826	terasic_deca: hdmi i2s uses 1.8V, not 3.3V	2023-04-01 08:14:09 +07:00
Hans Baier	74c8569a5c	DDR3 RAM works on 1.5V, not 1.35V	2023-03-27 15:17:42 +07:00
Hans Baier	40c8e62b09	use bistream compression on those large devices	2023-03-21 09:25:56 +07:00
Hans Baier	0125ae4271	Add support for QMTech Artix7 200T FBG484 board	2023-03-20 08:21:36 +07:00
Hans Baier	98ddb97f5e	Support QMTech XC7A75T, XC7A100T core boards	2023-03-20 07:57:58 +07:00
Icenowy Zheng	6b8a5d35c0	sipeed_tang_nano_20k: support copackaged SDRAM ... The copackaged SDRAM of GW2AR-18 QN88 package is 8MB size, 32bit DQ width. Add support for it. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2023-03-13 17:11:06 +08:00
Icenowy Zheng	291c43b898	sipeed_tang_nano_20k: new board ... This board uses Gowin GW2AR series chip (which is GW2A with integrated RAM). Support for the integrated SDRAM on Tang Nano 20K is still TODO. Note: currently when the SD card is enabled, block 0 could be correctly read but block 1 will fail. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2023-03-13 16:45:25 +08:00
Marco	28a1aefc21	Update sipeed_tang_nano_9k.py ... add pin info for _connectors	2023-03-09 17:57:39 +01:00
Florent Kermarrec	1df46d1571	platforms/sipeed_tang_nano_9k: Review SPI RGB LCD addition.	2023-03-06 09:03:12 +01:00
Marco	8d35591f47	Update sipeed_tang_nano_9k.py ... add SPI-Interface for the 1.14inch LCD	2023-03-04 15:25:59 +01:00
Florent Kermarrec	943cf2636f	platforms/sipeed_tang_primer_20k: Add checkme on leds IOstandard.	2023-03-02 12:14:04 +01:00
Florent Kermarrec	9e73ba53ea	platforms/sipeed_tang_primer_20k: Update hdmi pins to official dock version and fix compilation. ... Test: ./sipeed_tang_primer_20k.py --cpu-type=serv --with-video-terminal --build --load Working.	2023-03-02 11:39:41 +01:00
Florent Kermarrec	47659835b0	platforms: Switch US/USP platforms to XilinxUS/USPPlatform. ... We were still using Xilinx7SeriesPlatform.	2023-03-01 09:37:55 +01:00
Florent Kermarrec	8a6f0bd94f	opalkelly_xem8320: Review and update to recent LiteX changes.	2023-03-01 09:16:51 +01:00
AEW2015	e20391d366	Basic SoC for Opal Kelly XEM8320	2023-02-28 13:19:12 -07:00
inc	33cfe59614	add pullups for kopflos ethernet	2023-02-22 08:00:58 +01:00
inc	bd20b31a5c	add support for machdyne kopflos board	2023-02-21 11:18:22 +01:00
Michael Welling	b1df2c0f85	Add initial support for the ICE-V wireless ... Signed-off-by: Michael Welling <mwelling@ieee.org>	2023-02-19 00:00:07 -06:00
Florent Kermarrec	7b716e4899	antmicro_sdi_mipi_video_converter: Cleanup/Update to new LiteX conventions.	2023-02-16 09:02:14 +01:00
enjoy-digital	fe2be83feb	Merge pull request #473 from antmicro/crosslink-nx-zephyr ... Add support for SDI-MIPI Video Converter	2023-02-16 08:49:04 +01:00
Florent Kermarrec	857166e455	xilinx_alveo_u200: Add missing copyrights.	2023-02-16 08:45:34 +01:00
enjoy-digital	adf8b8c5df	Merge pull request #472 from vietthanh85/xilinx_alveo_u200 ... Add support for Xilinx Alveo U200	2023-02-16 08:42:21 +01:00
Antoni Pokusinski	31d718749a	Add copyrights	2023-02-15 12:37:33 +01:00
Antoni Pokusinski	70f2fd6368	Fix format	2023-02-15 12:37:33 +01:00
Antoni Pokusinski	0c774a906d	Add clk12 to platform	2023-02-15 12:37:33 +01:00
Tomasz Michalak	223a69cf91	Add platform and target files for Antmicro's sdi mipi video converter board ... Signed-off-by: Tomasz Michalak <tmichalak@antmicro.com>	2023-02-15 12:37:33 +01:00
Do Viet Thanh	ec7a5c4c0b	Correct DDR4 IO Banks of Xilinx Alveo U200	2023-02-14 06:40:12 +07:00
Florent Kermarrec	fdffeb8474	radiona_ulx4m_ld_v2: Do a first review/cleanup path.	2023-02-13 16:11:32 +01:00
Goran Mahovlic	99db2ae60d	Delete ulx4m_ld_v2.py	2023-02-13 11:48:51 +01:00
Goran Mahovlic	57c9cff39e	Update radiona_ulx4m_ld_v2.py	2023-02-13 11:45:48 +01:00
Goran Mahovlic	9320ae8b74	Fixing platform file	2023-02-13 11:44:59 +01:00
Goran Mahovlic	a3815efccb	Adding radiona ULX4M-LD-V2	2023-02-11 16:57:34 +01:00
MV	a354f04143	avoid undefined clocks by moving the derive*-statements to start of the additional constraints list	2023-02-09 15:58:41 +01:00
Florent Kermarrec	b9874685a5	gadgetfactory_papilio_pro: Cosmetic cleanups.	2023-01-17 15:43:12 +01:00
enjoy-digital	ec4d203eb6	Merge pull request #471 from Acathla-fr/papilio ... Target/Platform Papilio Pro added (with Arcade MegaWing)	2023-01-17 11:21:27 +01:00
enjoy-digital	801008f5ad	Merge pull request #469 from hansfbaier/hpcstore-rename ... HPC FPGA Store on AliExpress renamed itself to SITLINV	2023-01-17 11:20:19 +01:00
Do Viet Thanh	3b36e576ba	Add support for Xilinx Alveo U200	2023-01-17 06:44:21 +07:00
Fabien	05ef1ee09e	Target/Platform Papilio Pro added (with Arcade MegaWing)	2023-01-16 13:41:24 +01:00
Florent Kermarrec	55fcb4cd47	xilinx_alveo_u2x0: Improve indentation on DRAMs.	2023-01-16 09:34:59 +01:00
Florent Kermarrec	be77f82720	platforms/xilinx_alveo_u250: Fix dram numbering.	2023-01-16 09:31:23 +01:00
Florent Kermarrec	e02f64a7db	platforms/gsd_butterstick: Fix copyright.	2023-01-16 08:41:10 +01:00
Greg Davill	59a897e2dd	gsd_butterstick: Add missing pin defs	2023-01-16 17:32:39 +10:30
Hans Baier	c0773ed9b9	HPC FPGA Store on AliExpress renamed itself to SITLINV	2023-01-16 11:31:35 +07:00
Florent Kermarrec	36a4100c8b	ocp_timecard: Add DDR3 SDRAM support.	2023-01-13 12:41:34 +01:00
Florent Kermarrec	1e35d78512	ocp_tap_timecard: Add initial SMAIOs peripherals to allow using SMA over PCIe DMA or also with direct (and slow) control/visualization with CSR registers.	2023-01-13 10:08:44 +01:00
Florent Kermarrec	fc7154a632	ocp_tap_timecard: Add Leds/I2C/PMOD/GPS/SMAs IOs.	2023-01-13 09:14:05 +01:00
Florent Kermarrec	a0fd3e7536	Add initial OCP-TAP TimeCard support with PCIe/SPIFlash/Leds/Buttons/DNA/XADC (Compiles but untested).	2023-01-12 18:50:23 +01:00
enjoy-digital	563ccbd8cf	Merge pull request #464 from machdyne/master ... initial support for machdyne konfekt and noir	2023-01-01 16:12:51 +01:00
enjoy-digital	5de6865cbe	Merge pull request #463 from stone3311/master ... terasic_deca: add SPI SD card support	2023-01-01 16:10:30 +01:00
inc	f0dc9a6874	initial support for machdyne konfekt and noir	2022-12-30 17:00:35 +01:00
stone3311	6cfb56bb07	terasic_deca: add SPI SD card support	2022-12-28 02:13:06 +01:00
jiv4ik	57845d1ca4	Correct pinout and IOStandard ... Correct connector pinout Correct pinout for ETH LED IOStandard set to LVCMOS33 BTN[0] IOStandard set to LVCMOS33 Changes are made based on Tang_primer_20K_3690 and Tang_Primer_20K-Dock_3709 schemes.	2022-12-22 18:30:36 +03:00
Gwenhael Goavec-Merou	a92fdffb35	platforms/digilent_zybo_z7: reorder _io_x & _connectors_x, init cleanup	2022-12-12 22:17:39 +01:00
JoyBed	d28894a4b3	Reintroduce original Zybo + HDMI addition (#461) ... * Reintroduce original Zybo support * Reintroduce original zybo, add HDMI + fixes for Z7	2022-12-12 22:05:47 +01:00
enjoy-digital	c05ce32c8a	Merge pull request #458 from trabucayre/arty_s7_tcl_config ... Arty z7 tcl config	2022-12-08 08:31:22 +01:00
Guilherme Salustiano	25c40ddda7	add gpio to board	2022-12-05 21:38:56 -03:00
Gwenhael Goavec-Merou	e71e3ab3ec	platforms,targets/digilent_arty_z7: use a dict for PS config instead of fetching file configuration	2022-12-03 16:54:39 +01:00
Guilherme Salustiano	d0d90e9eef	Merge branch 'litex-hub:master' into master	2022-11-29 15:25:41 -03:00
mkuhn99	926ed21f0b	fixed review remarks; added zynq7000 as a submodule for using the ps as a slave	2022-11-23 17:20:25 +01:00
Guilherme Salustiano	570ea11744	fix(plataform.basys_3): V_sync is pin R19 ... Based in https://github.com/Digilent/digilent-xdc/blob/master/Basys-3-Master.xdc#LL129C34-L129C37	2022-11-23 09:16:50 -03:00
mkuhn99	6f7716adbb	added config for ps7; introduced different variants for the zybo-board; fixed pins	2022-11-18 11:15:54 +01:00
Florent Kermarrec	6e10df234f	platforms/decklink_mini_4k: Fix data2_n pin (Thanks @rdolbeau).	2022-11-14 10:21:37 +01:00
Icenowy Zheng	3d8106f84d	stlv7325: fix Ethernet IO voltages ... The IO voltages of Ethernet pins is set to 2.5V instead of 1.5V. Fix this in the platform definition. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-11-13 17:27:23 +08:00
Icenowy Zheng	4ba5793822	sitlinv_stlv7325: remove unexistent COL/CRS pins ... The COL and CRS pins of the Ethernet PHY is not connected on the board at all, but assigned dummy positions in the platform definition, which leads to Vivado warning when building. Remove these pins from the platform definition. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-11-13 17:27:23 +08:00
Gwenhael Goavec-Merou	24cd983b8c	platforms/alinx_axu2cga: adding missing psu_config at platform level	2022-11-06 21:52:00 +01:00
Gwenhael Goavec-Merou	9960f38d95	targets: replace LiteXSoCArgumentParser by LiteXArgumentParser, remove tasks done LiteXArgumentParser	2022-11-06 11:27:47 +01:00
Icenowy Zheng	d7184fb043	stlv7325, a_e115fb: use the proper vendor name Sitlinv ... The boards are in fact from a vendor called 成都赛特凌威科技有限公司, and their English registered trademark (used on the banner of their Taobao store) is Sitlinv, which sounds like 赛特凌威. Use this vendor name instead of where it's bought. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-10-30 10:51:13 +08:00
enjoy-digital	6c05ddae1b	Merge pull request #438 from shawnanastasio/nexys4_part_name ... platforms/nexys4*: Update part name	2022-10-27 12:11:07 +02:00
Chema	125569b2cb	add FPGAWars Alhambra II	2022-10-25 21:12:02 +02:00
enjoy-digital	474dcb5fb3	Merge pull request #436 from Icenowy/isx-im1283 ... Add ISX iM1283 board	2022-10-22 15:56:43 +02:00
Shawn Anastasio	d4b2461b5a	platforms/nexys4*: Update part name ... Symbiflow/f4pga don't recognize the part name xc7a100t-CSG324-1, so change it to xc7a100tcsg324-1 which works with both f4pga and Vivado.	2022-10-21 14:15:27 -05:00
Florent Kermarrec	377cda05a3	ti60_f225_dev_kit: Switch 1.2V banks to 1.8V to fix compilation issues with latest Efinity. ... Will need to be investigated more.	2022-10-20 18:21:52 +02:00
Icenowy Zheng	745ebbbfa1	Add ISX iM1283 board ... ISX iM1283 is a "simple eDP signal generator" which utilizes a XC7A100T FPGA, and come with a header populated with the FPGA's JTAG. This commit adds initial reverse engineered IOs including the DDR3 DRAM (which cannot work reliably @ DDR3-800, so the system clock is defaultly set to 80MHz now), two LEDs and SD slot. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-10-14 22:50:43 +08:00
Florent Kermarrec	23c6acd013	platforms/ti60_f225_dev_kit: Fix IO voltage conflicts between peripherals/banks. ... Was already reported as a warning on 2021.1.165.2.19 but now an error with 2022.1.226. Note: To get the build working with 2022.1.226 the following change had to be done to pt/bin/writer/pinout.py, line 2254: - table.add_rows(table_rows) + for table_row in table_rows: + table.add_row(table_row) This would need to be investigated more to know if related to our local setup/machine.	2022-10-14 10:22:54 +02:00
Florent Kermarrec	3b339ba9a3	platforms/xilinx_kc705: Fix flash proxy name.	2022-10-13 08:48:33 +02:00
Florent Kermarrec	99888c52ce	xilinx_kc705/i2c: Add pullups.	2022-10-11 17:26:06 +02:00
Franck Jullien	3ec18c3583	Add qmtech Cyclone IV Starter Kit	2022-10-09 16:34:44 +02:00
Lukas F. Hartmann	c38b8b1d8c	MNT RKX7: update platform and target for D-2 release	2022-10-03 20:09:48 +02:00
Vadzim Dambrouski	cf416d0d66	stlv7325: Adjust DDR3 pins to match reference design	2022-10-01 11:15:47 +02:00
Vadzim Dambrouski	57eb907210	aliexpress_stlv7325: Fix missing parameter for PULLUP attribute	2022-09-25 23:13:44 +02:00
Florent Kermarrec	8c3a5c0608	sipeed_tang_nano_9k: Fix HDMI IOs constraints.	2022-09-23 11:18:30 +02:00
slagernate	9dbee62eac	add option to use ecpprog for crosslink-nx eval board	2022-09-15 12:27:08 -07:00
Florent Kermarrec	3cef11e04d	platforms/newae_cw305: Add sma_clk_in/out, buttons, switches and expansion header connector.	2022-09-13 14:26:52 +02:00
Florent Kermarrec	f1899954e9	Add initial NewAE CW305 board support.	2022-09-13 12:38:30 +02:00
Adam Zeloof	25c28d2c03	fixed issue with default programmer option	2022-09-10 18:16:04 +01:00
Adam Zeloof	e8504191e3	cleanup	2022-09-10 17:54:43 +01:00
Adam Zeloof	6d0a4c788e	Added DFU support to Butterstick	2022-09-10 17:45:57 +01:00
Florent Kermarrec	d39d87b701	sipeed_tang_primer_20k: Switch to PHYPadsReducer and enable the 2 modules.	2022-09-07 12:06:22 +02:00
Icenowy Zheng	1663ded641	sipeed_tang_primer_20k: Add initial DDR3 integration (WIP).	2022-09-07 11:53:24 +02:00
Florent Kermarrec	abd20f560b	sipeed_tang_primer: Minor cleanups (Rename standard dock to standard, reduce margin on hdmi5x).	2022-09-07 10:56:17 +02:00
Gwenhael Goavec-Merou	4d72c75f49	platforms/sipeed_tang_primer_20k: use replace _connectors.extend by add_connector	2022-09-06 20:19:37 +02:00
Florent Kermarrec	74d4a72494	radiona/ulx3s: Rename user_button to user_btn (consistency with other boards) and fix ident.	2022-08-26 22:25:54 +02:00
enjoy-digital	693cce73bd	Merge pull request #417 from Igor542/master ... radiona_ulx3s: add buttons	2022-08-26 22:24:05 +02:00
Gwenhael Goavec-Merou	0c14bbf0dc	sipeed_tang_primer_20k: adding dock lite support	2022-08-26 08:43:57 +02:00
Igor Safonov	9ed3b7baae	radiona_ulx3s: add buttons	2022-08-25 22:19:48 -07:00
Florent Kermarrec	94d079f469	sipeed_tang_nano_4k: Fix tab/space.	2022-08-24 16:07:18 +02:00
enjoy-digital	feff243f8f	Merge pull request #416 from shenki/artix-dc-scm ... Add Antmicro Artix DC-SCM board	2022-08-24 15:22:52 +02:00
enjoy-digital	6ba6a7e8fa	Merge pull request #414 from lambdaconcept/master ... lambdaconcept_ecpix5: fix HDMI pin	2022-08-24 15:14:11 +02:00
Joel Stanley	f48ed3d9e7	Add Antmicro Artix DC-SCM board ... Based on commits by: - Jedrzej Boczar <jboczar@antmicro.com> - Karol Gugala <kgugala@antmicro.com> Tested serial and networking on a DC-SCM with mor1k and vexriscv.	2022-08-24 13:03:36 +10:00
Pierre-Olivier Vauboin	c3e99a8419	lambdaconcept_ecpix5: fix HDMI pin	2022-08-11 18:45:10 +02:00
Chandler Klüser	7487440725	Added Tang Nano 4k Support for GoWin Educational IDE v1.9.8.03	2022-08-05 13:28:22 -03:00
Florent Kermarrec	6872f7ade6	sipeed_tang_primer_20k: Add LCD pins (untested).	2022-08-05 09:42:38 +02:00
Florent Kermarrec	c79d01064e	sipeed_tang_primer_20k: Switch Serial to Dock IOs.	2022-08-05 09:07:20 +02:00
Florent Kermarrec	f2cb211432	sipeed_tang_primer_20k: Add buttons and prepare RGB Led. ... Synthesis issue with WS2812/GowinEDA for now.	2022-08-04 16:32:50 +02:00
Florent Kermarrec	09b0c975f3	sipeed_tang_primer_20k: Add Ethernet/Etherbone (compiles but not yet working).	2022-07-26 12:53:42 +02:00
Florent Kermarrec	abe08a96aa	sipeed_tang_primer_20k: Add Video (Colorbars), compiles but does not seems to be working.	2022-07-26 12:25:10 +02:00
Florent Kermarrec	12b8063941	sipeed_tang_primer_20k: Add LedChaser through 204 pin SODIMM connector/Dock.	2022-07-26 11:44:03 +02:00
Florent Kermarrec	d49e43801e	sipeed_tang_primer_20k: Add 204 Pins SODIMM Connector. ... Will allow defining Dock peripherals.	2022-07-26 11:30:39 +02:00
inc	67ffe095cc	Merge branch 'master' of https://github.com/machdyne/litex-boards	2022-07-15 17:13:22 +02:00
inc	22dcadcfa1	rename ld board prefix to machdyne	2022-07-15 17:13:00 +02:00
Machdyne	9deef65445	Merge branch 'litex-hub:master' into master	2022-07-14 16:02:00 +02:00
enjoy-digital	52ff93a194	Merge pull request #409 from antmicro/rrozak/remove-dm-pins-from-datacenter ... Remove DM signals assignment from DDR4 Datacenter platform	2022-07-11 19:34:19 +02:00
Ryszard Różak	2357212161	Remove DM signals assignment from DDR4 Datacenter platform ... Data Masks (DM) are unsupported on x4 devices and wrong pins were assigned. Signed-off-by: Ryszard Różak <rrozak@antmicro.com>	2022-07-11 12:29:02 +02:00
Machdyne	3ecec8cd16	Merge branch 'litex-hub:master' into master	2022-07-08 16:59:55 +02:00
inc	756d019571	add support for schoko	2022-07-08 16:58:55 +02:00
Florent Kermarrec	6b02ea024a	ti60_f225_dev_kit: Fix ethernet build and enable debug. Now needs testing.	2022-06-28 19:54:00 +02:00
Florent Kermarrec	c14611b07c	ti60_f225_dev_kit: Add dummy 0 pin to connectors to use schematic numbering (1-40).	2022-06-27 19:47:19 +02:00
Robert Szczepanski	1ad2022138	quicklogic_quickfeather: Move from deprecated Symbiflow to F4PGA	2022-06-17 17:00:48 +02:00
Florent Kermarrec	29b72fac7e	taobao_a_e115fb: Minor cleanups.	2022-06-15 11:55:22 +02:00
Florent Kermarrec	0ae1417eb5	a_e115fb: Add taobao prefix (Similar to what we do on aliexpress's boards from unknown vendors).	2022-06-15 11:53:11 +02:00
enjoy-digital	4e0e381f47	Merge pull request #398 from Icenowy/a-e115fb ... a_e115fb: new board	2022-06-15 11:37:36 +02:00
Icenowy Zheng	13fbcbb159	a_e115fb: new board ... It's a core board with EP4CE115 by a random vendor on Taobao. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-06-13 23:13:29 +08:00
Florent Kermarrec	c420429a3c	efinix_ti60_f225: Add the 3 QSE connectors and add RGMII Ethernet QSE extension board.	2022-06-13 16:01:28 +02:00
enjoy-digital	d37af4aece	Merge pull request #395 from AEW2015/master ... Support for "discontinued" Avnet aes-ku040-db-g development board	2022-06-07 12:13:47 +02:00
AEW2015	313e758ffe	Updated copywrite and renamed to avnet_aesku40	2022-06-03 20:49:52 -06:00
Florent Kermarrec	6e33d9249f	sipeed_tang_primer_20k: Cleanup/Fix.	2022-06-03 11:40:10 +02:00
enjoy-digital	68733c6e92	Merge pull request #396 from Icenowy/tang20k ... sipeed_tang_primer_20k: new board	2022-06-03 10:14:55 +02:00
Icenowy Zheng	b97d9cd9e8	sipeed_tang_primer_20k: new board ... Only initial support is added. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-06-03 00:24:20 +08:00
Andrew E Wilson	4d98dd38a7	Merge branch 'litex-hub:master' into master	2022-06-01 23:01:43 -06:00
Andwer E Wilson	1b96067113	added aesku40 dev board	2022-06-01 22:54:03 -06:00
enjoy-digital	48353735fa	Merge pull request #393 from swetland/ethernet ... muselab icesugar pro: add ethernet/etherbone support	2022-05-20 22:10:02 +02:00
Brian Swetland	5a714167ed	muselab icesugar pro: add ethernet/etherbone support ... - use P4 header for a waveshare ethernet phy module - add --with-ethernet, --with-etherbone, --eth-ip, and --eth-dynamic-ip target configuration options	2022-05-19 14:46:09 -07:00
Hans Baier	2214c7baec	enclustra_mercury_kx2: remove useless clk100, because it is not connected to a clock pin	2022-05-20 04:42:06 +07:00
Hans Baier	f1e021cbbe	enclustra_mercury_kx2: add clk100, leds, base board serial, DDR3 termination, DDR3 voltage setting	2022-05-19 15:41:44 +07:00
enjoy-digital	64773b4085	Merge pull request #390 from hansfbaier/hpc-xc7k420t ... HPC Store xc7k420t	2022-05-16 11:20:15 +02:00
minexo79	efa5740811	Move HDMI Support From Sipeed Tang Nano 4K.	2022-05-15 10:53:09 +08:00
Hans Baier	26c0f546c7	Merge branch 'litex-hub:master' into hpc-xc7k420t	2022-05-14 21:40:12 +07:00
Hans Baier	006b54e7ea	Get 3 DDR modules working with Vivado	2022-05-14 21:38:25 +07:00
enjoy-digital	ee58e5dbc7	Merge pull request #388 from swetland/hdmi ... muselab: icesugarpro: fix HDMI output	2022-05-12 15:09:03 +02:00
Hans Baier	f383ad3938	Support HPC Store XC7K420T board	2022-05-12 12:55:46 +07:00
Hans Baier	d1096a2cd0	Add HPC Store XC7K420T board	2022-05-11 08:58:50 +07:00
Florent Kermarrec	0ce7f8354c	Add initial LimeSDR Mini V2 support (With SoC + USB3 (FT245PHYSynchronous)). ... python3 -m litex_boards.targets.limesdr_mini_v2 --csr-csv=csr.csv --build --load litex_server --jtag --jtag-config=openocd_limesdr_mini_v2.cfg litex_term crossover __ _ __ _ __ / / (_) /____ | |/_/ / /__/ / __/ -_)> < /____/_/\__/\__/_/|_| Build your hardware, easily! (c) Copyright 2012-2022 Enjoy-Digital (c) Copyright 2007-2015 M-Labs BIOS built on May 3 2022 18:59:46 BIOS CRC passed (5f29afcc) LiteX git sha1: a4cc859d --=============== SoC ==================-- CPU: VexRiscv @ 80MHz BUS: WISHBONE 32-bit @ 4GiB CSR: 32-bit data ROM: 128KiB SRAM: 8KiB --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely. sL5DdSMmkekro Timeout No boot medium found --============= Console ================-- litex> ident Ident: LiteX SoC on LimeSDR-Mini-V2 2022-05-03 18:59:29	2022-05-03 19:04:06 +02:00
Brian Swetland	ec220e4b5b	muselab: icesugarpro: fix HDMI output ... - enable data_n outputs - use drive_both property of updated VideoHDMIPHY to drive both differential outputs - adjust default clocking to successfully close timing (sysclk at 50Mhz, HDMI at 25MHz, HDMIx5 at 125MHz)	2022-05-03 04:04:26 -07:00
Florent Kermarrec	3ebc9877ad	1bitsquared_icebreaker: Rename to icebreaker (Python does not like number as prefix for imports).	2022-05-02 13:20:40 +02:00
Florent Kermarrec	9914478854	xilinx_ac701: Add SPI-Flash support.	2022-04-28 11:05:51 +02:00
Florent Kermarrec	ae8bdb74a9	xilinx_kc705: Add SPI-Flash support.	2022-04-28 10:27:54 +02:00
Florent Kermarrec	68ea5fe057	platforms/colorlight_5a_75b/v7_0: Comment rst_n to avoid deadlock on reboot command.	2022-04-25 18:50:17 +02:00
Florent Kermarrec	39a314cdae	Rename aliexpress_u420t to aliexpress_xc7k420t.	2022-04-21 14:28:26 +02:00
enjoy-digital	06396a2cb6	Merge pull request #384 from hansfbaier/qmtech-ep4cgx150 ... add board support for QMTech EP4CGX150	2022-04-21 10:36:51 +02:00
Florent Kermarrec	b2a346edc8	aliexpress_u420t: Review/Simplify. ... Specific integrated ROM/SRAM/MAIN_RAM size can be passed through command line parameters.	2022-04-21 10:32:18 +02:00
Florent Kermarrec	3e9e970076	Add aliexpress prefix to boards from aliexpress that seem to be from the same unknown vendor.	2022-04-21 10:06:11 +02:00
enjoy-digital	8c51cb12c8	Merge pull request #383 from sysmanalex/master ... Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board	2022-04-21 10:02:05 +02:00
Hans Baier	b41d72e1d0	add board support for QMTech EP4CGX150	2022-04-16 06:36:24 +07:00
Florent Kermarrec	23b1b15486	Add initial/minimal Pluto SDR support.	2022-04-14 12:13:03 +02:00
Alex Petrov	1e00a43fdd	board u420t kintex update v0.2	2022-04-13 00:12:59 +03:00
Alex Petrov	89570b005c	Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board	2022-04-12 22:38:14 +03:00
Florent Kermarrec	b99d788732	fairwaves/xtrx: Update with xtrx_julia improvements.	2022-04-12 17:42:52 +02:00
Florent Kermarrec	dd27a3473b	platforms: Add LambdaConcept's PCIe Screamer/M2.	2022-04-01 11:41:07 +02:00
Florent Kermarrec	867489d855	xilinx_zcu106: Add PCIe Gen3 X4 support.	2022-04-01 10:01:06 +02:00
Franck Jullien	299d4d66d6	efinix: ti60f225 add MIPI RX	2022-03-29 15:29:59 +02:00
enjoy-digital	13e5062793	Merge pull request #379 from chmousset/add_t8_devkit ... [enh] added efinix t8f81 dev kit	2022-03-28 14:58:21 +02:00
enjoy-digital	e6a9f44580	Merge pull request #378 from antmicro/add-missing-peripherals ... DDR4 datacenter: add missing peripherals	2022-03-28 14:40:22 +02:00
enjoy-digital	83d7c3fb39	Merge pull request #377 from Johnsel/arduino_mkrvidor4000 ... Board support for Arduino MKR Vidor 4000	2022-03-28 14:34:59 +02:00
Charles-Henri Mousset	7a68dcc79b	[enh] added efinix t8f81 dev kit	2022-03-26 09:52:20 +01:00
Alessandro Comodi	33516a40f4	antmicro_datacenter: add missing peripherals ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-25 13:49:41 +01:00
Alessandro Comodi	77cb866233	antmicro_datacenter: add HDMI output ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-25 10:03:07 +01:00
John Simons	501c50ff79	Fixed serial port comments hinting the correct pins.	2022-03-24 08:04:47 -07:00
John Simons	901942bda6	Cleanup for pushing. This commit combined with my litedram fork produces a running basic SoC + bios --=============== SoC ==================-- ... CPU:BUS:E 32-bit @ 4GiB CSR:16-bit @ 48MT/s (CL-2 CWL-2) --========== Initialization ============-- Initializing SDRAM @0x40000000... Switching SDRAM to software control. Switching SDRAM to hardware control. Memtest at 0x40000000 (2.0MiB)... Write: 0x40000000-0x40200000 2.0MiB Read: 0x40000000-0x40200000 2.0MiB Memtest OK Memspeed at 0x40000000 (Sequential, 2.0MiB)... Write speed: 13.6MiB/s Read speed: 21.3MiB/s --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely.	2022-03-24 07:39:14 -07:00
Hans Baier	e445c9ec71	qmtech_5cefa2: make serial pins consistent with other boards	2022-03-24 18:52:28 +07:00
Sylvain Munaut	bcedf573e0	adi_adrv2crr: Add IO definition for the AD9545 reset line ... We use PULLUP on it so that the AD9545 is by default held out of reset without the user having to do anything ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-23 20:42:30 +01:00
Sylvain Munaut	cdb78efd3c	adi_adrv2crr: Document I2C devices attached ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-23 20:42:30 +01:00
Sylvain Munaut	6c31f16df2	adi_adrv2crr: Fix I2C signal assignement ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-23 20:42:30 +01:00
Florent Kermarrec	73458ae9d7	decklink_quad_hdmi_recorder: Add Serial/UART pins.	2022-03-23 11:08:51 +01:00
enjoy-digital	d399f33dda	Merge pull request #374 from smunaut/adrv2crr ... adi_adrv2crr: Upgrade part to speedgrade 2	2022-03-23 09:09:57 +01:00
Sylvain Munaut	dc92584681	adi_adrv2crr: Upgrade part to speedgrade 2 ... Even though the schematic and bom call for speedgrade 1, this was only for the prototypes. All productions units have been updated to speedgrade 2. See this thread: https://ez.analog.com/fpga/f/q-a/112356/adrv9009-zu11eg-speed-grade And the official HDL project for the board: https://github.com/analogdevicesinc/hdl/blob/master/projects/adrv9009zu11eg/adrv2crr_fmc/system_project.tcl#L16 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-22 23:36:41 +01:00
Goran Mahovlic	68c23e9251	faster sdcard boot on 2.0	2022-03-22 17:54:12 +01:00
John Simons	b8b0aead28	Added basic support for Arduino MKR Vidor 4000	2022-03-21 18:54:29 -07:00
Florent Kermarrec	3ebad7f7cc	gsd_orangecrab/butterstick: Add assert on devices.	2022-03-18 10:44:21 +01:00
Florent Kermarrec	9faa805ab9	alinx_ax7010: Review/Cleanup.	2022-03-17 11:31:02 +01:00
enjoy-digital	3aa1042f5f	Merge pull request #367 from ggangliu/zynq_xc7z010 ... Add ALINX AX7010 board support	2022-03-17 09:52:04 +01:00
Florent Kermarrec	0f82db26da	rcs_artic_term_bmc_card: Fix is -> ==.	2022-03-17 09:45:47 +01:00
Yonggang Liu	0e7145b4a1	Update and rename xilinx_alinx_ax7010.py to alinx_ax7010.py	2022-03-17 11:21:42 +08:00
Florent Kermarrec	0745162a29	xilinx_zcu102: Review/Cleanup for consistency with others boards. ... Also remove INTERNAL_VREF constraints that are not yet useful (required for DRAM).	2022-03-16 18:47:05 +01:00
Joseph Faye	f4a48e51d7	add xilinx_zcu102 platform	2022-03-16 15:37:02 +01:00
Yonggang Liu	5365c7fce4	Rename xilinx_zynq_xc7z010.py to xilinx_alinx_ax7010.py	2022-03-15 15:50:09 +08:00
Yonggang Liu	4159faf48b	Add files via upload ... Adding zynq_xc7z010 board support	2022-03-12 12:20:54 +08:00
Robert Szczepanski	688377de7c	lpddr4_test_board: Fix button pin	2022-03-11 15:59:43 +01:00
enjoy-digital	3b74673a93	Merge pull request #363 from curliph/master ... add Gowin programmer support	2022-03-08 17:26:50 +01:00
Florent Kermarrec	f52a915487	lambdaconcept_ecpix5: Add initial Video support at 640x480 (with Terminal/Framebuffer). ... I2C intialization code adapted from https://github.com/ultraembedded/ecpix-5. Tested with: - python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-terminal --build --load - python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-framebuffer --build --load __ _ __ _ __ / / (_) /____ | |/_/ / /__/ / __/ -_)> < /____/_/\__/\__/_/|_| Build your hardware, easily! (c) Copyright 2012-2022 Enjoy-Digital (c) Copyright 2007-2015 M-Labs BIOS built on Mar 8 2022 15:34:22 BIOS CRC passed (c7fe9ecd) Migen git sha1: ac70301 LiteX git sha1: 7ebc7625 --=============== SoC ==================-- CPU: FireV-STANDARD @ 75MHz BUS: WISHBONE 32-bit @ 4GiB CSR: 32-bit data ROM: 128KiB SRAM: 8KiB L2: 8KiB SDRAM: 524288KiB 16-bit @ 300MT/s (CL-6 CWL-5) --========== Initialization ============-- Initializing SDRAM @0x40000000... Switching SDRAM to software control. Read leveling: m0, b00: |01110000| delays: 02+-01 m0, b01: |00000000| delays: - m0, b02: |00000000| delays: - m0, b03: |00000000| delays: - best: m0, b00 delays: 02+-01 m1, b00: |01110000| delays: 02+-01 m1, b01: |00000000| delays: - m1, b02: |00000000| delays: - m1, b03: |00000000| delays: - best: m1, b00 delays: 02+-01 Switching SDRAM to hardware control. Memtest at 0x40000000 (2.0MiB)... Write: 0x40000000-0x40200000 2.0MiB Read: 0x40000000-0x40200000 2.0MiB Memtest OK Memspeed at 0x40000000 (Sequential, 2.0MiB)... Write speed: 13.6MiB/s Read speed: 23.4MiB/s --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely. sL5DdSMmkekro Timeout No boot medium found --============= Console ================-- litex> ident Ident: LiteX SoC on ECPIX-5 2022-03-08 15:34:19	2022-03-08 15:40:52 +01:00
curliph	6eb906a2ca	Update sipeed_tang_nano_9k.py ... add Gowin programmer support	2022-03-08 14:00:53 +08:00
curliph	4c9bc53a3c	add Win/powershell and WSL support	2022-03-08 13:24:56 +08:00
Florent Kermarrec	cadfde4d39	litex_acorn_baseboard: Add SerDes refclk and m2_tx/rx pins.	2022-03-07 18:41:53 +01:00
enjoy-digital	50cc75fd56	Merge pull request #361 from smunaut/adrv2crr ... adi_adrv2crr: Add support for the ADI ADRV2CRR with ADRV9009-ZU11EG SoM	2022-03-07 09:24:36 +01:00
Florent Kermarrec	37783ff9fd	colorlight_5a_75e: Fix _connectors_v6_0/j16 first pin (thanks @WhichWayWazzit).	2022-03-07 09:16:07 +01:00
Sylvain Munaut	ec28ca8fa3	adi_adrv2crr: Add support for the ADI ADRV2CRR with ADRV9009-ZU11EG SoM ... This is a carrier board with a SoM mounted on it. There is also an FMC connector that can accept another AD-FMCOMMS8-EBZ to get two more ADRV9009 RFIC but support for that is not added yet. Note that the PCIe support requires : - Change the .xci in the litepcie to use the right Quad - Revert litex 3c34039b731b42e27e2ee6c8e399e5eb8f3a058f so the timing constrainst of litepcie apply correctly Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-03 22:17:09 +01:00
Alessandro Comodi	7933e9462e	antmicro_datacenter: fix i2c pads assignment ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-01 16:35:15 +01:00
Florent Kermarrec	7a5fe4c221	efinix_titanium_ti60_f225_dev_kit: Update iobank_info with the values used in the video example design.	2022-03-01 14:01:43 +01:00
Alessandro Comodi	db2d83ea29	antmicro_datacenter: use 100 MHz and add i2c master ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-01 13:00:36 +01:00
Piotr Binkowski	d6fddc746f	antmicro_datacenter: use single rank configuration	2022-03-01 12:43:08 +01:00
Piotr Binkowski	37905d1f34	antmicro_datacenter: use correct DQS pins	2022-03-01 12:43:08 +01:00
Karol Gugala	73b5143cec	antmicro_datacenter: add DCI_CASCADE ... Signed-off-by: Karol Gugala <kgugala@antmicro.com>	2022-03-01 12:43:08 +01:00
Florent Kermarrec	0ceb15938f	digilent_arty_z7: Remove fake serial.	2022-03-01 11:05:59 +01:00
Florent Kermarrec	673676e3cb	digilent_arty_a7: Switch to VivadoProgrammer.	2022-03-01 10:48:22 +01:00
Florent Kermarrec	e16e5e0591	digilent_arty_z7: Fix add_period_constraint.	2022-03-01 10:30:14 +01:00
Dave Berkeley	c9d009c735	Add ColorLight i9 v7.2	2022-02-28 14:08:49 +00:00
enjoy-digital	11dfe225fa	Merge pull request #356 from fjullien/add_mipi_tx ... efinix: add MIPI TX to platform Ti60	2022-02-25 16:53:11 +01:00
Franck Jullien	c54e92c47d	efinix: add MIPI TX to platform Ti60	2022-02-25 15:15:14 +01:00
inc	2311db18f8	add initial support for kröte fpga board	2022-02-25 14:22:19 +01:00
Florent Kermarrec	b1550f006a	stlv3225: Minor Review/Cleanup, switch to JTAG HS2 programmer.	2022-02-24 17:17:08 +01:00
Andrew Gillham	174d958ca7	Initial support for STLV7325 Kintex-7 board.	2022-02-23 18:28:55 +01:00
enjoy-digital	6661947d96	Merge pull request #354 from madscientist159/master ... Add initial support for RCS Arctic Tern boards	2022-02-23 18:06:08 +01:00
Raptor Engineering Development Team	ae4b3c0938	Add initial support for RCS Arctic Tern boards	2022-02-21 20:04:51 -06:00
Ilia Sergachev	85397818d9	add Xilinx ZCU216 support	2022-02-21 19:14:13 +01:00
Florent Kermarrec	7d84e6e863	efinix_titanium_ti60_t225: Add SPI/Native SDCard support. ... Both modes working with 8559b88ad8.	2022-02-21 10:35:06 +01:00
Florent Kermarrec	08a79fa3ac	lattice_ecp5_vip: Minor cleanups, fix CI.	2022-02-15 10:58:38 +01:00
enjoy-digital	30afe26669	Merge pull request #348 from hubmartin/ecp5-vip ... Draft: Add Lattice ECP5 VIP board + HDMI output board support	2022-02-15 08:53:57 +01:00
enjoy-digital	896884dd21	Merge branch 'master' into axu2cga_software	2022-02-15 08:21:29 +01:00
Florent Kermarrec	3f58df9974	platforms/targets: Fix typos.	2022-02-14 17:26:46 +01:00
Florent Kermarrec	b53b79821e	platforms: Expose toolchain parameter on all platforms to ease switching to alternative/open-source toolchains.	2022-02-14 11:35:18 +01:00
Florent Kermarrec	12b91eccdc	digilent_arty: Remove yosys+nextpnr INTERNAL_VREF constraint skip (now directly done in LiteX).	2022-02-14 10:45:29 +01:00
Gwenhael Goavec-Merou	50654f1b7b	platforms/alinx_axu2cga: add zynqmp PS configuration params	2022-02-12 18:19:55 +01:00
hubmartin	27b03df886	Add Lattice ECP5 VIP board + HDMI output board support	2022-02-08 21:47:58 +01:00
Arusekk	5d52bc5461	Fix seven_seg pin assignment in DE1-SoC ... Fixes quartus build error: ``` Error (171016): Can't place node "seven_seg5[6]" -- illegal location assignment PIN_AA2 File: /home/arusekk/src/fpga-proj/build/de1soc/gateware/de1soc.v Line: 49 ```	2022-02-08 09:03:53 +01:00
Florent Kermarrec	18e8bec9d4	xilinx/kv260: Minor cleanup and add Build/Use instructions (from PR).	2022-02-07 08:12:43 +01:00
Ilia Sergachev	1d8c3789af	add Xilinx KV260 support	2022-02-06 14:38:57 +01:00
Florent Kermarrec	7f4d464f1b	trellisboard: Add Video Terminal/Framebuffer support and use new I2C init feature to automatically configure TP410 at startup.	2022-02-02 09:52:12 +01:00
Jevin Sweval	fbd424fc48	DECA: Add Ethernet and Etherbone support ... Also fixed pcf_en IO standard compared to golden Arrow project.	2022-01-29 15:15:53 -08:00
Gwenhael Goavec-Merou	dd134a4b7d	digilent arty z7: allows toolchain selection (PL only)	2022-01-26 07:30:06 +01:00
Gwenhael Goavec-Merou	537f04a13d	alinx_axu2gca: new board ... Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>	2022-01-25 07:35:42 +01:00
Victor Suarez Rovere	db77ea5c7a	Add tweaks to Arty board to support yosys+nextpnr toolchain	2022-01-24 02:06:34 -03:00
enjoy-digital	787f44e7d9	Merge pull request #336 from tcal-x/cmod-a7-flash ... Digilent CMOD A7: add flash support.	2022-01-23 08:36:49 +01:00
Tim Callahan	6567af6f49	Digilent CMOD A7: add flash support. ... Add both "--flash" and "--with-spi-flash"; tested on board. 4MB flash mapped at 0x00400000. Signed-off-by: Tim Callahan <tcal@google.com>	2022-01-22 18:50:12 -08:00
Icenowy Zheng	f533e7f8ba	sipeed_tang_nano_9k: enable copackaged PSRAM ... Also enable SPI SDCard which was pending by the lack of main_ram previously. Signed-off-by: Icenowy Zheng <icenowy@aosc.io>	2022-01-23 03:37:03 +08:00
Florent Kermarrec	e35b9b439f	platforms/sipeed_tang_nano_9k: Fix copyrights and remove board diagram/description of the 4k.	2022-01-22 15:55:36 +01:00
enjoy-digital	999dbd572f	Merge pull request #334 from Icenowy/tang9k ... sipeed_tang_nano_9k: new board	2022-01-22 15:49:08 +01:00
Icenowy Zheng	e699c377a5	sipeed_tang_nano_9k: new board ... Signed-off-by: Icenowy Zheng <icenowy@aosc.io>	2022-01-22 11:45:49 +08:00
vacajk	e9d4d9066a	xilinx_zcu106: add DDR4 interface and fix reset error	2022-01-22 03:08:21 +08:00
Tim Callahan	e0c4c0fe39	Add openocd programmer for Digilent CMOD A7. ... Signed-off-by: Tim Callahan <tcal@google.com>	2022-01-20 20:54:03 -08:00
Gabriel Somlo	834125e978	platforms/digilent_nexys_video: add missing CD pin	2022-01-17 17:11:40 -05:00
enjoy-digital	73b47e9394	Merge pull request #324 from RobertWilbrandt/arrow_usb_blaster ... Use Arrow-USB-Blaster for trenz c10lprefkit	2022-01-17 08:47:47 +01:00
Florent Kermarrec	b240c381a7	colorlight_5a_75b: Comment out eth's rst_n (Prevent CPU boot).	2022-01-17 08:30:10 +01:00