977 commits

Author	SHA1	Message	Date
Florent Kermarrec	74d4a72494	radiona/ulx3s: Rename user_button to user_btn (consistency with other boards) and fix ident.	2022-08-26 22:25:54 +02:00
enjoy-digital	693cce73bd	Merge pull request #417 from Igor542/master ... radiona_ulx3s: add buttons	2022-08-26 22:24:05 +02:00
Gwenhael Goavec-Merou	0c14bbf0dc	sipeed_tang_primer_20k: adding dock lite support	2022-08-26 08:43:57 +02:00
Igor Safonov	9ed3b7baae	radiona_ulx3s: add buttons	2022-08-25 22:19:48 -07:00
Florent Kermarrec	94d079f469	sipeed_tang_nano_4k: Fix tab/space.	2022-08-24 16:07:18 +02:00
enjoy-digital	feff243f8f	Merge pull request #416 from shenki/artix-dc-scm ... Add Antmicro Artix DC-SCM board	2022-08-24 15:22:52 +02:00
enjoy-digital	6ba6a7e8fa	Merge pull request #414 from lambdaconcept/master ... lambdaconcept_ecpix5: fix HDMI pin	2022-08-24 15:14:11 +02:00
Joel Stanley	f48ed3d9e7	Add Antmicro Artix DC-SCM board ... Based on commits by: - Jedrzej Boczar <jboczar@antmicro.com> - Karol Gugala <kgugala@antmicro.com> Tested serial and networking on a DC-SCM with mor1k and vexriscv.	2022-08-24 13:03:36 +10:00
Pierre-Olivier Vauboin	c3e99a8419	lambdaconcept_ecpix5: fix HDMI pin	2022-08-11 18:45:10 +02:00
Chandler Klüser	7487440725	Added Tang Nano 4k Support for GoWin Educational IDE v1.9.8.03	2022-08-05 13:28:22 -03:00
Florent Kermarrec	6872f7ade6	sipeed_tang_primer_20k: Add LCD pins (untested).	2022-08-05 09:42:38 +02:00
Florent Kermarrec	c79d01064e	sipeed_tang_primer_20k: Switch Serial to Dock IOs.	2022-08-05 09:07:20 +02:00
Florent Kermarrec	f2cb211432	sipeed_tang_primer_20k: Add buttons and prepare RGB Led. ... Synthesis issue with WS2812/GowinEDA for now.	2022-08-04 16:32:50 +02:00
Florent Kermarrec	09b0c975f3	sipeed_tang_primer_20k: Add Ethernet/Etherbone (compiles but not yet working).	2022-07-26 12:53:42 +02:00
Florent Kermarrec	abe08a96aa	sipeed_tang_primer_20k: Add Video (Colorbars), compiles but does not seems to be working.	2022-07-26 12:25:10 +02:00
Florent Kermarrec	12b8063941	sipeed_tang_primer_20k: Add LedChaser through 204 pin SODIMM connector/Dock.	2022-07-26 11:44:03 +02:00
Florent Kermarrec	d49e43801e	sipeed_tang_primer_20k: Add 204 Pins SODIMM Connector. ... Will allow defining Dock peripherals.	2022-07-26 11:30:39 +02:00
inc	67ffe095cc	Merge branch 'master' of https://github.com/machdyne/litex-boards	2022-07-15 17:13:22 +02:00
inc	22dcadcfa1	rename ld board prefix to machdyne	2022-07-15 17:13:00 +02:00
Machdyne	9deef65445	Merge branch 'litex-hub:master' into master	2022-07-14 16:02:00 +02:00
enjoy-digital	52ff93a194	Merge pull request #409 from antmicro/rrozak/remove-dm-pins-from-datacenter ... Remove DM signals assignment from DDR4 Datacenter platform	2022-07-11 19:34:19 +02:00
Ryszard Różak	2357212161	Remove DM signals assignment from DDR4 Datacenter platform ... Data Masks (DM) are unsupported on x4 devices and wrong pins were assigned. Signed-off-by: Ryszard Różak <rrozak@antmicro.com>	2022-07-11 12:29:02 +02:00
Machdyne	3ecec8cd16	Merge branch 'litex-hub:master' into master	2022-07-08 16:59:55 +02:00
inc	756d019571	add support for schoko	2022-07-08 16:58:55 +02:00
Florent Kermarrec	6b02ea024a	ti60_f225_dev_kit: Fix ethernet build and enable debug. Now needs testing.	2022-06-28 19:54:00 +02:00
Florent Kermarrec	c14611b07c	ti60_f225_dev_kit: Add dummy 0 pin to connectors to use schematic numbering (1-40).	2022-06-27 19:47:19 +02:00
Robert Szczepanski	1ad2022138	quicklogic_quickfeather: Move from deprecated Symbiflow to F4PGA	2022-06-17 17:00:48 +02:00
Florent Kermarrec	29b72fac7e	taobao_a_e115fb: Minor cleanups.	2022-06-15 11:55:22 +02:00
Florent Kermarrec	0ae1417eb5	a_e115fb: Add taobao prefix (Similar to what we do on aliexpress's boards from unknown vendors).	2022-06-15 11:53:11 +02:00
enjoy-digital	4e0e381f47	Merge pull request #398 from Icenowy/a-e115fb ... a_e115fb: new board	2022-06-15 11:37:36 +02:00
Icenowy Zheng	13fbcbb159	a_e115fb: new board ... It's a core board with EP4CE115 by a random vendor on Taobao. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-06-13 23:13:29 +08:00
Florent Kermarrec	c420429a3c	efinix_ti60_f225: Add the 3 QSE connectors and add RGMII Ethernet QSE extension board.	2022-06-13 16:01:28 +02:00
enjoy-digital	d37af4aece	Merge pull request #395 from AEW2015/master ... Support for "discontinued" Avnet aes-ku040-db-g development board	2022-06-07 12:13:47 +02:00
AEW2015	313e758ffe	Updated copywrite and renamed to avnet_aesku40	2022-06-03 20:49:52 -06:00
Florent Kermarrec	6e33d9249f	sipeed_tang_primer_20k: Cleanup/Fix.	2022-06-03 11:40:10 +02:00
enjoy-digital	68733c6e92	Merge pull request #396 from Icenowy/tang20k ... sipeed_tang_primer_20k: new board	2022-06-03 10:14:55 +02:00
Icenowy Zheng	b97d9cd9e8	sipeed_tang_primer_20k: new board ... Only initial support is added. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2022-06-03 00:24:20 +08:00
Andrew E Wilson	4d98dd38a7	Merge branch 'litex-hub:master' into master	2022-06-01 23:01:43 -06:00
Andwer E Wilson	1b96067113	added aesku40 dev board	2022-06-01 22:54:03 -06:00
enjoy-digital	48353735fa	Merge pull request #393 from swetland/ethernet ... muselab icesugar pro: add ethernet/etherbone support	2022-05-20 22:10:02 +02:00
Brian Swetland	5a714167ed	muselab icesugar pro: add ethernet/etherbone support ... - use P4 header for a waveshare ethernet phy module - add --with-ethernet, --with-etherbone, --eth-ip, and --eth-dynamic-ip target configuration options	2022-05-19 14:46:09 -07:00
Hans Baier	2214c7baec	enclustra_mercury_kx2: remove useless clk100, because it is not connected to a clock pin	2022-05-20 04:42:06 +07:00
Hans Baier	f1e021cbbe	enclustra_mercury_kx2: add clk100, leds, base board serial, DDR3 termination, DDR3 voltage setting	2022-05-19 15:41:44 +07:00
enjoy-digital	64773b4085	Merge pull request #390 from hansfbaier/hpc-xc7k420t ... HPC Store xc7k420t	2022-05-16 11:20:15 +02:00
minexo79	efa5740811	Move HDMI Support From Sipeed Tang Nano 4K.	2022-05-15 10:53:09 +08:00
Hans Baier	26c0f546c7	Merge branch 'litex-hub:master' into hpc-xc7k420t	2022-05-14 21:40:12 +07:00
Hans Baier	006b54e7ea	Get 3 DDR modules working with Vivado	2022-05-14 21:38:25 +07:00
enjoy-digital	ee58e5dbc7	Merge pull request #388 from swetland/hdmi ... muselab: icesugarpro: fix HDMI output	2022-05-12 15:09:03 +02:00
Hans Baier	f383ad3938	Support HPC Store XC7K420T board	2022-05-12 12:55:46 +07:00
Hans Baier	d1096a2cd0	Add HPC Store XC7K420T board	2022-05-11 08:58:50 +07:00
Florent Kermarrec	0ce7f8354c	Add initial LimeSDR Mini V2 support (With SoC + USB3 (FT245PHYSynchronous)). ... python3 -m litex_boards.targets.limesdr_mini_v2 --csr-csv=csr.csv --build --load litex_server --jtag --jtag-config=openocd_limesdr_mini_v2.cfg litex_term crossover __ _ __ _ __ / / (_) /____ | |/_/ / /__/ / __/ -_)> < /____/_/\__/\__/_/|_| Build your hardware, easily! (c) Copyright 2012-2022 Enjoy-Digital (c) Copyright 2007-2015 M-Labs BIOS built on May 3 2022 18:59:46 BIOS CRC passed (5f29afcc) LiteX git sha1: a4cc859d --=============== SoC ==================-- CPU: VexRiscv @ 80MHz BUS: WISHBONE 32-bit @ 4GiB CSR: 32-bit data ROM: 128KiB SRAM: 8KiB --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely. sL5DdSMmkekro Timeout No boot medium found --============= Console ================-- litex> ident Ident: LiteX SoC on LimeSDR-Mini-V2 2022-05-03 18:59:29	2022-05-03 19:04:06 +02:00
Brian Swetland	ec220e4b5b	muselab: icesugarpro: fix HDMI output ... - enable data_n outputs - use drive_both property of updated VideoHDMIPHY to drive both differential outputs - adjust default clocking to successfully close timing (sysclk at 50Mhz, HDMI at 25MHz, HDMIx5 at 125MHz)	2022-05-03 04:04:26 -07:00
Florent Kermarrec	3ebc9877ad	1bitsquared_icebreaker: Rename to icebreaker (Python does not like number as prefix for imports).	2022-05-02 13:20:40 +02:00
Florent Kermarrec	9914478854	xilinx_ac701: Add SPI-Flash support.	2022-04-28 11:05:51 +02:00
Florent Kermarrec	ae8bdb74a9	xilinx_kc705: Add SPI-Flash support.	2022-04-28 10:27:54 +02:00
Florent Kermarrec	68ea5fe057	platforms/colorlight_5a_75b/v7_0: Comment rst_n to avoid deadlock on reboot command.	2022-04-25 18:50:17 +02:00
Florent Kermarrec	39a314cdae	Rename aliexpress_u420t to aliexpress_xc7k420t.	2022-04-21 14:28:26 +02:00
enjoy-digital	06396a2cb6	Merge pull request #384 from hansfbaier/qmtech-ep4cgx150 ... add board support for QMTech EP4CGX150	2022-04-21 10:36:51 +02:00
Florent Kermarrec	b2a346edc8	aliexpress_u420t: Review/Simplify. ... Specific integrated ROM/SRAM/MAIN_RAM size can be passed through command line parameters.	2022-04-21 10:32:18 +02:00
Florent Kermarrec	3e9e970076	Add aliexpress prefix to boards from aliexpress that seem to be from the same unknown vendor.	2022-04-21 10:06:11 +02:00
enjoy-digital	8c51cb12c8	Merge pull request #383 from sysmanalex/master ... Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board	2022-04-21 10:02:05 +02:00
Hans Baier	b41d72e1d0	add board support for QMTech EP4CGX150	2022-04-16 06:36:24 +07:00
Florent Kermarrec	23b1b15486	Add initial/minimal Pluto SDR support.	2022-04-14 12:13:03 +02:00
Alex Petrov	1e00a43fdd	board u420t kintex update v0.2	2022-04-13 00:12:59 +03:00
Alex Petrov	89570b005c	Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board	2022-04-12 22:38:14 +03:00
Florent Kermarrec	b99d788732	fairwaves/xtrx: Update with xtrx_julia improvements.	2022-04-12 17:42:52 +02:00
Florent Kermarrec	dd27a3473b	platforms: Add LambdaConcept's PCIe Screamer/M2.	2022-04-01 11:41:07 +02:00
Florent Kermarrec	867489d855	xilinx_zcu106: Add PCIe Gen3 X4 support.	2022-04-01 10:01:06 +02:00
Franck Jullien	299d4d66d6	efinix: ti60f225 add MIPI RX	2022-03-29 15:29:59 +02:00
enjoy-digital	13e5062793	Merge pull request #379 from chmousset/add_t8_devkit ... [enh] added efinix t8f81 dev kit	2022-03-28 14:58:21 +02:00
enjoy-digital	e6a9f44580	Merge pull request #378 from antmicro/add-missing-peripherals ... DDR4 datacenter: add missing peripherals	2022-03-28 14:40:22 +02:00
enjoy-digital	83d7c3fb39	Merge pull request #377 from Johnsel/arduino_mkrvidor4000 ... Board support for Arduino MKR Vidor 4000	2022-03-28 14:34:59 +02:00
Charles-Henri Mousset	7a68dcc79b	[enh] added efinix t8f81 dev kit	2022-03-26 09:52:20 +01:00
Alessandro Comodi	33516a40f4	antmicro_datacenter: add missing peripherals ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-25 13:49:41 +01:00
Alessandro Comodi	77cb866233	antmicro_datacenter: add HDMI output ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-25 10:03:07 +01:00
John Simons	501c50ff79	Fixed serial port comments hinting the correct pins.	2022-03-24 08:04:47 -07:00
John Simons	901942bda6	Cleanup for pushing. This commit combined with my litedram fork produces a running basic SoC + bios --=============== SoC ==================-- ... CPU:BUS:E 32-bit @ 4GiB CSR:16-bit @ 48MT/s (CL-2 CWL-2) --========== Initialization ============-- Initializing SDRAM @0x40000000... Switching SDRAM to software control. Switching SDRAM to hardware control. Memtest at 0x40000000 (2.0MiB)... Write: 0x40000000-0x40200000 2.0MiB Read: 0x40000000-0x40200000 2.0MiB Memtest OK Memspeed at 0x40000000 (Sequential, 2.0MiB)... Write speed: 13.6MiB/s Read speed: 21.3MiB/s --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely.	2022-03-24 07:39:14 -07:00
Hans Baier	e445c9ec71	qmtech_5cefa2: make serial pins consistent with other boards	2022-03-24 18:52:28 +07:00
Sylvain Munaut	bcedf573e0	adi_adrv2crr: Add IO definition for the AD9545 reset line ... We use PULLUP on it so that the AD9545 is by default held out of reset without the user having to do anything ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-23 20:42:30 +01:00
Sylvain Munaut	cdb78efd3c	adi_adrv2crr: Document I2C devices attached ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-23 20:42:30 +01:00
Sylvain Munaut	6c31f16df2	adi_adrv2crr: Fix I2C signal assignement ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-23 20:42:30 +01:00
Florent Kermarrec	73458ae9d7	decklink_quad_hdmi_recorder: Add Serial/UART pins.	2022-03-23 11:08:51 +01:00
enjoy-digital	d399f33dda	Merge pull request #374 from smunaut/adrv2crr ... adi_adrv2crr: Upgrade part to speedgrade 2	2022-03-23 09:09:57 +01:00
Sylvain Munaut	dc92584681	adi_adrv2crr: Upgrade part to speedgrade 2 ... Even though the schematic and bom call for speedgrade 1, this was only for the prototypes. All productions units have been updated to speedgrade 2. See this thread: https://ez.analog.com/fpga/f/q-a/112356/adrv9009-zu11eg-speed-grade And the official HDL project for the board: https://github.com/analogdevicesinc/hdl/blob/master/projects/adrv9009zu11eg/adrv2crr_fmc/system_project.tcl#L16 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-22 23:36:41 +01:00
Goran Mahovlic	68c23e9251	faster sdcard boot on 2.0	2022-03-22 17:54:12 +01:00
John Simons	b8b0aead28	Added basic support for Arduino MKR Vidor 4000	2022-03-21 18:54:29 -07:00
Florent Kermarrec	3ebad7f7cc	gsd_orangecrab/butterstick: Add assert on devices.	2022-03-18 10:44:21 +01:00
Florent Kermarrec	9faa805ab9	alinx_ax7010: Review/Cleanup.	2022-03-17 11:31:02 +01:00
enjoy-digital	3aa1042f5f	Merge pull request #367 from ggangliu/zynq_xc7z010 ... Add ALINX AX7010 board support	2022-03-17 09:52:04 +01:00
Florent Kermarrec	0f82db26da	rcs_artic_term_bmc_card: Fix is -> ==.	2022-03-17 09:45:47 +01:00
Yonggang Liu	0e7145b4a1	Update and rename xilinx_alinx_ax7010.py to alinx_ax7010.py	2022-03-17 11:21:42 +08:00
Florent Kermarrec	0745162a29	xilinx_zcu102: Review/Cleanup for consistency with others boards. ... Also remove INTERNAL_VREF constraints that are not yet useful (required for DRAM).	2022-03-16 18:47:05 +01:00
Joseph Faye	f4a48e51d7	add xilinx_zcu102 platform	2022-03-16 15:37:02 +01:00
Yonggang Liu	5365c7fce4	Rename xilinx_zynq_xc7z010.py to xilinx_alinx_ax7010.py	2022-03-15 15:50:09 +08:00
Yonggang Liu	4159faf48b	Add files via upload ... Adding zynq_xc7z010 board support	2022-03-12 12:20:54 +08:00
Robert Szczepanski	688377de7c	lpddr4_test_board: Fix button pin	2022-03-11 15:59:43 +01:00
enjoy-digital	3b74673a93	Merge pull request #363 from curliph/master ... add Gowin programmer support	2022-03-08 17:26:50 +01:00
Florent Kermarrec	f52a915487	lambdaconcept_ecpix5: Add initial Video support at 640x480 (with Terminal/Framebuffer). ... I2C intialization code adapted from https://github.com/ultraembedded/ecpix-5. Tested with: - python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-terminal --build --load - python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-framebuffer --build --load __ _ __ _ __ / / (_) /____ | |/_/ / /__/ / __/ -_)> < /____/_/\__/\__/_/|_| Build your hardware, easily! (c) Copyright 2012-2022 Enjoy-Digital (c) Copyright 2007-2015 M-Labs BIOS built on Mar 8 2022 15:34:22 BIOS CRC passed (c7fe9ecd) Migen git sha1: ac70301 LiteX git sha1: 7ebc7625 --=============== SoC ==================-- CPU: FireV-STANDARD @ 75MHz BUS: WISHBONE 32-bit @ 4GiB CSR: 32-bit data ROM: 128KiB SRAM: 8KiB L2: 8KiB SDRAM: 524288KiB 16-bit @ 300MT/s (CL-6 CWL-5) --========== Initialization ============-- Initializing SDRAM @0x40000000... Switching SDRAM to software control. Read leveling: m0, b00: |01110000| delays: 02+-01 m0, b01: |00000000| delays: - m0, b02: |00000000| delays: - m0, b03: |00000000| delays: - best: m0, b00 delays: 02+-01 m1, b00: |01110000| delays: 02+-01 m1, b01: |00000000| delays: - m1, b02: |00000000| delays: - m1, b03: |00000000| delays: - best: m1, b00 delays: 02+-01 Switching SDRAM to hardware control. Memtest at 0x40000000 (2.0MiB)... Write: 0x40000000-0x40200000 2.0MiB Read: 0x40000000-0x40200000 2.0MiB Memtest OK Memspeed at 0x40000000 (Sequential, 2.0MiB)... Write speed: 13.6MiB/s Read speed: 23.4MiB/s --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely. sL5DdSMmkekro Timeout No boot medium found --============= Console ================-- litex> ident Ident: LiteX SoC on ECPIX-5 2022-03-08 15:34:19	2022-03-08 15:40:52 +01:00
curliph	6eb906a2ca	Update sipeed_tang_nano_9k.py ... add Gowin programmer support	2022-03-08 14:00:53 +08:00
curliph	4c9bc53a3c	add Win/powershell and WSL support	2022-03-08 13:24:56 +08:00
Florent Kermarrec	cadfde4d39	litex_acorn_baseboard: Add SerDes refclk and m2_tx/rx pins.	2022-03-07 18:41:53 +01:00
enjoy-digital	50cc75fd56	Merge pull request #361 from smunaut/adrv2crr ... adi_adrv2crr: Add support for the ADI ADRV2CRR with ADRV9009-ZU11EG SoM	2022-03-07 09:24:36 +01:00
Florent Kermarrec	37783ff9fd	colorlight_5a_75e: Fix _connectors_v6_0/j16 first pin (thanks @WhichWayWazzit).	2022-03-07 09:16:07 +01:00
Sylvain Munaut	ec28ca8fa3	adi_adrv2crr: Add support for the ADI ADRV2CRR with ADRV9009-ZU11EG SoM ... This is a carrier board with a SoM mounted on it. There is also an FMC connector that can accept another AD-FMCOMMS8-EBZ to get two more ADRV9009 RFIC but support for that is not added yet. Note that the PCIe support requires : - Change the .xci in the litepcie to use the right Quad - Revert litex 3c34039b731b42e27e2ee6c8e399e5eb8f3a058f so the timing constrainst of litepcie apply correctly Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2022-03-03 22:17:09 +01:00
Alessandro Comodi	7933e9462e	antmicro_datacenter: fix i2c pads assignment ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-01 16:35:15 +01:00
Florent Kermarrec	7a5fe4c221	efinix_titanium_ti60_f225_dev_kit: Update iobank_info with the values used in the video example design.	2022-03-01 14:01:43 +01:00
Alessandro Comodi	db2d83ea29	antmicro_datacenter: use 100 MHz and add i2c master ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2022-03-01 13:00:36 +01:00
Piotr Binkowski	d6fddc746f	antmicro_datacenter: use single rank configuration	2022-03-01 12:43:08 +01:00
Piotr Binkowski	37905d1f34	antmicro_datacenter: use correct DQS pins	2022-03-01 12:43:08 +01:00
Karol Gugala	73b5143cec	antmicro_datacenter: add DCI_CASCADE ... Signed-off-by: Karol Gugala <kgugala@antmicro.com>	2022-03-01 12:43:08 +01:00
Florent Kermarrec	0ceb15938f	digilent_arty_z7: Remove fake serial.	2022-03-01 11:05:59 +01:00
Florent Kermarrec	673676e3cb	digilent_arty_a7: Switch to VivadoProgrammer.	2022-03-01 10:48:22 +01:00
Florent Kermarrec	e16e5e0591	digilent_arty_z7: Fix add_period_constraint.	2022-03-01 10:30:14 +01:00
Dave Berkeley	c9d009c735	Add ColorLight i9 v7.2	2022-02-28 14:08:49 +00:00
enjoy-digital	11dfe225fa	Merge pull request #356 from fjullien/add_mipi_tx ... efinix: add MIPI TX to platform Ti60	2022-02-25 16:53:11 +01:00
Franck Jullien	c54e92c47d	efinix: add MIPI TX to platform Ti60	2022-02-25 15:15:14 +01:00
inc	2311db18f8	add initial support for kröte fpga board	2022-02-25 14:22:19 +01:00
Florent Kermarrec	b1550f006a	stlv3225: Minor Review/Cleanup, switch to JTAG HS2 programmer.	2022-02-24 17:17:08 +01:00
Andrew Gillham	174d958ca7	Initial support for STLV7325 Kintex-7 board.	2022-02-23 18:28:55 +01:00
enjoy-digital	6661947d96	Merge pull request #354 from madscientist159/master ... Add initial support for RCS Arctic Tern boards	2022-02-23 18:06:08 +01:00
Raptor Engineering Development Team	ae4b3c0938	Add initial support for RCS Arctic Tern boards	2022-02-21 20:04:51 -06:00
Ilia Sergachev	85397818d9	add Xilinx ZCU216 support	2022-02-21 19:14:13 +01:00
Florent Kermarrec	7d84e6e863	efinix_titanium_ti60_t225: Add SPI/Native SDCard support. ... Both modes working with 8559b88ad8.	2022-02-21 10:35:06 +01:00
Florent Kermarrec	08a79fa3ac	lattice_ecp5_vip: Minor cleanups, fix CI.	2022-02-15 10:58:38 +01:00
enjoy-digital	30afe26669	Merge pull request #348 from hubmartin/ecp5-vip ... Draft: Add Lattice ECP5 VIP board + HDMI output board support	2022-02-15 08:53:57 +01:00
enjoy-digital	896884dd21	Merge branch 'master' into axu2cga_software	2022-02-15 08:21:29 +01:00
Florent Kermarrec	3f58df9974	platforms/targets: Fix typos.	2022-02-14 17:26:46 +01:00
Florent Kermarrec	b53b79821e	platforms: Expose toolchain parameter on all platforms to ease switching to alternative/open-source toolchains.	2022-02-14 11:35:18 +01:00
Florent Kermarrec	12b91eccdc	digilent_arty: Remove yosys+nextpnr INTERNAL_VREF constraint skip (now directly done in LiteX).	2022-02-14 10:45:29 +01:00
Gwenhael Goavec-Merou	50654f1b7b	platforms/alinx_axu2cga: add zynqmp PS configuration params	2022-02-12 18:19:55 +01:00
hubmartin	27b03df886	Add Lattice ECP5 VIP board + HDMI output board support	2022-02-08 21:47:58 +01:00
Arusekk	5d52bc5461	Fix seven_seg pin assignment in DE1-SoC ... Fixes quartus build error: ``` Error (171016): Can't place node "seven_seg5[6]" -- illegal location assignment PIN_AA2 File: /home/arusekk/src/fpga-proj/build/de1soc/gateware/de1soc.v Line: 49 ```	2022-02-08 09:03:53 +01:00
Florent Kermarrec	18e8bec9d4	xilinx/kv260: Minor cleanup and add Build/Use instructions (from PR).	2022-02-07 08:12:43 +01:00
Ilia Sergachev	1d8c3789af	add Xilinx KV260 support	2022-02-06 14:38:57 +01:00
Florent Kermarrec	7f4d464f1b	trellisboard: Add Video Terminal/Framebuffer support and use new I2C init feature to automatically configure TP410 at startup.	2022-02-02 09:52:12 +01:00
Jevin Sweval	fbd424fc48	DECA: Add Ethernet and Etherbone support ... Also fixed pcf_en IO standard compared to golden Arrow project.	2022-01-29 15:15:53 -08:00
Gwenhael Goavec-Merou	dd134a4b7d	digilent arty z7: allows toolchain selection (PL only)	2022-01-26 07:30:06 +01:00
Gwenhael Goavec-Merou	537f04a13d	alinx_axu2gca: new board ... Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>	2022-01-25 07:35:42 +01:00
Victor Suarez Rovere	db77ea5c7a	Add tweaks to Arty board to support yosys+nextpnr toolchain	2022-01-24 02:06:34 -03:00
enjoy-digital	787f44e7d9	Merge pull request #336 from tcal-x/cmod-a7-flash ... Digilent CMOD A7: add flash support.	2022-01-23 08:36:49 +01:00
Tim Callahan	6567af6f49	Digilent CMOD A7: add flash support. ... Add both "--flash" and "--with-spi-flash"; tested on board. 4MB flash mapped at 0x00400000. Signed-off-by: Tim Callahan <tcal@google.com>	2022-01-22 18:50:12 -08:00
Icenowy Zheng	f533e7f8ba	sipeed_tang_nano_9k: enable copackaged PSRAM ... Also enable SPI SDCard which was pending by the lack of main_ram previously. Signed-off-by: Icenowy Zheng <icenowy@aosc.io>	2022-01-23 03:37:03 +08:00
Florent Kermarrec	e35b9b439f	platforms/sipeed_tang_nano_9k: Fix copyrights and remove board diagram/description of the 4k.	2022-01-22 15:55:36 +01:00
enjoy-digital	999dbd572f	Merge pull request #334 from Icenowy/tang9k ... sipeed_tang_nano_9k: new board	2022-01-22 15:49:08 +01:00
Icenowy Zheng	e699c377a5	sipeed_tang_nano_9k: new board ... Signed-off-by: Icenowy Zheng <icenowy@aosc.io>	2022-01-22 11:45:49 +08:00
vacajk	e9d4d9066a	xilinx_zcu106: add DDR4 interface and fix reset error	2022-01-22 03:08:21 +08:00
Tim Callahan	e0c4c0fe39	Add openocd programmer for Digilent CMOD A7. ... Signed-off-by: Tim Callahan <tcal@google.com>	2022-01-20 20:54:03 -08:00
Gabriel Somlo	834125e978	platforms/digilent_nexys_video: add missing CD pin	2022-01-17 17:11:40 -05:00
enjoy-digital	73b47e9394	Merge pull request #324 from RobertWilbrandt/arrow_usb_blaster ... Use Arrow-USB-Blaster for trenz c10lprefkit	2022-01-17 08:47:47 +01:00
Florent Kermarrec	b240c381a7	colorlight_5a_75b: Comment out eth's rst_n (Prevent CPU boot).	2022-01-17 08:30:10 +01:00
Florent Kermarrec	b33deba2ed	platforms: Remove useless symbiflow import.	2022-01-17 08:25:00 +01:00
Robert Wilbrandt	00c9cf1d6e	Use Arrow-USB-Blaster for trenz c10lprefkit	2022-01-16 18:03:40 +01:00
Bastian Löher	38bff921b2	Fixup.	2022-01-16 13:00:46 +01:00
Bastian Löher	bccbd95526	digilent_cmod_a7: Propagate variant and toolchain	2022-01-16 11:31:08 +01:00
Florent Kermarrec	296c99f065	digilent_pynq_z1: Do minor cosmetic cleanups.	2022-01-14 09:39:42 +01:00
Florent Kermarrec	45cfe2be6b	qmtech_ecp4ce15/ecp4ce55: Merge in qmtech_ecp4cex5. ... Defaults to ecp4ce15, ecp4ce55 can be selected with --variant=ecp4ce55.	2022-01-14 09:33:29 +01:00
enjoy-digital	830757502f	Merge pull request #321 from r4d10n/master ... Support for Digilent Pynq Z1	2022-01-14 08:48:26 +01:00
Rakesh Peter	e489c3e3de	Change Serial port to pmoda:0/1 ... Remove usb_uart. Copyright notice update.	2022-01-13 23:24:50 +05:30
Florent Kermarrec	e27d49114f	Add initial and minimal ZCU106 support (with Clk/Leds/UART).	2022-01-13 17:40:03 +01:00
Rakesh Peter	bd95ce5e47	Create digilent_pynq_z1.py	2022-01-11 19:31:33 +05:30
Alastair M. Robinson	c57ea732dd	Added QMTech EP4CE55 board - almost identical to EP4CE15 board but bigger FPGA.	2022-01-07 19:27:40 +00:00
enjoy-digital	3ebbebe750	Merge pull request #319 from antmicro/datacenter-updates ... antmicro-datacenter updates	2022-01-07 11:03:30 +01:00
Florent Kermarrec	a4130556ac	gsd_butterstick: Add optional SYZYGY GPIO (--with-syzygy-gpio) to expose the 32 GPIOs on SYZYGY breakout board.	2022-01-06 18:37:42 +01:00
Karol Gugala	86b9b1b56c	antmicro_datacenter: fix clock pin LOC	2022-01-06 17:38:49 +01:00
Florent Kermarrec	28cdc8b914	spartan_edge_accelerator: Review/Simplify.	2022-01-06 09:37:46 +01:00
Florent Kermarrec	2c6ce12154	spartan_edge_accelerator: Add seeedstudio prefix and seeedsstudio to vendors list.	2022-01-06 09:06:27 +01:00
enjoy-digital	1ee619a455	Merge pull request #317 from primeshp/spartanacc ... Spartan Edge Accelerator Board support	2022-01-06 09:03:02 +01:00
Matthew Brooks	6b0bd4da4d	fix(vc707): fix 'dat' typo	2022-01-05 20:02:07 -08:00
Florent Kermarrec	9ad1723ac1	efinix_titanium_ti60_f225_dev_kit: Cleanup HyperRAM IOs.	2022-01-04 15:52:42 +01:00
Primesh	713ae531f6	Add Spartan Edge Accelerator support	2022-01-03 16:31:13 -05:00
enjoy-digital	059563245d	Merge pull request #314 from sergachev/zedboard ... LiteX BIOS on Zedboard	2022-01-03 17:59:22 +01:00
Florent Kermarrec	c9816f2bc1	snicker_doodle: Add z7-10/z7-20 variants support.	2022-01-03 17:15:27 +01:00
Florent Kermarrec	dc61d383e6	snickerdoodle: Rename to krtkl_snicker_doodle and do minor cosmetic changes.	2022-01-03 17:09:17 +01:00
enjoy-digital	b48d96c40d	Merge pull request #309 from derekmulcahy/master ... Initial release for Snickerdoodle	2022-01-03 16:46:14 +01:00
enjoy-digital	fae2cecf93	Merge pull request #315 from hubmartin/master ... Fix cannot find board 'littlebee'	2022-01-03 16:09:12 +01:00
enjoy-digital	3dd85d9afb	Merge pull request #313 from fjullien/add_io_to_t120 ... efinix: add clock pins to t120 bga576 platform	2022-01-03 16:07:54 +01:00
hubmartin	064406e2f6	Merge branch 'master' of github.com:hubmartin/litex-boards	2021-12-27 21:08:13 +01:00
hubmartin	b98d76ff39	Fix cannot find board bug	2021-12-27 21:07:16 +01:00
derekmulcahy	2a6282273f	Merge branch 'litex-hub:master' into master	2021-12-24 22:19:33 -05:00
Florent Kermarrec	b5008a2d5c	platforms/radiona_ulx3s: Use specific GPDI mapping for 1.7/2.0 revision. ... Data channels 0/2 are swapped between revisions.	2021-12-23 10:39:58 +01:00
Ilia Sergachev	43a1e13b53	zedboard: compress bitstream, derive default clk f	2021-12-22 03:13:30 +01:00
Ilia Sergachev	166451e65e	zedboard: remove fake serial	2021-12-22 03:12:48 +01:00
Franck Jullien	379745b039	efinix: add clock pins to t120 bga576 platform	2021-12-21 12:34:19 +01:00
Derek Mulcahy	15ea01197d	Added placeholder clk/led/uart.	2021-12-20 21:12:46 -05:00
derekmulcahy	d64207f8b6	Merge branch 'litex-hub:master' into master	2021-12-20 17:35:35 -05:00
Gwenhael Goavec-Merou	bb92bb00a8	adding digilent_arty_z7 support	2021-12-20 18:02:57 +01:00
derekmulcahy	4c76e12932	Merge branch 'litex-hub:master' into master	2021-12-20 10:54:09 -05:00
Franck Jullien	f18c1a033c	Efinix: ti60: add HyperRAM support	2021-12-17 10:23:10 +01:00
Derek Mulcahy	1c87c391c4	Initial release for Snickerdoodle	2021-12-14 16:00:42 -05:00
Florent Kermarrec	179e9090d1	Rename efinix_titanium_ti60_bga225_dev_kit to efinix_titanium_ti60_f225_dev_kit and also exclude it from tested platforms/targets.	2021-12-13 15:54:56 +01:00
enjoy-digital	4a9828c506	Merge pull request #305 from fjullien/efinix_titanium ... efinix: add titanium Ti60 dev kit	2021-12-13 15:45:55 +01:00
Franck Jullien	e84f32b918	efinix: add titanium Ti60 dev kit	2021-12-13 09:37:14 +01:00
Gwenhael Goavec-Merou	2df10f278f	platforms/redpitaya: fix DAC pins	2021-12-12 15:55:31 +01:00
Franck Jullien	338abb4e0c	efinix: add bank voltage configuration to platforms	2021-12-08 18:10:22 +01:00
enjoy-digital	9119250276	Merge pull request #300 from tilk/de1_soc ... Better support for DE1-SoC	2021-12-08 06:18:25 +01:00
enjoy-digital	2b7587632f	Merge pull request #299 from gregdavill/butterstick-updates ... Butterstick updates	2021-12-08 06:16:29 +01:00
Florent Kermarrec	8ad89881c2	fairwaves_xtrx: Add pcie_x2 definitions and switch to it.	2021-12-07 15:27:55 +01:00
Florent Kermarrec	df175c5750	efinix_trion_t20_mipi_dev_kit: Add clk26.	2021-12-07 15:27:18 +01:00
Greg Davill	59d487f9fb	butterstick: Add pullup on sdcard_cd	2021-12-07 14:32:13 +10:30
Marek Materzok	1d5bbb4c7f	Fix loading bitstream for DE1-SoC	2021-12-05 20:16:10 +01:00
Marek Materzok	90c9696c73	LED, buttons, GPIOs etc. for DE1-SoC	2021-12-05 20:16:00 +01:00
Greg Davill	fd2ec534a7	butterstick: Add extra pins	2021-12-05 20:33:28 +10:30
Greg Davill	61b0dfe63c	butterstick: Add additional SYZYGY connectors	2021-12-04 17:02:36 +10:30
Florent Kermarrec	b3175e4a9c	fairwares_xtrx: Generate Fallback/Operational bitstreams.	2021-11-26 16:20:44 +01:00
Florent Kermarrec	2555fdff91	fairwaves_xtrx: Add SPIFlash, I2C, GPS, I2C, AUX, RF-Switches, RF-IC IOs.	2021-11-26 16:00:07 +01:00
enjoy-digital	fe14e16c1b	Merge branch 'master' into tang_primer	2021-11-23 19:04:09 +01:00
Miodrag Milanovic	b0dcd96964	added comments	2021-11-23 14:58:08 +01:00
Miodrag Milanovic	0b7fabb864	FireAnt board support	2021-11-23 14:43:52 +01:00
Miodrag Milanovic	2cc322e65d	Add initial support for Tang Primer board	2021-11-22 19:10:11 +01:00
enjoy-digital	b1817af8a8	Merge pull request #294 from antmicro/fix-ddr4-datacenter-platform ... platforms: ddr4 datacenter: invert eth clocks	2021-11-21 19:11:13 +01:00
Florent Kermarrec	3e9e9bc425	platforms/sqrl_acorn: Add Multiboot Operational/Fallabck bistreams generation. ... To allow recovery in case of PCIe update failure (Write error, power issue or crash).	2021-11-21 19:10:21 +01:00
Alessandro Comodi	fa26b126df	platforms: ddr4 datacenter: invert eth clocks ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2021-11-16 12:55:50 +01:00
Hans Baier	2272962315	qmtech_10cl001: fix wrong sdram clock pin	2021-11-15 09:54:17 +07:00
Florent Kermarrec	06bae58f48	efinix_trion_t120_bga576: Do a bit a of cleanup on LPDDR3 now that working.	2021-11-12 19:43:28 +01:00
Gwenhael Goavec-Merou	648d38da7e	quicklogic_quickfeather: add button and GPIOIn ... Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>	2021-11-12 13:21:00 +01:00
Florent Kermarrec	b6c5a85b98	Add initial Efinix Trion T20 MIPI Dev Kit support: CPU, ROM, RAM, UART and SPI Flash. ... Tested with: ./efinix_trion_t20_mipi_dev_kit.py --with-spi-flash --build --load __ _ __ _ __ / / (_) /____ | |/_/ / /__/ / __/ -_)> < /____/_/\__/\__/_/|_| Build your hardware, easily! (c) Copyright 2012-2021 Enjoy-Digital (c) Copyright 2007-2015 M-Labs BIOS built on Nov 12 2021 08:37:48 BIOS CRC passed (2bec12a3) Migen git sha1: 7507a2b LiteX git sha1: f679992f --=============== SoC ==================-- CPU: VexRiscv @ 100MHz BUS: WISHBONE 32-bit @ 4GiB CSR: 32-bit data ROM: 128KiB SRAM: 8KiB FLASH: 4096KiB --========== Initialization ============-- Initializing W25Q32JV SPI Flash @0x00400000... Enabling Quad mode... First SPI Flash block erased, unable to perform freq test. Memspeed at 0x400000 (Sequential, 4.0KiB)... Read speed: 2.6MiB/s Memspeed at 0x400000 (Random, 4.0KiB)... Read speed: 1.5MiB/s --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely. sL5DdSMmkekro Timeout No boot medium found --============= Console ================-- litex>	2021-11-12 08:42:10 +01:00
Florent Kermarrec	855fd7e3d7	efinix_trion_t120_bga576_dev_kit: Continue LPDDR3 integration...	2021-11-10 19:40:35 +01:00
Florent Kermarrec	224f527baa	efinix_trion_t120_bga576_dev_kit: Go a bit further in DRAM integration.	2021-11-10 12:07:30 +01:00
Gwenhael Goavec-Merou	040e7b3104	quicklogic_quickfeather: Use initial EOS-S3 support/integration.	2021-11-09 18:59:37 +01:00
Ilia Sergachev	099d947a49	sqrl_acorn: fix vivado cfgbvs and config_voltage warnings	2021-11-07 16:18:22 +01:00
Ilia Sergachev	202b0e3e7d	sqrl_acorn: add option to use vivado programmer	2021-11-07 16:18:00 +01:00
Hans Baier	f0356d8434	QMTech Daughterboard: remove xilinx specific attribute	2021-11-06 10:25:57 +07:00
Hans Baier	ee5638a96b	qmtech-boards: fix serial so that it gets replaced by daughterboard serial correctly	2021-11-06 06:49:25 +07:00
Florent Kermarrec	6e7c76b71e	fairwaves_xtrx: Add clk60 (from USB PHY) as default Clk when no PCIe. ... Fixes CI.	2021-11-05 15:22:55 +01:00
Florent Kermarrec	ceaaf67dfd	Add initial Fairwaves XTRX support (SoC with JTAG-UART and PCIe Gen2 X1).	2021-11-05 14:52:45 +01:00
Hans Baier	0edce3a176	Add support for QMTech 5CEFA2 board (Cyclone V)	2021-11-05 09:53:25 +07:00
Florent Kermarrec	9543b5efae	marble/marble_mini: Add berkeleylab prefix.	2021-11-04 18:42:16 +01:00
enjoy-digital	808befec3b	Merge pull request #283 from yetifrisstlama/master ... add Marble-board platform and target file	2021-11-04 15:20:11 +01:00
enjoy-digital	a4f8f12067	Merge pull request #284 from hansfbaier/master ... QMTech boards: fix swapped RX/TX lines, remove double uart replacer	2021-11-04 15:18:16 +01:00
lapd	d950b3feb5	Use built-int RS232 port ... Signed-off-by: lapd <lapd@soc.one>	2021-11-03 22:50:40 +07:00
Hans Baier	7aa639ac0f	QMTech boards: fix swapped RX/TX lines, remove double uart replacer	2021-11-02 09:34:25 +07:00
Michael Betz	e645eb243b	add marble board platform and target file	2021-10-28 18:41:22 +02:00
Florent Kermarrec	207afb98fc	ego1: Switch to VideoTerminal (LiteVideo is no longer provided by default with LiteX).	2021-10-27 16:29:46 +02:00
Florent Kermarrec	0ac0f9e75d	efinix_xyloni_dev_kit: Switch to openFPGALoader to load bitstream.	2021-10-25 12:49:48 +02:00
Florent Kermarrec	16a629269d	efinix_xyloni_dev_kit: Describe IOs in similar order than the other platforms.	2021-10-22 14:52:38 +02:00
Florent Kermarrec	75fd276dbe	efinix_xyloni_dev_kit: Increase similarities with others boards and make target very similar to iceBreaker/Fomu/TangNano4k.	2021-10-21 11:34:55 +02:00
Florent Kermarrec	dc1328f1a5	efinix_xyloni_dev_kit: Fix copyrights.	2021-10-21 10:12:46 +02:00
Florent Kermarrec	012c1d9705	efinix_trion_t20: Minor changes (move serial to platform, fix platform copyright).	2021-10-21 10:10:35 +02:00
Andrew Dennison	c548b1c1e2	efinix: xyloni dev board basic support ... * This works: efinix_xyloni_dev_kit.py --cpu-type None --build --load --flash * issues with SPIflash - wrong generation for tristates miso mosi for some reason	2021-10-19 11:23:29 +11:00
enjoy-digital	a53f17380f	Merge pull request #271 from antmicro/add-data-center-board ... WIP: boards: added datacenter DDR4 RDIMM tester board	2021-10-18 13:36:37 +02:00
enjoy-digital	a2261a1e9a	Merge pull request #280 from developandplay/master ... Fix tang nano loopback and button	2021-10-16 09:09:39 +02:00
Gwenhael Goavec-Merou	9645a9a310	efinix_trion_xx: append device with timing model	2021-10-16 07:36:06 +02:00
Martin Troiber	a3c7446a2b	Fix tang nano loopback and button	2021-10-16 04:35:23 +02:00
Florent Kermarrec	3730d96709	litex_acorn_baseboard: Add SPIFlash support.	2021-10-15 18:22:08 +02:00
Florent Kermarrec	bdf2848208	platforms/digilent_arty: Avoid commas in spiflash4x.	2021-10-15 18:22:06 +02:00
Miodrag Milanovic	d9638c40b8	Initial support for Efinix Trion T20 BGA256 Dev Kit	2021-10-15 12:26:15 +02:00
Florent Kermarrec	195bf176cf	efinix_trion_t120_bga576: Add SPIFlash support (X1 for now).	2021-10-14 19:16:01 +02:00
Florent Kermarrec	414b3fa636	efinix_trion_t120_bga576: Add Ethernet pins of the 2 RGMII PHYs.	2021-10-14 11:51:17 +02:00
Florent Kermarrec	430918756d	efinix_trion_t120_bga576: Add PMODs connectors and use USB-UART/PMOD_E as Serial.	2021-10-14 10:10:42 +02:00
Florent Kermarrec	9145ff97d2	efinix_trio_t120_bga576: Add Switches pins.	2021-10-14 09:29:12 +02:00
Florent Kermarrec	5b4558c9b9	platforms/efinix_trion_t120_bga576: Add Buttons and Serial (other PMOD USB-UART).	2021-10-13 16:32:58 +02:00
Florent Kermarrec	a4d178a740	Add Efinix Trio T120 BGA576 Dev-Kit initial support (LedChaser).	2021-10-13 12:29:53 +02:00
Florent Kermarrec	e29bcd30a6	litex_acorn_baseboard: Add some M2 signals and set devslp to 0.	2021-10-12 11:54:17 +02:00
Florent Kermarrec	a365362f5d	Rename litex_m2_baseboard to litex_acorn_baseboard and add link to repository.	2021-10-11 18:36:12 +02:00
Florent Kermarrec	fe08491e8d	litex_m2_baseboard: Add LCD.	2021-10-11 18:30:23 +02:00
enjoy-digital	393252ddc9	Merge pull request #277 from hansfbaier/master ... Add support for QMTech 10CL006 board	2021-10-11 14:01:06 +02:00
enjoy-digital	79fe4a9199	Merge pull request #275 from alainlou/master ... rz_easyfpga: cleanup and ease of use	2021-10-11 13:57:06 +02:00
Florent Kermarrec	2b2c7d3d68	trellisboard: Add PMOD GPIO support (for tests with MicroPython).	2021-10-11 11:33:13 +02:00
Hans Baier	d119b598c5	Add support for QMTech 10CL006 board	2021-10-05 12:06:41 +07:00
alainlou	1b676f929a	cleanup and ease of use ... - update README - delete some unnecessary toolchain commands (copied from trenz boards) - use minimal cpu_variant by default when vexriscv is selected	2021-10-03 13:21:45 -04:00
Florent Kermarrec	e8611794b4	Add initial QuickLogic QuickFeather support (Led Chaser). ... Untested.	2021-10-01 10:58:26 +02:00
Florent Kermarrec	1858273945	mnt_rkx7: Add SPI SDCard support.	2021-09-30 18:01:54 +02:00
Florent Kermarrec	9bcae49629	mnt_rkx7: Add I2C (For the SiI9022A).	2021-09-30 15:33:53 +02:00
Florent Kermarrec	4f7c18a503	mnt_rkx7: Add Ethernet/Etherbone support.	2021-09-30 15:14:03 +02:00
Florent Kermarrec	84f0d715ff	mnt_rkx7: Add SDCard support.	2021-09-30 11:34:23 +02:00
Florent Kermarrec	31b404c42f	mng_rkx7: Add SPI Flash support.	2021-09-30 11:29:56 +02:00
Florent Kermarrec	df7fe5687e	Add initial MNT Reform Kintex-7 module (RKX7) support with Clk, UART and DDR3. ... Compiles but untested on hardware.	2021-09-30 11:06:39 +02:00
enjoy-digital	dfa572083a	Merge pull request #273 from ozbenh/wukong-v2 ... Wukong board improvements	2021-09-28 13:22:42 +02:00
Alessandro Comodi	228245075a	boards: added datacenter DDR4 RDIMM tester board ... Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>	2021-09-27 10:15:55 +02:00
Benjamin Herrenschmidt	4a52996106	Wukong board improvements ... This adds support for v2 of the board via a --board-version argument and a way to select the FPGA speed grade via a --speed-grade argument. Note that the speed grade now defaults to -1. QMTech confirmed that V1 of the board were made in two batches, one with -1 and one with -2, while V2 of the board is all -1. So -1 is the safer default. This also fixes the inversion of j10 and j11 and a typo in the pin definition of jp3 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>	2021-09-24 12:13:56 +10:00
enjoy-digital	f18b10d1ed	Merge pull request #249 from Quiddle11/atlys ... Initial Digilent Atlys support	2021-09-23 10:21:49 +02:00
Florent Kermarrec	921c300b50	digilent_atlys: Simplify/Remove entropy... ... Build tested with ./digilent_atlys.py --with-ethernet --build.	2021-09-23 10:17:54 +02:00
alainlou	1333f89ed6	rz_easyfpga: adjust SDRAM clk phase ... - also add 1:2 rate	2021-09-22 00:26:28 -04:00
Alain Lou	610e82d774	Add initial RZ-EasyFPGA support! (#270)	2021-09-21 09:55:22 +02:00
Florent Kermarrec	d5eea94289	sispeed_tang_nano_4k: Avoid IOStandard constraints on HyperRAM (Not present in example designs).	2021-09-20 11:46:10 +02:00
Florent Kermarrec	5190c9c869	sipeed_tang_nano_4k: Initial Video Out support. ... With colorbars for now, need to free up BRAMS for Video Terminal (or finish HyperRAM support).	2021-09-20 09:32:20 +02:00
Florent Kermarrec	376a836583	sipeed_tang_nano: Add SPI Flash, Enable CPU and use new external SPI Flash support from OpenFPGALoader. ... ./sipeed_tang_nano_4k.py --cpu-type=vexriscv --cpu-variant=lite --build --flash __ _ __ _ __ / / (_) /____ | |/_/ / /__/ / __/ -_)> < /____/_/\__/\__/_/|_| Build your hardware, easily! (c) Copyright 2012-2021 Enjoy-Digital (c) Copyright 2007-2015 M-Labs BIOS built on Sep 17 2021 15:54:08 BIOS CRC passed (6cc6de6d) Migen git sha1: a5bc262 LiteX git sha1: 46cd9c5a --=============== SoC ==================-- CPU: VexRiscv_Lite @ 27MHz BUS: WISHBONE 32-bit @ 4GiB CSR: 32-bit data ROM: 64KiB SRAM: 8KiB FLASH: 4096KiB --========== Initialization ============-- Initializing W25Q32 SPI Flash @0x80000000... SPI Flash clk configured to 13 MHz Memspeed at 0x80000000 (Sequential, 4.0KiB)... Read speed: 1.3MiB/s Memspeed at 0x80000000 (Random, 4.0KiB)... Read speed: 521.9KiB/s --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely. sL5DdSMmkekro Timeout No boot medium found --============= Console ================-- litex>	2021-09-17 15:57:55 +02:00
Florent Kermarrec	28571308bc	sispeed_tang_nano: Add simple UART loopback test... (Not working...)	2021-09-16 19:34:48 +02:00
Florent Kermarrec	5955a35372	Add initial Sipeed Tang Nano support (Clk/Leds/Buttons).	2021-09-16 19:22:30 +02:00
Florent Kermarrec	c0aed8a727	litex_m2_baseboard: Add Video Terminal support.	2021-09-16 18:54:50 +02:00
Florent Kermarrec	32a9256f3b	litex_m2_baseboard: Add SDCard support.	2021-09-16 18:17:34 +02:00
Florent Kermarrec	0854a5d234	litex_m2_baseboard: Add Ethernet/Etherbone support.	2021-09-16 18:02:55 +02:00
Florent Kermarrec	8d2f75ca6d	litex_m2_baseboard: Add PMODs connectors.	2021-09-16 17:48:53 +02:00
Florent Kermarrec	3ad0eb6992	Add initial LiteX M2 Baseboard support with Clk/Serial/Buttons.	2021-09-16 17:44:50 +02:00
enjoy-digital	26943959b5	Merge pull request #268 from trabucayre/runber_support ... Add runber support	2021-09-15 08:32:05 +02:00
Gwenhael Goavec-Merou	7ccae3332d	Add runber support	2021-09-15 06:50:57 +02:00
Gwenhael Goavec-Merou	fed36afaba	platforms/sipeed_tang_nano_4k: fix period computation	2021-09-15 06:46:29 +02:00
Nathaniel R. Lewis	b8373a361d	alchitry_mojo: new board	2021-09-10 02:40:31 -07:00
enjoy-digital	d4613562a8	Merge pull request #265 from trabucayre/tangNano4K_connector ... platforms/sipeed_tang_nano_4k: add P6 and P7 connectors	2021-09-09 11:43:05 +02:00
enjoy-digital	cacb76450f	Merge pull request #264 from teknoman117/alchitry-au ... Add Alchitry Au as new board	2021-09-09 11:42:37 +02:00
Gwenhael Goavec-Merou	945e48ea83	platforms/sipeed_tang_nano_4k: add P6 and P7 connectors	2021-09-09 11:35:14 +02:00
Florent Kermarrec	8d91489756	tang_nano_4k: Add more IOs.	2021-09-09 11:23:20 +02:00
Nathaniel R. Lewis	9bbdb87130	alchitry_au: new board	2021-09-09 00:03:19 -07:00
Florent Kermarrec	88534c6689	tang_nano_4k: Fix typo in sipeed.	2021-09-08 23:02:39 +02:00
Florent Kermarrec	ce52c8c5ed	beaglewire: Fix typo in qwertyembedded.	2021-09-08 21:29:29 +02:00
Florent Kermarrec	ecebe7e267	Add initial SiSpeed Tang Nano 4K support (Led blink only for now...). ... ./sispeed_tang_nano_4k.py --build --load Build with Gowin EDA. Load with OpenFPGALoader.	2021-09-08 19:36:46 +02:00
Florent Kermarrec	fddca1cd40	gsd_butterstick: Add SDCard (SPI & SD modes) support.	2021-09-02 14:06:09 +02:00
Florent Kermarrec	596f430326	gsd_butterstick: Add SPI Flash support.	2021-09-02 11:28:21 +02:00
Florent Kermarrec	1bbbf5b3e7	gsd_butterstick: Add SYZYGY0/1 IOs to connectors.	2021-09-02 10:26:18 +02:00
Florent Kermarrec	55ea71bd01	gsd_butterstick: Add initial DDR3 support. ... Validated with: ./gsd_butterstick.py --uart-name=crossover --with-etherbone --csr-csv=csr.csv --build --load litex_server --udp litex_term bridge __ _ __ _ __ / / (_) /____ | |/_/ / /__/ / __/ -_)> < /____/_/\__/\__/_/|_| Build your hardware, easily! (c) Copyright 2012-2021 Enjoy-Digital (c) Copyright 2007-2015 M-Labs BIOS built on Sep 1 2021 19:09:52 BIOS CRC passed (3d349845) Migen git sha1: 27dbf03 LiteX git sha1: 315fbe18 --=============== SoC ==================-- CPU: VexRiscv @ 75MHz BUS: WISHBONE 32-bit @ 4GiB CSR: 32-bit data ROM: 128KiB SRAM: 8KiB L2: 8KiB SDRAM: 524288KiB 16-bit @ 300MT/s (CL-6 CWL-5) --========== Initialization ============-- Initializing SDRAM @0x40000000... Switching SDRAM to software control. Read leveling: m0, b00: |01110000| delays: 02+-01 m0, b01: |00000000| delays: - m0, b02: |00000000| delays: - m0, b03: |00000000| delays: - best: m0, b00 delays: 02+-01 m1, b00: |01110000| delays: 02+-01 m1, b01: |00000000| delays: - m1, b02: |00000000| delays: - m1, b03: |00000000| delays: - best: m1, b00 delays: 02+-01 Switching SDRAM to hardware control. Memtest at 0x40000000 (2.0MiB)... Write: 0x40000000-0x40200000 2.0MiB Read: 0x40000000-0x40200000 2.0MiB Memtest OK Memspeed at 0x40000000 (Sequential, 2.0MiB)... Write speed: 13.6MiB/s Read speed: 15.6MiB/s --============== Boot ==================-- Booting from serial... Press Q or ESC to abort boot completely. sL5DdSMmkekro Timeout No boot medium found --============= Console ================-- litex>	2021-09-01 19:21:16 +02:00
Florent Kermarrec	1f25a98476	butterstick: Add Ethernet/Etherbone support (UART crossover working over Etherbone).	2021-09-01 18:03:13 +02:00
Florent Kermarrec	1f149ece6b	Add intial ButterStick support (with just Clk, Buttons and Leds).	2021-09-01 17:33:54 +02:00
enjoy-digital	4731c500fb	Merge pull request #258 from danc86/clnexevn-device-arg ... lattice_crosslink_nx_evn: allow specifying the FPGA device	2021-09-01 10:22:42 +02:00
Florent Kermarrec	ce254208ff	beaglewire: Review/Cleanup for consistency with other targets. ... - Now uses regular UART. - Build tested with: ./quertyembedded_beaglewire.py --cpu-type=serv --build - Can still be build with Crossover UART with --uart-name=crossover+bridge.	2021-09-01 10:18:11 +02:00
Florent Kermarrec	35df77258a	beaglewire: Rename to quertyembedded_beaglewire.	2021-09-01 09:36:09 +02:00
enjoy-digital	1e1f6a476d	Merge pull request #254 from ombhilare999/master ... beaglewire platform and target added	2021-09-01 09:33:07 +02:00
Florent Kermarrec	4a18951651	tul_pynq_z2: Fix copyrights, remove PS7 part for now.	2021-09-01 08:50:56 +02:00
enjoy-digital	54c777a49c	Merge pull request #252 from developandplay/PYNQ-Z2 ... WIP: Initial PYNQ Z2 support	2021-09-01 08:46:44 +02:00
enjoy-digital	6a08a7973c	Merge pull request #251 from niw/fix_orangecrab_feather_spi_pad_name ... FIX: OrangeCrab Feather SPI pad name	2021-08-31 18:59:09 +02:00
Dhiru Kholia	781d83bab6	Add support for EBAZ4205 'Development' Board ... Usage: ``` ./ebaz4205.py --cpu-type=vexriscv --build --load ``` ``` $ pwd litex-boards/litex_boards/targets ``` Tip: Use `GTKTerm` to connect to /dev/ttyUSB0 (usually) and interact with the LiteX BIOS. References: - https://github.com/fusesoc/blinky#ebaz4205-development-board - https://github.com/olofk/serv/#ebaz4205-development-board - https://github.com/xjtuecho/EBAZ4205#ebaz4205 - https://github.com/nmigen/nmigen-boards/pull/180 (merged) - https://github.com/olofk/corescore/pull/33 - The existing 'Zybo Z7' example Note: The `PS7` stuff remains untested via LiteX for now.	2021-08-31 18:54:49 +02:00
Yoshimasa Niwa	fc78c96444	FIX: OrangeCrab Feather SPI pad name ... **Problems** `SPIMaster` pad names are `clk`, `cs_n`, `mosi`, and `miso`. However, `feather_spi` is using `sck` instead of `clk`, therefore it is not able to use as-is for `SPIMaster`, for example, with `add_spi` on Linux On LiteX VexRiscv. **Solution** In fact, `spisdcard` and other SPI related pad names are using `clk`, only `feather_spi` is using `sck`. Therefore, rename `sck` to `clk`.	2021-08-29 17:59:45 -07:00
Dan Callaghan	cc9e39286a	lattice_crosslink_nx_evn: allow specifying the FPGA device ... This board is documented as having the LIFCL-40-9BG400C part, but some versions of the board exist which were fitted with LIFCL-40-8BG400CES, an engineering sample part. The distinction is important because the engineering sample requires a different device ID to be embedded in the bitstream. If you try to build a bitstream for LIFCL-40-9BG400C and load it onto LIFCL-40-8BG400CES the configuration fails (indicated by the red "INITN" LED on this board). Accept --device to allow the user to specify which FPGA part their board has.	2021-08-17 18:30:03 +10:00
ombhilare999	db9c98b28a	beaglewire platform and target added	2021-08-16 20:14:45 +05:30
Martin Troiber	22e823d756	Initial PYNQ Z2 support	2021-08-13 16:23:39 +02:00
MV	b81309401e	Initial Digilent Atlys support	2021-08-06 13:24:19 +02:00
Sergiu Mosanu	99ff82c75a	xilinx_alveo_u280: Add more IOs and enable HBM2.	2021-07-28 18:11:49 +02:00
Florent Kermarrec	3e8b6677e9	platforms: Make sure all platforms have a default Clk. (To be able to run simple target).	2021-07-28 12:03:06 +02:00
Florent Kermarrec	2df3f9e664	pr243/platforms: Consistency with other platforms.	2021-07-27 14:55:19 +02:00
Florent Kermarrec	3fb73b3603	platforms/digilent_nexys4ddr: Fix INTERNAL_VREF voltage (0.900v instead of 0.750v).	2021-07-27 12:29:42 +02:00
Florent Kermarrec	2becaaabfc	pr243: Minor platform cleanups.	2021-07-27 12:28:04 +02:00
Florent Kermarrec	2418df9f2b	pr243: Add @tweakoz copyrights.	2021-07-27 12:21:23 +02:00
enjoy-digital	369d2cf49d	Merge pull request #243 from tweakoz/master ... add FPGA Boards (Digilent CMOD A7, Digilent Nexys 4, Micronova Mercury2)	2021-07-27 12:17:04 +02:00
enjoy-digital	4d20cfe5cd	Merge pull request #245 from racerxdl/feat/MuselabIceSugarPro ... muselab_icesugar_pro: initial support	2021-07-23 14:34:57 +02:00
Lucas Teske	5852dbb88f	muselab_icesugar_pro: initial support	2021-07-22 11:26:27 -03:00
Florent Kermarrec	a3f479837c	digilent_arty: Allow exposing raw PMOD IOs (for tests with MicroPython).	2021-07-21 13:50:12 +02:00
Florent Kermarrec	8c8e163eee	trenz_tec0117: Add SDCard (SPI and SD mode), move SPI Flash to 0x00000000 and use default l2_cache_min_data_width.	2021-07-20 17:25:51 +02:00
Michael Mayers	75cadf845f	add FPGA Boards ... 1. Digilent CMOD A7 https://reference.digilentinc.com/programmable-logic/cmod-a7/start 2. Digilent Nexys 4 https://reference.digilentinc.com/programmable-logic/nexys-4/start 3. MicroNova Mercury 2 https://www.micro-nova.com/mercury-2	2021-07-17 22:03:17 -06:00
Florent Kermarrec	a74b6e83f7	trenz_tec0117: Add clock constraints.	2021-07-15 11:07:05 +02:00
Florent Kermarrec	8c1e6c6a02	decklink_quad_hdmi_recorder: Remove WIP (SoC + DDR3 now working) and add build/use instructions.	2021-07-02 15:54:57 +02:00
Florent Kermarrec	548f77c79c	decklink_quad_hdmi_recorder: Add INTERNAL_VREF constraint on DRAM banks.	2021-07-02 14:32:14 +02:00
Florent Kermarrec	1b65bad4c2	decklink_quad_hdmi: Add Clk IOs, use clk200 as primary clk and add JTAGBone.	2021-07-01 20:00:35 +02:00
Florent Kermarrec	18b2758e4e	decklink_quad_hdmi_recorder: Add other DDR3 SDRAM modules building but untested.	2021-06-30 11:50:42 +02:00
Florent Kermarrec	e65308ee13	decklink_quad_hdmi_recorder: Add DDR3 SDRAM (only first module), building but untested.	2021-06-30 09:40:08 +02:00
Florent Kermarrec	84cb5d797d	decklink_intensity_pro_4k: Add WIP.	2021-06-30 09:06:00 +02:00
Sylvain Munaut	7cb155fb9c	icebreaker: Minor fix to usb (add PMOD2 position and fix typo) ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2021-06-27 16:00:09 +02:00
Florent Kermarrec	591377cf95	decklink: Pinout fixes on itensity_pro_4k and quad_hdm_recorder.	2021-06-25 11:19:05 +02:00
Florent Kermarrec	ebfb4fad57	Add initial Decklink Intensity Pro 4K support (with documented PCIe / Untested).	2021-06-24 19:55:40 +02:00
Florent Kermarrec	5f8560bf69	Add initial Decklink Quad HDMI Recorder support (with documented PCIe/HDMI In). ... LitePCIe Gen3 X4 enumerating correctly.	2021-06-24 19:48:31 +02:00
Sylvain Munaut	2ebcb4a726	platforms: Add new 1bitsquared_icebreaker_bitsy platform ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2021-06-21 16:17:54 +02:00
Sylvain Munaut	4c758dc0e3	platforms/1bitsquared_icebreaker: Fix wrong URL in header ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2021-06-21 16:16:47 +02:00
Sylvain Munaut	675616493c	platform/1bitsquare_icebreaker: Add possible USB pinouts ... The pin outs come from LUNA : https://github.com/greatscottgadgets/luna/blob/main/luna/gateware/platform/icebreaker.py#L94 and are some commonly used ones from other projects / pmods. Signed-off-by: Sylvain Munaut <tnt@246tNt.com>	2021-06-20 22:25:49 +02:00
Florent Kermarrec	caac75c7db	trenz_max1000: Review/Cleanup.	2021-06-16 18:04:55 +02:00
Antti Lukats	8ef138eaa0	added MAX1000 board	2021-06-16 17:55:06 +02:00
Florent Kermarrec	fa045e6fa4	enclustra_mercury_kx2: Comment user_led2/3 (Conflicting with DRAM pins).	2021-06-16 11:54:52 +02:00
David Sawatzke	fe7b3968e4	Fix colorlight 5a 75b v6.1 flash pins ... As with the other versions, the clk pin can't be directly driven	2021-06-06 02:59:48 +02:00
enjoy-digital	588b430a0c	Merge pull request #217 from hansfbaier/master ... QMTech EP4CE15: Add daughterboard support, small DECA addition	2021-05-25 10:15:26 +02:00
Florent Kermarrec	1c4825e7c4	basys3: Review/Simplify and fix build.	2021-05-25 08:44:26 +02:00
enjoy-digital	25867c4dcb	Merge pull request #218 from helium729/master ... Add digilent basys3 board support	2021-05-23 19:46:58 +02:00
Jakub Cabal	dd5a4bdc92	CYC1000: Add initial support of CYC1000 board	2021-05-22 21:17:27 +02:00
helium729	ce5b2a74a1	add digilent basys3 support	2021-05-17 16:39:16 +08:00