ce254208ff
beaglewire: Review/Cleanup for consistency with other targets.
...
- Now uses regular UART.
- Build tested with: ./quertyembedded_beaglewire.py --cpu-type=serv --build
- Can still be build with Crossover UART with --uart-name=crossover+bridge.
2021-09-01 10:18:11 +02:00
35df77258a
beaglewire: Rename to quertyembedded_beaglewire.
2021-09-01 09:36:09 +02:00
1e1f6a476d
Merge pull request #254 from ombhilare999/master
...
beaglewire platform and target added
2021-09-01 09:33:07 +02:00
4a18951651
tul_pynq_z2: Fix copyrights, remove PS7 part for now.
2021-09-01 08:50:56 +02:00
54c777a49c
Merge pull request #252 from developandplay/PYNQ-Z2
...
WIP: Initial PYNQ Z2 support
2021-09-01 08:46:44 +02:00
6a08a7973c
Merge pull request #251 from niw/fix_orangecrab_feather_spi_pad_name
...
FIX: OrangeCrab Feather SPI pad name
2021-08-31 18:59:09 +02:00
8f1c15bdb8
ebaz4205: Remove PS7 support for now (since untested and we'll avoid the .xci in LiteX-Boards repository).
2021-08-31 18:56:47 +02:00
781d83bab6
Add support for EBAZ4205 'Development' Board
...
Usage:
```
./ebaz4205.py --cpu-type=vexriscv --build --load
```
```
$ pwd
litex-boards/litex_boards/targets
```
Tip: Use `GTKTerm` to connect to /dev/ttyUSB0 (usually) and interact
with the LiteX BIOS.
References:
- https://github.com/fusesoc/blinky#ebaz4205-development-board
- https://github.com/olofk/serv/#ebaz4205-development-board
- https://github.com/xjtuecho/EBAZ4205#ebaz4205
- https://github.com/nmigen/nmigen-boards/pull/180 (merged)
- https://github.com/olofk/corescore/pull/33
- The existing 'Zybo Z7' example
Note: The `PS7` stuff remains untested via LiteX for now.
2021-08-31 18:54:49 +02:00
fc78c96444
FIX: OrangeCrab Feather SPI pad name
...
**Problems**
`SPIMaster` pad names are `clk`, `cs_n`, `mosi`, and `miso`.
However, `feather_spi` is using `sck` instead of `clk`, therefore
it is not able to use as-is for `SPIMaster`, for example,
with `add_spi` on Linux On LiteX VexRiscv.
**Solution**
In fact, `spisdcard` and other SPI related pad names are
using `clk`, only `feather_spi` is using `sck`.
Therefore, rename `sck` to `clk`.
2021-08-29 17:59:45 -07:00
b017a33f2b
targets: Fix SPI Flash mapping on target supporting --with-spi-flash.
2021-08-23 18:05:40 +02:00
cc9e39286a
lattice_crosslink_nx_evn: allow specifying the FPGA device
...
This board is documented as having the LIFCL-40-9BG400C part, but some
versions of the board exist which were fitted with LIFCL-40-8BG400CES,
an engineering sample part. The distinction is important because the
engineering sample requires a different device ID to be embedded in the
bitstream. If you try to build a bitstream for LIFCL-40-9BG400C and load
it onto LIFCL-40-8BG400CES the configuration fails (indicated by the red
"INITN" LED on this board).
Accept --device to allow the user to specify which FPGA part their board
has.
2021-08-17 18:30:03 +10:00
db9c98b28a
beaglewire platform and target added
2021-08-16 20:14:45 +05:30
22e823d756
Initial PYNQ Z2 support
2021-08-13 16:23:39 +02:00
b77b1514ce
Merge pull request #250 from david-sawatzke/fullmemwe
...
colorlight_5a_75x: Disable full_memory_we for l2 cache by default
2021-08-11 09:53:47 +02:00
9f5e8d4864
colorlight_5a_75x: Disable full_memory_we for l2 cache by default
...
Leads to an increase in DP16KD, first noticed in
https://github.com/enjoy-digital/liteeth/issues/70 .
With full_mem_we:
```
Info: DP16KD: 41/ 56 73%
```
Without:
```
Info: DP16KD: 29/ 56 51%
```
2021-08-08 14:37:46 +02:00
b81309401e
Initial Digilent Atlys support
2021-08-06 13:24:19 +02:00
615b97e205
tinyfpga_bx: Switch to LiteSPI.
2021-07-30 08:18:15 +02:00
90fcaec287
targets/radiona_ulx3s: Switch to LiteSPI.
2021-07-30 08:10:52 +02:00
fdf94b95c9
muselabe_icesugar/SPIFlash: Disable Master (to avoid wasting resources on this small FPGA).
2021-07-29 19:59:22 +02:00
218e830fbf
muselab_icesugar_pro: Switch to LiteSPI.
2021-07-29 19:58:13 +02:00
569c20ab86
muselab_icesugar: Switch to LiteSPI.
2021-07-29 19:55:32 +02:00
8df797c716
lattice_ice40up5k_evn: Switch to LiteSPI.
2021-07-29 19:50:36 +02:00
5e8c29d657
colorlight_i5: Switch to LiteSPI.
2021-07-29 19:47:41 +02:00
35ba3d9bc3
targets: Remove old call to add_spi_flash on targets now using LiteSPI (we'll find it with gitk is required).
2021-07-29 11:55:10 +02:00
54cee05986
#248 : Minor cleanup.
2021-07-28 18:20:42 +02:00
a41fbea5e6
Merge pull request #248 from JosephBushagour/jbushagour_fomu_spi_options
...
Add option for different Fomu SPI ICs.
2021-07-28 18:18:12 +02:00
99ff82c75a
xilinx_alveo_u280: Add more IOs and enable HBM2.
2021-07-28 18:11:49 +02:00
7b3dce65c1
Add option for different Fomu SPI chips.
...
Signed-off-by: Joey Bushagour <jbushagour@google.com>
2021-07-28 10:34:02 -05:00
401568c54e
digilent_arty_s7: Add SPI Flash.
2021-07-28 14:22:26 +02:00
64eadd8012
hackaday_hadbadge: Lower PLL's PFD Min from 10MHz to 8MHz.
...
This is now required since ECP5PLL now checks that PFD is in required range.
2021-07-28 12:25:17 +02:00
6ce5db1b90
qmtech_xc7a35t: Fix default build.
2021-07-28 12:23:24 +02:00
1f4383475a
decklink_intensity_pro_4k: Fix default build.
2021-07-28 12:23:12 +02:00
3e8b6677e9
platforms: Make sure all platforms have a default Clk. (To be able to run simple target).
2021-07-28 12:03:06 +02:00
4e2b596ab3
digilent_arty/qmtech_xc7a35t: Rename --with-mapped-flash to --with-spi-flash.
2021-07-28 11:21:51 +02:00
fa3cc9b753
kosagi_fomu/spiflash: Switch to READ_1_1_4.
2021-07-28 11:10:34 +02:00
1118b09350
trenz_tec0117: Switch to LiteSPI.
2021-07-28 10:34:17 +02:00
9065cfa75d
kosagi_fomu: Switch to LiteSPI.
2021-07-27 19:55:04 +02:00
b3e7dbfd30
qmtech_xc7a35t: LiteSPI integration now provided by LiteX.
2021-07-27 19:39:50 +02:00
55ba0591df
targets: Remove SpiFlash imports (Obsolete since integration is provided by LiteX).
2021-07-27 19:35:19 +02:00
1c52e6b8fb
targets/digilent_arty/spiflash: LiteSPI integration now provided by LiteX.
2021-07-27 19:30:38 +02:00
15b5aec23f
1bitsquared_icebreaker_bitsy: Also switch to LiteSPI.
2021-07-27 19:27:28 +02:00
959780f372
1bitsquared_icebreaker: Switch to LiteSPI (with integration now done by LiteX).
...
Keep the old add_spi_flash call commented for now just in case we need to compare/test it.
2021-07-27 19:23:26 +02:00
533d25e845
1bitsquared_icebreaker: Enable LiteSPI Master but reduce FIFO depth to reduce resource usage.
...
Already better regarding resource usage:
Info: ICESTORM_LC: 2938/ 5280 55%
Info: ICESTORM_RAM: 2/ 30 6%
Info: SB_IO: 15/ 96 15%
Info: SB_GB: 8/ 8 100%
Info: ICESTORM_PLL: 1/ 1 100%
Info: SB_WARMBOOT: 0/ 1 0%
Info: ICESTORM_DSP: 0/ 8 0%
Info: ICESTORM_HFOSC: 0/ 1 0%
Info: ICESTORM_LFOSC: 0/ 1 0%
Info: SB_I2C: 0/ 2 0%
Info: SB_SPI: 0/ 2 0%
Info: IO_I3C: 0/ 2 0%
Info: SB_LEDDA_IP: 0/ 1 0%
Info: SB_RGBA_DRV: 0/ 1 0%
Info: ICESTORM_SPRAM: 4/ 4 100%
2021-07-27 17:38:25 +02:00
12fb315e09
1bitsquared_icebreaker: Disable LiteSPI Master.
...
Requires 80e9d2cea9
2021-07-27 17:00:55 +02:00
0f648ac4ef
1bitsquared_icebreaker: Add test code to use LiteSPI.
...
Both XiP from SPI(1X) or QSPI(4X) are working, but resource usage is currently
too high to be able to switch to it by default. We'll first try to reduce it.
Resource usage using SPI(1X) and actual LiteX SPI Flash core:
Info: Device utilisation:
Info: ICESTORM_LC: 2016/ 5280 38%
Info: ICESTORM_RAM: 2/ 30 6%
Info: SB_IO: 15/ 96 15%
Info: SB_GB: 8/ 8 100%
Info: ICESTORM_PLL: 1/ 1 100%
Info: SB_WARMBOOT: 0/ 1 0%
Info: ICESTORM_DSP: 0/ 8 0%
Info: ICESTORM_HFOSC: 0/ 1 0%
Info: ICESTORM_LFOSC: 0/ 1 0%
Info: SB_I2C: 0/ 2 0%
Info: SB_SPI: 0/ 2 0%
Info: IO_I3C: 0/ 2 0%
Info: SB_LEDDA_IP: 0/ 1 0%
Info: SB_RGBA_DRV: 0/ 1 0%
Info: ICESTORM_SPRAM: 4/ 4 100%
Resource usage using LiteSPI:
Info: Device utilisation:
Info: ICESTORM_LC: 3964/ 5280 75%
Info: ICESTORM_RAM: 2/ 30 6%
Info: SB_IO: 15/ 96 15%
Info: SB_GB: 8/ 8 100%
Info: ICESTORM_PLL: 1/ 1 100%
Info: SB_WARMBOOT: 0/ 1 0%
Info: ICESTORM_DSP: 0/ 8 0%
Info: ICESTORM_HFOSC: 0/ 1 0%
Info: ICESTORM_LFOSC: 0/ 1 0%
Info: SB_I2C: 0/ 2 0%
Info: SB_SPI: 0/ 2 0%
Info: IO_I3C: 0/ 2 0%
Info: SB_LEDDA_IP: 0/ 1 0%
Info: SB_RGBA_DRV: 0/ 1 0%
Info: ICESTORM_SPRAM: 4/ 4 100%
2021-07-27 16:50:18 +02:00
0ca203487b
pr243: Make led_chaser optional.
2021-07-27 15:00:18 +02:00
9835bd5f93
targets/muselab_icesugar_pro: +x.
2021-07-27 14:56:33 +02:00
2df3f9e664
pr243/platforms: Consistency with other platforms.
2021-07-27 14:55:19 +02:00
3fb73b3603
platforms/digilent_nexys4ddr: Fix INTERNAL_VREF voltage (0.900v instead of 0.750v).
2021-07-27 12:29:42 +02:00
2becaaabfc
pr243: Minor platform cleanups.
2021-07-27 12:28:04 +02:00
2418df9f2b
pr243: Add @tweakoz copyrights.
2021-07-27 12:21:23 +02:00
369d2cf49d
Merge pull request #243 from tweakoz/master
...
add FPGA Boards (Digilent CMOD A7, Digilent Nexys 4, Micronova Mercury2)
2021-07-27 12:17:04 +02:00
10bfd50e22
targets/1bitsquared_icebreaker: Revert to 128KB SPRAM.
2021-07-27 12:03:39 +02:00
4d20cfe5cd
Merge pull request #245 from racerxdl/feat/MuselabIceSugarPro
...
muselab_icesugar_pro: initial support
2021-07-23 14:34:57 +02:00
5852dbb88f
muselab_icesugar_pro: initial support
2021-07-22 11:26:27 -03:00
a3f479837c
digilent_arty: Allow exposing raw PMOD IOs (for tests with MicroPython).
2021-07-21 13:50:12 +02:00
a455713e0c
kosagi_fomu: Handle bios_flash_offset in flash function and make DFU flash offset explicit.
2021-07-21 11:41:35 +02:00
fbcecee1f8
Merge pull request #242 from tcal-x/fix-basys3-rst
...
Basys3: Invert reset button, so that the board is reset when btnc is pushed.
2021-07-20 19:47:53 +02:00
8c8e163eee
trenz_tec0117: Add SDCard (SPI and SD mode), move SPI Flash to 0x00000000 and use default l2_cache_min_data_width.
2021-07-20 17:25:51 +02:00
75cadf845f
add FPGA Boards
...
1. Digilent CMOD A7
https://reference.digilentinc.com/programmable-logic/cmod-a7/start
2. Digilent Nexys 4
https://reference.digilentinc.com/programmable-logic/nexys-4/start
3. MicroNova Mercury 2
https://www.micro-nova.com/mercury-2
2021-07-17 22:03:17 -06:00
5da2bdefb7
Invert reset button, so that board is reset when btn is pushed.
...
Signed-off-by: Tim Callahan <tcal@google.com>
2021-07-16 13:08:18 -07:00
4b48f15265
Merge pull request #236 from JosephBushagour/jbushagour_with_led_chaser
...
Add with_led_chaser argument to constructor of boards using LedChaser submodule.
2021-07-16 14:41:05 +02:00
a74b6e83f7
trenz_tec0117: Add clock constraints.
2021-07-15 11:07:05 +02:00
6648b2f907
targets/trenz_tec0117: Switch SPI Flash to QSPI mode.
2021-07-15 09:15:34 +02:00
c369f4bb7f
trenz_tec0117: Get BIOS XiP from SPI Flash working, remove CPU variant force since can now fit default VexRiscv config.
2021-07-14 12:49:03 +02:00
132feaf3e8
trenz_tec0117: Prepare for 1:2 SDRAM rate (Not yet working at 1:2 but one step closer...).
2021-07-14 10:43:26 +02:00
ba8321a3ab
trenz_tec0117: Use new DDROutput to generate SDRAM Clk.
2021-07-14 10:02:58 +02:00
94b985ac56
trenz_tec0117: Use new integrated reset from GW1NPLL.
2021-07-14 09:55:00 +02:00
6e31d12fa9
trenz_tec0117: Avoid forcing CPU type (only force to lite variant when VexRiscv is selected=default).
2021-07-13 19:39:53 +02:00
1920db3535
Add with_led_chaser argument to constructor of boards using LedChaser submodule.
2021-07-06 16:39:37 -05:00
8c1e6c6a02
decklink_quad_hdmi_recorder: Remove WIP (SoC + DDR3 now working) and add build/use instructions.
2021-07-02 15:54:57 +02:00
2dff854b7a
decklink_quad_hdmi_recorder: Enable second DDR3 module.
2021-07-02 15:52:12 +02:00
a02855d105
decklink_quad_hdmi_recorder: Increase sys_clk to 200MHz.
2021-07-02 15:07:13 +02:00
b18f6a2c7f
decklink_quad_hdmi_recorder: Enable DRAM modules 0 and 1, fix pre placement constraints.
2021-07-02 14:32:53 +02:00
548f77c79c
decklink_quad_hdmi_recorder: Add INTERNAL_VREF constraint on DRAM banks.
2021-07-02 14:32:14 +02:00
7442639a5e
targets/digilent_arty: Add default value for CRG's with_mapped_flash.
...
Otherwise break retro-compat on external design importing CRG without passing this new parameter.
2021-07-02 09:33:06 +02:00
1b65bad4c2
decklink_quad_hdmi: Add Clk IOs, use clk200 as primary clk and add JTAGBone.
2021-07-01 20:00:35 +02:00
18b2758e4e
decklink_quad_hdmi_recorder: Add other DDR3 SDRAM modules building but untested.
2021-06-30 11:50:42 +02:00
e65308ee13
decklink_quad_hdmi_recorder: Add DDR3 SDRAM (only first module), building but untested.
2021-06-30 09:40:08 +02:00
84cb5d797d
decklink_intensity_pro_4k: Add WIP.
2021-06-30 09:06:00 +02:00
7cb155fb9c
icebreaker: Minor fix to usb (add PMOD2 position and fix typo)
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-27 16:00:09 +02:00
591377cf95
decklink: Pinout fixes on itensity_pro_4k and quad_hdm_recorder.
2021-06-25 11:19:05 +02:00
ebfb4fad57
Add initial Decklink Intensity Pro 4K support (with documented PCIe / Untested).
2021-06-24 19:55:40 +02:00
5f8560bf69
Add initial Decklink Quad HDMI Recorder support (with documented PCIe/HDMI In).
...
LitePCIe Gen3 X4 enumerating correctly.
2021-06-24 19:48:31 +02:00
8ec1435e65
targets/decklink_mini_4k: Fix typos.
2021-06-24 19:13:18 +02:00
87cd56d187
targets: Add new 1bitsquared_icebreaker_bitsy target
...
Most basic SoC ever but ... it runs
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 22:11:53 +02:00
2ebcb4a726
platforms: Add new 1bitsquared_icebreaker_bitsy platform
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 16:17:54 +02:00
4c758dc0e3
platforms/1bitsquared_icebreaker: Fix wrong URL in header
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 16:16:47 +02:00
675616493c
platform/1bitsquare_icebreaker: Add possible USB pinouts
...
The pin outs come from LUNA :
https://github.com/greatscottgadgets/luna/blob/main/luna/gateware/platform/icebreaker.py#L94
and are some commonly used ones from other projects / pmods.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-20 22:25:49 +02:00
caac75c7db
trenz_max1000: Review/Cleanup.
2021-06-16 18:04:55 +02:00
8ef138eaa0
added MAX1000 board
2021-06-16 17:55:06 +02:00
fa045e6fa4
enclustra_mercury_kx2: Comment user_led2/3 (Conflicting with DRAM pins).
2021-06-16 11:54:52 +02:00
fe7b3968e4
Fix colorlight 5a 75b v6.1 flash pins
...
As with the other versions, the clk pin can't be directly driven
2021-06-06 02:59:48 +02:00
588b430a0c
Merge pull request #217 from hansfbaier/master
...
QMTech EP4CE15: Add daughterboard support, small DECA addition
2021-05-25 10:15:26 +02:00
df10fc54ad
muselab_icesugar/trenz_cyc1000: +x.
2021-05-25 08:46:33 +02:00
1c4825e7c4
basys3: Review/Simplify and fix build.
2021-05-25 08:44:26 +02:00
25867c4dcb
Merge pull request #218 from helium729/master
...
Add digilent basys3 board support
2021-05-23 19:46:58 +02:00
dd5a4bdc92
CYC1000: Add initial support of CYC1000 board
2021-05-22 21:17:27 +02:00
bf123db20b
icebreaker/fomu: Update flashing and disconnect reset from SoC (will need proper support in iCE40PLL).
2021-05-20 09:14:54 +02:00
ce5b2a74a1
add digilent basys3 support
2021-05-17 16:39:16 +08:00
f01e0c02c9
qmtech ep4ce15: Add daughterboard support, add spiflash
2021-05-15 13:16:43 +07:00
c010b9a335
Merge pull request #215 from hansfbaier/qmtech-xc7a35t
...
Qmtech xc7a35t
2021-05-10 08:31:08 +02:00
ddaab5317e
qmtech_xc7a35 set symbiflow_device, needed when using symbiflow
2021-05-08 18:01:01 +07:00
df447ddc87
QMTech XC7A35T: fix argument parser description
2021-05-08 08:49:07 +07:00
f2b51b0233
icesugar: map the usb port
2021-05-08 07:34:10 +07:00
5027b270fd
__init__.py: Add muselab to vendors.
2021-05-07 09:10:51 +02:00
e99272cb07
muselab_icesugar: Modify comments a bit.
2021-05-07 08:57:34 +02:00
5ae130661f
Merge pull request #213 from hansfbaier/icesugar
...
muselab_icesugar: first basic version which boots
2021-05-07 08:50:50 +02:00
2c2a9db3cc
Merge pull request #212 from hansfbaier/qmtech-xc7a35t
...
add QMTECH XC7A35T core board + daughter board
2021-05-07 08:32:16 +02:00
9e86c094c9
Merge pull request #211 from Acathla-fr/master
...
Lattice iCE40 UltraPlus Breakout board (iCE40UP5K-B-EVN) added
2021-05-07 08:30:01 +02:00
c2e0f6026e
muselab_icesugar: first basic version that boots
2021-05-07 11:50:28 +07:00
3bb84b0071
Add initial Blackmagic Decklink Mini 4K support (with UART, DDR3, PCIe, Video Out).
...
Mini Monitor 4K and Mini Recorder 4K are almost the same hardware with just changes on
the Video In/Out. For now tests have been done on the Mini Monitor 4K, but the aim is
support both boards in the same platform/target in the future, thus the mini_4k naming.
These boards could be used as affordable Artix7 dev boards for LiteX, to run Linux with
LiteX (512MB of RAM + a Video Framebuffer) or to create custom systems like a fast software
defined signal generator/recorder directly from a PC over PCIe, custom HDMI/SDI video
cards, etc... lots of possibilities :)
2021-05-06 09:47:01 +02:00
eec1078736
add QMTECH XC7A35T core board + daughter board
2021-05-06 05:50:48 +07:00
213d100860
Lattice iCE40 UltraPlus Breakout board (iCE40UP5K-B-EVN) added
2021-05-04 12:19:21 +02:00
026c623e17
Merge pull request #207 from hplp/master
...
Minor fixes for AU280 [work in progress]
2021-05-03 10:20:34 +02:00
2c5bf95f70
targets/trenz_tec0117: Switch to new GW1NPLL.
2021-04-30 11:32:24 +02:00
4f45462b95
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2021-04-29 15:41:03 -04:00
9686db0ed3
targets: Update names in build descriptions.
2021-04-29 11:56:52 +02:00
6117b98049
siglent_sds1104xe: Avoid disabling hardware interface with BIOS ethernet reset.
2021-04-29 11:52:41 +02:00
c28a161392
siglent_sds1104xe: Expose ethphy (to allow correct .dts generation).
2021-04-29 11:02:13 +02:00
7d651a9a17
siglent_sds1104xe: Switch to VideoVGAPHY and adjust timings.
2021-04-29 10:41:19 +02:00
cfbcb8538d
siglent_sds1104xe: Use custom 800x480 video timings.
2021-04-28 16:59:09 +02:00
84e65d2113
Merge pull request #204 from hansfbaier/master
...
terasic_sockit: fix: make video clock also optional as video terminal is optional
2021-04-28 09:42:13 +02:00
be6d08aff1
Merge pull request #205 from antmicro/jboc/lpddr4-tb-eth-delay
...
antmicro_lpddr4_test_board: fix ethernet rx delay issue
2021-04-28 09:41:11 +02:00
8ad91d9eb3
fix cmdltncy, with_led
2021-04-27 17:30:56 -04:00
f7ee3fa454
sds1104xe: Framebuffer fixes.
2021-04-27 19:32:03 +02:00
694608688d
terasic_sockit: fix: make video clock also optional as video terminal is optional
2021-04-27 08:52:11 +07:00
5bfeb999e4
targets/digilent_arty/flash: Simplify, use Quad mode and sys_clk (fast enough ~5MB/s).
2021-04-26 16:30:35 +02:00
2854df5028
Arty: move spiflash PHY do 4x faster clk domain
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-04-26 12:52:36 +02:00
84ae2b2bbc
arty: add option to use litespi QSPI controller
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-04-26 12:52:30 +02:00
2d2a10621f
antmicro_lpddr4_test_board: fix ethernet rx delay issue
2021-04-23 15:25:47 +02:00
228a9650d4
sqrl_acorn: Add flashing/reload support when used with PCIe, fix JTAG flash.
2021-04-21 17:00:40 +02:00
443b954c0c
platforms/xilinx_kcu105: Add Pmod0/1 connectors.
2021-04-19 15:11:43 +02:00
d2eabd112d
Add E-Elements Ego1 initial board support.
2021-04-12 08:20:46 +02:00
cd3d4c826e
Add Trenz te0725 initial board support.
2021-04-12 08:16:45 +02:00
5519c931f8
xilinx_alveo_u280: Fix DDR4 (tested with 8 modules on C0 and C1).
2021-04-12 08:07:16 +02:00
d830ef8393
Merge pull request #200 from rdolbeau/wukong_ethfix_fb
...
Qmtech Wukong: updates
2021-04-11 14:44:25 +02:00
2a7d8c5330
Merge pull request #199 from zyp/ignore_missing_deps
...
boards/compat: Skip targets with unsatisfied dependencies.
2021-04-11 14:43:01 +02:00
bad8821c2d
platforms/ecpix5: Add ULPI signals.
2021-04-11 11:12:56 +02:00
d5318dcb03
Qmtech Wukong: updates
...
fix ethernet clock (it's a GMII), add FB support over the HDMI connector (hdmi clock set from the resolution)
2021-04-10 16:26:25 +02:00
2e204285de
boards/compat: Skip targets with unsatisfied dependencies.
...
Fixes #194
2021-04-10 11:41:13 +02:00
03accabc25
lpddr4_test_board: Add antmicro vendor prefix.
2021-03-31 09:48:23 +02:00
a834985e00
Add target for LPDDR4 Test Board
2021-03-30 14:50:02 +02:00
d5ce1901d8
targets/digilent_nexys_video: Add specific Video PLL to give more flexibility on supported Video Timings.
2021-03-30 10:17:50 +02:00
9417044584
targets: Minor cleanup, make sure all targets can be built with default settings.
2021-03-29 16:22:39 +02:00
1ca8ef97a1
targets/add_sdram: Specific size only when useful (ie for targets with > 1GB of RAM).
2021-03-29 16:03:19 +02:00
ba01776432
targets/add_sdram: Simplify call by removing useless arguments.
...
- main_ram mem_map is now directly used by add_sdram when origin is None.
- max_sdram_size/min_l2_data_width are no longer exposed as targets arguments this can
still be used enforced directly in the few cases it is useful.
2021-03-29 15:28:31 +02:00
58286ce29e
minispartan6: Change video resolution to 640x480, framebuffer working with Linux-on-LiteX-Vexriscv.
2021-03-29 14:36:34 +02:00
09700b28d0
ulx3s: Change video resolution to 640x480, framebuffer working with Linux-on-LiteX-Vexriscv.
2021-03-29 11:35:55 +02:00
73ce7f9df1
ztex213 fix; propagate variant from targets to platform
2021-03-27 11:04:51 +01:00
7c537748a0
colorlight_i5: Remove PRBS (too specific to application).
...
If useful for several boards, this should probably be provided directly by LiteX.
2021-03-27 09:31:48 +01:00
7737575b88
terasic_deca: Remove --integrated-ram-size parameter (--integrated-main-ram-size provides the same functionnality).
2021-03-27 08:58:49 +01:00
f714e1210a
terasic_deca: Remove enforced CPU variant/debug: --cpu-variant=imac or --cpu-variant=imac+debug can be used for this.
...
The default CPU/Variant is defined in LiteX, enforcing the variant on the target
prevent usage of the other CPUs and also complicate maintenance.
2021-03-27 08:56:46 +01:00
a48def1352
rhsresearchllc_litefury: Remove since already supported by ./acorn.py --variant=cle-101.
2021-03-26 23:54:56 +01:00
4329a69128
sqrl_acorn_cle_215: Rename to sqrl_acorn and add support for all variants (CLE-101, 215 and 215+).
2021-03-26 23:52:36 +01:00
87df45e625
siglent_sds1104xe: Allow build without Etherbone.
2021-03-26 23:25:42 +01:00
c6ced293d4
targets/siglent_sds1104xe: Integrate VideoTerminal/VideoFrameBuffer.
2021-03-26 22:55:25 +01:00
52ded1c9aa
terasic_deca: Fix default_clk_name.
2021-03-26 22:43:40 +01:00
b54eed0859
terasic_sockit: Review/Cleanup for consistency with other boards.
2021-03-26 22:39:19 +01:00
53a767c85c
terasic_deca: Review/Cleanup for consistency with other boards.
2021-03-26 22:12:13 +01:00
be4965ca78
Merge pull request #192 from hansfbaier/deca_fixes
...
terasic_deca: fix cable name, ulpi, names, add gpio_serial
2021-03-26 21:52:31 +01:00
9fea5a7fc6
targets/digilent_nexys_video: Cleanup/Simplify #191 .
2021-03-26 21:49:22 +01:00
df58639916
nexys_video: choose VADJ value with arguments
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-03-26 14:50:05 +01:00
8c0ddd140b
terasic_deca: fix cable name, ulpi, names, add gpio_serial
2021-03-26 10:46:37 +07:00
e2de69496a
targets/lattice_crossing: Avoid direct override of SoCCore.mem_map (break default SoCore.mem_map with updated imports).
2021-03-25 22:41:26 +01:00
b284fe47c3
targets/terasic_sockit: Fix compilation.
2021-03-25 19:35:44 +01:00
22f167dde4
targets/sqrl_acorn_cle_215: Add missing false path constraints.
2021-03-25 18:19:20 +01:00
7d130d6981
targets/pcie: Cleanup.
2021-03-25 17:47:06 +01:00
333fb362ca
Move import Compat directly to litex_boards.__init__.py and simplify.
2021-03-25 16:47:47 +01:00
062b899e29
platforms/targets: Add mode Vendor prefixes.
2021-03-25 16:19:11 +01:00
7633eae360
targets/colorlight_i5: Remove l2-size args (already provided by soc_core_args.
2021-03-25 14:44:52 +01:00
5253a3c43e
test/ci: Fix/Update.
2021-03-25 14:21:13 +01:00
9a45c49918
targets/versa_ecp5: Also add Vendor prefix.
2021-03-25 14:13:32 +01:00
8a3cacae32
boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).
2021-03-25 14:11:17 +01:00
219067ed3a
Merge pull request #190 from kazkojima/colorlight_i5-video
...
colorlight_i5: Integrate Video Terminal and Video Framebuffer with ne…
2021-03-25 10:28:52 +01:00
47bdf5f759
targets: Use new CSR automatic allocation (self.add_csr will still work but is no longer required).
2021-03-25 10:11:24 +01:00
b3786c5e52
fomu/icebreaker: Update Up5KSPRAM import (litex.soc.cores.up5kspram deprecated, still supported for now but triggers a compat notice).
2021-03-24 17:22:55 +01:00
5995769b46
targets: Switch to soc_core_args/soc_core_argdict (instead of soc_sdram that is now deprecated, but still supported for now).
2021-03-24 17:22:51 +01:00
cb4e00c3f2
colorlight_i5: Integrate Video Terminal and Video Framebuffer with new VideoECP5HDMIPHY.
2021-03-20 07:56:59 +09:00
7a1fe7a6bc
nexys4ddr: add pmod connectors, and optional sdcard on pmodd
2021-03-19 12:33:11 -04:00
6d32c76aa2
Merge pull request #188 from hansfbaier/848-deca-video-bloat
...
fix #848 : allow ram initialization in bitstream to enable block ram
2021-03-19 11:11:05 +01:00
ddd46205aa
ulx3s: Integrate Video Terminal and Video Framebuffer with new VideoECP5HDMIPHY.
2021-03-18 15:06:35 +01:00
4330769add
minispartan6: Integrate Video Terminal and Video Framebuffer with new VideoS6HDMIPHY.
2021-03-18 14:10:42 +01:00
b7d86df01d
fix #848 : allow ram initialization in bitstream to enable block ram inference for ROM/RAM with initial value
2021-03-18 08:41:19 +07:00
8b69ee57a6
arrow_sockit: get video terminal working on VGA
2021-03-16 12:31:41 +07:00
75f7120ff9
targets/Ultrascale: Fix build since idelay's reset is now handled by the PLL (with_reset=True).
2021-03-11 10:00:06 +01:00
8d3aaa8ea9
targets/nexys_video: Revert clk100 to avoid breaking Linux-on-LiteX-VexRiscv (we'll remove it when the switch the simple framebuffer will be done).
2021-03-11 09:48:26 +01:00
0e2d9a571e
alveo_u280: Fix copyrights (avoid too much cascading on Platforms/Targets) and generate reset on idelay clock domain (similarly to recent change on others Ultrascale+ boards).
2021-03-10 11:23:27 +01:00
f4ea3fb0d9
Merge pull request #168 from hplp/alveo_u280
...
Alveo U280 board
2021-03-10 11:16:32 +01:00
7c6876df42
Merge pull request #186 from gatecat/mipi_pins_x
...
crosslink_nx_vip: Remove constraints for hard MIPI pins
2021-03-10 11:13:49 +01:00
61f44739d7
Merge pull request #185 from stffrdhrn/arty-jtagbone
...
arty: Add an option to enable jtagbone
2021-03-10 11:12:20 +01:00
47faaf20d5
deca: Integrate Video Terminal (untested, resource issue).
2021-03-09 15:02:30 +01:00
8fb80053f7
targets/versa_ecp5: Fix LiteEthPHYRMGII tx/rx delays (need to be updated due to a bug fix in the ECP5RGMII PHY).
2021-03-08 17:39:13 +01:00
496cae54ff
crosslink_nx_vip: Remove constraint for MIPI pins
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-08 14:26:40 +00:00
9cdcb8cb43
ecpix5: Add Etherbone (--with-etherbone).
2021-03-08 13:45:09 +01:00
52ce49cf0c
arty: Add an option to enable jtagbone
...
Then adds jtagbone for arty. I have tested with the following
litex_server and it seems to work fine.
litex_server --jtag --jtag-config openocd_xc7_ft2232.cfg
Note, the jtagbone and etherbone may be mutually exclusive, but I am not
sure how to define that in the args.
2021-03-08 07:05:54 +09:00
6139bd7eba
Merge pull request #183 from gatecat/vip_split_mclk
...
crosslink_nx_vip: Camera IO fixes
2021-03-06 11:20:53 +01:00
e280bff1ec
targets/video: Simplify/Cleanup integration.
2021-03-05 14:40:27 +01:00
ce669ac8cd
targets/nexys_video: Add optional VideoTerminal/VideoFramebuffer.
2021-03-05 14:33:22 +01:00
547157c9ca
crosslink_nx_vip: Fix cam_reset IO configuration
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-05 11:26:56 +00:00
Florent Kermarrec
Dhiru Kholia
Yoshimasa Niwa
Dan Callaghan
ombhilare999
Martin Troiber
David Sawatzke
MV
Sergiu Mosanu
Joey Bushagour
Lucas Teske
Michael Mayers
Tim Callahan
Sylvain Munaut
Antti Lukats
Jakub Cabal
helium729
Hans Baier
Fabien
Karol Gugala
Jędrzej Boczar
Shinken Sanada
Vegard Storheil Eriksen
Romain Dolbeau
Alessandro Comodi
Kaz Kojima
Gabriel Somlo
gatecat
Stafford Horne