f01e0c02c9
qmtech ep4ce15: Add daughterboard support, add spiflash
2021-05-15 13:16:43 +07:00
c010b9a335
Merge pull request #215 from hansfbaier/qmtech-xc7a35t
...
Qmtech xc7a35t
2021-05-10 08:31:08 +02:00
ddaab5317e
qmtech_xc7a35 set symbiflow_device, needed when using symbiflow
2021-05-08 18:01:01 +07:00
df447ddc87
QMTech XC7A35T: fix argument parser description
2021-05-08 08:49:07 +07:00
f2b51b0233
icesugar: map the usb port
2021-05-08 07:34:10 +07:00
5027b270fd
__init__.py: Add muselab to vendors.
2021-05-07 09:10:51 +02:00
e99272cb07
muselab_icesugar: Modify comments a bit.
2021-05-07 08:57:34 +02:00
5ae130661f
Merge pull request #213 from hansfbaier/icesugar
...
muselab_icesugar: first basic version which boots
2021-05-07 08:50:50 +02:00
2c2a9db3cc
Merge pull request #212 from hansfbaier/qmtech-xc7a35t
...
add QMTECH XC7A35T core board + daughter board
2021-05-07 08:32:16 +02:00
9e86c094c9
Merge pull request #211 from Acathla-fr/master
...
Lattice iCE40 UltraPlus Breakout board (iCE40UP5K-B-EVN) added
2021-05-07 08:30:01 +02:00
c2e0f6026e
muselab_icesugar: first basic version that boots
2021-05-07 11:50:28 +07:00
3bb84b0071
Add initial Blackmagic Decklink Mini 4K support (with UART, DDR3, PCIe, Video Out).
...
Mini Monitor 4K and Mini Recorder 4K are almost the same hardware with just changes on
the Video In/Out. For now tests have been done on the Mini Monitor 4K, but the aim is
support both boards in the same platform/target in the future, thus the mini_4k naming.
These boards could be used as affordable Artix7 dev boards for LiteX, to run Linux with
LiteX (512MB of RAM + a Video Framebuffer) or to create custom systems like a fast software
defined signal generator/recorder directly from a PC over PCIe, custom HDMI/SDI video
cards, etc... lots of possibilities :)
2021-05-06 09:47:01 +02:00
eec1078736
add QMTECH XC7A35T core board + daughter board
2021-05-06 05:50:48 +07:00
213d100860
Lattice iCE40 UltraPlus Breakout board (iCE40UP5K-B-EVN) added
2021-05-04 12:19:21 +02:00
026c623e17
Merge pull request #207 from hplp/master
...
Minor fixes for AU280 [work in progress]
2021-05-03 10:20:34 +02:00
2c5bf95f70
targets/trenz_tec0117: Switch to new GW1NPLL.
2021-04-30 11:32:24 +02:00
4f45462b95
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2021-04-29 15:41:03 -04:00
9686db0ed3
targets: Update names in build descriptions.
2021-04-29 11:56:52 +02:00
6117b98049
siglent_sds1104xe: Avoid disabling hardware interface with BIOS ethernet reset.
2021-04-29 11:52:41 +02:00
c28a161392
siglent_sds1104xe: Expose ethphy (to allow correct .dts generation).
2021-04-29 11:02:13 +02:00
7d651a9a17
siglent_sds1104xe: Switch to VideoVGAPHY and adjust timings.
2021-04-29 10:41:19 +02:00
cfbcb8538d
siglent_sds1104xe: Use custom 800x480 video timings.
2021-04-28 16:59:09 +02:00
84e65d2113
Merge pull request #204 from hansfbaier/master
...
terasic_sockit: fix: make video clock also optional as video terminal is optional
2021-04-28 09:42:13 +02:00
be6d08aff1
Merge pull request #205 from antmicro/jboc/lpddr4-tb-eth-delay
...
antmicro_lpddr4_test_board: fix ethernet rx delay issue
2021-04-28 09:41:11 +02:00
8ad91d9eb3
fix cmdltncy, with_led
2021-04-27 17:30:56 -04:00
f7ee3fa454
sds1104xe: Framebuffer fixes.
2021-04-27 19:32:03 +02:00
694608688d
terasic_sockit: fix: make video clock also optional as video terminal is optional
2021-04-27 08:52:11 +07:00
5bfeb999e4
targets/digilent_arty/flash: Simplify, use Quad mode and sys_clk (fast enough ~5MB/s).
2021-04-26 16:30:35 +02:00
2854df5028
Arty: move spiflash PHY do 4x faster clk domain
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-04-26 12:52:36 +02:00
84ae2b2bbc
arty: add option to use litespi QSPI controller
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-04-26 12:52:30 +02:00
2d2a10621f
antmicro_lpddr4_test_board: fix ethernet rx delay issue
2021-04-23 15:25:47 +02:00
228a9650d4
sqrl_acorn: Add flashing/reload support when used with PCIe, fix JTAG flash.
2021-04-21 17:00:40 +02:00
443b954c0c
platforms/xilinx_kcu105: Add Pmod0/1 connectors.
2021-04-19 15:11:43 +02:00
d2eabd112d
Add E-Elements Ego1 initial board support.
2021-04-12 08:20:46 +02:00
cd3d4c826e
Add Trenz te0725 initial board support.
2021-04-12 08:16:45 +02:00
5519c931f8
xilinx_alveo_u280: Fix DDR4 (tested with 8 modules on C0 and C1).
2021-04-12 08:07:16 +02:00
d830ef8393
Merge pull request #200 from rdolbeau/wukong_ethfix_fb
...
Qmtech Wukong: updates
2021-04-11 14:44:25 +02:00
2a7d8c5330
Merge pull request #199 from zyp/ignore_missing_deps
...
boards/compat: Skip targets with unsatisfied dependencies.
2021-04-11 14:43:01 +02:00
bad8821c2d
platforms/ecpix5: Add ULPI signals.
2021-04-11 11:12:56 +02:00
d5318dcb03
Qmtech Wukong: updates
...
fix ethernet clock (it's a GMII), add FB support over the HDMI connector (hdmi clock set from the resolution)
2021-04-10 16:26:25 +02:00
2e204285de
boards/compat: Skip targets with unsatisfied dependencies.
...
Fixes #194
2021-04-10 11:41:13 +02:00
03accabc25
lpddr4_test_board: Add antmicro vendor prefix.
2021-03-31 09:48:23 +02:00
a834985e00
Add target for LPDDR4 Test Board
2021-03-30 14:50:02 +02:00
d5ce1901d8
targets/digilent_nexys_video: Add specific Video PLL to give more flexibility on supported Video Timings.
2021-03-30 10:17:50 +02:00
9417044584
targets: Minor cleanup, make sure all targets can be built with default settings.
2021-03-29 16:22:39 +02:00
1ca8ef97a1
targets/add_sdram: Specific size only when useful (ie for targets with > 1GB of RAM).
2021-03-29 16:03:19 +02:00
ba01776432
targets/add_sdram: Simplify call by removing useless arguments.
...
- main_ram mem_map is now directly used by add_sdram when origin is None.
- max_sdram_size/min_l2_data_width are no longer exposed as targets arguments this can
still be used enforced directly in the few cases it is useful.
2021-03-29 15:28:31 +02:00
58286ce29e
minispartan6: Change video resolution to 640x480, framebuffer working with Linux-on-LiteX-Vexriscv.
2021-03-29 14:36:34 +02:00
09700b28d0
ulx3s: Change video resolution to 640x480, framebuffer working with Linux-on-LiteX-Vexriscv.
2021-03-29 11:35:55 +02:00
73ce7f9df1
ztex213 fix; propagate variant from targets to platform
2021-03-27 11:04:51 +01:00
7c537748a0
colorlight_i5: Remove PRBS (too specific to application).
...
If useful for several boards, this should probably be provided directly by LiteX.
2021-03-27 09:31:48 +01:00
7737575b88
terasic_deca: Remove --integrated-ram-size parameter (--integrated-main-ram-size provides the same functionnality).
2021-03-27 08:58:49 +01:00
f714e1210a
terasic_deca: Remove enforced CPU variant/debug: --cpu-variant=imac or --cpu-variant=imac+debug can be used for this.
...
The default CPU/Variant is defined in LiteX, enforcing the variant on the target
prevent usage of the other CPUs and also complicate maintenance.
2021-03-27 08:56:46 +01:00
a48def1352
rhsresearchllc_litefury: Remove since already supported by ./acorn.py --variant=cle-101.
2021-03-26 23:54:56 +01:00
4329a69128
sqrl_acorn_cle_215: Rename to sqrl_acorn and add support for all variants (CLE-101, 215 and 215+).
2021-03-26 23:52:36 +01:00
87df45e625
siglent_sds1104xe: Allow build without Etherbone.
2021-03-26 23:25:42 +01:00
c6ced293d4
targets/siglent_sds1104xe: Integrate VideoTerminal/VideoFrameBuffer.
2021-03-26 22:55:25 +01:00
52ded1c9aa
terasic_deca: Fix default_clk_name.
2021-03-26 22:43:40 +01:00
b54eed0859
terasic_sockit: Review/Cleanup for consistency with other boards.
2021-03-26 22:39:19 +01:00
53a767c85c
terasic_deca: Review/Cleanup for consistency with other boards.
2021-03-26 22:12:13 +01:00
be4965ca78
Merge pull request #192 from hansfbaier/deca_fixes
...
terasic_deca: fix cable name, ulpi, names, add gpio_serial
2021-03-26 21:52:31 +01:00
9fea5a7fc6
targets/digilent_nexys_video: Cleanup/Simplify #191 .
2021-03-26 21:49:22 +01:00
df58639916
nexys_video: choose VADJ value with arguments
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-03-26 14:50:05 +01:00
8c0ddd140b
terasic_deca: fix cable name, ulpi, names, add gpio_serial
2021-03-26 10:46:37 +07:00
e2de69496a
targets/lattice_crossing: Avoid direct override of SoCCore.mem_map (break default SoCore.mem_map with updated imports).
2021-03-25 22:41:26 +01:00
b284fe47c3
targets/terasic_sockit: Fix compilation.
2021-03-25 19:35:44 +01:00
22f167dde4
targets/sqrl_acorn_cle_215: Add missing false path constraints.
2021-03-25 18:19:20 +01:00
7d130d6981
targets/pcie: Cleanup.
2021-03-25 17:47:06 +01:00
333fb362ca
Move import Compat directly to litex_boards.__init__.py and simplify.
2021-03-25 16:47:47 +01:00
062b899e29
platforms/targets: Add mode Vendor prefixes.
2021-03-25 16:19:11 +01:00
7633eae360
targets/colorlight_i5: Remove l2-size args (already provided by soc_core_args.
2021-03-25 14:44:52 +01:00
5253a3c43e
test/ci: Fix/Update.
2021-03-25 14:21:13 +01:00
9a45c49918
targets/versa_ecp5: Also add Vendor prefix.
2021-03-25 14:13:32 +01:00
8a3cacae32
boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).
2021-03-25 14:11:17 +01:00
219067ed3a
Merge pull request #190 from kazkojima/colorlight_i5-video
...
colorlight_i5: Integrate Video Terminal and Video Framebuffer with ne…
2021-03-25 10:28:52 +01:00
47bdf5f759
targets: Use new CSR automatic allocation (self.add_csr will still work but is no longer required).
2021-03-25 10:11:24 +01:00
b3786c5e52
fomu/icebreaker: Update Up5KSPRAM import (litex.soc.cores.up5kspram deprecated, still supported for now but triggers a compat notice).
2021-03-24 17:22:55 +01:00
5995769b46
targets: Switch to soc_core_args/soc_core_argdict (instead of soc_sdram that is now deprecated, but still supported for now).
2021-03-24 17:22:51 +01:00
cb4e00c3f2
colorlight_i5: Integrate Video Terminal and Video Framebuffer with new VideoECP5HDMIPHY.
2021-03-20 07:56:59 +09:00
7a1fe7a6bc
nexys4ddr: add pmod connectors, and optional sdcard on pmodd
2021-03-19 12:33:11 -04:00
6d32c76aa2
Merge pull request #188 from hansfbaier/848-deca-video-bloat
...
fix #848 : allow ram initialization in bitstream to enable block ram
2021-03-19 11:11:05 +01:00
ddd46205aa
ulx3s: Integrate Video Terminal and Video Framebuffer with new VideoECP5HDMIPHY.
2021-03-18 15:06:35 +01:00
4330769add
minispartan6: Integrate Video Terminal and Video Framebuffer with new VideoS6HDMIPHY.
2021-03-18 14:10:42 +01:00
b7d86df01d
fix #848 : allow ram initialization in bitstream to enable block ram inference for ROM/RAM with initial value
2021-03-18 08:41:19 +07:00
8b69ee57a6
arrow_sockit: get video terminal working on VGA
2021-03-16 12:31:41 +07:00
75f7120ff9
targets/Ultrascale: Fix build since idelay's reset is now handled by the PLL (with_reset=True).
2021-03-11 10:00:06 +01:00
8d3aaa8ea9
targets/nexys_video: Revert clk100 to avoid breaking Linux-on-LiteX-VexRiscv (we'll remove it when the switch the simple framebuffer will be done).
2021-03-11 09:48:26 +01:00
0e2d9a571e
alveo_u280: Fix copyrights (avoid too much cascading on Platforms/Targets) and generate reset on idelay clock domain (similarly to recent change on others Ultrascale+ boards).
2021-03-10 11:23:27 +01:00
f4ea3fb0d9
Merge pull request #168 from hplp/alveo_u280
...
Alveo U280 board
2021-03-10 11:16:32 +01:00
7c6876df42
Merge pull request #186 from gatecat/mipi_pins_x
...
crosslink_nx_vip: Remove constraints for hard MIPI pins
2021-03-10 11:13:49 +01:00
61f44739d7
Merge pull request #185 from stffrdhrn/arty-jtagbone
...
arty: Add an option to enable jtagbone
2021-03-10 11:12:20 +01:00
47faaf20d5
deca: Integrate Video Terminal (untested, resource issue).
2021-03-09 15:02:30 +01:00
8fb80053f7
targets/versa_ecp5: Fix LiteEthPHYRMGII tx/rx delays (need to be updated due to a bug fix in the ECP5RGMII PHY).
2021-03-08 17:39:13 +01:00
496cae54ff
crosslink_nx_vip: Remove constraint for MIPI pins
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-08 14:26:40 +00:00
9cdcb8cb43
ecpix5: Add Etherbone (--with-etherbone).
2021-03-08 13:45:09 +01:00
52ce49cf0c
arty: Add an option to enable jtagbone
...
Then adds jtagbone for arty. I have tested with the following
litex_server and it seems to work fine.
litex_server --jtag --jtag-config openocd_xc7_ft2232.cfg
Note, the jtagbone and etherbone may be mutually exclusive, but I am not
sure how to define that in the args.
2021-03-08 07:05:54 +09:00
6139bd7eba
Merge pull request #183 from gatecat/vip_split_mclk
...
crosslink_nx_vip: Camera IO fixes
2021-03-06 11:20:53 +01:00
e280bff1ec
targets/video: Simplify/Cleanup integration.
2021-03-05 14:40:27 +01:00
ce669ac8cd
targets/nexys_video: Add optional VideoTerminal/VideoFramebuffer.
2021-03-05 14:33:22 +01:00
547157c9ca
crosslink_nx_vip: Fix cam_reset IO configuration
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-05 11:26:56 +00:00
542001dddf
crosslink_nx_vip: Split camera MCLK to its own resource
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-05 11:18:37 +00:00
21207533b0
targets/Ultrascale(+): Generate Reset to idelay clock domain (to be sure to follow UG571 reset sequence).
2021-03-04 19:49:03 +01:00
71652e8d44
icebreaker: Lower VideoTerminal resolution to use default 24MHz sys_clk.
2021-03-04 18:29:21 +01:00
253d8129af
nexys4ddr: Integrate simple VideoFrameBuffer.
2021-03-03 20:00:31 +01:00
51a0bbfa65
platforms/targets: Harmonize VGA pins and use new Video Terminal on all targets with VGA support.
2021-03-03 18:05:24 +01:00
465a95d2a6
icebreaker/nexys4ddr: Use new LiteXSoC's add_video_terminal method to add the Video Terminal.
2021-03-03 17:47:20 +01:00
3af8ec0c8d
targets/nexys4ddr: Replace VGA terminal with new LiteX's VideoTerminal.
2021-03-03 17:10:22 +01:00
7e3b8ab3b5
icebreaker: Add optional DVI Video Terminal with new LiteX's VideoOut core.
...
Tested with: ./icebreaker.py --cpu-type=serv --with-video-terminal --build --flash
https://twitter.com/enjoy_digital/status/1365324823447171074
2021-03-03 16:21:04 +01:00
aa5c4f9e5a
Merge branch 'master' into arty-numato-sdcard-pmod
2021-02-25 09:37:34 +01:00
768c10c630
targets/arty: rebase/merge PR179, rename adaptor to adapter.
2021-02-25 09:36:26 +01:00
6f558a5d65
Add board support for Terasic/Arrow DECA board
2021-02-25 12:25:43 +07:00
98c80f0b2b
Merge pull request #177 from antmicro/arty-dynamic-ip
...
target/arty: add eth_ip_configurable switch
2021-02-24 09:29:55 +01:00
08ccf384aa
targets/arty: Allow selection of sdcard mod adaptor
...
The default stays with the Digilent/Antmicro layout, but the user can
optionally provide --sdcard-adaptor numato to use the Numato layout.
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-24 14:59:50 +10:30
2b49082696
platforms/arty: Add numato sd card pmod
...
It has a different layout.
Thanks to David for documenting the pinout in this issue:
https://github.com/enjoy-digital/litex/issues/817
Expansion Pin SD SPI SD Artix Arty-A7 PMOD PIN PMOD Index
2 DATA_2 D4 JD1 1 0
4 CMD MOSI D3 JD2 2 1
6 DATA_0 MISO F4 JD3 3 2
CD F3 JD4 4 3
1 DATA_3 CS_N E2 JD7 7 4
3 CLK CLK D2 JD8 8 5
5 DATA_1 H2 JD9 9 6
G2 JD10
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-24 14:59:50 +10:30
ae0d4dc0d8
target/arty: add eth_dynamic_ip switch
2021-02-23 21:01:27 +01:00
aad8154e3a
targets/sds1104xe: Enable both Ethernet/Etherbone with hybrid LiteEthMAC.
2021-02-23 15:27:50 +01:00
5b28c619d5
Merge pull request #178 from yetifrisstlama/vc707_clk
...
fix vc707 default_clk_period
2021-02-23 12:17:45 +01:00
a90c0bc8f9
platforms/sds1104xe: Integrate changes from https://github.com/360nosc0pe/scope .
2021-02-22 13:45:48 +01:00
09c3bd616b
Merge branch 'master' into vc707_clk
2021-02-19 22:49:46 -08:00
c32e790421
vc707: fix default clock frequency
2021-02-19 22:47:18 -08:00
11405d9ee3
targets/sds1104xe/BaseSoC: Enable Etherbone by default also defaults to Crossover UART when kwargs is empty.
2021-02-18 19:30:05 +01:00
1fcd96971d
Merge pull request #172 from hansfbaier/master
...
sockit: Add an option to plug in an UART via the GPIO daughter board, make connector pin numbers one-based
2021-02-16 22:44:52 +01:00
975150ca68
platforms/sds1104xe: fix ddram IOStandard (SSTL15, thanks @tmbinc) and add INTERNAL_VREF on ddram banks.
2021-02-16 17:32:41 +01:00
9baa9d5d83
platform/de10nano: fix programmer (thanks @Godtec, see https://github.com/enjoy-digital/litex/pull/811 ).
2021-02-12 15:23:17 +01:00
9a94e835c3
sockit: Add an option to plug in an UART via the GPIO daughter board
2021-02-10 14:52:19 +07:00
7442c2dada
vc707.py: clk156 add missing constraint
2021-02-08 19:04:01 -08:00
fef9dd036a
platforms/de0nano: directly use JP1 connector for serial pins.
2021-02-08 09:52:26 +01:00
ea58ef94a7
Merge pull request #170 from hansfbaier/master
...
arrow_sockit: add support for MiSTer XS SDRAM modules
2021-02-04 16:44:58 +01:00
38242b713f
Merge pull request #171 from antmicro/symbiflow_nexys_video_support
...
nexys_video: enable symbiflow toolchain
2021-02-04 16:42:34 +01:00
e6d05001aa
use parameter for dram channel 0 or 1 and LedChaser
2021-02-03 17:29:30 -05:00
cdff5e3ca3
nexys_video: enable symbiflow toolchain
...
Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com>
2021-02-03 14:52:54 +01:00
c64e13f687
arrow_sockit: add support for MiSTer XS SDRAM modules
2021-02-03 09:37:03 +07:00
8692ed462f
targets/colorlight_i5: use .bit stream instead of .svf when loading.
2021-02-03 08:17:24 +09:00
31d7f810e7
use SDRAM C1 sysclk and constraints
2021-02-02 11:15:25 -05:00
f32c61d5d2
Merge pull request #163 from garytwong/friendly-incompatible-options
...
Be friendlier about incompatible options.
2021-02-02 08:51:46 +01:00
a1d830566a
added ddr4_sdram_c1 constraints
2021-02-01 12:22:41 -05:00
7c48af9b50
tec0117: get SDRAM working and increase sys_clk_freq to 25MHz.
...
./tec0117.py --build --load
Still some FIXMEs but validate use of the embedded SDRAM with LiteDRAM/LiteX:
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2020 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Feb 1 2021 13:09:35
BIOS CRC passed (5abceb2e)
Migen git sha1: 40b1092
LiteX git sha1: f324f953
--=============== SoC ==================--
CPU: VexRiscv_Lite @ 25MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 24KiB
SRAM: 4KiB
L2: 0KiB
SDRAM: 8192KiB 16-bit @ 25MT/s (CL-2 CWL-2)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2MiB)...
Write: 0x40000000-0x40200000 2MiB
Read: 0x40000000-0x40200000 2MiB
Memtest OK
Memspeed at 0x40000000 (2MiB)...
Write speed: 5MiB/s
Read speed: 6MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> mem_list
Available memory regions:
ROM 0x00000000 0x6000
SRAM 0x01000000 0x1000
SPIFLASH 0x80000000 0x1000000
MAIN_RAM 0x40000000 0x800000
CSR 0x82000000 0x10000
litex> mem_test 0x40000000 0x800000
Memtest at 0x40000000 (8MiB)...
Write: 0x40000000-0x40800000 8MiB
Read: 0x40000000-0x40800000 8MiB
Memtest OK
litex>
2021-02-01 13:32:01 +01:00
51c5d69586
targets/tec0117: use custom CPU/ROM/SRAM config to minimize resources.
2021-02-01 13:31:56 +01:00
538878ce13
tec0117: disable BIOS XIP from SPI Flash for now since not working (SPÏ Flash set to power down mode with bitstream?).
2021-02-01 13:31:51 +01:00
6cce07d9db
tec0117: add spiflash4x pins, rework flash function to flash both bitstream/bios.
2021-02-01 13:31:44 +01:00
0831b33285
tec0117: fix copyrights.
2021-02-01 13:31:39 +01:00
5e4b29c0b5
sockit: Fix cable name, default to jtag_atlantic
2021-02-01 11:48:06 +07:00
601c297c8f
Merge pull request #164 from rdolbeau/ztex213
...
Support file for the ZTEX USB-FPGA Module 2.13
2021-01-30 21:43:07 +01:00
31df53ef0a
Add flash to SPI flash support for board ECPIX5 (needs update to openfpgaloader.py from litex to work)
2021-01-30 13:19:08 +01:00
027e57b851
Support file for the ZTEX USB-FPGA Module 2.13
2021-01-30 05:19:18 -05:00
99e2f04ee5
Be friendlier about incompatible options.
...
Collect --with-ethernet/--with-etherbone, --with-spi-sdcard/--with-sdcard,
etc. into ArgumentParser.add_mutually_exclusive_group()s. That way, we
get pretty --help output, and appropriate error messages if somebody
tries to ask for something that doesn't make sense.
2021-01-29 18:08:38 -07:00
abccd12058
tec0117: add initial SDRAM support for the embedded SDRAM of the SIP.
...
Still a WIP but able to do the P&R with modifications on LiteX to generate
the IO_PORT constraints but not the IO_LOC for the SDRAM pins.
2021-01-29 22:28:40 +01:00
edb99797aa
targets/tec0117: minor cleanups.
2021-01-29 21:25:10 +01:00
345feddce9
ECPIX-5: ddram: Add missing address pin.
...
Fixes #161
2021-01-29 16:03:43 +03:00
7525b8772f
platforms/fpc_iii: avoid dummy pin on ethernet.rst_n.
...
rst_n is optional in LiteEth's PHYs.
2021-01-29 09:33:33 +01:00
19767e1a2a
platforms/fpc_iii: avoid using dummy pin on odt.
...
Now possible with 2f5784432d
2021-01-29 09:30:54 +01:00
3deeb69531
targets/fpc_iii: review/cleanup to increase similarities with others targets to ease maintenance.
2021-01-29 08:46:31 +01:00
6c6d8a1393
platforms/fpc_iii: review/cleanup to increase similarities with others platforms and ease maintenance.
2021-01-29 08:41:10 +01:00
1916677dc9
use VREF constraint for DDR4 C0
2021-01-28 19:58:38 -05:00
4e5bb1bf1e
Add FPC-III board support.
...
FPC-III is the Free Permutable Computer; details on the board are
available from:
https://repo.or.cz/fpc-iii.git
2021-01-28 09:51:42 -07:00
9bd667720d
targets/ecpix5: add LedChaser with red leds.
...
Fits nicely LambdaConcept colors and Blue/Green leds are too bright and would need to be controlled through a PWM.
2021-01-28 14:29:07 +01:00
aa20fca1f1
ecpix5: reorder rgb_leds to have ld7:0, ld8:1, ld5:2, ld6:3.
2021-01-28 14:25:16 +01:00
691bfd8b70
Merge pull request #159 from euryecetelecom/master
...
Add ECPIX5 board components and pinouts (sata/spiflash/PMOD) + review openocd IDs
2021-01-28 14:01:01 +01:00
bd716d956f
netv2: add device variant to allow 100T as well
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-01-28 13:19:53 +01:00
9beba7209d
Add ECPIX5 components and pinouts (pmod/sata/spiflash) + review IDs from ECPIX5 openocd configuration
2021-01-28 12:00:28 +01:00
aef78831c8
colorlight_i5: Use tx_delay=0 for LiteEthPHYRGMII instead of target specifig bios initialization
2021-01-27 18:19:27 +09:00
84656a9c2e
re-compare and adjust to u250
2021-01-26 23:03:09 -05:00
c3fa0eac8b
Add colorlight i5 board support
2021-01-27 11:44:59 +09:00
5fd04a97ea
targets/netv2/pcie: reduce max_pending_requests to 2 to reduce resource usage.
2021-01-26 11:01:51 +01:00
d256cc8bd6
camlink_4k: disable leds when serial is used (since pin is shared).
2021-01-25 12:19:29 +01:00
1e1bec10c4
orangecrab: remove dm_remapping workaround: we are now using Wihsbone/L2 path with VexRiscv-SMP on this board.
2021-01-25 11:52:59 +01:00
537f494cbb
arrow_sockit: review/harmonize with others boards.
2021-01-25 09:14:46 +01:00
4adc1b14c4
platforms/de0nano: use separator for connectors.
2021-01-25 08:58:12 +01:00
bbaa2fdc98
Merge pull request #149 from hansfbaier/master
...
Add board support for Terasic/Arrow SocKit, Add connectors to de0-nano
2021-01-25 08:55:48 +01:00
45f538b1d3
Merge pull request #155 from blakesmith/add_spi_flash
...
ULX3S: Make spiflash optionally accessible from the SoC, and bootable
2021-01-24 21:22:35 +01:00
8132f9f65b
Merge pull request #154 from euryecetelecom/master
...
Fix SDCard issue when no SDCard inserted in ECPIX5 board.
2021-01-24 21:14:58 +01:00
72985c72ca
Merge pull request #153 from Disasm/ecpix5-add-45f
...
ECPIX-5: add option to select ECP5 device
2021-01-24 21:14:14 +01:00
cae51c0c24
ULX3S: Make spiflash optionally accessible from the SoC, and bootable
2021-01-23 14:44:26 -06:00
aa771e9ff4
de0-nano: add connectors
2021-01-23 20:18:15 +07:00
c9f0745d54
sockit: add board definitions for Terasic SocKit
2021-01-23 20:17:38 +07:00
23760e2eae
orangecrab/CRGSDRAM: add missing rst signal (to reset from the SoC).
2021-01-22 22:55:02 +01:00
b386ee5059
Fix SDCard issue when no SDCard inserted in ECPIX5 board. Now enable to detect SDCard presence.
...
https://github.com/litex-hub/linux-on-litex-vexriscv/issues/171
2021-01-20 18:02:13 +01:00
a678672fc9
ecpix5: add option to select ECP5 device
2021-01-19 01:22:52 +03:00
e71a4940c0
nexys4ddr: etherbone support
2021-01-15 12:14:40 -05:00
7a738245af
fix bitstream problem
2021-01-14 21:53:25 -05:00
5a73eb0b6d
initiate target and platform for alveo_u280 board
2021-01-14 18:35:43 -05:00
6a5f2f59a6
targets/orangecrab: use new ECP5DDRPHY's cmd_delay to add extra delay on DDR3's Clock/Commands.
...
This fixes https://github.com/enjoy-digital/litedram/issues/130 and has been tested
at 48/64/96MHz on MT41K64M16 and MT41K512M16 variants.
Also remove un-needed cd_sys2x_eb.
2021-01-12 18:57:22 +01:00
9ff90eb9fe
targets/c10lprefkit: fix default sys-clk-freq.
2021-01-12 16:15:52 +01:00
0a7443d273
targets/orangecrab: make usr_btn optional to fix compilation with revision 0.1.
2021-01-08 19:30:37 +01:00
ae5494d7b6
orangecrab: defaults to USB-ACM UART.
2021-01-08 19:01:41 +01:00
c6e75122d9
sds1104xe: defaults to Crossover UART.
2021-01-08 19:00:41 +01:00
ab72f69937
targets/ac701: rename --ethernet-phy to --eth-phy for consistency with others targets.
2021-01-08 18:50:01 +01:00
0ee62dd681
add etherbone ip address option for relevant boards
2021-01-08 18:44:31 +01:00
869cce2bba
targets/colorlight_5a_75x: rename etherbone-ip args to eth-ip.
...
eth-ip will also be used to configure Ethernet IP addresss.
2021-01-07 09:26:38 +01:00
c829a47c31
targets/colorlight_5a_75x: Automatically disable Led Chaser when serial is used.
2021-01-07 09:17:28 +01:00
adbcc81ecf
Merge pull request #145 from hansfbaier/master
...
colorlight: Add option for etherbone ip address and LED chaser
2021-01-07 09:08:43 +01:00
a6e867c691
Merge pull request #144 from gsomlo/gls-genesys2-sdcard
...
genesys2: LiteSDCard support
2021-01-07 08:12:24 +01:00
d2d17e00a2
Merge pull request #142 from geertu/master
...
platforms/ecp5: Fix slewrate configuration
2021-01-07 08:11:30 +01:00
d73bd2f7ce
targets/xilinx: add comment on sys_clk to pll.clkin false path.
2021-01-07 08:01:54 +01:00
1ac1c6857f
targets/xilinx: add false path constraint between sys_clk and pll.clkin.
...
The SoC reset added recently creates a path between sys_clk and pll.clkin
clock domains that is reported by the tools but that can be safely ignored.
2021-01-07 00:02:46 +01:00
0d69cfa6b0
colorlight: make LEDs optional
2021-01-05 08:03:26 +07:00
4bec17e1a7
colorlight: Add option for etherbone ip address
2021-01-05 07:49:44 +07:00
2589d9f704
genesys2: add (spi-)sdcard build options
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2021-01-04 13:57:21 -05:00
4eb0026a69
genesys2: add "rst" and "cd" signals to (spi-)sdcard records
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2021-01-04 13:10:13 -05:00
4a95b94dbf
platforms/ecp5: Fix slewrate configuration
...
When building linux-on-litex-vexriscv for OrangeCrab:
Warning: IOBUF 'spisdcard_clk' attribute 'SLEW' is not recognised (on line 207)
Warning: IOBUF 'spisdcard_mosi' attribute 'SLEW' is not recognised (on line 210)
Warning: IOBUF 'spisdcard_cs_n' attribute 'SLEW' is not recognised (on line 214)
Warning: IOBUF 'spisdcard_miso' attribute 'SLEW' is not recognised (on line 218)
Platforms using litex.build.lattice.LatticePlatform seem to support only
"SLEWRATE", not "SLEW". Fix the few offenders in the LogicBone and
OrangeCrab platform definitions.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-01-04 17:08:51 +01:00
fe67766fb7
targets/gensdrphy/halfsdrphy: pass new optional sys_clk_freq (used to compute cl).
2021-01-04 11:38:07 +01:00
0e3c03f2f6
mercury_xu5: remove unneeded cmd_latency=0 (now defaulting to 0).
2021-01-04 10:48:34 +01:00
5cc49bafbd
orangecrab: Run reset_timer with por/48MHz clock domain (sys clock domain is now directly reseted on usr_btn press).
2021-01-04 09:42:05 +01:00
1fb24d4c71
orangecrab: Avoid usb clock domain reset on usr_btn press or SoC reset.
...
Allows the USB-ACM link to stay up during reset.
2021-01-04 09:05:19 +01:00
06cb49af37
targets/arty: add variant support through --variant args.
...
./arty.py --variant=a7-35 or a7-100
./arty_s7.py --variant=s7-50 or s7-25
2020-12-29 18:43:14 +01:00
02a81d54e2
targets/ecpix5/eth: set rx_delay to 0ns (tested with netboot on R01).
2020-12-29 16:01:12 +01:00
93779ecb95
platforms/colorlight_5a_75b: revert toolchain args.
...
Useful to do tests with Diamiond.
2020-12-29 14:22:42 +01:00
f2985f1e71
Merge pull request #141 from la6m/Colorlight_v8.0
...
add colorlight v8.0 PCB
2020-12-29 14:20:29 +01:00
84098d2de5
targets/qmtech_wukong: submitted target was the platform file, update with target shared in #133 .
...
Build tested with /qmtech_wukong.py --with-sdcard --with-ethernet --integrated-rom-size=0x10000 --build.
2020-12-29 14:13:11 +01:00
b67b18caad
qmtech_wukong: review/cleanup platform.
2020-12-29 14:10:49 +01:00
3e6b934961
add colorlight v8.0 PCB
2020-12-29 13:52:13 +01:00
e380f24655
targets/qmtech_wukong: +x.
2020-12-29 13:24:41 +01:00
4b721eded7
add QmTech Wukong board support.
2020-12-29 13:20:42 +01:00
9beaf25822
nexys4ddr: fix eth/int_n pin (B8) and use 4-bit on vga.blue.
2020-12-24 10:15:29 +01:00
2a04c5c74e
nexys4ddr: add support for litexvideo VGA Terminal
...
This commit adds VGA support for the Nexys A7/ Nexys 4 DDR.
The VGA is however limited to RGB443 instead of the full 12bit RGB444.
This is because IO D8 which is MSB for Blue, is also used for ETH int_n.
This makes the final output have a yellow tint.
2020-12-23 02:24:18 +05:30
f6a106cdf4
Fix orangecrab target
2020-12-20 01:07:43 +03:00
00fc2c5166
targets/orangecrab: use new DM remapping capability of LiteDRAM to fix LDM/UDM.
...
Required by VexRiscv-SMP that uses DMs on LiteDRAM interface.
2020-12-16 11:52:58 +01:00
bb58258fd4
Fix de10nano target
2020-12-14 15:27:33 +03:00
ec4ccc9fa5
platforms/xcu1525: fix ddram 1/2/3 pinout.
...
DDR4 now validated successfully with LiteDRAM on the 4 channels.
2020-12-11 13:58:26 +01:00
519f9449fa
targets/sds1104: litex_term now directly supports crossover uart.
2020-12-10 13:56:01 +01:00
18337cdf25
targets/arty: sync with litex repository
...
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
2020-12-07 17:32:40 +01:00
f66860c201
zybo_z7: fix clock pin constraint
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2020-12-07 16:46:20 +01:00
8e5f955e4e
targets/orangecrab: Fix --sdram-device help text
...
Obviously --sdram-device takes the SDRAM device, not the ECP5 FPGA
device.
Fixes: bf3c9dc9bf
2020-12-04 14:34:01 +01:00
fe563baec7
targets/fomu: modification to ValentyUSB no longer required.
...
Following commits make it generic/portable while still using IOBuffers:
77b9d01058371526e432
2020-11-27 19:40:45 +01:00
5a4e28d47d
target/usb_acm: switch git clone to litex-hub/valentyusb repo (up to date with LiteX).
2020-11-27 18:53:45 +01:00
8d1095224f
add support for redpitaya14/16
2020-11-26 06:54:11 +01:00
11fa5c34ac
nexus: Allow selection of toolchain
...
Signed-off-by: David Shah <dave@ds0.me>
2020-11-25 09:45:25 +00:00
159a0c751c
targets/colorlight_5a_75x: update instructions and LiteEthPHYRGMII's tx_delay (required with LiteEth fixes).
2020-11-23 12:30:36 +01:00
03bb929f27
colorlight_5a_75x: add LedChaser.
2020-11-23 10:14:20 +01:00
d18deef10d
colorlight_5a_75x: switch prog to FT232 based programmer (ex: JTAG HS2).
2020-11-23 10:13:57 +01:00
ce38cff41d
mercury_xu5: reduce cmd_latency to fix problems with DRAM leveling
2020-11-20 15:31:47 +01:00
a2f3add24e
Merge pull request #123 from teknoman117/litefury
...
Support for the RHS Research LiteFury
2020-11-20 08:44:27 +01:00
389b623fe2
targets/litefury: new target
...
LiteFury is an Artix-7 development board in the M.2 form factor
for PCIe accelerator development. It's similar to the Aller but
with an xc7a100t rather than an xc7a200t and no TPM module.
https://rhsresearch.com/collections/rhs-public/products/litefury
2020-11-19 21:52:14 -08:00
49e1c34dfd
targets/acorn_cle_215: add SATA.
2020-11-18 19:14:18 +01:00
778ce53865
targets/xcu1525: add SATA.
2020-11-17 15:27:42 +01:00
27e19644f4
targets/kcu105: add SATA.
2020-11-16 18:44:18 +01:00
27f60b2e93
add initial Siglent SDS1104X-E support (Ethernet & DDR3 validated).
...
Pinout from https://github.com/360nosc0pe project.
2020-11-13 12:20:15 +01:00
d42af3ea19
targets: add --sys-clk-freq support to all targets.
2020-11-12 18:07:28 +01:00
72afb95329
targets: create platform on BaseSoC for all targets (consitency).
2020-11-12 16:57:31 +01:00
843e724e3d
targets/pcie: simplify using new LiteX's add_pcie method and enable it on all devices supported by LitePCIe.
2020-11-12 16:39:42 +01:00
9f11bfb0d1
qmtech_ep4ce15: convert name to lowercase, minor cleanup and add to test_targets.
2020-11-12 14:33:45 +01:00
31eb74dc2d
Merge pull request #122 from baselsayeh/master
...
add Qmtech EP4CE15 coreboard support
2020-11-12 14:27:49 +01:00
46e8a957fe
platforms/zybo_z7: fix default_clk typo.
2020-11-12 14:26:36 +01:00
ac075f18c7
platforms/crosslink_nx_evn/vip: add default_clk.
2020-11-12 14:26:17 +01:00
f3ccd140c2
targets/simple: add try/except on leds.
2020-11-12 14:26:00 +01:00
0fc67ddfdb
update copyright
2020-11-12 15:25:39 +02:00
7c6df67739
targets: add tinyfpga_bx target (based on icebreaker/fomu targets).
2020-11-12 14:09:25 +01:00
302e4ffdff
targets/simple: simplify (only keep minimal SoC + Leds) and add load argument.
...
ex of use:
./simple.py litex_boards.platform.ulx3s --build --load
./simple.py litex_boards.platform.trellisboard --build --load
./simple.py litex_boards.platform.arty --build --load
etc...
2020-11-12 13:54:30 +01:00
a4d05522d4
platforms/ice40/ecp5: add toolchain parameter with default to trellis (ECP5) or icestorm (iCE40).
...
Required to simplify simple.py target and use trellis/icestorm as default toolchain.
2020-11-12 13:33:30 +01:00
5cf7731f37
targets/netv2: add PCIe.
2020-11-12 12:16:01 +01:00
7a9f175450
targets/pcie: remove force of csr_data_width to 32 (this is now the default) but just add a check on the pcie block.
2020-11-12 12:08:20 +01:00
4401fec1e6
targets: remove add_csr("crg") (no longer needed).
2020-11-12 11:54:11 +01:00
bd4e92ad13
targets: cleanup, uniformize build arguments between targets.
2020-11-12 11:46:00 +01:00
1b1ed5ebf1
add Qmtech EP4CE15 coreboard support
2020-11-12 01:56:36 +02:00
5fbb176c2a
targets/crosslink_nx: update NXLRAM import.
2020-11-09 11:05:18 +01:00
afe44e2bd6
targets/crosslink_nx_evn: update NXPLL import.
2020-11-09 10:25:30 +01:00
39d979a9d3
targets/Ultrascale: add missing AsyncResetSynchronizer import.
2020-11-09 10:25:05 +01:00
97b64d16a6
Lattice NX PLL Support
2020-11-08 20:34:46 -06:00
1f52fbaca6
xcu1525: fix last ddram channel numbering.
2020-11-06 10:48:26 +01:00
2b17dc1b89
target: add rst signal to CRG to allow full reset of the SoC on reboot command.
2020-11-04 11:13:42 +01:00
aa6b9cab4a
targets/crosslink_nx_vip: +x.
2020-11-04 09:30:57 +01:00
ce14775dfb
targets/tec0117: move SerialFlashManager import to flash function.
2020-11-04 09:30:31 +01:00
2da4eabffe
platforms/icebreaker: fix refactoring typo.
2020-11-04 09:30:01 +01:00
c093d0d0fc
platforms: cleanup pass to uniformize comments/separators/orders.
2020-11-03 10:48:57 +01:00
8d26c241cd
kc705: revert sys_clk_freq to 125MHz.
2020-11-02 19:51:48 +01:00
babf638c2b
targets/nexys_video: add SATA support.
2020-11-02 19:43:25 +01:00
d1c9cc7553
Add LFE5U-12F device for ULX3S
2020-11-01 23:45:32 +00:00
e950a4a588
targets/kc705: update sata pads.
2020-10-30 17:12:59 +01:00
a410e447e1
targets/kc705/sata: enable write support.
2020-10-30 14:51:40 +01:00
d626861e95
platforms/acorn_cle_215: add serial_io (on P2).
2020-10-29 12:10:12 +01:00
f9252fdd45
targets/kc705: simplify SATA using LiteX's add_sata integration method.
2020-10-29 10:16:40 +01:00
7da8628fba
targets/kc705: switch SATA to gen2.
2020-10-28 19:09:30 +01:00
931f6667ac
targets/kc705: add initial SATA support.
2020-10-26 15:15:24 +01:00
51934567fe
Merge pull request #118 from daveshah1/lifcl-vip
...
Add CrossLink-NX VIP board platform and target
2020-10-22 11:03:47 +02:00
a38c1e7062
mist: add copyrights.
2020-10-22 10:48:58 +02:00
20720693c4
crosslink_nx_vip: Add HyperRAM support
...
Signed-off-by: David Shah <dave@ds0.me>
2020-10-22 09:15:40 +01:00
b278d8bccc
Add CrossLink-NX VIP board platform and target
2020-10-22 09:15:35 +01:00
4541c39e94
Initial support for the MIST board ( https://github.com/mist-devel/mist-board/wiki )
2020-10-17 12:28:22 +02:00
814e7630e4
targets/xilinx: use generic name for idelay clk (avoid clk200, clk400, etc...) since we somtimes want to change it.
2020-10-13 12:10:29 +02:00
06137452d2
targets/xcu1525: use ddram_channel to select clk300.
2020-10-13 11:57:00 +02:00
982cfd5ad5
platforms/xcu1525: fix ddram constraints, add clk300 constraints for all channels.
2020-10-13 11:50:36 +02:00
c3ea04b6e9
targets/s7/us: update sdram (manual cmd_latency no longer needed).
2020-10-12 18:46:21 +02:00
ddf7038c78
ulx3s: add 1.7 and 2.0 revisions support.
2020-10-12 13:23:26 +02:00
204d22c62b
Merge pull request #115 from BryanJacobs/master
...
platforms/ulx3s: Update ULX3S SD pins for revision 2.0
2020-10-12 12:55:17 +02:00
3b11e60fb1
Update ULX3S SD pins for revision 2.0
2020-10-11 14:17:48 +11:00
5e67853a21
versa_ecp5: Add --eth-phy to select ethernet phy
...
This also simplifies the logic a bit.
2020-10-09 23:56:16 +02:00
477734ff06
versa_ecp5: Add etherbone support
...
Etherbone can be enabled with --with-etherbone
2020-10-09 00:53:08 +02:00
55da8b867a
platforms/zedboard: minor cleanups to uniformize with other platforms.
2020-10-07 11:25:20 +02:00
e225cbd28f
add zedboard platform to CI
2020-10-06 11:35:03 -07:00
8ee20a3f30
clean up imports
2020-10-06 11:24:34 -07:00
865c2bd98c
zedboard platform: clean up
...
* remove unused code
* remove oled integration code
* openocd = default programmer
2020-10-06 11:00:36 -07:00
94ef096e77
Merge branch 'master' of https://github.com/litex-hub/litex-boards into HEAD
2020-10-06 10:05:34 -07:00
fff20f7532
targets/fomu: base it on iCEBreaker target + USB-ACM.
...
This uniformizes Fomu target with others, provide a simple example of LiteX SoC
on Fomu and will ease maintenance.
2020-10-06 11:39:30 +02:00
12aed44577
add zedboard platform
2020-10-06 00:28:54 -07:00
79ef091a06
Merge pull request #110 from pepijndevos/gowin
...
Add initial support for Trenz TEC0117 board
2020-10-05 19:50:09 +02:00
2ee32f2a15
Merge pull request #109 from geertu/orangecrab-Fix-r0.1-user_led-mapping
...
orangecrab: Fix r0.1 user_led mapping
2020-10-02 09:40:41 +02:00
062fbd6c63
Merge pull request #108 from daveshah1/dave/nx-evn-doc
...
crosslink_nx_evn: Improve documentation on UART jumpers
2020-10-02 09:40:04 +02:00
18e5def9f2
don't verify erase, very slow
2020-10-01 08:41:16 +02:00
81e4f1f158
add initial support for Trenz TEC0117 board
2020-09-30 14:01:36 +02:00
b2e34f5faf
orangecrab: Fix r0.1 user_led mapping
...
On r0.1, all three user_leds are mapped to the same pin.
Fix this by mapping them to the pins connected to the individual
channels of the RGB LED, to match the comments, the schematics, and the
spirit of r0.2.
Untested on real hardware (I have r0.2 only).
Fixes: c94cbae0c0
2020-09-25 10:33:21 +02:00
Hans Baier
enjoy-digital
Fabien
Sergiu Mosanu
Karol Gugala
Jędrzej Boczar
Shinken Sanada
Vegard Storheil Eriksen
Romain Dolbeau
Alessandro Comodi
Kaz Kojima
Gabriel Somlo
gatecat
Stafford Horne
Joel Stanley
Aleksandra Swierkowska
Michael Betz
Jan Kowalewski
Guillaume REMBERT
Gary Wong
Vadzim Dambrouski
Blake Smith
Vadim Kaushan
Geert Uytterhoeven
la6m
Sahaj Sarup
Robert Winkler
Gwenhael Goavec-Merou
David Shah
Nathaniel R. Lewis
Basel Sayeh
davidcorrigan714
Kevin Mehall
YanekJ
Bryan Jacobs
Konrad Beckmann
Pepijn de Vos