83457b8791
platforms/arty: add _sdcard_pmod_io.
2020-05-20 12:09:43 +02:00
8158d94ae7
targets/c10lprefkit: switch to litehyperbus.
2020-05-19 15:48:19 +02:00
587caf7584
paltforms/marblemini: add break_off_pmod.
2020-05-19 15:42:53 +02:00
c2cd863658
platforms/ecp5_evn: rename spiflash1x to spiflash, rewrite hardware/configuration description and remove make_spiflash.
...
The Platform file should not contain import code related to cores, this has to be done in the target.
2020-05-19 15:29:25 +02:00
3f0f12011b
Merge pull request #70 from ilya-epifanov/ecp5-evn-spi1x-and-flash-params
...
ECP5-EVN SpiFlash parameters
2020-05-19 15:16:25 +02:00
b9ee3a797a
alveo_u250: re-organize the auto-generated IOs, add build/load parameters.
2020-05-16 11:47:14 +02:00
c0b7afc739
targets/alveo_u250: +x.
2020-05-16 11:13:01 +02:00
67d2a4940e
tools/extract_xdc_pins: +x.
2020-05-16 11:12:46 +02:00
482d7a6b95
targets/pcie: use 128-bit datapath and 8 max_pending_requests on pcie_x4 configurations.
2020-05-14 15:34:00 +02:00
2bb7fce5e3
targets/acorn_cle_215: add minimal instructions to reproduce the results.
2020-05-13 17:55:52 +02:00
6757c4e298
Merge pull request #71 from daveshah1/alveo_u250
...
[WIP] Add Alveo U250 platform and target
2020-05-13 09:10:22 +02:00
c7404e356f
targets/acorn_cle_215: switch to MT41K512M16 (Acorn has a 1GB DDR3 vs 512MB on NiteFury).
2020-05-09 16:39:17 +02:00
d05b10fd76
target/camlink_4k: add missing import.
2020-05-09 12:27:07 +02:00
4faa91c7f2
platforms/marblemini: review/cleanup.
...
- add copyrights.
- add link to documentation.
- reindent code.
- rename some IOs (for consistency with the others platforms).
- add pullup on clk20_vcxo_en.
- set clk20_vcxo as default clock.
- remove ununnecessary eth constraints. (we are using IO primitives).
- move PMODS to connectors (for consistency with others platforms).
2020-05-09 10:16:42 +02:00
4ffdcb5ea9
Merge pull request #75 from jersey99/marblemini
...
Marblemini [https://github.com/berkeleylab/marble-mini/ ]
2020-05-09 09:39:40 +02:00
e4ccfcfad1
platforms/marblemini.py: Cleanup. Add openocd for programming marblemini
2020-05-08 17:20:14 -07:00
6f22f082ff
targets: add LedChaser on platforms with user_leds.
...
Default to Chaser mode and similar user interface than GPIOOut.
2020-05-08 22:16:13 +02:00
b9a0f2363c
Merge pull request #74 from tommythorn/master
...
targets/orangecrab.py: propagate command arguments
2020-05-08 07:28:05 +02:00
a7d6de78ae
Merge branch 'master' into marblemini
2020-05-07 12:19:47 -07:00
5f7f087cba
community/platforms/marblemini.py: Added marblemini from https://github.com/berkeleylab/marble-mini/
2020-05-07 12:17:42 -07:00
19b12fd984
targets/panol_logic_g2: replace with a minimal target.
2020-05-07 16:36:04 +02:00
99c04358bf
platforms/pano_logic_g2: simplify/cleanup.
2020-05-07 16:35:34 +02:00
6b5492a707
pano_logic_g2: add copyrights.
2020-05-07 15:24:03 +02:00
6ddd859309
add pano_logic_g2 from litex-buildenv.
2020-05-07 15:22:22 +02:00
27c242b2ca
targets/pcie: switch to PCIe X4 on all boards that support it.
2020-05-07 12:18:39 +02:00
f9939532b6
targets/pcie: update LitePCIe constraints.
2020-05-07 12:15:52 +02:00
6335717eca
targets/orangecrab.py: propagate command arguments
...
The parsed args are stripped off by soc_core_argdict() (called from
soc_sdram_argdict() so we have to pass them explicitly (or pass the
original "args", but this mimics the rest of the code in the repo).
This fixes #72
2020-05-06 18:24:11 -07:00
d34c3baf15
prog: use different openocd config files for FT232/FT2232.
2020-05-06 16:14:51 +02:00
117d1a1c75
prog: add colorlight_5a_75b openocd config.
2020-05-06 16:01:59 +02:00
e500d90bcc
platforms/ecpix5: set pullups on rx_data to advertise as RGMII mode.
2020-05-06 16:00:46 +02:00
59e8c2cd30
acorn_cle_215: add .bin generation and --flash argument, working on hardware :).
2020-05-06 12:27:07 +02:00
a049fa6856
add Acorn CLE 215+ platform/target.
2020-05-06 07:53:55 +02:00
da61aabc5b
targets: remove USDDRPHY_DEBUG and set cmd_latency to on all Kintex7/Ultrascale targets.
2020-05-05 16:32:10 +02:00
b58b9b9e6a
platforms: fix CI.
2020-05-05 16:01:43 +02:00
2d9543b65e
targets: add build/load parameters on all targets.
2020-05-05 15:11:47 +02:00
19eb5708de
platforms: make sure all traditional platforms have a create_programmer method.
2020-05-05 13:34:57 +02:00
84468c2a63
targets/CRG: platforms are now automatically constraining the input clocks.
2020-05-05 11:51:57 +02:00
1f88a9d5ec
platforms: make sure clocks inputs are constraints on all platforms.
...
Also use new loose lookup_request to simplify constraints.
2020-05-05 11:45:41 +02:00
86648ec7d8
platforms/vcu118: rename ddram_second_channel to ddram:1.
2020-05-05 09:54:11 +02:00
e1820c7831
platforms/ac701: indent HPC.
2020-05-05 09:49:59 +02:00
2129b67779
platforms: make sure all plarforms have separators.
2020-05-05 09:47:55 +02:00
ea0eda9f75
platforms: make sure all Xilinx/Altera platforms have a create_programmer method, use OpenOCD on Spartan6 and 7-Series.
2020-05-05 09:42:34 +02:00
588bbac719
add prog directory with some Xilinx OpenOCD configurations files.
2020-05-05 09:11:06 +02:00
78b5727774
targets: rename usb_cdc to usb_acm.
...
As discussed recently on Discord.
2020-04-30 21:48:10 +02:00
088cceca8b
Add Alveo U250 platform and target
...
Signed-off-by: David Shah <dave@ds0.me>
2020-04-29 12:31:16 +01:00
0ba8045789
Added spiflash1x pins, a method to create an SpiFlash instance and a note on a second UART channel of FT2232H
2020-04-28 21:56:33 +02:00
2213d73b89
targets/kcu105: use cmd_latency=1.
2020-04-25 12:13:49 +02:00
a8a42c55c9
targets/kc705: manual DDRPHY_CMD_DELAY adjustment no longer needed.
2020-04-25 11:08:05 +02:00
865b01ec75
ecpix5: add ethernet.
2020-04-22 20:21:59 +02:00
6fe4c4ea62
ecpix5: add DDR3 (working)
2020-04-22 17:03:22 +02:00
efb13bc118
add mininal ECPIX-5 board support (Clk/Rst/Leds/UART), BIOS working.
2020-04-22 16:31:07 +02:00
4154bdf034
targets/PCIe: add PCIe software reset.
2020-04-20 12:30:09 +02:00
4ad6042e07
platforms/de0nano: swap serial tx/rx to ease use of cheap FT232 based cables.
2020-04-18 11:36:18 +02:00
4185a019f5
targets: manual define of the SDRAM PHY is no longer needed.
2020-04-16 11:25:59 +02:00
cb95962850
targets/ulx3s and colorlight_5a_75b: cleanup USB ACM addition and only keep USB ACM changes.
...
- remove update in loading/flashing: we need to thinks how to integrate this.
- remove specific README: documentation is moved to the files, link to more complete project can
be added if maintained externally, as done for the iCEBreaker for example.
- revert default freq on ULX3S to 50MHz and instantiate a second PLL as done on the colorlight.
2020-04-14 16:14:18 +02:00
f79a010a29
Addition of flash for colorlight board
2020-04-14 14:37:56 +01:00
389e8aa13a
Addition of USB ACM for ECP5
2020-04-14 13:53:46 +01:00
a12faae0fb
targets/colorlight_5a_75b: increase sys_ps phase (fixes memtest).
2020-04-14 11:24:16 +02:00
52c9648176
arty_s7: fix copyrights, rename to arty_s7, various minor changes to make it similar to others targets.
2020-04-13 15:20:36 +02:00
bbb1ded9f8
Added Arty S7 board
...
As the pin-out is totally different from the A7 board I did put this
in a separate class and not as a variant of the Arty board.
Used migen Arty S7 board file and Digilent xdc file as reference.
2020-04-12 21:48:25 +02:00
188d4a45d6
targets: use DDROutput on sdram_clock and similar configuration for all SDRAM targets.
2020-04-10 14:43:04 +02:00
ca197af2be
targets/simple: use CRG from litex.build.
2020-04-10 10:26:19 +02:00
b8a648d499
litex.build: update from migen.genlib.io litex.build.io.
2020-04-10 09:23:33 +02:00
4d7135f167
platforms/versa_ecp5: remove LatticeProgrammer (no longer used since we can now use OpenOCD).
2020-04-09 23:06:57 +02:00
2cf3c3e845
platforms: cosmetic cleanups.
2020-04-09 23:05:13 +02:00
df5de8816d
platforms/ulx3s: cleanup, fix user_leds, add PULLMODE/DRIVE constraints on SDRAM.
2020-04-09 18:53:06 +02:00
467b14a0ad
colorlight_5a_75b: minor comment changes.
2020-04-09 08:14:17 +02:00
15a27d40fa
targets/colorlight_5a_75b: Change baudrate to work on v6.1
...
There seems to be some capacitance on KEY+, so the usual 115200 don't work
2020-04-09 05:08:23 +02:00
4fc9df8414
colorlight_5a_75b/v6.1: Add eth_clock & serial pins
2020-04-09 05:06:08 +02:00
4ddde31429
colorlight_5a_75b/v6.1: Fix bank activate pin
2020-04-09 05:05:29 +02:00
9b3f16af1e
Merge pull request #62 from ilya-epifanov/ecp5-evn-button1-and-spi-flash-ios
...
ECP5-EVN board: Added BUTTON_1 and SPI flash pins to IOs
2020-04-08 09:00:12 +02:00
db67dff0ea
targets/de10lite: use Max10PLL, remove 50MHz limitation.
2020-04-08 08:55:30 +02:00
8ccab03358
targets/c10lprefkit: use Cyclone10LPPLL, remove 50MHz limitation.
2020-04-08 08:34:59 +02:00
4cdc121327
targets/de10nano: use CycloneVPLL, remove 50MHz limitation.
2020-04-08 08:11:04 +02:00
2d8a4ef9ec
targets/de1_soc: use CycloneVPLL, remove 50MHz limitation.
2020-04-08 08:07:37 +02:00
cec4cbb6dc
targets/de2_115: use CycloneIVPLL, remove 50MHz limitation.
2020-04-08 08:03:41 +02:00
1fac6077fb
targets/de0nano: use CycloneIVPLL, remove 50MHz limitation.
2020-04-07 17:01:58 +02:00
5f629c203b
targets/vcu118: fix clk500 typo.
2020-04-07 13:53:22 +02:00
a7fbe0a724
colorlight_5a_75b: add SoC with regular UART (on J19).
2020-04-03 10:28:53 +02:00
19e5366ad1
targets/colorlight_5a_75b: update sys/sys_ps phases.
2020-03-31 18:18:45 +02:00
9ae8a0cc11
colorlight_5a_75b/v7.0: add spiflash pins.
2020-03-31 16:18:12 +02:00
a43072ac40
ECP5-EVN board: Added BUTTON_1 and SPI flash pins to IOs
2020-03-28 13:08:46 +01:00
ccfc021c1a
Merge pull request #61 from ilya-epifanov/ecp5-evn-programming
...
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 12:59:19 +01:00
8afc9a5b03
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 11:27:34 +01:00
89dd00d3a2
platforms/aller: rename pcie to pcie_x4 (for consistency with others platforms).
2020-03-27 13:01:36 +01:00
d2edf54ab3
zcu104: add fully working SO-DIMM config
2020-03-26 16:37:11 +01:00
3b91e96c42
targets/add_constant: avoid specifying value when value is None (=default)
2020-03-26 09:47:22 +01:00
555bf6c4dc
targets/Ultrascale(+): enable USDDRPHY_DEBUG.
2020-03-26 09:17:09 +01:00
4053c02d7e
targets/orangecrab: add USB PLL for USB CDC with ValentyUSB.
2020-03-25 19:38:36 +01:00
85f38876c2
targets: update PCIe on Numato targets.
...
Should be compatible with software from: https://github.com/enjoy-digital/netv2 .
2020-03-25 11:53:52 +01:00
6e6b6dac55
platforms/orangecrab: add spisdcard pins.
2020-03-25 10:21:57 +01:00
87fd4dc059
platforms/minispartan6: add spisdcard pins.
2020-03-25 09:53:04 +01:00
24033e331c
targets: update SDRAM to use new GENSDRPHY and new ECP5PLL phase support.
2020-03-24 19:59:42 +01:00
92f793f9c5
platforms: remove versa_ecp3 (ECP3 no longer supported).
2020-03-24 19:58:12 +01:00
eb35ec92ba
orangecrab: combine revisions in target
2020-03-23 09:20:01 +10:30
159360da2c
orangecrab: Add r0.2 support
2020-03-22 21:04:07 +10:30
bf3c9dc9bf
orangecrab: Add sdram selection option
2020-03-22 20:41:12 +10:30
88d3f1d63e
orangecrab: r0.1 OrangeCrab fixes
2020-03-22 20:14:29 +10:30
78224b1e56
targets/colorlight_5a_75b: add SDRAM.
2020-03-21 22:11:47 +01:00
a95a4eed3f
targets/colorlight_5a_75b: switch to add_ethernet/add_etherbone methods.
2020-03-21 21:50:05 +01:00
7bba5caab0
targets/c10prefkit: remove keep attributes (no longer needed, added automatically).
2020-03-21 21:44:44 +01:00
6c31933e89
targets: switch to add_etherbone method.
2020-03-21 21:40:45 +01:00
159386e3d3
targets: always use sys_clk_freq on SDRAM modules.
2020-03-21 20:00:56 +01:00
3fb3ba18e8
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-21 18:29:52 +01:00
83e6fb29f8
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-21 12:43:39 +01:00
33bf1d3ee2
Merge pull request #58 from gsomlo/gls-trellisboard-spisdcard
...
Move trellisboard target to SoCCore, add SPI-mode SDCard support
2020-03-20 19:07:00 +01:00
fb1cab857a
targets/arty: use new ISERDESE2 MEMORY mode.
2020-03-20 18:59:17 +01:00
f021c1de5f
targets/trellisboard: add '--with-spi-sdcard' build option
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-20 07:14:13 -04:00
69a78c8c66
targets/trellisboard: switch to SoCCore, use add_ethernet() method
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
396b0383c8
platforms/trellisboard: fix "sdcard" pads, add "spisdcard" pads
...
Add support for SPI-mode SDCard interface. Also, add pull-up and
slew constraints to the standard sdcard interface.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
d0d047dfa4
platforms/ulx3s: add spisdcard pins.
2020-03-19 15:14:05 +01:00
6ab13a0661
de10nano/MiSTer: rename SPI SD CARD pins to spisdcard and remove SPI SD Card integration from target.
2020-03-19 11:09:48 +01:00
db9d5489ec
Merge pull request #56 from rob-ng15/master
...
de10nano add in support for MiSTer secondary sd card
2020-03-19 11:07:40 +01:00
57bcadb5b4
platforms/nexys4ddr: add spisdcard pins.
2020-03-19 11:04:11 +01:00
f3d7f5880f
platforms/kcu105: fix pcie tx0 p/n swap.
2020-03-18 19:09:52 +01:00
bc6ef0bc48
Allow access to secondary sd card via hardware spi bitbanging
2020-03-18 12:13:37 +00:00
a6f80694cb
Add in support for secondary sd card via spi hardware bitbanging
2020-03-18 12:11:57 +00:00
a99d258411
targets/icebreaker: use simplified version closer to the others targets.
...
Add description of the board, link to the crowdsupply campaign and to the more complete example.
2020-03-13 09:43:43 +01:00
74a5ffb9ef
targets/Ultrascale+: use 500MHz IDELAYCTRL reference clock.
...
The minimum is 300MHz on Ultrascale+ vs 200MHz on Ultrascale.
2020-03-10 16:58:30 +01:00
e2a66090ee
targets/Ultrascale(+): simplify CRG using USIDELAYCTRL.
2020-03-10 16:55:22 +01:00
cf58550bba
targets/Ultrascale+: use USPDDRPHY.
2020-03-10 16:06:48 +01:00
ce922613a7
Merge pull request #55 from antmicro/jboc/mercury-xu5
...
platforms/mercury_xu5: fix sdram timing issues
2020-03-10 15:30:12 +01:00
90de99eb46
platforms/mercury_xu5: fix sdram timing issues
2020-03-10 15:03:31 +01:00
75286f8a9b
platforms/zcu104: add missing INTERNAL_VREF on bank 64 (DQ0-31)
2020-03-10 14:57:39 +01:00
95e1a05bf1
platforms/Ultrascale: avoid unnecessary {{}} on INTERNAL_VREF.
2020-03-09 09:29:49 +01:00
3f191c8561
mercury_xu5: set INTERNAL_VREF to 0.84. (similar to others Ultrascale boards with DDR4).
2020-03-09 09:28:25 +01:00
f4ae21a7a2
zcu104: fix copyrights.
2020-03-09 09:24:06 +01:00
5031c11d57
mercury_xu5: add missing copyrights.
2020-03-09 09:23:08 +01:00
8c535d15f2
platforms/mercury_xu5: replace ' with ".
2020-03-09 09:21:27 +01:00
dc1371108d
Merge pull request #52 from antmicro/jboc/mercury-xu5
...
add Enclustra Mercury XU5 board
2020-03-09 09:11:15 +01:00
2b1b9684de
targets/icebreaker: simplify CRG, just use a 12MHz sys_clk and por_clk for reset.
2020-03-07 18:25:26 +01:00
9416ddd84a
targets/icebreaker: simplify arguments and make it closer to others targets.
2020-03-07 18:13:02 +01:00
992f7066fa
targets/icebreaker: simplify leds.
2020-03-07 18:12:59 +01:00
682316214c
targets/icebreaker: use specific method to set Yosys/Nextpnr settings. Rename argument to nextpnr-xxyy.
2020-03-07 18:12:52 +01:00
f777d4b08c
targets/icebreaker: +x
2020-03-05 23:11:35 +01:00
6f517ad1d6
targets/ecp5: make sure all BaseSoC/EthernetSoc default to trellis.
2020-03-05 10:57:59 +01:00
d002059e0b
add Enclustra Mercury XU5 board
2020-03-05 10:52:32 +01:00
745c99ba14
icebreaker: Updated to build on newer litex. Disabled bios building.
2020-03-05 00:12:18 -08:00
3ac9d927a9
targets: icebreaker: Minor style fixes.
2020-03-05 00:12:18 -08:00
738967176c
targets: icebreaker: set the boot address to point to SPI flash
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
093e4913c4
targets: icebreaker: hack to get boot working
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
77b780eb4b
targets: icebreaker: switch to single SPI
...
The Icebreaker doesn't have the QE/ bit set in config, so default to
using single SPI.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
e6dcdc31ed
targets: icebreaker: fix cpu and add spi flash
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
0185095782
targets: icebreaker: fix argument parsing for cpu
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
f0dd31f6c8
target: targets: add crg and begin getting it working
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
ce9b67e2ee
Added icebreaker platform and target.
...
Target is heavily based on Fomu.
2020-03-05 00:12:18 -08:00
7b4ca20ff4
platforms.colorlight_5a_75b: add J1-J8 connectors
2020-02-28 06:09:44 -08:00
be5ed35871
targets: default to trellis toolchain on all ECP5 targets (now able to build all supported targets).
2020-02-28 09:46:54 +01:00
b44885d222
vc707: fix copyrights (Michael Betz is the initial author)
2020-02-28 08:39:52 +01:00
b89af28a05
targets/kc705: use DDRPHY_CMD_DELAY to center write leveling.
2020-02-27 12:58:52 +01:00
aaa10c69eb
platforms/colorlight_5a_75b: add default_clk_name/period
2020-02-27 11:16:49 +01:00
d8de4fbdfb
platforms/targets: keep in sync with LiteX
2020-02-27 11:06:53 +01:00
18f65a7f9d
platforms/kc705: cleanup ddram.
2020-02-27 11:06:35 +01:00
d4460c11a5
platforms/kcu105/vcu118: remove PRE_EMPHASIS/EQUALIZATION on dm.
2020-02-27 10:43:41 +01:00
58f588f69e
platforms/zcu104/ddram: add PRE_EMPHASIS/EQUALIZATION settings
2020-02-27 10:43:01 +01:00
d87b8b3c66
zcu104: add separate ddram_32/64 definitions and use ddram_32 for now.
...
Ease switching between ddram_32 and ddram_64.
2020-02-27 10:05:17 +01:00
8ecfb13f3c
zcu104: add copyrights
2020-02-27 09:57:26 +01:00
22b0449509
Merge pull request #47 from antmicro/zcu104
...
Add support for ZCU104 board
2020-02-27 09:51:54 +01:00
608541d5b8
add ZCU104 board
2020-02-26 13:53:21 +01:00
e516ff3452
vcu118/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:51 +01:00
9d2ca50c5f
kcu105/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:35 +01:00
83d2c71099
platforms/vcu118: add missing Internal Vref configuration on DDR4 C1/C2 banks
2020-02-25 18:32:42 +01:00
4a84e9b08a
targets/colorlight_5a_75b: add instruction to build/load and use bitstream with wishbone-tool
2020-02-25 12:47:08 +01:00
f279fe9d33
vc707: cleanup platform/targets, remove Ethernet support (no Ethernet pads defined)
2020-02-25 10:35:18 +01:00
3581df5af6
vc707: cleanup platform/targets, remove Ethernet support (SGMII is not currently supported)
2020-02-25 09:41:53 +01:00
88a1f80db1
vc707/vcu118: use proper copyrights
2020-02-25 09:03:52 +01:00
373e74f435
add new board files for VC707 and VCU118, only specified limited ports for VCU118, including clock, reset and DDR4
2020-02-24 14:20:47 -05:00
2cf4e084ec
platforms/colorlight_5a_75b.py: fix sdram_clock and sdram a pins
2020-02-23 10:01:41 +01:00
f72e7bd314
Merge pull request #41 from lromor/fix-wrong-import
...
Changed wrong imports for fomu board.
2020-02-12 18:48:13 +07:00
ec30cc05c3
Changed wrong imports for fomu board.
2020-02-12 12:40:07 +01:00
c94360c2e0
targets: avoid direct use of mem_decoder.
2020-02-11 21:59:42 +01:00
4edf196911
targets/EthernetSoC: be sure memory region is added before adding Wishbone Slave (required by new SoC)
2020-02-11 17:45:35 +01:00
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00
7a24406b2e
targets: fomu: fix compatibility for when a cpu is added
...
Things weren't quite right for adding a CPU. This fixes that by
correcting the placer arguments, memory map, and USB type.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-02-03 08:58:54 +08:00
0627f55dca
de10nano: cleanup a bit, rename SDRAMSoC to MiSTerSDRAMSoC and argument to --with-mister-sdram to make it clear that it's using the MiSTer SDRAM extension board.
2020-01-31 09:29:02 +01:00
cf9a9ff91b
de10nano: update copyrights, remove trailing whitespaces
2020-01-31 09:13:36 +01:00
36e1f1fe75
rename sw to user_sw
2020-01-30 05:01:46 -08:00
1631b071c3
finish up sdram, passes memtest
2020-01-30 03:41:44 -08:00
5091a1b40a
WIP sdram module option
2020-01-29 13:59:57 -08:00
3a6a9258ce
add de10 nano board
...
add iostandard to hdmi
2020-01-29 00:21:51 -08:00
2ec6bc0bdc
colorlight_5a_75b: add disclaimer
2020-01-23 14:13:13 +01:00
55c0b781e4
colorlight_5a_75b: revert rx_delay to 2ns, improve comment (thanks @tnt)
2020-01-23 13:16:36 +01:00
4fb89fc9c5
colorlight_5a_75b: set RGMII tx/rx_delay to 0ns in the FPGA (added by PCB/PHY)
2020-01-23 09:39:48 +01:00
dcc65b347d
targets/colorlight_5a_75b: switch to SoCCore, CPU and Etherbone working :)
...
Tested with:
./colorlight_5a_75b.py --cpu-type=picorv32 --uart-name=crossover --with-etherbone --csr-csv=csr.csv
Load with following script:
#!/usr/bin/env python3
# Load ---------------------------------------------------------------------------------------------
def load():
import os
f = open("openocd.cfg", "w")
f.write(
"""
interface ftdi
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0098 0x008b
reset_config none
adapter_khz 25000
jtag newtap ecp5 tap -irlen 8 -expected-id 0x41111043
""")
f.close()
os.system("openocd -f openocd.cfg -c \"transport select jtag; init; svf soc_etherbonesoc_colorlight_5a_75b/gateware/top.svf; exit\"")
exit()
if __name__ == "__main__":
load()
Then start lxserver:
lxserver --udp
And run following script:
#!/usr/bin/env python3
import sys
from litex import RemoteClient
wb = RemoteClient()
wb.open()
# # #
while True:
if wb.regs.uart_xover_rxempty.read() == 0:
print(chr(wb.regs.uart_xover_rxtx.read()), end="")
sys.stdout.flush()
# # #
wb.close()
2020-01-22 15:57:52 +01:00
c07e4a6b3a
colorlight_5a_75b: fix rst_n
2020-01-22 14:57:48 +01:00
8da8ed7a0e
colorlight_5a_75b/v7.0: update eth_clocks/rx pinout, remove FIXME
2020-01-22 14:56:17 +01:00
bb805999cb
platforms/colorlight_5a_75b: fix 6.1 used_led_n/user_btn_n thanks @smunaut
2020-01-22 12:43:37 +01:00
43badd162e
colorlight_5a_75b/v6.1: add led/btn and remove FIXME on sdram now that clarified
2020-01-22 11:05:08 +01:00
1d9e349093
partner: add colorlight_5a_75b initial support
2020-01-22 09:51:00 +01:00
07067301d5
targets/linsn_rv901t: cleanup arguments
2020-01-22 09:04:28 +01:00
8113b491db
aller/nereid/tagus: update litepcie
2020-01-21 21:26:23 +01:00
684c1640bb
add Linsn RV901T support
2020-01-18 21:40:04 +01:00
0e4569a48a
platforms/camlink_4k: remove #!/usr/bin/env python3
2020-01-18 21:35:18 +01:00
e72cd1468c
platforms/ac701: fix eth indent
2020-01-18 21:34:50 +01:00
908539d49f
targets/nexys4ddr: fix typo
2020-01-17 13:15:22 +01:00
bb99a8dd0c
targets/kcu105: remove main_ram_size_limit
2020-01-17 12:09:53 +01:00
eca9bf10ae
mimas_v7: cleanup, make it similar to others boards
2020-01-16 11:24:09 +01:00
54f39b600a
mimas_a7: fix copyrights
2020-01-16 11:02:11 +01:00
8d298951a8
Merge pull request #37 from feliks-montez/master
...
Add Mimas A7 board support
2020-01-16 11:00:32 +01:00
f9619c4a8f
aller/tagus/nereid: use crossover UART, rename SoC to PCIe SoC and pass soc_sdram_argdict to PCIeSoC
2020-01-16 10:51:35 +01:00
fd1e655700
targets: cleanup EthernetSoC
2020-01-16 10:28:09 +01:00
206ec34551
platforms/mimas_a7: add support
2020-01-14 23:31:03 -05:00
9f1c3305b6
targets/mimas_a7: add support
2020-01-14 23:30:49 -05:00
50d550c911
kx2: cleanup, fix copyright
2020-01-13 17:22:33 +01:00
3811b58f32
Merge pull request #36 from Marrkson/master
...
ADD: KX2 and DDR3 support
2020-01-13 17:07:16 +01:00
c109b36fb9
travis: update/fix
2020-01-13 17:00:01 +01:00
028d4a78aa
targets: use default integrated rom/ram size passed with **kwargs from default soc_core_args
2020-01-13 15:20:37 +01:00
13e5ca03a5
ADD: KX2 and DDR3 support
2020-01-13 14:21:54 +01:00
beccf670e5
hadbadge: fix _CRG
2020-01-11 10:46:23 +01:00
15f3457aea
platforms/de0nano/serial: add gpio names in comment
2020-01-10 18:53:52 +01:00
94ba343daf
targets/ac701: cpu_reset is active high
2020-01-10 18:53:14 +01:00
ab01f70e5c
platforms/ac701: set internal vref to 0.750v on DDR3 banks, use IN_TERM=UNTUNED_SPLIT_50 on dq
2020-01-09 21:56:01 +01:00
7afe3dc674
platforms/targets: sync with litex
2020-01-09 21:10:59 +01:00
4192b20f09
targets: cleanup Altera CRGs
2020-01-09 19:46:39 +01:00
9e9fc5ef78
platforms: always use 1e9/clk_freq for default_clk_period
2020-01-09 19:28:50 +01:00
fe23881348
Merge pull request #33 from msloniewski/master
...
targets/de10lite: use external clock for sys directly
2020-01-09 19:23:55 +01:00
aaf8d54c6a
targets/de10lite: use AsyncResetSynchronizer for clock domains
...
At the start output of the pll is not stabilized, which
caused malfunctions when used for sys clock domain.
Use AsyncResetSynchronizer to start clock domains
on pll locked signal.
2020-01-09 18:47:13 +01:00
d08dfdb808
platforms/nexys4ddr: add sdcard pins (sync w. litex commit #e99740e8)
2020-01-09 09:25:19 -05:00
babbc676eb
targets: cleanup ECP5 CRGs
2020-01-09 14:24:18 +01:00
82601ff700
hadbadge: remove speed_grade workaround, now passed to trellis from device.
2020-01-08 19:44:35 +01:00
1f300bb03e
add initial camlink_4k support
2020-01-08 09:56:37 +01:00
c0e4578bea
targets/hadbadge: cleanup/simplify (keep things similar to ulx3s) and add copyrights
2020-01-07 10:29:58 +01:00
85c4f76eba
platform/hadbadge: cleanup/simplify and add copyrights
2020-01-07 10:29:01 +01:00
829898d652
Merge pull request #31 from pdp7/master
...
add the Hackaday Supercon ECP5 badge
2020-01-07 09:48:15 +01:00
ab41cf5b79
Update ecp5_evn.py
2020-01-07 01:55:59 +01:00
b3f175c064
add the Hackaday Supercon ECP5 badge
...
Add the Hackaday Supercon 2019 badge which has an ECP5 FPGA:
https://hackaday.io/project/167255-2019-hackaday-superconference-badge
These changes are from Michael Welling's fork:
https://github.com/mwelling/linux-on-litex-vexriscv
During Supercon, we trying two approaches:
- use the built-in 16MB QSPI SRAM
- use add-on cartiridge with 32MB SDRAM by Jacob Creedon
We were not able to get the QSPI SRAM working so I've removed
those changes, and I have just added the changes that are needed
to boot Linux with the 32MB SDRAM.
Thanks to Jacob Creedon, Greg Davill and Tim Ansell who helped debug.
KiCad design files for the SDRAM cartridge are available at:
https://github.com/jcreedon/dram-cart/
The SDRAM cartridge PCB is shared at:
https://oshpark.com/shared_projects/IQSl2lid
More information in this blog post:
https://blog.oshpark.com/2019/12/20/
The Hackaday Supercon badge PCB design is here:
https://github.com/Spritetm/hadbadge2019_pcb
2020-01-06 16:59:15 +01:00
f8f2301a3e
Merge pull request #30 from mithro/fomu-update
...
Updating the templates for Fomu.
2020-01-03 08:40:18 +00:00
250706b98c
Updating the templates for Fomu.
2020-01-02 13:55:09 +00:00
2b43a18a3c
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:18:56 +01:00
c96e7c8fb9
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:07:18 +01:00
2259042383
pipistrello: add copyrights
2019-12-31 17:44:24 +01:00
6324433e1c
Merge pull request #28 from zakgi/master
...
Adding initial support for Saanlima's Pipistrello LX45 board
2019-12-31 17:33:25 +01:00
980b0ebda0
targets/de10lite: rename VideoSoC to VGASoC (to avoid confusion with VideoSoC as used on Video designs with framebuffer)
2019-12-31 17:30:23 +01:00
10e5248bda
targets/de10lite: minor cleanup on import/_CRG
2019-12-31 17:26:09 +01:00
9c5a4f757f
targets/de10lite: add VideoSoC with VGA peripheral
...
Add VideoSoC build option, based on Frank Buss example.
2019-12-30 23:25:43 +01:00
cace17e162
targets/de10lite: refactor setting up clock domains
...
Use PLL to generate clock for both sys clock domain and clock domain
for sdram. Additionally set up clock domain for VGA periph.
2019-12-30 23:25:43 +01:00
9ed68d129f
platforms/de10lite: add additional configuration
...
Use single image with memory initialization
to make more space for SoC ROM sector.
2019-12-30 23:23:44 +01:00
28753a2c04
platforms/de10lite: remove UART pins from GPIO resource
...
V10 and W10 pins were used in UART periph, causing error
when gpio_0 were requested.
2019-12-30 23:06:58 +01:00
359918c2a2
Comment out template overrides for now.
2019-12-30 19:23:05 +01:00
1f32dcf662
partner: rename orange_crab to orangecrab
2019-12-30 12:07:34 +01:00
8965b01347
partner/orange_crab: cleanup, make it similar to others targets and only keep BaseSoC
2019-12-30 11:54:53 +01:00
e77afaaef0
partner: add OrangeCrab support ( https://github.com/gregdavill/OrangeCrab )
2019-12-30 11:54:45 +01:00
39e428581f
Adding initial support for Saanlima's Pipistrello LX45 board
2019-12-29 18:29:11 -08:00
48476be9e2
aller/nereid/tagus: LitePCIeWishboneBridge's shadow_base replace with base_address
2019-12-14 22:10:04 +01:00
7184032555
aller/neired/tagus: fix gateware/software build directory
2019-12-14 11:29:15 +01:00
4334ba9527
partner/aller, nereid, tagus: Remove deprecated param
...
get_csr_header parameter with_shadow_base
removed/deprecated in litex 2a8d8c8f. New default
behavior matches the desired behavior in these targets.
2019-12-14 01:04:28 +00:00
3012cf75fe
partner/aller, nereid, tagus: Use updated csr APIs
...
litex commit 8be5824e258b84df240d34636aaa539124b92c65 simplified the handling
of csr regions and constants.
2019-12-14 01:00:52 +00:00
d91458c3e6
targets/versa_ecp5: fix compilation with diamond
2019-12-06 16:16:19 +01:00
30ea463b41
targets: keep attributes are no longer needed since automatically added when applying constraints to signals.
2019-12-06 16:01:59 +01:00
8fa3f09226
partner/c10prefkit: apply ethernet constraints on nets as done on Xilinx devices.
2019-12-06 15:22:40 +01:00
0a56d86b1a
partner/c10lprefkit: remove FAMILY platform_command (not needed)
2019-12-06 15:21:48 +01:00
5193f7155a
partner/aller,nereid & tagus: fix compilation
2019-12-03 09:37:18 +01:00
f7fbfb4639
partner/community/targets: uniformize, improve presentation
2019-12-03 09:33:08 +01:00
1b1370d086
official/targets: uniformize, improve presentation
2019-12-03 09:07:09 +01:00
4e13b7fdab
targets: fomu: move SoCCore import definition
...
The SoCCore definition used to be available under litex.soc.integration,
however it was removed in
626533ce9d
2019-11-25 12:46:21 +08:00
0da263fa75
platforms: fomu: add spiflash4x definition
...
Fomu Hacker supports dual spi, so add a "spiflash4x" definition.
The litex spi_flash module will run this flash in dual mode, because the
`dq` array is only two signals wide.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 21:56:57 +08:00
45b847b466
fomu: add documentation to crg
...
This documentation can be fetched using a package such as lxsocdoc.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-23 12:55:26 +08:00
2c82e02df9
fomu: pvt: swap miso and mosi
...
These pins were swapped in the definition, which made them not work so
well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-22 18:57:26 +08:00
4231d59901
platforms/target: only catch ModuleNotFoundError exceptions to improve error reporting (thanks mwelling)
2019-11-16 09:40:30 +01:00
2a0fbcadd2
ac701: add pcie_x1 pins
2019-11-06 09:29:55 +01:00
5bd8c4d74f
targets/trellisboard: use ECLKBRIDGECS to allow ECLK to reach all DDR banks (fixes Diamond build)
2019-11-01 10:52:56 +01:00
1ae26dd499
targets: use type="io" instead of io_region=True
2019-10-30 16:35:32 +01:00
8878c0a84a
versa_ecp5, trellisboard: add trellis toolchain specific arguments
...
Sync up with Litex commit #49372852d.
2019-10-29 12:32:41 -04:00
5f80633154
targets: increase integrated ROM size if EthernetSoC used
...
Sync up with litex commit #201218b2c.
2019-10-29 12:32:41 -04:00
c83e10d9f3
official/platforms/versa_ecp5: add serdes refclk/sma
...
Sync up with litex commit #ae9c25b74.
2019-10-29 12:32:41 -04:00
91083f99a8
ulx3s: simplify SDRAM module selection
2019-10-13 21:15:22 +02:00
6f3b194bd3
Merge pull request #20 from lolsborn/ulx3s-target
...
memory device selection for ulx3s
2019-10-13 20:59:16 +02:00
abf6f7b09a
memory device selection for ulx3s
2019-10-13 09:27:33 -07:00
53d5ed1226
Merge pull request #19 from lolsborn/ulx3s-target
...
add sys clock freq flag, uses same method as current versa code
2019-10-13 10:32:43 +02:00
34507eb431
add sys clock freq flag, uses same method as current versa code
2019-10-13 00:44:07 -07:00
92cfd629df
partners: fomu-evt: add "dbg" connector
...
This connector is for the six "debug" pins on the Raspberry Pi header.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:39:19 +08:00
09a55d20c1
partners: fomu-evt: fix spiflash4x pin mapping
...
The D3 and D4 pins were swapped around, leading to interesting issues.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:38:50 +08:00
785909ac5f
targets: switch from shadow_base to io_regions
2019-10-09 11:09:59 +02:00
19e2a12266
Merge pull request #18 from xobs/fomu-cpu-updates
...
Fomu cpu updates
2019-09-27 16:55:27 +08:00
c20c489d66
fomu-evt: add i2c pins
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-27 11:26:23 +08:00
48cd1208df
targets: sync with litex targets
2019-09-25 14:09:25 +02:00
0ead12bae8
targets/ulx3s: revert to cl=2
2019-09-25 13:58:45 +02:00
c8e8f254ca
targets: fomu: add USBSoC and default to heap placer
...
The heap placer is important enough that we should just make it the
default.
Also, add a `USBSoC` that includes the required interrupt table, as this
must be specified prior to calling `__init__()`.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:08:05 +08:00
218bd353c1
targets: fomu: use memory array for sram address
...
Use the memory array to find the address for the sram bank.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:07:26 +08:00
348677598d
targets: fomu: support building with a cpu
...
Allow the user to specify a CPU.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:06:23 +08:00
e94c6c8f27
partner/netv2: switch to MVP (K4B2G1646F instead of MT41J128M16)
2019-09-12 09:52:13 +02:00
91feb59f49
Merge branch 'master' of http://github.com/litex-hub/litex-boards
2019-09-11 23:02:44 +02:00
a92ce32f91
targets/netv2: add clk100 (for framebuffer)
2019-09-11 23:02:21 +02:00
ec97d01feb
platforms/netv2: add spiflashx4, hdmi in/out
2019-09-11 23:01:58 +02:00
91a1520655
add initial Trenz Cyclone 10 LP RefKit support with SDRAM/HyperRAM/Ethernet
2019-09-10 11:32:29 +02:00
c6bb34d78a
partner/targets/nereid: MT8KTF51264 now in LiteDRAM
2019-09-09 08:50:06 +02:00
b4eefa6c33
import: allow importing directly from litex_boards.platforms or litex_boards.targets
2019-09-03 15:30:20 +02:00
ec5540454b
partner: aller/nereid/tagus fix copyright (Rohit Singh as main author), do some cosmetic
2019-09-02 11:43:30 +02:00
cd527f0fcb
Merge branch 'master' into master
2019-09-02 11:29:22 +02:00
d78965ffb2
partner/targets/fomu fix copyright & mode
2019-09-02 11:23:43 +02:00
bdbd2ec1c0
partner: add fomu target
...
This adds the Fomu target back in. The default BaseSoC supports
various USB methods, and will be updated as more become available.
The debug bridge may optionally be added.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-02 14:18:09 +08:00
e704014b36
targets/__init__: comment targets import until we found a way to avoid litedram/liteeth dependecies for targets no using them.
2019-09-01 11:43:21 +02:00
346621b9fc
partner: add platforms and targets for aller, tagus and nereid boards
2019-09-01 03:02:04 -05:00
1131af05af
nexys_video: generate clk100
2019-08-27 14:05:07 +02:00
f661ee0ec9
targets: fix import
2019-08-26 11:00:12 +02:00
ac58d57a83
targets: import platforms from litex_boards.platforms
2019-08-26 09:09:40 +02:00
b84308cb58
list all platforms/targets in platforms.py, targets.py to ease import
2019-08-26 09:07:07 +02:00
618f41bb1e
Update ecp5_evn.py
...
The system clock was driven directly while it should be driven by the PLL.
2019-08-22 02:27:50 +02:00
1abca7dcff
Turn litex_boards.community into module
2019-08-12 00:17:26 +02:00
ad21f15782
Merge pull request #10 from DurandA/ecp5-evn
...
Add ECP5 Evaluation Board
2019-08-09 12:37:36 +02:00
Florent Kermarrec
Vamsi K Vytla
Tommy Thorn
David Shah
Ilya Epifanov
Dave Marples
Staf Verhaegen
David Sawatzke
Piotr Binkowski
Greg Davill
Gabriel Somlo
rob-ng15
Jędrzej Boczar
Piotr Esden-Tempski
Sean Cross
Tom Keddie
Fei Gao
Gwenhael Goavec-Merou
Leonardo Romor
Paul Sajna
Feliks
Mark
Marcin Sloniewski
Arnaud Durand
Drew Fustini
Tim Ansell
Giammarco Zacheo
Derek Kozel
Steven Osborn
Antti Lukats
Rohit Singh