9a82933858
cpu/rocket: expose 64-bit buses (use automatic down-conversion of SoCCore)
2019-10-11 09:01:50 +02:00
ca81cc209b
soc_core: add automatic down-conversion of CPU buses to 32-bit (if needed)
2019-10-11 09:01:08 +02:00
03faf06c82
soc/interconnect/axi: re-align to improve readability
2019-10-11 08:41:05 +02:00
7dea9afd7d
software/bios: simplify banners
2019-10-11 08:38:12 +02:00
6bd1889330
cpu/picorv32: remove obsolete comment
2019-10-10 22:29:54 +02:00
28517d20ca
cpu/picorv32: use a single idbus
2019-10-10 22:02:04 +02:00
5daf1a2296
cpu: cleanup/re-align
2019-10-10 21:52:09 +02:00
467d35edee
cpu/rocket: rename ibus/dbus to mem_wb/mmio_wb and add size suffix
2019-10-10 21:40:29 +02:00
1045cda39e
cpu: add buses list and use it in soc_core to add bus masters
2019-10-10 21:35:06 +02:00
42ccc91f74
integration: move soc constants to soc.h of csr.h
...
software retro-compat with soc.h included in csr.h
2019-10-10 21:15:49 +02:00
ed3c53d7cd
build/generic_platform: only add sources if language is not None
2019-10-10 19:39:33 +02:00
f3ba078882
xilinx/vivado: replace "xy" == language with language == "xy"
2019-10-10 19:36:17 +02:00
17756f631b
Merge pull request #277 from railnova/feature/vivado_sysverilog_support
...
[feature] Add SystemVerilog support for the Vivado builder
2019-10-10 19:31:09 +02:00
b25194826e
integration/soc_zynq: shadow_base no longer recommended (replace with io_regions)
2019-10-10 19:23:01 +02:00
496ba7e594
bios/main: use same banner than README (MiSoC cited in README/LICENSE)
2019-10-10 19:21:32 +02:00
840f01b6d5
software/bios: don't show peripherals init banner if nothing to init, add Ethernet init printf
2019-10-10 19:18:28 +02:00
f2369a4c9e
Add system Verilog support for the Vivado builder
2019-10-10 14:10:28 +02:00
f8f643a02f
cpu/rocket: swap main_mem and io regions
...
The total size of RAM (main_mem) can be expected to vary significantly,
and often exceed the size needed for MMIO allocations by a large margin.
As such, place Rocket's MMIO (io regions) below 0x8000_0000, and start
the RAM (main_mem) at 0x8000_0000, with nothing above it to limit its
future growth.
Also, bump the pre-built Rocket verilog submodule to an updated version,
which also comes with matching changes to the way MMIO and RAM accesses
are mapped and routed to their respective AXI interfaces.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-10-09 14:25:41 -04:00
b627a8fe71
cpu: add default io_regions to CPUNone (all address range can be used as IO)
2019-10-09 12:06:21 +02:00
a6b3aa3c62
soc_core: improve check_io_region error message
2019-10-09 10:47:19 +02:00
dc656d48c2
targets/sim: switch from shadow_base to io_regions
2019-10-09 10:38:22 +02:00
10146abf0a
cpu/rocket: move csr to IO region
2019-10-09 10:24:01 +02:00
7f1d4623ff
build/xilinx/vivado: fix default synth-mode
2019-10-09 10:19:18 +02:00
a4ef9b29b9
soc_core/cpu: add io_regions and deprecate shadow_base (with API retro-compat)
...
The shadow_base parameter has always been difficult to apprehend, replace it with
io_regions (uncached regions) defined user or the CPU.
The equivalent of a shadow_base parameter of 0x80000000 in the old API is:
io_regions = {0x80000000: 0x80000000} # origin, length
It's still possible to use shadow_base with retro-compat, but user is encouraged
to update and features will be removed in the future.
2019-10-09 10:15:42 +02:00
53777391e8
builder: use the SoC's existing shadow base with get_csr_header()
...
Both the SoC and get_csr_header() have independently set defaults
for the value of 'shadow_base'. If the SoC's value was modified,
ensure that get_csr_header() uses the modified value instead of
its own default.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
2019-10-08 14:28:50 -04:00
92975b139e
targets/arty: allow setting synth-mode to yosys with command line: --synth-mode=yosys
2019-10-07 10:38:26 +02:00
4a1cefe946
build/xilinx/vivado: add vivado_build_args/vivado_build_argdict for yosys synthesis mode
2019-10-07 10:37:16 +02:00
3e22d4b9e6
xilinx/common: be sure language is not vhdl when yosys synthesis is used
2019-10-07 10:36:32 +02:00
975bd9be8b
cpu/vexriscv: use specific mem_map for linux variant
2019-10-07 08:50:03 +02:00
2dfe7441d6
Merge pull request #271 from gsomlo/gls-yosys-nowidelut
...
RFC: optional '-nowidelut' flag for yosys synth_ecp5
2019-10-06 14:55:44 +02:00
6aa76b1df8
trellis, versa_ecp5: optional '-nowidelut' flag for yosys synth_ecp5
...
Passing '-nowidelut' to yosys' synth_ecp5 command improves area utilization
to the point where a (linux variant) rocket-chip based design will fit on a
versa_ecp5 board. Usually '-nowidelut' incurs a timing penalty, but that is
then mitigated by using DSP inference (enabled by default from yosys commit
8474c5b3).
Off by default, this flag can be enabled by adding '--yosys-nowidelut=True'
to the litex/boards/targets/versa_ecp5.py command line.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-10-06 08:37:43 -04:00
2f7bd97129
fix comments
2019-10-06 10:47:28 +02:00
960b25a541
Merge pull request #270 from gsomlo/gls-csr-upper
...
soc/integration: ensure CSR constants are in uppercase
2019-10-01 21:40:56 +02:00
41ad08e8ef
soc/cores/icap: simplify ICAPBitstream (untested)
2019-10-01 21:30:14 +02:00
0c2993866c
soc/cores/icap: rename ICAP to ICAPBistream and revert old ICAP
2019-10-01 21:04:49 +02:00
4bb2827e05
Merge pull request #269 from antmicro/rework_icap
...
soc: cores: support sending custom bitstream to ICAP
2019-10-01 20:55:28 +02:00
c8790d342a
soc/integration: ensure CSR constants are in uppercase
...
Fixup over commit 8be5824e
2019-10-01 12:15:25 -04:00
4423a46ba2
soc: cores: support sending custom bitstream to ICAP
...
This adds FIFO that can be used to send any
sequence of commands to the ICAP controller.
2019-10-01 13:44:45 +02:00
427d7af767
soc/interconnect: rename stream_packet to packet & cleanup (with retro-compat)
2019-09-30 23:41:07 +02:00
59bf04d965
soc/interconnect/stream: add separators, mode Actor modules just after Endpoint
2019-09-30 23:33:25 +02:00
59995c5359
soc_zynq: update get_csr_header
2019-09-30 16:00:11 +02:00
4d90058b18
soc/integration: move cpu_interface retro-compatibility to litex/__init__
2019-09-30 11:32:07 +02:00
8be5824e25
soc/integration: use dicts for constants/mem_regions/csr_regions to cleanup/simplify iterations on theses
2019-09-30 10:59:36 +02:00
7b72148c4e
cpu: remove initial SERV support (we'll work in a branch to experiment with it)
2019-09-30 08:35:18 +02:00
63a813af9c
soc_core: fix cpu_type=None case and add test for it
2019-09-30 08:26:38 +02:00
3d257d7266
soc_sdram: remove axi usecase, this was only useful to do some preliminary axi tests.
...
Proper AXI support will be added in the future for SoCs.
2019-09-29 17:33:16 +02:00
e8e57b4f87
soc_core: cleanup/re-align
2019-09-29 17:31:37 +02:00
334ae336bf
soc/integration: rename cpu_interface to export (with retro-compat), re-arrange a bit, add separators
2019-09-29 17:23:26 +02:00
48e5a1d140
soc/cores: uniformize (continue)
2019-09-29 17:04:21 +02:00
e9ed4761b5
soc/cores/gpio: uniformize with others cores
2019-09-29 16:10:44 +02:00
78cecbe36b
soc/cores: rename frequency_meter to freqmeter and uniformize with others cores
2019-09-29 16:08:39 +02:00
7575ecc6ad
soc/cores/ecc: improve readibility, uniformize with others cores
2019-09-29 16:02:04 +02:00
c6fe3f3145
soc/cores/clocks: improve readibility
2019-09-29 15:58:22 +02:00
6fcb12a98f
soc_core: use cpu.data_width to compute csr_alignment (and remove Rocket workaround)
2019-09-29 15:47:10 +02:00
b826c1705f
soc/cores/cpus: improve ident/align, uniformize between cpus
2019-09-29 15:41:36 +02:00
355072c285
soc/cores/cpu: add CPU class and make all CPU inheritate from it
...
Also rename reserved_interrupts to interrupts (empty dict is no reserved interrupts)
2019-09-29 15:27:41 +02:00
2c3ad3f96d
soc_sdram: move ControllerInjector to LiteDRAM (LiteDRAMCore)
2019-09-29 14:44:44 +02:00
101f1b1cef
soc/integration: add common.py and move helpers from soc_core to it
2019-09-29 14:22:26 +02:00
68ba1c60be
soc_core: avoid manual listing of support CPUs, just use CPU.keys()
2019-09-28 22:19:23 +02:00
9095b80e89
soc_core: remove add_cpu_or_bridge retro-compatibility (most of the designs have been updated since the change)
2019-09-28 19:01:41 +02:00
8dd2dc1ce8
integration/soc_core: remove csr_map_update (no longer used)
2019-09-28 18:59:30 +02:00
da91aa43f7
soc_core/cpu: move memory map override to CPUs, select reset_address after eventual memory map has override been done
2019-09-28 14:15:48 +02:00
8099b0beb6
soc/cores/cpu: add set_reset_address method and use it instead of passing reset_address as a parameter
2019-09-28 12:35:41 +02:00
7660dc22e1
soc/cores/cpu: do instance in do_finalize for all cpus (allow updating parameters until the design is generated)
2019-09-28 12:09:55 +02:00
a3816096a7
cores/cpu: define CPUS and simplify instance
2019-09-28 00:55:08 +02:00
9f6a2ae73e
soc_core/serv: use UART_POLLING (no interrupt support)
2019-09-28 00:42:00 +02:00
49594ed7d4
software/libbase/uart: add polling mode
2019-09-28 00:35:26 +02:00
3f95b9c0de
add SERV CPU initial support (not working)
2019-09-28 00:34:55 +02:00
015b65fe88
targets/ulx3s: revert to cl=2
2019-09-25 14:09:44 +02:00
a9d55b04c0
boards/netv2: switch to MVP, add spiflashx4 and hdmi in/out
2019-09-25 14:07:28 +02:00
1425a68d9e
wishbone2csr: refactor using FSM, reduce latency (make it asynchronous) and set csr.adr only when access is done (allow use of CSR/CSRBase we signal)
...
Making it asynchronous does not seem to deteriorate timing or resource usage, if it's the case for some designs, we'll add a register parameter.
2019-09-24 17:55:29 +02:00
ffd2be2ba0
csr: add we signal to CSR, CSRStatus
...
Doing actions on register read is generally not a good design practice (it's
better to do separate register write to trigger actions) but in some very
specific cases being able to know that register has been read can solve cases
that are difficult to do with the recommended practives and that can justify
doing an exception.
This commit add a we signal to CSR, CSRStatus and this allow the logic to know
when the CSR, CSRStatus is read.
2019-09-24 17:51:06 +02:00
47dc332498
build/xilinx/programmer: fix vivado_cmd
2019-09-24 14:40:48 +02:00
ed9bff2eb9
soc/integration/doc: replace "== None" by "is None"
2019-09-24 10:11:31 +02:00
836d5b88c5
Merge pull request #266 from xobs/add-moduledoc-autodoc
...
Add ModuleDoc and AutoDoc
2019-09-24 10:09:22 +02:00
78fb0fb9dc
tools/litex_read_verilog: also delete yosys_v2j.ys
2019-09-24 08:49:00 +02:00
0ea7a1fd05
soc_core/sdram: Don't blow up if _wb_sdram_ifs or _csr_masters are empty
...
For example a standalone controller with no exposed CSRs (probably not
a very useful configuration but I really don't like python backtraces)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-09-24 08:41:59 +02:00
68cea8c32f
timer: inherit ModuleDoc
...
With the new ModuleDoc class, we can inherit `ModuleDoc` and
automatically get module-level documentation.
This patch also corrects a typo in `timer` that causes an error in
sphinx.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-24 14:34:41 +08:00
131971986c
integration: add ModuleDoc and AutoDoc
...
It is important to be able to document modules other than CSRs.
This patch adds ModuleDoc and AutoDoc, both of which can be used
together to document modules.
ModuleDoc can be used to transform the __doc__ string of a class into a
reference-manual section. Alternately, it can be used to add additional
sections to a module.
AutoDoc is used to gather all submodule ModuleDoc objects in order to
traverse the tree of documentation.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-24 14:30:28 +08:00
742da31bc0
Merge pull request #264 from antmicro/mor1kx_linux
...
Enable to run Linux on mork1x
2019-09-23 23:19:45 +02:00
06d0806494
soc_core: set csr to 0x00000000 when there is no wishbone
2019-09-23 15:57:14 +02:00
ad8830d977
soc_sdram: Don't add the L2 Cache when there's no wishbone bus
2019-09-23 15:53:07 +02:00
5844376d53
soc_core: adapt memory map for mainline Linux with mor1kx
...
Mainline Linux expects it to be loaded at the physical address of 0x0.
Change the MAIN_RAM base address to 0x0 and update exception vector
during the booting process.
2019-09-23 15:34:52 +02:00
201218b2c3
boards/targets: increase integrated ROM size if EthernetSoC is used
...
Currently section '.rodata' of the LiteX BIOS doesn't fit in the 'rom'
region if mor1kx is used with EthernetSoC. Increase the integrated ROM
size from 0x8000 to 0x10000 in EthernetSoC.
2019-09-23 15:34:34 +02:00
ae38fd4244
soc_core: revert wishbone2csr to __init__ but add with_wishbone parameter
2019-09-23 12:59:43 +02:00
8c979565a8
soc_sdram: change l2_size checks order
2019-09-23 10:15:27 +02:00
a9acab99b3
soc_core: move CSR bridge to finalize (only generate it if there is a wishbone master), revert default parameter when cpu_type is None (we have systems with cpu_type=None but that are using these peripherals)
2019-09-23 09:58:47 +02:00
dde6dd027b
integration/builder: avoid specific _generate_standalone_includes
2019-09-23 09:26:47 +02:00
735ea196dd
This will allow it to be built for microwatt out of tree
...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-09-23 08:40:54 +02:00
c28086cde8
soc_core: When cpu_type is "None", let's not generate useless UART, timer, ROMs, wishbone to CSR bridge etc...
...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-09-23 08:35:50 +02:00
f909e4d706
integration/builder: When the CPU is "None", we used to not generate any code.
...
With this change, we will now generate csr.h and sdram_phy.h, which
will be needed by the initialization code running on the host CPU.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-09-23 08:31:21 +02:00
1a6dddd57c
spi_flash: document register fields
...
Document the various fields present in the SPI flash bitbang interface.
This adds documentation for the Single and DualQuad modules.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-20 12:42:43 +08:00
9ea11cf5ab
vivado just needs to be in the path for the programmer as well
2019-09-19 20:35:55 -07:00
60d8572c3e
csr_eventmanager: add `name` and `description` args
...
Add `name` and `description` as optional arguments to the various
EventSource types. These default to `None`, so this should be a
backwards-compatible change.
Use the same trick as CSRs, where we default the `name` to be the
instantiated object name as read from the Migen `get_obj_var_name()`
call.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-19 17:23:03 +08:00
e2c78572a2
cores/timer: add general documentation on Timer implementation and behavior.
2019-09-19 09:27:24 +02:00
e97c1e36fb
soc_sdram: improve readibility and convert l2_size to minimal allowed if provided l2_size is lower
2019-09-19 05:36:57 +02:00
99ed0877ac
csr: add description to CSRStorage/CSRStatus attributes (thanks xobs)
2019-09-18 10:47:54 +02:00
f2e84a5800
soc/cores/timer: fix typo (thanks xobs)
2019-09-18 10:45:38 +02:00
28885064f7
soc/cores/timer/doc: rewrite a little bit, avoid some redundancy, change ident.
2019-09-18 10:14:47 +02:00
cb7d941aaa
timer: add documentation
...
Now that CSRs have documentation support, add documentation to the basic
`Timer` module.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-18 15:06:20 +08:00
cca0478a5e
soc/cores/spi: use new CSRField (no functional change)
2019-09-16 17:02:55 +02:00
80b2bef387
soc/cores/bitbang: use new CSRField (no functional change)
2019-09-16 16:56:00 +02:00
9bda614a3e
csr: update copyrights
2019-09-16 08:49:00 +02:00
29134cc659
csr: more documentation
2019-09-16 08:45:29 +02:00
74e756aa30
csr/CSRStorage: remove storage_full (was only needed by alignment_bits)
2019-09-16 08:38:26 +02:00
5dc440e80d
csr: use IntEnum for CSRAccess
2019-09-16 08:36:25 +02:00
d2646f138e
csr/CSRStorage: remove alignment_bits: complexify too much code for the few use-cases it's really useful
2019-09-15 19:47:48 +02:00
8e14694eb5
csr/fields: document, add separators, 100 characters per line
2019-09-15 19:11:25 +02:00
4e84729cf9
csr/fields: add access parameter
2019-09-14 22:16:18 +02:00
23b01f8f02
csr/fields: add pulse mode support
2019-09-14 21:49:34 +02:00
8c080e5fb6
soc/interconnect/csr: add initial field support
2019-09-13 20:01:31 +02:00
c120f6d457
build/openocd: add set_qe parameter to flash
...
QE bit is not set on blank SPI flashes and need to be set when SPI X4 is enabled in the bistream to load the FPGA.
2019-09-12 17:07:56 +02:00
6a0a1c9d87
tools/litex_term/upload: bufferize only chunks of the file instead of the entire file to speedup upload when used on embedded devices (RPI for example)
2019-09-12 10:21:37 +02:00
16b6b357ca
soc/integration/cpu_interface: don't raise OSError if we are not going to compile software and compilation toolchain is not found
2019-09-11 18:30:28 +02:00
62f53d5035
soc/integration/builder: call do_exit with vns when build is done.
2019-09-10 12:41:05 +02:00
cb5f1467cf
Merge branch 'master' of http://github.com/enjoy-digital/litex
2019-09-09 15:12:24 +02:00
004c96b508
soc/itnegration: update litedram
2019-09-09 15:12:08 +02:00
2400f0f43d
fix crc32
2019-09-09 13:19:43 +02:00
19f58dd971
interconnect/wishbone: add FlipFlop to allow UpConverter to be used
...
Note: a test should be added for Converter and DownConverter/UpConverter should be cleaned up
2019-09-09 11:47:36 +02:00
bd6ec63be4
build/openocd: add stream method for JTAG UART
2019-09-06 11:57:18 +02:00
b356204f95
soc_core: add JTAG UART support (uart_name="jtag_uart)
2019-09-06 11:56:42 +02:00
d0ebbda4b3
soc/cores/jtag: add Xilinx JTAG TAPs support and simple JTAG PHY (can be used for JTAG UART)
2019-09-06 11:55:41 +02:00
2638393b53
soc_zynq: fix indent
2019-09-05 15:59:35 +02:00
9051cf97e4
soc_zynq: fix typo
2019-09-05 15:55:18 +02:00
67a09aef05
soc/interconnect/stream: add Monitor module
...
Generic module to monitor endpoints activity: tokens/overflows/underflows that
can be plugged on a endpoint. Can be useful for various purpose:
- endpoint bandwidth calculation.
- underflows/overflows detection.
- etc...
2019-09-05 11:54:14 +02:00
6f150a5626
Merge pull request #254 from mithro/crc-smaller
...
Add @xobs' smaller CRC version
2019-09-03 07:23:32 +02:00
2a41f0d2a4
Use `SMALL_CRC` to enable smaller CRC versions.
...
@xobs created a smaller code size version of the CRC functions. Enable
these if someone uses the `SMALL_CRC` define.
2019-09-02 14:48:30 -07:00
083337441a
Remove extra whitespace.
2019-09-02 14:47:20 -07:00
c0e723868e
libbase: crc16: commit smaller version of crc16
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-02 14:44:18 -07:00
a59d0efca0
libbase: crc32: add smaller version
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-02 14:44:18 -07:00
3ff6a18a45
Only write file if contents will change.
2019-09-02 14:26:41 -07:00
a2938a7ae7
soc/cores: simplify JTAGAtlantic (only keep alt_jtag_atlantic instance), move to jtag and allow selecting it as uart with uart_name"jtag_atlantic"
2019-08-31 18:34:08 +02:00
19d3acfc71
Merge pull request #251 from micro-FPGA/master
...
atlantic JTAG UART working module
2019-08-31 18:33:27 +02:00
fb00ee85a2
Create atlantic.py
...
atlantic JTAG uart for Intel FPGA's, working and tested on Intel C10LP EK
2019-08-30 09:35:10 +02:00
41fe7cae0b
core/spi: add minimal SPISlave
2019-08-29 09:46:20 +02:00
b845755995
gen/fhdl/verilog: allow single element verilog inline attribute
2019-08-28 05:24:11 +02:00
5a7b4c3406
targets/nexys_video: generate clk100
2019-08-27 14:06:13 +02:00
c179741cf3
software/bios: switch to standard CRLF
...
Avoid setting terminal to "implicit CR in every LF" mode.
2019-08-27 09:45:44 +02:00
0328ba7d6c
tools/litex_term: add automatic check to see if we need to insert LF or not
2019-08-26 18:17:43 +02:00
ffebd2076c
bios/tools: allow disabling CRC check on serialboot (to speedup debug/loading large images when only serial is available)
2019-08-26 17:15:01 +02:00
4842bdcf08
tools/litex_term: add sdl_payload_length
2019-08-26 12:10:11 +02:00
6d844a038a
software: use native toolchain for same host, target architectures
...
LiteX rightfully assumes that most often the target software must
be cross-compiled from an x86 host platform. However, LiteX can be
also built on a 'linux-riscv64' platform (e.g. Fedora's riscv64
port), where the software for riscv64 targets should be compiled
using the native toolchain.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-08-23 09:04:55 -04:00
92e5b4b2cd
Merge pull request #2 from enjoy-digital/master
...
update with hyperram and other changes
2019-08-16 14:36:59 +02:00
4990bf33c0
soc/core: simplify/cleanup HyperRAM core
...
- rename core to hyperbus.
- change layout (cs_n with variable length instead of cs0_n, cs1_n).
- use DifferentialOutput when differential clock is used.
- add test (python3 -m unittest test.test_hyperbus).
Usage example:
from litex.soc.cores.hyperbus import HyperRAM
self.submodules.hyperram = HyperRAM(platform.request("hyperram"))
self.add_wb_slave(mem_decoder(self.mem_map["hyperram"]), self.hyperram.bus)
self.add_memory_region("hyperram", self.mem_map["hyperram"], 8*1024*1024)
2019-08-16 14:04:58 +02:00
f47e4978f2
libero enable enhanced constraints
...
Libero 12.0 does not support any more classic constraint flow
2019-08-16 10:31:53 +02:00
d1502d4195
soc/cores: add initial simple hyperram core
2019-08-16 09:48:17 +02:00
6e6fe83af3
build/altera/quartus: add add_ip method to use Quartus QSYS files
...
platform.add_ip("my_ip.qsys")
2019-08-15 13:45:29 +02:00
2899928aba
cpu_interface: add json csr map export, simplify csv csr map export using json
2019-08-15 09:27:33 +02:00
9d4b7cd515
bios/sdram: set init done after memtest (for standalone LiteDRAM controllers)
2019-08-14 19:09:58 +02:00
0cd4e45f48
build/xilinx/vivado: use "" for strings
2019-08-14 19:03:10 +02:00
8d161a47cf
build/xilinx/vivado: remove with_phys_opt
2019-08-14 19:02:01 +02:00
f6638ded13
Merge pull request #243 from sergachev/master
...
build/xilinx/vivado: improve directive support
2019-08-14 18:58:15 +02:00
861eea8a07
build/xilinx/vivado: improve directive support
2019-08-14 17:49:13 +02:00
db4c609a33
[fix] prevent Vivado from inferring DSP48 in AXIBurst2Beat
2019-08-14 11:30:39 +02:00
6d5fddc160
cores/spi_flash/S7SPIFlash: make cs_n optional in pads (when driven externally)
2019-08-14 07:35:45 +02:00
a5eaf172c5
more understandable error when missing a memory
2019-08-13 10:14:16 +02:00
6c298cb708
build/lattice/trellis: use abc9 techmapping pass with yosys
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-08-09 09:12:22 -04:00
31bfb54667
software/libbase/mdio: set data before clock, revert two cycle turnaround and test with different phys
2019-08-09 13:26:31 +02:00
e670cb9176
cores/cpu: add riscv-none-embed toolchain support to riscv32 cpus
2019-08-09 12:33:10 +02:00
6d94c07d70
software/libase/mdio: cleanup and reduce raw_turnaround by 1 cycle
2019-08-09 10:33:42 +02:00
0c287b11ba
cores/clock/S7PLL: fix -1/-3 speedgrade vco max freq swap
2019-08-09 09:27:32 +02:00
82cd557c24
software/bios: add Ethernet PHY MDIO read/write/dump commands
2019-08-09 09:26:41 +02:00
0ba9ab92b4
altera/common: fix AsyncResetSynchronizer polarity and simplify
2019-08-08 16:19:22 +02:00
124dff8f3f
build/xilinx/common: improve presentation
2019-08-08 16:08:55 +02:00
60873a5b73
microsemi/common: improve presentation
2019-08-08 16:06:40 +02:00
36d9d78c5e
build/altera/common: improve presentation
2019-08-08 16:02:34 +02:00
95953d2928
platforms/default_clk_period: use 1e9/freq
2019-08-07 08:36:04 +02:00
f1d8c70bd8
targets/minispartan6/crg: only keep S6PLL code
2019-08-07 08:29:59 +02:00
d3d0a6231c
cores/clock: juse use 1e9/freq instead of period_ns
2019-08-07 08:29:20 +02:00
a881817fb3
cores/clock/s6pll: add phase support
2019-08-07 08:18:54 +02:00
6b7ca0cff7
cores/clock/xilinx: change clkfbout_mult loop order to select highest vco_freq
2019-08-07 08:17:44 +02:00
1884649de1
litex_term: make sure to unconfigure console when board is unplugged
2019-08-06 08:46:25 +02:00
e052d7f645
soc/integration/builder: -x
2019-08-06 07:56:45 +02:00
236070fdcf
cores: -x on spi.py
2019-08-05 10:36:43 +02:00
a9fe2788a2
wishbone/SRAM: make read_only emited verilog code compatible with all tools
...
Quartus was not able to implement ROM correctly, see #228
2019-08-05 09:08:56 +02:00
ce5c58592b
soc/cores/uart: add FT245 FIFO mode support (sync & async)
2019-08-04 12:22:35 +02:00
a496760cb6
build/altera/quartus: use .bat on win32/cygwin
2019-08-02 10:27:38 +02:00
7e0ea07076
build/xilinx/vivado: change severity of Common 17-55 critical warning to warning
2019-08-01 21:03:05 +02:00
92d93ad221
cores/pwm: remove default CSR reset values.
2019-07-29 08:38:28 +02:00
25ca0a8b71
soc: generate git header and show migen/litex git sha1 in bios
2019-07-27 20:27:53 +02:00
fdb119cb7b
support vivado incremental implementation
2019-07-25 19:18:11 +02:00
932475a29b
cpu/vexriscv: bump submodule
2019-07-25 08:43:35 +02:00
bc7ab637dd
bios/sdram: fix compilation warning
2019-07-25 07:46:14 +02:00
1cfb36e1e4
soc_core: round memory regions size/length to next power of 2 (if not already a power of 2)
2019-07-23 20:35:28 +02:00
3e89c56468
cpu/vexriscv: bump submodule
2019-07-23 11:49:18 +02:00
e673fce445
bios/boot: fix default EMULATOR_RAM_BASE
2019-07-23 10:28:19 +02:00
0acacbaa82
cores/clock: cleanup
2019-07-23 09:54:30 +02:00
edf8aa8cfd
cores/clock: add initial iCE40 support
2019-07-23 09:27:20 +02:00
6d54335839
cores/spi_flash/add_clk_primitive: return if clk primitive is not needed
2019-07-22 21:55:07 +02:00
462d12bacc
bios/boot: define EMULATOR_RAM_BASE if not defined, add KERNEL_IMAGE_RAM_OFFSET
2019-07-22 21:54:24 +02:00
fc12961e7e
soc_core: fix cpu_variant definition
2019-07-22 12:46:39 +02:00
af61688d1d
bios/boot: fix booting rework
...
- keep emulator.bin in a specific ram (for now)
- print message when falling back to boot.bin
- print destination on tftp download (to ease debug)
2019-07-22 11:47:41 +02:00
4b686dbdb2
soc_core: fix cpu_variant config (we don't want the extension)
2019-07-22 11:44:32 +02:00
7d9cf1d2bd
Merge pull request #216 from antmicro/booting_vexriscv_linux
...
Rework booting Linux on VexRiscv
2019-07-22 11:44:20 +02:00
95cfd0b9e5
cores/spi_flash: add SpiFlashCommon and use it to add clk primitives (7-Series/ECP5 support for now)
2019-07-22 10:28:03 +02:00
bfdcf4b2a0
platforms/versa_ecp5: add spiflash pads
2019-07-22 10:25:55 +02:00
41eb21b343
soc_core: optimize mem_decoder
...
Non-optimized version was tested on 7-series and was additional resource usage
was not noticeable. This does not seems to be the case on iCE40 (see #220 ), so
hand optimize it. On 256MB aligned addresses, it should be equivalent to the
old decoder used by previously in LiteX.
The only requirement is that to have address aligned on size, which was already
the case. An assertion will trigger it this condition is not respected.
2019-07-22 08:53:54 +02:00
0eff65bb31
cores/up5ksram: optimize bus.adr decoding
2019-07-22 07:55:47 +02:00
bb99c4685a
cores/up5kspram: simplify and add support for all width/depth configurations
2019-07-21 19:28:31 +02:00
eaf84b8581
cores/pwm: remove clock_domain support (better to use ClockDomainsRenamer), make csr optional
2019-07-20 12:57:32 +02:00
ea619e3afe
cores/spi: rename add_control paramter to add_csr
2019-07-20 12:56:37 +02:00
ec411a6ac1
soc_core: add SoCMini class (SoCCore with no cpu, sram, uart, timer) for simple designs
2019-07-20 12:52:44 +02:00
8335f13fb1
bios/boot: rework netboot/flashboot for VexRiscv in linux variant
...
Get rid of NETBOOT_LINUX_VEXRISCV/FLASHBOOT_LINUX_VEXRISCV defines
and use information about CPU_TYPE and CPU_VARIANT instead.
Use common kernel/rootfs/device tree/emulator images layout
when booting over network and from flash.
2019-07-15 16:02:58 +02:00
a19bdd0e6a
soc_core: generate extra string-based config defines
...
C preprocessor does not allow to compare strings, so
the current defines are not usable at the compile time.
This adds new defines that can be ifdefed.
2019-07-15 15:58:54 +02:00
005c07769b
soc_core: include information about cpu variant in csv and headers
2019-07-15 15:58:54 +02:00
c6c743915a
soc: cores: fix name of EHXPLLL output clock in ECP5PLL
2019-07-14 12:27:28 -07:00
d3aaaf5e6c
cores/spi: fix/simplify loopback
2019-07-13 13:10:27 +02:00
769d15d433
cores/spi: move CSR control/status to add_control method, add loopback capability and simple xfer loopback test
...
Moving control/status registers to add_control method allow using SPIMaster directly with exposed signals.
Add loopback capability (mostly for simulation, but can be useful on hardware too).
2019-07-13 12:55:19 +02:00
ee8fec10ff
soc/cores: add ECC (Error Correcting Code)
...
Hamming codes with additional parity (SECDED):
- Single Error Correction
- Double Error Detection
2019-07-13 11:44:29 +02:00
7dbddb3a56
platforms/tinyfpga_bx: add serial extension
2019-07-13 11:43:16 +02:00
95796c5b29
Merge pull request #218 from railnova/zynq
...
[fix] Slave interface HP0 clk name
2019-07-12 18:00:03 +02:00
dcf55ad4f3
[fix] Slave interface HP0 clk name
2019-07-12 16:37:23 +02:00
dacec6aa86
spi: change CSR to CSRStorage
2019-07-12 14:12:51 +02:00
be280bed5e
soc_zynq: use zynq fabric reset as sys reset
2019-07-12 09:52:50 +02:00
220f43753b
soc_zynq: add missing axi hp0 clock
2019-07-10 16:51:08 +02:00
9c8c037108
soc_zynq: move axi gp0 clock connection to add_gp0 method
2019-07-10 16:50:06 +02:00
b0192e5f8b
soc_core: use fixed 16MB CSR address space
...
Using too small CSR address space cause a regression on PCIe SoC, this would
need to be understood if we want to reduce CSR address space under 16MB.
2019-07-10 10:39:00 +02:00
68a503174c
soc_sdram: limit main_ram to 512MB for now
...
Otherwise breaks linux-on-litex-vexriscv for targets with 1GB of ram, could
be removed when mem_map will be reworked on linux-on-litex-vexriscv.
2019-07-09 12:14:50 +02:00
21a5aaa4a6
soc_core: declare csr address size when registering csr, fixes #212
2019-07-08 22:58:07 +02:00
41b6fbde42
soc_cores: fix typos
2019-07-08 22:56:14 +02:00
e42f33ede1
soc_core: additional csr_alignment follow-up fixes
...
- Update a few additional places to use DFII_ADDR_SHIFT instead of
a hard-coded 4, which assumed 32-bit alignment.
- Force 64-bit alignment Rocket -- the only supported configuration!
This is a fixup for commit f4770219
2019-07-08 10:15:14 -04:00
f4770219fa
soc_core: add csr_alignment to allow 64-bit alignment with 64-bit CPUs
2019-07-08 10:20:51 +02:00
927b7c13a2
soc/integration: uniformize configuration constants declaration in SoCs (use self.config instead self.add_constant)
2019-07-08 08:57:05 +02:00
96f45bbd87
software/libbase/id: update code (length is now fixed to 256)
2019-07-06 17:18:34 +02:00
282ae96354
cores: add simple PWM (Pulse Width Modulation) module
2019-07-05 19:39:08 +02:00
77e7f9b3c1
core/spi: make cs_n optional (sometimes managed externally)
2019-07-05 19:18:52 +02:00
e726ad80ac
cores/spi_flash: add non-memory mapped S7SPIFlash modules based on SPIMaster (for design were we only want to re-program the bistream)
2019-07-05 19:01:55 +02:00
4c18c991bc
cores: add ICAP core (tested with reconfiguration commands)
2019-07-05 18:30:34 +02:00
6b82f23ce1
cores: add simple and minimal hardware SPI Master with CPOL=0, CPHA=0 and build time configurable data_width and frequency.
2019-07-05 15:50:58 +02:00
ada70e8c52
soc/cores/spi: remove too complicated and does not seem reliable in all cases.
2019-07-05 14:38:09 +02:00
7cd5c0f39b
cores: add bitbang class with minimal hardware for I2C/SPI software bit-banging
2019-07-05 14:26:10 +02:00
d29b841997
cores: remove nor_flash_16 (obsolete, most of the boards are now using SPI flash)
2019-07-05 13:13:31 +02:00
3f6bd266d9
cores/gpio: remove Blinker
2019-07-05 13:09:21 +02:00
4ee9c53f18
csr: add assert to ensure CSR size < busword (thanks tweakoz)
2019-07-03 13:44:15 +02:00
0116b2b708
soc_core: update default RocketChip mem_map
2019-06-28 23:40:01 +02:00
9d170b0944
soc_core: rearrange default mem_map
2019-06-28 23:27:23 +02:00
05b667bb95
bios/main: fix #ifdefs for fw command
2019-06-28 22:42:02 +02:00
37687579e0
libnet/tftp: fix compilation warning
2019-06-28 22:32:45 +02:00
9f3c8a9b8a
bios/main: fix spiflash compilation warnings
2019-06-28 22:18:24 +02:00
2da59b29e2
soc_sdram: allow main_ram_size > 256MB (limitation no longer exists)
2019-06-28 22:10:25 +02:00
b8d45af5c3
targets: use new prefered way to add wishbone slave
2019-06-28 22:10:20 +02:00
7618b84533
soc_core: use new way to add wisbone slave (now prefered)
2019-06-28 22:10:15 +02:00
740629ba53
soc_core: remove 256MB mem_map limitation
...
mem_map was limited to 8 256MB for simplicity but has become an issue for
complex SoCs. Default mem_map size is still 256MB (retro-compatibility) but
size can now be specified.
2019-06-28 22:10:02 +02:00
b65968c329
soc/core: remove #!/usr/bin/env python3
2019-06-28 21:37:52 +02:00
5a42dbf333
BIOS: TFTP: ASCII spinner progress indicator (cosmetic)
2019-06-27 10:31:33 -04:00
d5177d72ac
Merge pull request #204 from antmicro/write_to_flash
...
fw (flash write) command
2019-06-25 19:10:17 +02:00
cef2369015
core/spi_flash: re-integrate bitbang write support
2019-06-25 19:09:30 +02:00
2ee194b259
bios: add fw (flash write) command
2019-06-25 16:58:12 +02:00
dc03b7fab9
boards: community supported boards are now located at https://github.com/litex-hub/litex-boards
2019-06-24 12:05:02 +02:00
0af017e67c
liteeth: update mac imports (olds still works, but that's now the prefered way)
2019-06-24 11:45:01 +02:00
ecf999b8c7
soc/cores: add usb_fifo with FT245 USB FIFO PHY from LiteUSB, deprecate LiteUSB
...
LiteUSB was not up to date was not a real USB PHY but was just providing USB FIFO PHYs.
New true USB cores are now available: Daisho, ValentyUSB, so it's better using
then for true USB support. We only keep the FT245 FIFO PHY in LiteX that can be
useful to interface with USB2/USB3 USB FIFOs.
2019-06-24 10:58:36 +02:00
8f6e66ca52
make sure #!/usr/bin/env python3 is before copyright header
2019-06-24 07:29:24 +02:00
daa4307d9e
add CONTRIBUTORS file and add copyright header to all files
2019-06-23 23:23:56 +02:00
361f9d0dff
bios/sdram: set init_done/error when DDRCTRL is present (litedram_gen)
2019-06-22 10:55:15 +02:00
d8ac936206
Convert top level comment to a docstring.
2019-06-21 12:03:30 -07:00
7656f54d0a
soc: cores: add up5kspram module
...
The ICE40UP5K has 128 kB of SPRAM that's designed to be used
as memory for a softcore. This memory is actually 4 16-bit
chunks that we can gang together to give us either 64 kB or
128 kB.
Add a module that will allow us to use this memory in an ICE40.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-06-20 11:12:46 -07:00
73dbffe8f2
cores/frequency_meter: allow passing clk to be measured as a parameter
2019-06-20 09:03:30 +02:00
ab827d210d
tools/litex_sim: fix default endianness for mem_init
...
Initializing ROM and/or RAM content requires knowing the CPU
endianness before the SimSoC->SoCSDRAM->SoCCore constructor
sequence is invoked (before the SoC's self.cpu.endianness
could be accessed). Given that the majority of supported CPU
models use "little", set it as the new default, and override
only for the two models that use "big" endianness.
2019-06-18 16:55:58 -04:00
f75863fc31
cpu/rocket: add "linux" (MMU) and "full" (MMU & FPU) variants
2019-06-18 06:46:24 -04:00
c0df9e0823
cpu/rocket: update submodule
2019-06-18 09:44:13 +02:00
87118d509c
integration/soc_core: move cpu_variant checks/formating to cpu
2019-06-17 09:55:27 +02:00
f6b67a6dae
cpu/vexriscv: add "linux+no-dsp" variant
2019-06-17 09:54:17 +02:00
95b1b454f4
cpu/vexriscv: update
2019-06-17 09:24:57 +02:00
e46d287b64
targets/ulx3s: use CAS latency of 3 to be compatible with production boards
2019-06-17 09:20:21 +02:00
ca70ea91e4
bios: Fix build when ethphy is present but ethmac is not.
...
While testing my Ethernet DMA, I renamed the `ethmac` module to `ethmac_dma` so that it wouldn't be used from the BIOS, but I got an undefined reference to `eth_init` because `bios.c` checks different CSR defines than the code that defines `eth_init`.
2019-06-13 01:02:22 +02:00
33d7cc5fc8
Merge pull request #198 from TomKeddie/tomk_20190610_artyspi
...
boards/arty : Add directly connected spi clk pin
2019-06-11 15:50:02 +02:00
5346c3684f
boards/arty : Add directly connected spi clk pin to avoid need for STARTUPE2
2019-06-10 08:33:02 -07:00
243d7c7696
soc/cores: add PRBS (Pseudo Random Binary Sequence) Generator/Checker
...
Imported from LiteICLink. PRBS can be useful for different purposes, so is
better integrated in LiteX.
2019-06-10 16:05:36 +02:00
cfa952b062
tools/litex_term: exit on 2 consecutive CTRL-C
...
When running OS with LiteX and when LiteXTerm is use, we want to be able to
send CTRl-C to the OS. Ensure a specific sequence is sent to close the terminal.
2019-06-10 15:06:57 +02:00
1c34b4a015
cpu/vexriscv: update submodule
2019-06-10 12:57:21 +02:00
850b311d04
cpu/vexriscv: update submodule
2019-06-07 18:36:46 +02:00
755a2660ba
build/sim: allow configuring verilator optimization level
2019-06-07 12:28:20 +02:00
4b6ad8aa0d
build/sim: allow defining start/end cycles for tracing
2019-06-07 11:50:57 +02:00
ecb60f6e43
build/sim: use -O0 for verilator compilation
...
In most of the case, execution speed is already fast enough with -O0 and
with complex design -O0 is a lost faster to compile than -O3. In the future
we could add a switch to choose which optimization we want.
2019-06-07 11:16:39 +02:00
c64129dc69
soc/integration/soc_core: list rocket as supported CPU
2019-06-07 11:14:36 +02:00
ca4e7811e9
software/bios: change prompt to "litex" in green.
2019-06-07 11:13:36 +02:00
8d0f008a3b
integration/soc_core: improve readibility (add separators/comments)
2019-06-05 23:43:16 +02:00
e545b15f66
Merge pull request #196 from msloniewski/de10lite_support
...
De10lite support
2019-06-05 19:44:54 +02:00
04ce479035
boards/targets: add target for de10lite platform
2019-06-05 18:57:59 +02:00
f2a740d51d
boards/platforms: add de10lite Terasic platform support
2019-06-05 18:57:59 +02:00
a826aacac0
build/altera: Add possibility to turn off generation of .rbf file
...
For some FPGAs (e.g. MAX10) .rbf file cannot be generated.
Add possibility to turn off that feature for those chips.
2019-06-05 18:57:59 +02:00
93b61a65bf
integration/builder: generate flash_boot address to csv
2019-06-05 17:37:23 +02:00
d0b019b1f0
integration/builder: generate shadow_base address to mem.h and csv
2019-06-05 17:37:09 +02:00
f88b85a31c
software/libbase: memcpy: simple, arch-width agnostic implementation
...
Remove optimizations targeted specifically at rv32 architecture,
allowing memcpy to work on all word sizes.
Since this is "only" the BIOS, it is also arguably better to
optimize for size rather than performance, given that control
will be quickly handed over to some other program being loaded.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-06-04 14:48:51 -04:00
42e9d09755
Merge pull request #192 from sutajiokousagi/pr_c99_types
...
fix signed char type to be explicitly signed
2019-06-02 16:54:20 -07:00
ab0b2cac2e
fix signed char type to be explicitly signed
2019-06-03 06:01:13 +00:00
200d413def
update stdint.h to include c99 types
...
needed for some third party libraries to compile
2019-06-02 22:27:12 +00:00
db890736ea
fix csr_name in add_csr()
2019-06-02 20:56:02 +02:00
40cbe3a952
fix interrupt_name
2019-06-02 20:52:31 +02:00
220e2bdc6e
boards/platform/arty: add Arty A7-100 variant
2019-06-02 19:10:44 +02:00
8e6ecfb974
Merge pull request #189 from open-design/terasic-boards
...
Add support for Terasic DE2-115 and Terasic DE1-SoC boards
2019-06-02 18:40:57 +02:00
6cf1a814eb
boards: add Terasic DE2-115 initial support
...
See https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=139&No=502&PartNo=1
for board details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2019-06-02 11:33:10 +03:00
037259917a
boards: add Terasic DE1-SoC Board support
...
See https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&No=836
for board details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2019-06-02 11:26:21 +03:00
273a3ea15d
soc/integration/cpu_interface: improve code legibility
...
Factor out code appearing in both branches of an if/else.
2019-05-29 10:07:43 -04:00
08a811b1a5
soc/interconnect/gearbox: add msb_first/lsb_first order
2019-05-29 10:25:25 +02:00
675f78304e
boards/targets/arty: generate 25MHz ethernet clock with S7PLL
...
Allow ethernet to work when sys_clk_freq != 100MHz
2019-05-28 09:55:06 +02:00
26e6355fd6
litex/boards/targets: don't use tab for indentation
...
Fix pep8 E101 "indentation contains mixed spaces and tab" error.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2019-05-26 12:00:03 +03:00
5109511259
soc/interconnect/axi: add round/robin arbitration between writes/reads
2019-05-25 10:02:31 +02:00
961101d809
bios/irc: remove compilation workaround
2019-05-25 09:24:48 +02:00
712977a0cf
software/bios/isr.c: workaround compilation issue (need to be fixed)
2019-05-24 10:18:50 +02:00
28ba8b3201
soc/integration/soc_core: revert default mem_map (do specific RocketChip remapping for now)
2019-05-24 10:18:32 +02:00
cf369c437c
boards/targets: revert default sys_clk_freq on nexys4ddr/versa_ecp5 (but add parameter to configure it)
2019-05-24 10:18:26 +02:00
019fd94005
fixup: generated-verilog submodule for experimental Rocket support
...
FIXME: This patch uses https://github.com/gsomlo/rocket-litex-verilog ,
however in the long term it would perhaps be better if enjoy-digital
hosted the generated-verilog repository.
Once that's in place, I'd be happy to re-spin (and squash) this patch
on top of its parent -- GLS
2019-05-23 18:22:37 -04:00
1a530cf27d
soc/cores/cpu/rocket: Support for 64-bit RocketChip (experimental)
...
Simulate a Rocket-based 64-bit LiteX SoC with the following command:
litex/tools/litex_sim.py [--with-sdram] --cpu-type=rocket
NOTE: Synthesizes to FPGA and passes timing at 50MHz on nexys4ddr
(with vivado) and ecp5versa (with yosys/trellis/nextpnr), but at
this time does not yet properly initialize physical on-board DRAM.
On ecp5versa, using '--with-ethernet', up to 97% of the available
TRELLIS_SLICE capacity is utilized.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-05-23 15:59:51 -04:00
e90caa8683
tools/litex_sim: restore functionality of '--with-sdram' option
...
After LiteDRAM commit #50e1d478, an additional positional argument
('databits') is required by the PhySettings() constructor.
The value used here (32) will generate a 64MByte simulated SDRAM.
2019-05-23 08:56:50 -04:00
014c950580
remote: usb: print "access denied" error
...
When we get an error with errno 13, it means that the user doesn't
have access to the USB device. Rather than silently eating this
error and returning -1, print out a message to aid in debugging.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-05-21 09:36:18 +08:00
faf6554c89
remote: usb: use 0x43/0xc3 for packet header
...
The previous value -- 0xc0 -- is used by Windows all the time to query
special descriptors. This was causing a conflict when using the USB
bridge on a Windows device.
Change the magic packet from "Vendor: Device" queries to "Vendor:
Other" by setting the bottom two bits.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-05-21 09:14:18 +08:00
10670e22ac
soc/cores/minerva: update to latest
2019-05-17 22:21:57 +02:00
5707bdc0a4
boards/nexys4ddr: ethernet support fix-up
...
Commit 5f6e7874
2019-05-17 10:06:12 -04:00
0a8699f1e6
Merge branch 'master' of http://github.com/enjoy-digital/litex
2019-05-16 15:15:30 +02:00
526ba1b165
soc_core: remove csr_expose and add add_csr_master method
...
This could be useful in specific case were we don't have a wishbone master
but just want to have a csr bus and allow the user to define it.
/!\ Since there is no arbitration on between the CSR masters, use this with
precaution /!\
2019-05-16 15:14:55 +02:00
1ea22d49b7
software/include/base/csr-defs.h: add specific CSR_IRQ_MASK/PENDING for Minerva
2019-05-15 22:40:32 +02:00
f25707012f
software/bios/boot: remove specific linux commands (not needed with device tree)
2019-05-14 11:45:16 +02:00
938d00c283
boards/targets/de0nano: reduce to 50MHz sys_clk, simplify CRG
2019-05-14 11:45:12 +02:00
11838bae20
platforms/de0nano: change serial pins (put then next to the GND pin)
2019-05-14 11:45:06 +02:00
eb6fa45833
cpu/vexriscv/core: update
2019-05-13 10:59:26 +02:00
0cad80e935
cpu/vexriscv: update submodule (new linux variant)
2019-05-13 10:59:03 +02:00
5f6e787494
boards/nexys4ddr: add ethernet support (RMII 100Mbps)
2019-05-13 10:18:23 +02:00
0ba1cb8756
boards/targets/netv2: +x
2019-05-11 12:39:02 +02:00
2f2b9b319f
soc/cores: remove cordic
...
Cordic is useful for DSP cores but not as a Soc building block.
2019-05-11 09:36:53 +02:00
6e4ac1c493
LICENSE: clarify
2019-05-11 09:26:51 +02:00
67159349d6
soc/interconnect: remove axi_lite
...
axi_lite code was defining AXI4Lite signals and doing a AXI4Lite bridge to the
CSR bus when LiteX was not having proper AXI support. LiteX now has proper AXI
support and it also cover what axi_lite was doing: To create a AXILite to CSR
bus, user can create an AXILite2Wishbone bridge and then connect the CSR bus
directly to the wishbone bus as done in the others non-AXI SoC.
2019-05-11 09:12:20 +02:00
745d83a332
boards: add initial NeTV2 support (clocks, leds, dram, ethernet)
2019-05-10 18:55:40 +02:00
a49d170a6d
soc/integration/soc_sdram: simplify/fix main_ram_size computation using new databits value of the phy
2019-05-10 15:46:22 +02:00
7445b9e2e0
soc/integration/soc_core: allow user to defined internal csr/interrupts
...
For some designs with different capabilities, we want to run the same software
and then have the CSRs/Interrupts defined to a specific location.
2019-05-10 11:05:34 +02:00
f333abcfcb
boards/targets: use new add_csr method
2019-05-09 23:50:43 +02:00
d76a2c7db2
tools/litex_sim: add uart csr (required when with_uart=False with new add_csr method)
2019-05-09 23:33:08 +02:00
b6be534cd6
soc/integration/soc_core: rework csr assignation/reservation
...
Similar refactor than on interrupts. Adds a add_csr method but still
retro-compatible with old way to declare CSRs.
2019-05-09 23:32:22 +02:00
3f09af6d6e
boards/targets: declare ethmac interrupt with new add_interrupt method
...
The previous way to define interrupt is still valid, but using add_interrupt
method will ease maintenance
2019-05-09 12:13:15 +02:00
2abb3e809c
Merge branch 'master' of http://github.com/enjoy-digital/litex
2019-05-09 11:57:19 +02:00
47dc87584f
integration/soc_core: rework interrupt assignation/reservation
...
The CPUs can now reserve specific interrupts with reserved_interrupts property.
User can still define interrupts in SoCCore.interrupt_map (old way) or use
add_interrupt method. Interrupts specific to SoCCore internal modules are
allocated automatically on the remaining free interrupt ids.
Priority for the interrupts allocation:
- 1) CPU reserved interrupts.
- 2) User interrupts.
- 3) SoCCore interrupts.
2019-05-09 11:54:22 +02:00
435cdad083
boards/targets: fix ulx3s/versa_ecp5 build
2019-05-09 11:48:32 +02:00
8caa38bc25
cpu: add `reserved_interrupts` property
2019-05-09 09:00:06 +02:00
c264a00964
soc/integration/cpu_interface: more arch-specific address size fixes
...
When generating arch-specific include files (generated/[mem|csr].h)
ensure address literal defines are suffixed by 'L', denoting their
'unsigned long' type. This inhibits compiler warnings when values
computed based on these constants are cast to pointers.
Also ensure csr_[read|write][b|w|l]() function declarations have
'unsigned long' address arguments.
Finally, restore the correct (32-bit, (unsigned *)) expected
behavior of the MMPTR() macro, inadvertently converted to an
arch-specific sized access (unsigned long *) by commit 5c2b8685
2019-05-08 16:03:36 -04:00
ff5179153c
boards/targets: make sys_clk_freq a parameter
...
Most of the targets can now generate an abritrary sys_clk_freq from onboard XO.
2019-05-07 18:44:03 +02:00
a8cbe4ad84
boards/targets/minispartan6: for now revert experimental s6pll clocking
2019-05-07 13:05:28 +02:00
6fcbf10eb9
boards/plarforms/minispartan6: default to xc6slx25
2019-05-07 12:48:36 +02:00
b7e3713388
bios/boot/ update linux memory mapping
2019-05-07 11:59:28 +02:00
190ff89aaa
tools/litex_term: add json support to load images to memory, allow passing speed as float
...
example json file (serialboot.json):
{
"binaries/Image": "0xc0000000",
"binaries/rootfs.cpio": "0xc2000000",
"binaries/rv32.dtb": "0xc3000000",
"emulator/emulator.bin": "0x20000000"
}
example command:
lxterm --images=serialboot.json /dev/ttyUSBX
2019-05-06 23:56:33 +02:00
a048ba47c4
vexriscv: Fix some floating signals
...
Signed-off-by: David Shah <dave@ds0.me>
2019-05-04 17:27:21 +01:00
fcd518b5d0
bios/boot: add specific flash_boot for linux with vexriscv
2019-05-04 11:27:01 +02:00
1ba1ad9a00
bios/boot: rename MM_RAM to EMULATOR_RAM
2019-05-03 19:47:36 +02:00
fbb24720f0
soc/get_mem_data: add direct support for regions
...
We now support passing filename (offset=0), json file and regions
2019-05-03 13:24:06 +02:00
0714816f31
soc/interconnect/axi: add AXI2AXILite converter and use it in AXI2Wishbone
2019-05-03 11:59:06 +02:00
c6d0d23445
soc/interconnect/axi: add AXI Lite definition
2019-05-03 09:43:12 +02:00
9fab4752c4
soc/interconnect/axi: add comment on axi signas that are present but not used
2019-05-03 09:30:59 +02:00
5989076346
cores/cpu/vexriscv: add VexRiscvTimer and use it for the linux variant
2019-05-03 09:30:26 +02:00
21bf10383d
bios/boot: add liftoff banner just before booting
2019-05-02 18:26:35 +02:00
8f4685b3b1
bios/boot/netboot: only get boot.bin as default, add linux_vexriscv netboot config
2019-05-02 16:34:41 +02:00
6cf1ff091c
soc/interconnect/axi: connect axi.ar/aw when selecting write or read
2019-05-02 09:58:55 +02:00
6affc56a09
soc/interconnect/axi: wishbone address shift is not always 2, make it generic
2019-05-02 09:35:07 +02:00
698bc88296
soc/interconnect/wishbone: allow setting adr_width (default to 30)
2019-05-02 09:34:30 +02:00
4dccb8a9eb
soc/interconnect/axi/AXI2Wishbone: add buffer on axi command to be sure command is accepted before response is sent
2019-05-01 12:59:04 +02:00
9f8f0eb18e
build/sim: update tapcfg
2019-05-01 12:34:12 +02:00
5c2b8685fc
software: use "unsigned long" for address values, also 8-byte alignment
...
Enable future support for 64-bit CPU models.
2019-04-29 15:03:38 -04:00
5c1d980540
soc/interconnect/axi: add burst support to AXI2Wishbone
2019-04-29 16:49:20 +02:00
6de2713524
soc/interconnect/axi: add capabilities to AXIBurst2Beat and simplify/optimize
2019-04-29 14:02:05 +02:00
305b8879de
integration/soc_core: use cpu name as cpu-type for all cpus (mor1kx was instanciated with or1k)
...
Keep or1k retro-compatibility for now but add a warning
2019-04-29 10:14:30 +02:00
4e50f36b72
build/tools: add deprecated_warning
2019-04-29 10:12:54 +02:00
b40d1b73c4
cpu_interface: default to gcc for all cpus unless told otherwise (mor1kx default was clang)
2019-04-29 10:00:04 +02:00
dbb71af189
cpu: use property methods to return name, endianness, gcc triple/flags, linker output format
2019-04-29 09:58:51 +02:00
d828c3a596
cpu: integrate nmigen version of Minerva, add submodule
2019-04-28 23:40:33 +02:00
bf27869ad9
fix vexriscv build
2019-04-28 11:10:20 +02:00
2d5bae3def
Merge pull request #175 from mithro/cpu-docs
...
Standardizing `cpu_variants` and adding lots of documentation
2019-04-27 21:24:06 +02:00
5cbc5bc199
Adding testing of cpu variants.
2019-04-26 18:57:49 -05:00
71a837315a
Work with no `cpu_variant` provided.
2019-04-26 17:44:36 -05:00
39c579baa2
Standardize the `cpu_variant` strings.
...
Current valid `cpu_variant` values;
* minimal (alias: min)
* lite (alias: light, zephyr, nuttx)
* standard (alias: std) - Default
* full (alias: everything)
* linux
Fully documented in the [docs/Soft-CPU.md](docs/Soft-CPU.md) file
mirrored from the
[LiteX-BuildEnv Wiki](https://github.com/timvideos/litex-buildenv/wiki ).
Also support "extensions" which are added to the `cpu_variant` with a
`+`. Currently only the `debug` extension is supported. In future hope
to add `mmu` and `hmul` extensions.
2019-04-26 17:44:30 -05:00
3a2e283613
.gitmodules: use our VexRiscv-verilog
2019-04-27 00:00:55 +02:00
78c09125be
soc/integration/soc_core: fix get_mem_data when not file is not multiple of 4 bytes
2019-04-25 23:43:10 +02:00
0175f86cb2
soc/integration/soc_core: fix get_mem_data for json files
2019-04-25 18:36:47 +02:00
4443b5075b
soc/integration/soc_core: add integrated_sram_init
2019-04-25 17:30:03 +02:00
f27084c6c0
soc/integration/cpu_interface: fix banner in get_mem_header
2019-04-24 22:44:37 +02:00
d21cba2f17
build: handle exceptional case when litex/migen not deployed as git repo
2019-04-24 12:50:47 -04:00
27fbb814ab
tools/remote/csr_builder: allow comments in csv file and cleanup
2019-04-24 12:25:49 +02:00
e8f3c49127
software/libnet/microudp: rearrange send_packet, add comments and remove txlen padding
2019-04-24 11:32:40 +02:00
44e0cdda9a
software/libnet/microudp: speed-up ARP by changing timeout/tries
...
First ARP request does not seem to be transmitted (the link is probably not
fully established). Reduce the timeout between tries and increase number of
tries.
2019-04-24 09:55:41 +02:00
3ee78a5b70
build/tools: fix typo
2019-04-23 18:10:51 +02:00
9ded2eb20b
tools/litex_term: change TERM prompt to LXTERM
2019-04-23 17:46:02 +02:00
475deb51ac
build: add migen and litex git revision to generated file
2019-04-23 17:40:24 +02:00
8b5cf29542
build/tools: git_revision is not doing what we want, return "--------" for now
2019-04-23 17:15:43 +02:00
0f60ec35e2
tools/litex_server: fix comms import
2019-04-23 14:25:27 +02:00
68f12495cf
soc/integration: also add sha-1/date to generated software files
2019-04-23 13:17:54 +02:00
425741226c
build: add sha-1/date to generated verilog, change git_version to git_revision
2019-04-23 12:59:25 +02:00
818dfae1e8
boards/platforms/ulx3s: fix default clock
2019-04-23 11:37:29 +02:00
17b6164cd9
boards/platforms/sp605: apply same simplifications than on others platforms
2019-04-23 11:21:55 +02:00
24bf02934e
boards/platforms: add SP605
2019-04-23 11:15:42 +02:00
10cf0fdea3
cores/cpu/vexriscv: fix wrong revert
2019-04-23 11:13:29 +02:00
d2ad14417a
targets/ac701: cleanup and make it similar to others targets.
...
Still supports EthernetSoC with RGMII and 1000BaseX.
2019-04-23 11:10:35 +02:00
a24bf72fc7
targets/xilinx: remove keep attribute on clock going to idelayctrl
...
Causes P&R issues with Vivado.
2019-04-23 10:51:36 +02:00
ea8dbff86e
boards/platform/ac701: add proper copyright, cleanup to be similar to others platforms
2019-04-23 10:50:19 +02:00
0122982e09
boards/platforms/kc705: provide only one default programmer as others platforms
2019-04-23 10:00:52 +02:00
89a590263f
boards: Xilinx ac701 dev board support
2019-04-23 09:48:16 +02:00
88b882c7e0
build/xilinx/ise.py: write .v file for post synthesis sim
2019-04-23 09:22:48 +02:00
7396ebbb38
build/xilinx/programmer: cleanup XC3SProg position parameter
2019-04-23 09:20:59 +02:00
f579cbc603
build/xilinx/programmer: add position parameter to XC3SProg
2019-04-23 09:16:42 +02:00
535d86727a
targets/minispartan6: use S6PLL in CRG
2019-04-23 06:44:29 +02:00
40342404f2
cores/clock: add divclk_divide_range on S6PLL/S6DCM
2019-04-23 06:43:48 +02:00
0d282f38f9
cores/clock: use common XilinxClocking class for all Xilinx clocking modules
2019-04-23 06:35:39 +02:00
83699ea0a5
cores/clock: add initial Spartan6 PLL/DCM support
2019-04-23 06:23:00 +02:00
eff141da2d
build: add git version (sha-1) used to create the scripts
2019-04-23 06:03:12 +02:00
Florent Kermarrec
Martin Cornil
Gabriel Somlo
Ilia Sergachev
Jan Kowalewski
Benjamin Herrenschmidt
Sean Cross
Filip Kokosinski
Vamsi K Vytla
Tim 'mithro' Ansell
Antti Lukats
chmousset
Daniel Kucera
Ilia Sergachev
Mateusz Holenko
Francis Lam
Ilia Sergachev
William D. Jones
Ambroz Bizjak
Tom Keddie
msloniewski
bunnie
Antony Pavlov
David Shah
Kurt Kiefer
Michael Betz
Vamsi K Vytla