931f6667ac
targets/kc705: add initial SATA support.
2020-10-26 15:15:24 +01:00
51934567fe
Merge pull request #118 from daveshah1/lifcl-vip
...
Add CrossLink-NX VIP board platform and target
2020-10-22 11:03:47 +02:00
a38c1e7062
mist: add copyrights.
2020-10-22 10:48:58 +02:00
20720693c4
crosslink_nx_vip: Add HyperRAM support
...
Signed-off-by: David Shah <dave@ds0.me>
2020-10-22 09:15:40 +01:00
b278d8bccc
Add CrossLink-NX VIP board platform and target
2020-10-22 09:15:35 +01:00
4541c39e94
Initial support for the MIST board ( https://github.com/mist-devel/mist-board/wiki )
2020-10-17 12:28:22 +02:00
814e7630e4
targets/xilinx: use generic name for idelay clk (avoid clk200, clk400, etc...) since we somtimes want to change it.
2020-10-13 12:10:29 +02:00
06137452d2
targets/xcu1525: use ddram_channel to select clk300.
2020-10-13 11:57:00 +02:00
982cfd5ad5
platforms/xcu1525: fix ddram constraints, add clk300 constraints for all channels.
2020-10-13 11:50:36 +02:00
c3ea04b6e9
targets/s7/us: update sdram (manual cmd_latency no longer needed).
2020-10-12 18:46:21 +02:00
ddf7038c78
ulx3s: add 1.7 and 2.0 revisions support.
2020-10-12 13:23:26 +02:00
204d22c62b
Merge pull request #115 from BryanJacobs/master
...
platforms/ulx3s: Update ULX3S SD pins for revision 2.0
2020-10-12 12:55:17 +02:00
3b11e60fb1
Update ULX3S SD pins for revision 2.0
2020-10-11 14:17:48 +11:00
5e67853a21
versa_ecp5: Add --eth-phy to select ethernet phy
...
This also simplifies the logic a bit.
2020-10-09 23:56:16 +02:00
477734ff06
versa_ecp5: Add etherbone support
...
Etherbone can be enabled with --with-etherbone
2020-10-09 00:53:08 +02:00
55da8b867a
platforms/zedboard: minor cleanups to uniformize with other platforms.
2020-10-07 11:25:20 +02:00
e225cbd28f
add zedboard platform to CI
2020-10-06 11:35:03 -07:00
8ee20a3f30
clean up imports
2020-10-06 11:24:34 -07:00
865c2bd98c
zedboard platform: clean up
...
* remove unused code
* remove oled integration code
* openocd = default programmer
2020-10-06 11:00:36 -07:00
94ef096e77
Merge branch 'master' of https://github.com/litex-hub/litex-boards into HEAD
2020-10-06 10:05:34 -07:00
fff20f7532
targets/fomu: base it on iCEBreaker target + USB-ACM.
...
This uniformizes Fomu target with others, provide a simple example of LiteX SoC
on Fomu and will ease maintenance.
2020-10-06 11:39:30 +02:00
12aed44577
add zedboard platform
2020-10-06 00:28:54 -07:00
79ef091a06
Merge pull request #110 from pepijndevos/gowin
...
Add initial support for Trenz TEC0117 board
2020-10-05 19:50:09 +02:00
2ee32f2a15
Merge pull request #109 from geertu/orangecrab-Fix-r0.1-user_led-mapping
...
orangecrab: Fix r0.1 user_led mapping
2020-10-02 09:40:41 +02:00
062fbd6c63
Merge pull request #108 from daveshah1/dave/nx-evn-doc
...
crosslink_nx_evn: Improve documentation on UART jumpers
2020-10-02 09:40:04 +02:00
18e5def9f2
don't verify erase, very slow
2020-10-01 08:41:16 +02:00
81e4f1f158
add initial support for Trenz TEC0117 board
2020-09-30 14:01:36 +02:00
b2e34f5faf
orangecrab: Fix r0.1 user_led mapping
...
On r0.1, all three user_leds are mapped to the same pin.
Fix this by mapping them to the pins connected to the individual
channels of the RGB LED, to match the comments, the schematics, and the
spirit of r0.2.
Untested on real hardware (I have r0.2 only).
Fixes: c94cbae0c0
2020-09-25 10:33:21 +02:00
de09b10726
targets/xcu1525: add ddram-channel selection and rewrite DRC workaround comment.
2020-09-24 18:19:49 +02:00
cc53206aff
targets/kcu105: create specific cd_eth for ethphy.
2020-09-24 10:25:55 +02:00
5b7288cfee
targets/kcu105: add Etherbone support.
2020-09-24 09:55:11 +02:00
77ba49f2bb
targets/pcie: update timing_constraints (now provided by the .xci).
2020-09-24 09:50:55 +02:00
c6610b4a3f
platforms/xcu1525: update ddram1/2/3 pinout.
...
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMMx.xdc
2020-09-20 21:07:00 +02:00
e5a144e9cd
platforms/xcu1525: update ddram0 pinout.
...
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMM0.xdc .
2020-09-19 23:28:34 +02:00
8ffb86c0dc
platforms/fk33/xcu1525: define pcie_x2/x4/x8/x16.
2020-09-19 22:37:05 +02:00
e4cdbe0f7a
targets/ac701: reduce ddram pads to the first 4 modules.
2020-09-05 11:46:07 +02:00
8a9fd02768
crosslink_nx_evn: Improve documentation on UART jumpers
...
Signed-off-by: David Shah <dave@ds0.me>
2020-09-05 09:58:28 +01:00
76ac4a69a8
rename forest_kitten_33 platform/target to fk33.
2020-09-04 20:05:18 +02:00
979fee7517
forest_kitten_33: add pcie.
2020-09-04 20:02:43 +02:00
ad48728160
xcu1525: update headers (were still using old format).
2020-09-04 19:59:09 +02:00
ad4c483c32
Merge pull request #106 from daveshah1/dave/alveo_u250_pcie
...
alveo_u250: Add PCIe x4 support
2020-09-04 19:22:48 +02:00
a68c00e48e
Merge pull request #104 from DerFetzer/colorlight_5a_75e_v6_0
...
Add support for 5A-75E V6.0 board
2020-09-04 19:21:02 +02:00
ae6a052e57
alveo_u250: Add PCIe x4 support
...
Based on the implementation in xcu1525
Signed-off-by: David Shah <dave@ds0.me>
2020-09-04 14:20:04 +01:00
2eda9d0252
xcu1525: add DDR4 IOs for C1/C2/C3 and fix compilation (untested).
2020-09-04 11:34:33 +02:00
7b6b71d4e3
xcu1525: add initial DDR4 support in C0 (untested).
2020-09-03 19:48:23 +02:00
5a62a07b45
xcu1525: add initial PCIe support (untested).
2020-09-03 19:26:02 +02:00
51e881d1ff
add minimal xcu1525 support (VCU1525 or BCU1525 boards).
2020-09-03 19:06:43 +02:00
8bd736bd77
targets/colorlight_5a_75x: make Ethernet PHY selectable, cast sys_clk_freq to int for Wishbone
2020-09-02 22:08:45 +02:00
cc78574297
targets/colorlight_5a_75x: fix rx_data pin order for Ethernet PHY 0
2020-09-02 22:04:23 +02:00
24b853c2db
targets/colorlight_5a_75x: force use of internal oscillator when using Ethernet with 5A-75E V6.0
2020-09-01 17:07:52 +02:00
8b1fee0e66
Add support for 5A-75E V6.0 board
2020-09-01 17:02:17 +02:00
9b6ed6bdf1
targets/orangecrab: add fallback to bootloader when usr_btn is pressed for 1 second.
2020-09-01 16:22:32 +02:00
b9ac72cf78
targets: simplify clocking on iCE40/ECP5 targets (AsyncResetSynchronizer now integrated in PLL).
2020-09-01 13:38:32 +02:00
9e2d301745
targets/icebreaker: simplify, update PLL/API and BIOS execution from SPI Flash.
2020-09-01 12:58:13 +02:00
beccecf59f
orangecrab: reduce DDR3 power consumption/heat and get back USB PLL to CRGSDRAM.
...
- disable DQ termination.
- disable RTT_NOM.
- drive VCCIO/GND pads.
Reduce current from 0.25A to 0.12A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=48e6.
Still working at 96MHz, 0.17A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=96e6.
See https://github.com/enjoy-digital/litedram/issues/216 .
2020-08-28 20:01:54 +02:00
63b65e278c
crosslink_nx_evn: update copyrights.
2020-08-24 22:33:58 +02:00
153326fa26
targets/icebreaker: update flash.
2020-08-24 17:19:15 +02:00
795e34aafd
add initial Crosslink-NX support.
2020-08-24 16:47:38 +02:00
84c19a6cdf
targets/de0nano: set sys2x_ps phase to 180° for sdram_rate=1:2.
2020-08-24 09:28:51 +02:00
70594a5305
ulx3s: simplify sdram constraints and increase phase to 180 for sdram_rate=1:2.
2020-08-24 09:05:58 +02:00
1781be166a
general: add SPDX License identifier to header and specify files are part of LiteX-Boards.
2020-08-23 15:00:17 +02:00
83d8b8d1b4
platforms/acorn_cle_215: integrated sdcard ios as extension.
2020-08-22 22:11:51 +02:00
f328909578
Moved platform call inside of BaseSoC init for compatibility with linux-on-litex-vexriscv support. Added optional spi-sdcard support over P2 header.
2020-08-09 16:27:41 -04:00
45bb329b56
targets/colorlight_5a_75x: enable HalfRate SDRAM PHY.
2020-08-07 19:26:12 +02:00
b6a1ad5a9c
targets/orangecrab: add simple CRG when built without DDR3.
2020-08-07 18:10:03 +02:00
869ceadacb
targets: use platform.request_all on LedChaser.
2020-08-06 20:04:03 +02:00
d2cd6d4c0e
arty: Change USB-uart and I2S Pmod configuration
...
This makes it compatible with the Arty A7 expansion board by Antmicro
(https://github.com/antmicro/arty-expansion-board ).
2020-08-05 11:54:25 +02:00
ee28d7b5ec
targets/ulx3s/add_oled: simplify.
2020-08-04 12:31:15 +02:00
eba70377b7
add optional OLED peripheral to ULX3S target
2020-08-04 11:07:30 +02:00
929e55d7e6
platforms/trellisboard: add SDCard PMOD pins.
2020-07-29 09:07:55 +02:00
5fd3e8dbcd
ecpix5: add SDCard.
...
Validated with Linux-on-LiteX-VexRiscv.
2020-07-28 17:45:49 +02:00
94ccf1dd3e
targets/trellisboard: simplify clocking when no DDR3, remove firmware_ram (was here for debug).
2020-07-27 16:31:46 +02:00
eb8a484032
targets/de10nano: fix typo.
2020-07-26 12:01:11 +02:00
2cef54a909
targets/colorlight_5a_75x: avoid sys_clk_freq of 125MHz with etherbone (no longer required).
...
This allows creating SoCs with CPU, SDRAM and Etherbone enabled all together.
2020-07-26 11:58:42 +02:00
760b8ff93a
arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard.
2020-07-24 16:29:35 +02:00
04fc98f834
de0nano/ulx3s: add sdram HalfRate support (untested).
2020-07-24 16:12:46 +02:00
d0ca1befa6
targets/de10nano/minispartan6: simplify HalfRate support, rename argument to sdram_rate.
2020-07-24 16:11:57 +02:00
9730c6f722
platforms/de10nano: use additional sdram constraints required for HalfRate.
2020-07-24 12:27:36 +02:00
7399d13cef
paltforms/de10nano/sdram: enable fast input/output on dq.
2020-07-24 11:27:25 +02:00
b4b1ab8621
paltforms/de10nano: simplify IO constraints (for consistency with others platforms).
2020-07-24 09:03:35 +02:00
89c5bf43cf
Merge pull request #92 from rob-ng15/master
...
Enable use of HalfRateGENSDRPHY on de10nano
2020-07-24 08:49:09 +02:00
1e1589a514
zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000).
...
This uses a pre-generated .xci hosted on github, still need to figure out where the best location for it.
2020-07-23 17:45:21 +02:00
7cda143250
Allow use of HalfRateGENSDRPHY
2020-07-23 14:41:35 +01:00
cf9839307f
Add Misc
...
Add Misc("") arguments to various inputs/outputs for stability. Allows de10nano to use HalfRateGENSDRPHY for sdram
2020-07-23 14:40:04 +01:00
8a3b453e2f
add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB.
2020-07-23 15:26:22 +02:00
e723bef49a
platforms/arty: add usb_uart_pmod_io (USB-UART PMOD on JA) to ease debug with a second UART (for UARTbone/LiteScope).
...
Also use pmod connector names in i2s_pmod and sdcard_pmod.
2020-07-22 14:41:09 +02:00
19d0b95867
platforms/targets: keep in sync with litex.
2020-07-22 08:53:49 +02:00
0ee4b215b9
trellisboard/ulx3s: fix sdcard slewrate.
2020-07-21 15:23:08 +02:00
7efa1c37a1
platforms/arty: add missing pullups on sdcard.
2020-07-21 15:22:39 +02:00
2ce24df76d
platforms/genesys2: add internal_vref to 0.750v on bank 34 (DDR3).
2020-07-18 22:18:41 +02:00
135c387155
platforms/ulx3s: add assertion for supported devices.
2020-07-17 12:04:06 +02:00
851378f0a9
platforms/trellisboard: move ddram_vtt_en.
2020-07-17 12:03:37 +02:00
165f9eacde
Merge pull request #91 from antmicro/jboc/gensdrphy
...
targets/minispartan6: add support for HalfRateGENSDRPHY
2020-07-15 08:22:57 +02:00
02f53e6326
targets/minispartan6: add support for HalfRateGENSDRPHY
2020-07-14 11:01:09 +02:00
44ad902aad
platforms/kc705.py: LPC DP0_M2C/C2M diff pair
2020-07-13 10:26:17 -07:00
a461f5ac59
orangecrab: add usb, rst_n signals for r0.1
...
- fix standard io extensions
- Use newly assigned code for orangecrab 1209:5af0
2020-07-09 19:56:32 +09:30
f3d02d8fca
Merge pull request #87 from antmicro/arty_i2s
...
arty: Add configuration of I2S pins
2020-07-07 17:22:10 +02:00
df54b93db3
arty: Add configuration of I2S pins
2020-07-07 15:25:10 +02:00
d9595a317e
targets/orangecrab: use user_btn as rst_n.
2020-07-06 17:49:05 +02:00
40fbbbbebc
platforms/orangecrab: add sdcard pins on r0_2.
2020-07-06 17:48:48 +02:00
7b1bf9d74a
targets: remove sdcard specific clock domain (now generated by the PHY).
2020-07-03 20:09:30 +02:00
31e6997e70
sdcard: rename cd_sdcard to cd_sd to avoid unnecessary clock domain.
2020-07-01 12:58:48 +02:00
fe3ea805bc
targets/pcie: make pcie optional (--with-pcie) and avoid forcing uart to crossover.
2020-06-30 18:44:00 +02:00
7a48a61605
targets: add indentifier on all targets.
2020-06-30 18:11:04 +02:00
fc22e28fe9
targets: replace PCIeSoC with BaseSoC.
2020-06-30 17:41:57 +02:00
d28a0c4258
targets/pcie: remove DNA/XADC/ICAP that were only on PCIe targets.
...
DNA/XADC/ICAP are demonstrated in LitePCIe repository and should probably be added with
a add_xy method.
2020-06-30 17:37:24 +02:00
e91a5d6b82
targets/pcie: remove soft reset.
2020-06-30 17:28:13 +02:00
1356ebb416
targets/ecp5: update clocking on boards with DDR3 to use reset from ddrphy.init and use primary clock for Power on reset.
2020-06-29 16:42:53 +02:00
49973990f3
Merge pull request #85 from oskirby/logicbone
...
Add Logicbone ECP5 board
2020-06-29 16:24:15 +02:00
76a32ba8ec
Add Logicbone ECP5 board
...
The Logicbone is an Open Source development board for the Lattice ECP5
being developed at https://github.com/oskirby/logicbone
2020-06-27 03:32:47 -07:00
efe33c9764
targets/arty: add fixed sdcard clock and remove sys2x (use NETWORKING interface_type on DDR3).
2020-06-25 11:21:24 +02:00
6753a92296
targets: add fixed sdcard clock on boards with SDCard support.
2020-06-25 11:20:38 +02:00
782c856619
platforms/genesys2: add usb_fifo.
2020-06-23 18:02:53 +02:00
936ba5b279
platforms/genesys2: add openocd specific configuration (channel 1 used for JTAG).
2020-06-23 11:55:50 +02:00
55ed9fbf02
platforms/kcu105: add sdcard/spisdcard.
2020-06-23 11:44:40 +02:00
eee00ebd0a
platforms/genesys2: add sdcard/spisdcard.
2020-06-23 11:44:26 +02:00
6568c8a3ae
platforms/netv2: add spisdcard.
2020-06-23 11:44:10 +02:00
7de7c4be5c
platforms/kc705: rename mmc to sdcard and make it similar to other boards.
2020-06-23 10:56:31 +02:00
0ecb8609b3
platform/arty: also update spisdcard.
2020-06-16 20:15:12 +02:00
7a8b0b743d
platforms/pano_logic_g2: -x.
2020-06-16 19:53:46 +02:00
f70655d1ac
Change sdcard Pmod from JB to JD
...
Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
2020-06-15 12:01:46 +02:00
04f6d4463a
versa_ecp5: simplify device (LFE5UM5G or LFE5UM) and adapt integrated_rom_size only for Microwatt.
2020-06-13 11:17:05 +02:00
90092164c8
Add device option for ECP5 Versa board
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
b1be5dcc23
Fix FTBFS from undersized BIOS ROM region with Microwatt
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
9b45ec0f35
de10lite: simplify vga terminal.
2020-06-11 19:59:32 +02:00
85cac7abc0
de10nano/Mister: review/simplify.
2020-06-11 19:54:55 +02:00
64372d7876
targets/orangecrab: add spi-sdcard and workaround for ValentyUSB.
2020-06-11 19:21:44 +02:00
c94cbae0c0
orangecrab: add user_led (RGB leds), DFUProg and --load support.
2020-06-11 19:21:40 +02:00
9aea2272eb
Merge pull request #80 from rob-ng15/master
...
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-11 18:16:18 +02:00
45bd50b000
targets: rename colorlight_5a_75b to colorlight_5a_75x (since we are now also supporting the 75e).
2020-06-10 23:14:37 +02:00
ad1693a1ad
Merge pull request #82 from Disasm/colorlight-5a-75e
...
Add Colorlight 5A-75E V7.1 board
2020-06-10 23:09:26 +02:00
b312c65eb9
Merge pull request #81 from Disasm/fix-5a-75b
...
Update J4 pin 5 on Colorlight 5A-75B V7.0
2020-06-10 23:07:33 +02:00
94861bbb9a
targets/orangecrab: uncomment MT41K512M16.
2020-06-10 19:30:07 +02:00
b6df166f5a
platforms/arty: add spisdcard to _sdcard_pmod_io.
2020-06-10 17:38:16 +02:00
00c8e40d02
platforms/ulx3s: add sdcard pins.
2020-06-10 17:37:50 +02:00
0c590abf12
Update colorlight_5a_75b target: add 5A-75E board support
2020-06-10 03:20:32 +03:00
1acdb962a5
Add 5A-75E V7.1 board
2020-06-10 03:07:20 +03:00
939f05fea4
Update J4 pin 5 on Colorlight 5A-75B V7.0
2020-06-10 02:49:18 +03:00
485c242f24
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-08 11:05:58 +01:00
e52d6aca5f
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-08 11:05:36 +01:00
f9a8edb973
targets/trellisboard: add initial LiteSDCard support
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-06-03 13:41:57 -04:00
d87a11a9cb
targets/pcie: use generate_litepcie_software on all targets with PCIe.
2020-06-03 08:30:54 +02:00
9f83b6e3cf
targets/acorn_cle_215: use new generate_litepcie_software functions and add --driver argument to generate driver.
2020-06-03 08:20:43 +02:00
091ec846a1
targets/acorn_cle_215: automatically copy software from litepcie and generate headers in kernel directory.
2020-06-02 20:09:45 +02:00
06edf48897
targets: rename gateware-toolchain parameter to toolchain.
2020-06-02 13:45:05 +02:00
0b11aba8a1
platforms/nexys_video: add spisdcard pins.
2020-05-29 19:37:04 +02:00
76df4e39c8
targets: simplify Ethernet/Etherbone integration on targets with both.
2020-05-29 19:20:27 +02:00
2e1a816d1f
pano_logic_g2: switch to LiteEthPHY and simplify Ethernet/Etherbone.
2020-05-29 10:41:35 +02:00
33fe308ef0
Merge pull request #78 from antmicro/jboc/spd-read
...
ZCU104: add I2C
2020-05-27 14:56:31 +02:00
e5578a1ae8
zcu104/platform: change I2C number to 0
2020-05-27 14:31:22 +02:00
ac1f1cd6a7
zcu104: add I2C
2020-05-27 12:47:43 +02:00
71f220a24d
colorlight_5a_75b: remove unnecessary parenthesis.
2020-05-27 10:13:44 +02:00
2f3817cba9
pano_logic_g2: add ethernet (build but not functional yet) and use user_btn_n as sys_rst.
2020-05-27 10:13:12 +02:00
f19bc36813
pano_logic_g2: add revision support (b and c, c as default) and add OpenOCD programmer.
...
Tested with:
./pano_logic_g2.py --uart-name=jtag_uart --build --load
./litex_jtag_uart.py --config=openocd_xc6_ft232.cfg
lxterm /dev/pts/X
2020-05-27 08:58:40 +02:00
d6518c7dc2
prog/openocd: fix openocd_xc6 cfgs.
2020-05-27 08:48:16 +02:00
22f18f618e
pano_logic_g2: move gmii_rst_n to _CRG.
2020-05-26 08:36:06 +02:00
0648c04158
Updated comment, added link to clocking documentation.
2020-05-25 14:48:24 -07:00
1ab46562bd
Take Ethernet PHY out of reset so default clock is 125 Mhz (and baud rate is 115,200)
2020-05-25 10:11:03 -07:00
9b572ece0e
forest_kitten_33: add minimal target and use es1.
...
Tested with:
./forest_kitten_33.py --uart-name=jtag_uart --build --load
litex/tools/litex_jtag_uart.py
lxterm /dev/pts/X
2020-05-25 12:26:52 +02:00
435913f7d8
platforms/nexys4ddr: add option to build with spi-mode sdcard support
2020-05-24 19:09:25 -04:00
0d549a8c89
platforms: add forest_kitten_33 initial platform suppport.
2020-05-24 11:22:02 +02:00
12b54a7a7f
platforms/alveo_u250: add clk300 clock constraints.
2020-05-24 11:18:30 +02:00
46f78b5002
nexys_video: add usb_fifo pins.
2020-05-22 14:28:55 +02:00
445338e2e7
platforms/nexys_video: add specific openocd cfg (use channel 1).
2020-05-22 14:12:45 +02:00
5aeb7d85e6
targets/acorn_cle_215: fix typo in description.
2020-05-21 10:18:06 +02:00
eeba64d7b2
targets: use soc.build_name in load/flash bitstream.
2020-05-21 09:12:29 +02:00
76551dec4c
platforms/nexys_video: add sdcard pins, move clk/rst to top.
2020-05-20 13:05:18 +02:00
83457b8791
platforms/arty: add _sdcard_pmod_io.
2020-05-20 12:09:43 +02:00
8158d94ae7
targets/c10lprefkit: switch to litehyperbus.
2020-05-19 15:48:19 +02:00
587caf7584
paltforms/marblemini: add break_off_pmod.
2020-05-19 15:42:53 +02:00
c2cd863658
platforms/ecp5_evn: rename spiflash1x to spiflash, rewrite hardware/configuration description and remove make_spiflash.
...
The Platform file should not contain import code related to cores, this has to be done in the target.
2020-05-19 15:29:25 +02:00
3f0f12011b
Merge pull request #70 from ilya-epifanov/ecp5-evn-spi1x-and-flash-params
...
ECP5-EVN SpiFlash parameters
2020-05-19 15:16:25 +02:00
b9ee3a797a
alveo_u250: re-organize the auto-generated IOs, add build/load parameters.
2020-05-16 11:47:14 +02:00
c0b7afc739
targets/alveo_u250: +x.
2020-05-16 11:13:01 +02:00
67d2a4940e
tools/extract_xdc_pins: +x.
2020-05-16 11:12:46 +02:00
482d7a6b95
targets/pcie: use 128-bit datapath and 8 max_pending_requests on pcie_x4 configurations.
2020-05-14 15:34:00 +02:00
2bb7fce5e3
targets/acorn_cle_215: add minimal instructions to reproduce the results.
2020-05-13 17:55:52 +02:00
6757c4e298
Merge pull request #71 from daveshah1/alveo_u250
...
[WIP] Add Alveo U250 platform and target
2020-05-13 09:10:22 +02:00
c7404e356f
targets/acorn_cle_215: switch to MT41K512M16 (Acorn has a 1GB DDR3 vs 512MB on NiteFury).
2020-05-09 16:39:17 +02:00
d05b10fd76
target/camlink_4k: add missing import.
2020-05-09 12:27:07 +02:00
4faa91c7f2
platforms/marblemini: review/cleanup.
...
- add copyrights.
- add link to documentation.
- reindent code.
- rename some IOs (for consistency with the others platforms).
- add pullup on clk20_vcxo_en.
- set clk20_vcxo as default clock.
- remove ununnecessary eth constraints. (we are using IO primitives).
- move PMODS to connectors (for consistency with others platforms).
2020-05-09 10:16:42 +02:00
4ffdcb5ea9
Merge pull request #75 from jersey99/marblemini
...
Marblemini [https://github.com/berkeleylab/marble-mini/ ]
2020-05-09 09:39:40 +02:00
e4ccfcfad1
platforms/marblemini.py: Cleanup. Add openocd for programming marblemini
2020-05-08 17:20:14 -07:00
6f22f082ff
targets: add LedChaser on platforms with user_leds.
...
Default to Chaser mode and similar user interface than GPIOOut.
2020-05-08 22:16:13 +02:00
b9a0f2363c
Merge pull request #74 from tommythorn/master
...
targets/orangecrab.py: propagate command arguments
2020-05-08 07:28:05 +02:00
a7d6de78ae
Merge branch 'master' into marblemini
2020-05-07 12:19:47 -07:00
5f7f087cba
community/platforms/marblemini.py: Added marblemini from https://github.com/berkeleylab/marble-mini/
2020-05-07 12:17:42 -07:00
19b12fd984
targets/panol_logic_g2: replace with a minimal target.
2020-05-07 16:36:04 +02:00
99c04358bf
platforms/pano_logic_g2: simplify/cleanup.
2020-05-07 16:35:34 +02:00
6b5492a707
pano_logic_g2: add copyrights.
2020-05-07 15:24:03 +02:00
6ddd859309
add pano_logic_g2 from litex-buildenv.
2020-05-07 15:22:22 +02:00
27c242b2ca
targets/pcie: switch to PCIe X4 on all boards that support it.
2020-05-07 12:18:39 +02:00
f9939532b6
targets/pcie: update LitePCIe constraints.
2020-05-07 12:15:52 +02:00
6335717eca
targets/orangecrab.py: propagate command arguments
...
The parsed args are stripped off by soc_core_argdict() (called from
soc_sdram_argdict() so we have to pass them explicitly (or pass the
original "args", but this mimics the rest of the code in the repo).
This fixes #72
2020-05-06 18:24:11 -07:00
d34c3baf15
prog: use different openocd config files for FT232/FT2232.
2020-05-06 16:14:51 +02:00
117d1a1c75
prog: add colorlight_5a_75b openocd config.
2020-05-06 16:01:59 +02:00
e500d90bcc
platforms/ecpix5: set pullups on rx_data to advertise as RGMII mode.
2020-05-06 16:00:46 +02:00
59e8c2cd30
acorn_cle_215: add .bin generation and --flash argument, working on hardware :).
2020-05-06 12:27:07 +02:00
a049fa6856
add Acorn CLE 215+ platform/target.
2020-05-06 07:53:55 +02:00
da61aabc5b
targets: remove USDDRPHY_DEBUG and set cmd_latency to on all Kintex7/Ultrascale targets.
2020-05-05 16:32:10 +02:00
b58b9b9e6a
platforms: fix CI.
2020-05-05 16:01:43 +02:00
2d9543b65e
targets: add build/load parameters on all targets.
2020-05-05 15:11:47 +02:00
19eb5708de
platforms: make sure all traditional platforms have a create_programmer method.
2020-05-05 13:34:57 +02:00
84468c2a63
targets/CRG: platforms are now automatically constraining the input clocks.
2020-05-05 11:51:57 +02:00
1f88a9d5ec
platforms: make sure clocks inputs are constraints on all platforms.
...
Also use new loose lookup_request to simplify constraints.
2020-05-05 11:45:41 +02:00
86648ec7d8
platforms/vcu118: rename ddram_second_channel to ddram:1.
2020-05-05 09:54:11 +02:00
e1820c7831
platforms/ac701: indent HPC.
2020-05-05 09:49:59 +02:00
2129b67779
platforms: make sure all plarforms have separators.
2020-05-05 09:47:55 +02:00
ea0eda9f75
platforms: make sure all Xilinx/Altera platforms have a create_programmer method, use OpenOCD on Spartan6 and 7-Series.
2020-05-05 09:42:34 +02:00
588bbac719
add prog directory with some Xilinx OpenOCD configurations files.
2020-05-05 09:11:06 +02:00
78b5727774
targets: rename usb_cdc to usb_acm.
...
As discussed recently on Discord.
2020-04-30 21:48:10 +02:00
088cceca8b
Add Alveo U250 platform and target
...
Signed-off-by: David Shah <dave@ds0.me>
2020-04-29 12:31:16 +01:00
0ba8045789
Added spiflash1x pins, a method to create an SpiFlash instance and a note on a second UART channel of FT2232H
2020-04-28 21:56:33 +02:00
2213d73b89
targets/kcu105: use cmd_latency=1.
2020-04-25 12:13:49 +02:00
a8a42c55c9
targets/kc705: manual DDRPHY_CMD_DELAY adjustment no longer needed.
2020-04-25 11:08:05 +02:00
865b01ec75
ecpix5: add ethernet.
2020-04-22 20:21:59 +02:00
6fe4c4ea62
ecpix5: add DDR3 (working)
2020-04-22 17:03:22 +02:00
efb13bc118
add mininal ECPIX-5 board support (Clk/Rst/Leds/UART), BIOS working.
2020-04-22 16:31:07 +02:00
4154bdf034
targets/PCIe: add PCIe software reset.
2020-04-20 12:30:09 +02:00
4ad6042e07
platforms/de0nano: swap serial tx/rx to ease use of cheap FT232 based cables.
2020-04-18 11:36:18 +02:00
4185a019f5
targets: manual define of the SDRAM PHY is no longer needed.
2020-04-16 11:25:59 +02:00
cb95962850
targets/ulx3s and colorlight_5a_75b: cleanup USB ACM addition and only keep USB ACM changes.
...
- remove update in loading/flashing: we need to thinks how to integrate this.
- remove specific README: documentation is moved to the files, link to more complete project can
be added if maintained externally, as done for the iCEBreaker for example.
- revert default freq on ULX3S to 50MHz and instantiate a second PLL as done on the colorlight.
2020-04-14 16:14:18 +02:00
f79a010a29
Addition of flash for colorlight board
2020-04-14 14:37:56 +01:00
389e8aa13a
Addition of USB ACM for ECP5
2020-04-14 13:53:46 +01:00
a12faae0fb
targets/colorlight_5a_75b: increase sys_ps phase (fixes memtest).
2020-04-14 11:24:16 +02:00
52c9648176
arty_s7: fix copyrights, rename to arty_s7, various minor changes to make it similar to others targets.
2020-04-13 15:20:36 +02:00
bbb1ded9f8
Added Arty S7 board
...
As the pin-out is totally different from the A7 board I did put this
in a separate class and not as a variant of the Arty board.
Used migen Arty S7 board file and Digilent xdc file as reference.
2020-04-12 21:48:25 +02:00
188d4a45d6
targets: use DDROutput on sdram_clock and similar configuration for all SDRAM targets.
2020-04-10 14:43:04 +02:00
ca197af2be
targets/simple: use CRG from litex.build.
2020-04-10 10:26:19 +02:00
b8a648d499
litex.build: update from migen.genlib.io litex.build.io.
2020-04-10 09:23:33 +02:00
4d7135f167
platforms/versa_ecp5: remove LatticeProgrammer (no longer used since we can now use OpenOCD).
2020-04-09 23:06:57 +02:00
2cf3c3e845
platforms: cosmetic cleanups.
2020-04-09 23:05:13 +02:00
df5de8816d
platforms/ulx3s: cleanup, fix user_leds, add PULLMODE/DRIVE constraints on SDRAM.
2020-04-09 18:53:06 +02:00
467b14a0ad
colorlight_5a_75b: minor comment changes.
2020-04-09 08:14:17 +02:00
15a27d40fa
targets/colorlight_5a_75b: Change baudrate to work on v6.1
...
There seems to be some capacitance on KEY+, so the usual 115200 don't work
2020-04-09 05:08:23 +02:00
4fc9df8414
colorlight_5a_75b/v6.1: Add eth_clock & serial pins
2020-04-09 05:06:08 +02:00
4ddde31429
colorlight_5a_75b/v6.1: Fix bank activate pin
2020-04-09 05:05:29 +02:00
9b3f16af1e
Merge pull request #62 from ilya-epifanov/ecp5-evn-button1-and-spi-flash-ios
...
ECP5-EVN board: Added BUTTON_1 and SPI flash pins to IOs
2020-04-08 09:00:12 +02:00
db67dff0ea
targets/de10lite: use Max10PLL, remove 50MHz limitation.
2020-04-08 08:55:30 +02:00
8ccab03358
targets/c10lprefkit: use Cyclone10LPPLL, remove 50MHz limitation.
2020-04-08 08:34:59 +02:00
4cdc121327
targets/de10nano: use CycloneVPLL, remove 50MHz limitation.
2020-04-08 08:11:04 +02:00
2d8a4ef9ec
targets/de1_soc: use CycloneVPLL, remove 50MHz limitation.
2020-04-08 08:07:37 +02:00
cec4cbb6dc
targets/de2_115: use CycloneIVPLL, remove 50MHz limitation.
2020-04-08 08:03:41 +02:00
1fac6077fb
targets/de0nano: use CycloneIVPLL, remove 50MHz limitation.
2020-04-07 17:01:58 +02:00
5f629c203b
targets/vcu118: fix clk500 typo.
2020-04-07 13:53:22 +02:00
a7fbe0a724
colorlight_5a_75b: add SoC with regular UART (on J19).
2020-04-03 10:28:53 +02:00
19e5366ad1
targets/colorlight_5a_75b: update sys/sys_ps phases.
2020-03-31 18:18:45 +02:00
9ae8a0cc11
colorlight_5a_75b/v7.0: add spiflash pins.
2020-03-31 16:18:12 +02:00
a43072ac40
ECP5-EVN board: Added BUTTON_1 and SPI flash pins to IOs
2020-03-28 13:08:46 +01:00
ccfc021c1a
Merge pull request #61 from ilya-epifanov/ecp5-evn-programming
...
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 12:59:19 +01:00
8afc9a5b03
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 11:27:34 +01:00
89dd00d3a2
platforms/aller: rename pcie to pcie_x4 (for consistency with others platforms).
2020-03-27 13:01:36 +01:00
d2edf54ab3
zcu104: add fully working SO-DIMM config
2020-03-26 16:37:11 +01:00
3b91e96c42
targets/add_constant: avoid specifying value when value is None (=default)
2020-03-26 09:47:22 +01:00
555bf6c4dc
targets/Ultrascale(+): enable USDDRPHY_DEBUG.
2020-03-26 09:17:09 +01:00
4053c02d7e
targets/orangecrab: add USB PLL for USB CDC with ValentyUSB.
2020-03-25 19:38:36 +01:00
85f38876c2
targets: update PCIe on Numato targets.
...
Should be compatible with software from: https://github.com/enjoy-digital/netv2 .
2020-03-25 11:53:52 +01:00
6e6b6dac55
platforms/orangecrab: add spisdcard pins.
2020-03-25 10:21:57 +01:00
87fd4dc059
platforms/minispartan6: add spisdcard pins.
2020-03-25 09:53:04 +01:00
24033e331c
targets: update SDRAM to use new GENSDRPHY and new ECP5PLL phase support.
2020-03-24 19:59:42 +01:00
92f793f9c5
platforms: remove versa_ecp3 (ECP3 no longer supported).
2020-03-24 19:58:12 +01:00
eb35ec92ba
orangecrab: combine revisions in target
2020-03-23 09:20:01 +10:30
159360da2c
orangecrab: Add r0.2 support
2020-03-22 21:04:07 +10:30
bf3c9dc9bf
orangecrab: Add sdram selection option
2020-03-22 20:41:12 +10:30
88d3f1d63e
orangecrab: r0.1 OrangeCrab fixes
2020-03-22 20:14:29 +10:30
78224b1e56
targets/colorlight_5a_75b: add SDRAM.
2020-03-21 22:11:47 +01:00
a95a4eed3f
targets/colorlight_5a_75b: switch to add_ethernet/add_etherbone methods.
2020-03-21 21:50:05 +01:00
7bba5caab0
targets/c10prefkit: remove keep attributes (no longer needed, added automatically).
2020-03-21 21:44:44 +01:00
6c31933e89
targets: switch to add_etherbone method.
2020-03-21 21:40:45 +01:00
159386e3d3
targets: always use sys_clk_freq on SDRAM modules.
2020-03-21 20:00:56 +01:00
3fb3ba18e8
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-21 18:29:52 +01:00
83e6fb29f8
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-21 12:43:39 +01:00
33bf1d3ee2
Merge pull request #58 from gsomlo/gls-trellisboard-spisdcard
...
Move trellisboard target to SoCCore, add SPI-mode SDCard support
2020-03-20 19:07:00 +01:00
fb1cab857a
targets/arty: use new ISERDESE2 MEMORY mode.
2020-03-20 18:59:17 +01:00
f021c1de5f
targets/trellisboard: add '--with-spi-sdcard' build option
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-20 07:14:13 -04:00
69a78c8c66
targets/trellisboard: switch to SoCCore, use add_ethernet() method
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
396b0383c8
platforms/trellisboard: fix "sdcard" pads, add "spisdcard" pads
...
Add support for SPI-mode SDCard interface. Also, add pull-up and
slew constraints to the standard sdcard interface.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
d0d047dfa4
platforms/ulx3s: add spisdcard pins.
2020-03-19 15:14:05 +01:00
6ab13a0661
de10nano/MiSTer: rename SPI SD CARD pins to spisdcard and remove SPI SD Card integration from target.
2020-03-19 11:09:48 +01:00
db9d5489ec
Merge pull request #56 from rob-ng15/master
...
de10nano add in support for MiSTer secondary sd card
2020-03-19 11:07:40 +01:00
57bcadb5b4
platforms/nexys4ddr: add spisdcard pins.
2020-03-19 11:04:11 +01:00
f3d7f5880f
platforms/kcu105: fix pcie tx0 p/n swap.
2020-03-18 19:09:52 +01:00
bc6ef0bc48
Allow access to secondary sd card via hardware spi bitbanging
2020-03-18 12:13:37 +00:00
a6f80694cb
Add in support for secondary sd card via spi hardware bitbanging
2020-03-18 12:11:57 +00:00
a99d258411
targets/icebreaker: use simplified version closer to the others targets.
...
Add description of the board, link to the crowdsupply campaign and to the more complete example.
2020-03-13 09:43:43 +01:00
74a5ffb9ef
targets/Ultrascale+: use 500MHz IDELAYCTRL reference clock.
...
The minimum is 300MHz on Ultrascale+ vs 200MHz on Ultrascale.
2020-03-10 16:58:30 +01:00
e2a66090ee
targets/Ultrascale(+): simplify CRG using USIDELAYCTRL.
2020-03-10 16:55:22 +01:00
cf58550bba
targets/Ultrascale+: use USPDDRPHY.
2020-03-10 16:06:48 +01:00
ce922613a7
Merge pull request #55 from antmicro/jboc/mercury-xu5
...
platforms/mercury_xu5: fix sdram timing issues
2020-03-10 15:30:12 +01:00
90de99eb46
platforms/mercury_xu5: fix sdram timing issues
2020-03-10 15:03:31 +01:00
75286f8a9b
platforms/zcu104: add missing INTERNAL_VREF on bank 64 (DQ0-31)
2020-03-10 14:57:39 +01:00
95e1a05bf1
platforms/Ultrascale: avoid unnecessary {{}} on INTERNAL_VREF.
2020-03-09 09:29:49 +01:00
3f191c8561
mercury_xu5: set INTERNAL_VREF to 0.84. (similar to others Ultrascale boards with DDR4).
2020-03-09 09:28:25 +01:00
f4ae21a7a2
zcu104: fix copyrights.
2020-03-09 09:24:06 +01:00
5031c11d57
mercury_xu5: add missing copyrights.
2020-03-09 09:23:08 +01:00
8c535d15f2
platforms/mercury_xu5: replace ' with ".
2020-03-09 09:21:27 +01:00
dc1371108d
Merge pull request #52 from antmicro/jboc/mercury-xu5
...
add Enclustra Mercury XU5 board
2020-03-09 09:11:15 +01:00
2b1b9684de
targets/icebreaker: simplify CRG, just use a 12MHz sys_clk and por_clk for reset.
2020-03-07 18:25:26 +01:00
9416ddd84a
targets/icebreaker: simplify arguments and make it closer to others targets.
2020-03-07 18:13:02 +01:00
992f7066fa
targets/icebreaker: simplify leds.
2020-03-07 18:12:59 +01:00
682316214c
targets/icebreaker: use specific method to set Yosys/Nextpnr settings. Rename argument to nextpnr-xxyy.
2020-03-07 18:12:52 +01:00
f777d4b08c
targets/icebreaker: +x
2020-03-05 23:11:35 +01:00
6f517ad1d6
targets/ecp5: make sure all BaseSoC/EthernetSoc default to trellis.
2020-03-05 10:57:59 +01:00
d002059e0b
add Enclustra Mercury XU5 board
2020-03-05 10:52:32 +01:00
745c99ba14
icebreaker: Updated to build on newer litex. Disabled bios building.
2020-03-05 00:12:18 -08:00
3ac9d927a9
targets: icebreaker: Minor style fixes.
2020-03-05 00:12:18 -08:00
738967176c
targets: icebreaker: set the boot address to point to SPI flash
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
093e4913c4
targets: icebreaker: hack to get boot working
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
77b780eb4b
targets: icebreaker: switch to single SPI
...
The Icebreaker doesn't have the QE/ bit set in config, so default to
using single SPI.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
e6dcdc31ed
targets: icebreaker: fix cpu and add spi flash
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
0185095782
targets: icebreaker: fix argument parsing for cpu
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
f0dd31f6c8
target: targets: add crg and begin getting it working
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
ce9b67e2ee
Added icebreaker platform and target.
...
Target is heavily based on Fomu.
2020-03-05 00:12:18 -08:00
7b4ca20ff4
platforms.colorlight_5a_75b: add J1-J8 connectors
2020-02-28 06:09:44 -08:00
be5ed35871
targets: default to trellis toolchain on all ECP5 targets (now able to build all supported targets).
2020-02-28 09:46:54 +01:00
b44885d222
vc707: fix copyrights (Michael Betz is the initial author)
2020-02-28 08:39:52 +01:00
b89af28a05
targets/kc705: use DDRPHY_CMD_DELAY to center write leveling.
2020-02-27 12:58:52 +01:00
aaa10c69eb
platforms/colorlight_5a_75b: add default_clk_name/period
2020-02-27 11:16:49 +01:00
d8de4fbdfb
platforms/targets: keep in sync with LiteX
2020-02-27 11:06:53 +01:00
18f65a7f9d
platforms/kc705: cleanup ddram.
2020-02-27 11:06:35 +01:00
d4460c11a5
platforms/kcu105/vcu118: remove PRE_EMPHASIS/EQUALIZATION on dm.
2020-02-27 10:43:41 +01:00
58f588f69e
platforms/zcu104/ddram: add PRE_EMPHASIS/EQUALIZATION settings
2020-02-27 10:43:01 +01:00
d87b8b3c66
zcu104: add separate ddram_32/64 definitions and use ddram_32 for now.
...
Ease switching between ddram_32 and ddram_64.
2020-02-27 10:05:17 +01:00
8ecfb13f3c
zcu104: add copyrights
2020-02-27 09:57:26 +01:00
22b0449509
Merge pull request #47 from antmicro/zcu104
...
Add support for ZCU104 board
2020-02-27 09:51:54 +01:00
608541d5b8
add ZCU104 board
2020-02-26 13:53:21 +01:00
e516ff3452
vcu118/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:51 +01:00
9d2ca50c5f
kcu105/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:35 +01:00
83d2c71099
platforms/vcu118: add missing Internal Vref configuration on DDR4 C1/C2 banks
2020-02-25 18:32:42 +01:00
4a84e9b08a
targets/colorlight_5a_75b: add instruction to build/load and use bitstream with wishbone-tool
2020-02-25 12:47:08 +01:00
f279fe9d33
vc707: cleanup platform/targets, remove Ethernet support (no Ethernet pads defined)
2020-02-25 10:35:18 +01:00
3581df5af6
vc707: cleanup platform/targets, remove Ethernet support (SGMII is not currently supported)
2020-02-25 09:41:53 +01:00
88a1f80db1
vc707/vcu118: use proper copyrights
2020-02-25 09:03:52 +01:00
373e74f435
add new board files for VC707 and VCU118, only specified limited ports for VCU118, including clock, reset and DDR4
2020-02-24 14:20:47 -05:00
2cf4e084ec
platforms/colorlight_5a_75b.py: fix sdram_clock and sdram a pins
2020-02-23 10:01:41 +01:00
f72e7bd314
Merge pull request #41 from lromor/fix-wrong-import
...
Changed wrong imports for fomu board.
2020-02-12 18:48:13 +07:00
ec30cc05c3
Changed wrong imports for fomu board.
2020-02-12 12:40:07 +01:00
c94360c2e0
targets: avoid direct use of mem_decoder.
2020-02-11 21:59:42 +01:00
4edf196911
targets/EthernetSoC: be sure memory region is added before adding Wishbone Slave (required by new SoC)
2020-02-11 17:45:35 +01:00
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00
7a24406b2e
targets: fomu: fix compatibility for when a cpu is added
...
Things weren't quite right for adding a CPU. This fixes that by
correcting the placer arguments, memory map, and USB type.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-02-03 08:58:54 +08:00
0627f55dca
de10nano: cleanup a bit, rename SDRAMSoC to MiSTerSDRAMSoC and argument to --with-mister-sdram to make it clear that it's using the MiSTer SDRAM extension board.
2020-01-31 09:29:02 +01:00
cf9a9ff91b
de10nano: update copyrights, remove trailing whitespaces
2020-01-31 09:13:36 +01:00
36e1f1fe75
rename sw to user_sw
2020-01-30 05:01:46 -08:00
1631b071c3
finish up sdram, passes memtest
2020-01-30 03:41:44 -08:00
5091a1b40a
WIP sdram module option
2020-01-29 13:59:57 -08:00
3a6a9258ce
add de10 nano board
...
add iostandard to hdmi
2020-01-29 00:21:51 -08:00
2ec6bc0bdc
colorlight_5a_75b: add disclaimer
2020-01-23 14:13:13 +01:00
55c0b781e4
colorlight_5a_75b: revert rx_delay to 2ns, improve comment (thanks @tnt)
2020-01-23 13:16:36 +01:00
4fb89fc9c5
colorlight_5a_75b: set RGMII tx/rx_delay to 0ns in the FPGA (added by PCB/PHY)
2020-01-23 09:39:48 +01:00
dcc65b347d
targets/colorlight_5a_75b: switch to SoCCore, CPU and Etherbone working :)
...
Tested with:
./colorlight_5a_75b.py --cpu-type=picorv32 --uart-name=crossover --with-etherbone --csr-csv=csr.csv
Load with following script:
#!/usr/bin/env python3
# Load ---------------------------------------------------------------------------------------------
def load():
import os
f = open("openocd.cfg", "w")
f.write(
"""
interface ftdi
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0098 0x008b
reset_config none
adapter_khz 25000
jtag newtap ecp5 tap -irlen 8 -expected-id 0x41111043
""")
f.close()
os.system("openocd -f openocd.cfg -c \"transport select jtag; init; svf soc_etherbonesoc_colorlight_5a_75b/gateware/top.svf; exit\"")
exit()
if __name__ == "__main__":
load()
Then start lxserver:
lxserver --udp
And run following script:
#!/usr/bin/env python3
import sys
from litex import RemoteClient
wb = RemoteClient()
wb.open()
# # #
while True:
if wb.regs.uart_xover_rxempty.read() == 0:
print(chr(wb.regs.uart_xover_rxtx.read()), end="")
sys.stdout.flush()
# # #
wb.close()
2020-01-22 15:57:52 +01:00
c07e4a6b3a
colorlight_5a_75b: fix rst_n
2020-01-22 14:57:48 +01:00
8da8ed7a0e
colorlight_5a_75b/v7.0: update eth_clocks/rx pinout, remove FIXME
2020-01-22 14:56:17 +01:00
bb805999cb
platforms/colorlight_5a_75b: fix 6.1 used_led_n/user_btn_n thanks @smunaut
2020-01-22 12:43:37 +01:00
43badd162e
colorlight_5a_75b/v6.1: add led/btn and remove FIXME on sdram now that clarified
2020-01-22 11:05:08 +01:00
1d9e349093
partner: add colorlight_5a_75b initial support
2020-01-22 09:51:00 +01:00
07067301d5
targets/linsn_rv901t: cleanup arguments
2020-01-22 09:04:28 +01:00
8113b491db
aller/nereid/tagus: update litepcie
2020-01-21 21:26:23 +01:00
684c1640bb
add Linsn RV901T support
2020-01-18 21:40:04 +01:00
0e4569a48a
platforms/camlink_4k: remove #!/usr/bin/env python3
2020-01-18 21:35:18 +01:00
e72cd1468c
platforms/ac701: fix eth indent
2020-01-18 21:34:50 +01:00
908539d49f
targets/nexys4ddr: fix typo
2020-01-17 13:15:22 +01:00
bb99a8dd0c
targets/kcu105: remove main_ram_size_limit
2020-01-17 12:09:53 +01:00
eca9bf10ae
mimas_v7: cleanup, make it similar to others boards
2020-01-16 11:24:09 +01:00
54f39b600a
mimas_a7: fix copyrights
2020-01-16 11:02:11 +01:00
8d298951a8
Merge pull request #37 from feliks-montez/master
...
Add Mimas A7 board support
2020-01-16 11:00:32 +01:00
f9619c4a8f
aller/tagus/nereid: use crossover UART, rename SoC to PCIe SoC and pass soc_sdram_argdict to PCIeSoC
2020-01-16 10:51:35 +01:00
fd1e655700
targets: cleanup EthernetSoC
2020-01-16 10:28:09 +01:00
206ec34551
platforms/mimas_a7: add support
2020-01-14 23:31:03 -05:00
9f1c3305b6
targets/mimas_a7: add support
2020-01-14 23:30:49 -05:00
50d550c911
kx2: cleanup, fix copyright
2020-01-13 17:22:33 +01:00
3811b58f32
Merge pull request #36 from Marrkson/master
...
ADD: KX2 and DDR3 support
2020-01-13 17:07:16 +01:00
c109b36fb9
travis: update/fix
2020-01-13 17:00:01 +01:00
028d4a78aa
targets: use default integrated rom/ram size passed with **kwargs from default soc_core_args
2020-01-13 15:20:37 +01:00
13e5ca03a5
ADD: KX2 and DDR3 support
2020-01-13 14:21:54 +01:00
beccf670e5
hadbadge: fix _CRG
2020-01-11 10:46:23 +01:00
15f3457aea
platforms/de0nano/serial: add gpio names in comment
2020-01-10 18:53:52 +01:00
94ba343daf
targets/ac701: cpu_reset is active high
2020-01-10 18:53:14 +01:00
ab01f70e5c
platforms/ac701: set internal vref to 0.750v on DDR3 banks, use IN_TERM=UNTUNED_SPLIT_50 on dq
2020-01-09 21:56:01 +01:00
7afe3dc674
platforms/targets: sync with litex
2020-01-09 21:10:59 +01:00
4192b20f09
targets: cleanup Altera CRGs
2020-01-09 19:46:39 +01:00
9e9fc5ef78
platforms: always use 1e9/clk_freq for default_clk_period
2020-01-09 19:28:50 +01:00
fe23881348
Merge pull request #33 from msloniewski/master
...
targets/de10lite: use external clock for sys directly
2020-01-09 19:23:55 +01:00
aaf8d54c6a
targets/de10lite: use AsyncResetSynchronizer for clock domains
...
At the start output of the pll is not stabilized, which
caused malfunctions when used for sys clock domain.
Use AsyncResetSynchronizer to start clock domains
on pll locked signal.
2020-01-09 18:47:13 +01:00
d08dfdb808
platforms/nexys4ddr: add sdcard pins (sync w. litex commit #e99740e8)
2020-01-09 09:25:19 -05:00
babbc676eb
targets: cleanup ECP5 CRGs
2020-01-09 14:24:18 +01:00
82601ff700
hadbadge: remove speed_grade workaround, now passed to trellis from device.
2020-01-08 19:44:35 +01:00
1f300bb03e
add initial camlink_4k support
2020-01-08 09:56:37 +01:00
c0e4578bea
targets/hadbadge: cleanup/simplify (keep things similar to ulx3s) and add copyrights
2020-01-07 10:29:58 +01:00
85c4f76eba
platform/hadbadge: cleanup/simplify and add copyrights
2020-01-07 10:29:01 +01:00
829898d652
Merge pull request #31 from pdp7/master
...
add the Hackaday Supercon ECP5 badge
2020-01-07 09:48:15 +01:00
ab41cf5b79
Update ecp5_evn.py
2020-01-07 01:55:59 +01:00
b3f175c064
add the Hackaday Supercon ECP5 badge
...
Add the Hackaday Supercon 2019 badge which has an ECP5 FPGA:
https://hackaday.io/project/167255-2019-hackaday-superconference-badge
These changes are from Michael Welling's fork:
https://github.com/mwelling/linux-on-litex-vexriscv
During Supercon, we trying two approaches:
- use the built-in 16MB QSPI SRAM
- use add-on cartiridge with 32MB SDRAM by Jacob Creedon
We were not able to get the QSPI SRAM working so I've removed
those changes, and I have just added the changes that are needed
to boot Linux with the 32MB SDRAM.
Thanks to Jacob Creedon, Greg Davill and Tim Ansell who helped debug.
KiCad design files for the SDRAM cartridge are available at:
https://github.com/jcreedon/dram-cart/
The SDRAM cartridge PCB is shared at:
https://oshpark.com/shared_projects/IQSl2lid
More information in this blog post:
https://blog.oshpark.com/2019/12/20/
The Hackaday Supercon badge PCB design is here:
https://github.com/Spritetm/hadbadge2019_pcb
2020-01-06 16:59:15 +01:00
f8f2301a3e
Merge pull request #30 from mithro/fomu-update
...
Updating the templates for Fomu.
2020-01-03 08:40:18 +00:00
250706b98c
Updating the templates for Fomu.
2020-01-02 13:55:09 +00:00
2b43a18a3c
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:18:56 +01:00
c96e7c8fb9
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:07:18 +01:00
2259042383
pipistrello: add copyrights
2019-12-31 17:44:24 +01:00
6324433e1c
Merge pull request #28 from zakgi/master
...
Adding initial support for Saanlima's Pipistrello LX45 board
2019-12-31 17:33:25 +01:00
980b0ebda0
targets/de10lite: rename VideoSoC to VGASoC (to avoid confusion with VideoSoC as used on Video designs with framebuffer)
2019-12-31 17:30:23 +01:00
Florent Kermarrec
David Shah
YanekJ
Bryan Jacobs
Konrad Beckmann
Michael Betz
Pepijn de Vos
Geert Uytterhoeven
DerFetzer
Piense
connorwk
Pawel Sagan
rob-ng15
Jędrzej Boczar
Vamsi K Vytla
Greg Davill
Owen Kirby
Kamil Rakoczy
Raptor Engineering Development Team
Vadim Kaushan
Gabriel Somlo
Skip Hansen
Vamsi K Vytla
Tommy Thorn
Ilya Epifanov
Dave Marples
Staf Verhaegen
David Sawatzke
Piotr Binkowski
Piotr Esden-Tempski
Sean Cross
Tom Keddie
Fei Gao
Gwenhael Goavec-Merou
Leonardo Romor
Paul Sajna
Feliks
Mark
Marcin Sloniewski
Arnaud Durand
Drew Fustini
Tim Ansell