3e8b6677e9
platforms: Make sure all platforms have a default Clk. (To be able to run simple target).
2021-07-28 12:03:06 +02:00
4e2b596ab3
digilent_arty/qmtech_xc7a35t: Rename --with-mapped-flash to --with-spi-flash.
2021-07-28 11:21:51 +02:00
fa3cc9b753
kosagi_fomu/spiflash: Switch to READ_1_1_4.
2021-07-28 11:10:34 +02:00
1118b09350
trenz_tec0117: Switch to LiteSPI.
2021-07-28 10:34:17 +02:00
9065cfa75d
kosagi_fomu: Switch to LiteSPI.
2021-07-27 19:55:04 +02:00
b3e7dbfd30
qmtech_xc7a35t: LiteSPI integration now provided by LiteX.
2021-07-27 19:39:50 +02:00
55ba0591df
targets: Remove SpiFlash imports (Obsolete since integration is provided by LiteX).
2021-07-27 19:35:19 +02:00
1c52e6b8fb
targets/digilent_arty/spiflash: LiteSPI integration now provided by LiteX.
2021-07-27 19:30:38 +02:00
15b5aec23f
1bitsquared_icebreaker_bitsy: Also switch to LiteSPI.
2021-07-27 19:27:28 +02:00
959780f372
1bitsquared_icebreaker: Switch to LiteSPI (with integration now done by LiteX).
...
Keep the old add_spi_flash call commented for now just in case we need to compare/test it.
2021-07-27 19:23:26 +02:00
533d25e845
1bitsquared_icebreaker: Enable LiteSPI Master but reduce FIFO depth to reduce resource usage.
...
Already better regarding resource usage:
Info: ICESTORM_LC: 2938/ 5280 55%
Info: ICESTORM_RAM: 2/ 30 6%
Info: SB_IO: 15/ 96 15%
Info: SB_GB: 8/ 8 100%
Info: ICESTORM_PLL: 1/ 1 100%
Info: SB_WARMBOOT: 0/ 1 0%
Info: ICESTORM_DSP: 0/ 8 0%
Info: ICESTORM_HFOSC: 0/ 1 0%
Info: ICESTORM_LFOSC: 0/ 1 0%
Info: SB_I2C: 0/ 2 0%
Info: SB_SPI: 0/ 2 0%
Info: IO_I3C: 0/ 2 0%
Info: SB_LEDDA_IP: 0/ 1 0%
Info: SB_RGBA_DRV: 0/ 1 0%
Info: ICESTORM_SPRAM: 4/ 4 100%
2021-07-27 17:38:25 +02:00
12fb315e09
1bitsquared_icebreaker: Disable LiteSPI Master.
...
Requires 80e9d2cea9
2021-07-27 17:00:55 +02:00
0f648ac4ef
1bitsquared_icebreaker: Add test code to use LiteSPI.
...
Both XiP from SPI(1X) or QSPI(4X) are working, but resource usage is currently
too high to be able to switch to it by default. We'll first try to reduce it.
Resource usage using SPI(1X) and actual LiteX SPI Flash core:
Info: Device utilisation:
Info: ICESTORM_LC: 2016/ 5280 38%
Info: ICESTORM_RAM: 2/ 30 6%
Info: SB_IO: 15/ 96 15%
Info: SB_GB: 8/ 8 100%
Info: ICESTORM_PLL: 1/ 1 100%
Info: SB_WARMBOOT: 0/ 1 0%
Info: ICESTORM_DSP: 0/ 8 0%
Info: ICESTORM_HFOSC: 0/ 1 0%
Info: ICESTORM_LFOSC: 0/ 1 0%
Info: SB_I2C: 0/ 2 0%
Info: SB_SPI: 0/ 2 0%
Info: IO_I3C: 0/ 2 0%
Info: SB_LEDDA_IP: 0/ 1 0%
Info: SB_RGBA_DRV: 0/ 1 0%
Info: ICESTORM_SPRAM: 4/ 4 100%
Resource usage using LiteSPI:
Info: Device utilisation:
Info: ICESTORM_LC: 3964/ 5280 75%
Info: ICESTORM_RAM: 2/ 30 6%
Info: SB_IO: 15/ 96 15%
Info: SB_GB: 8/ 8 100%
Info: ICESTORM_PLL: 1/ 1 100%
Info: SB_WARMBOOT: 0/ 1 0%
Info: ICESTORM_DSP: 0/ 8 0%
Info: ICESTORM_HFOSC: 0/ 1 0%
Info: ICESTORM_LFOSC: 0/ 1 0%
Info: SB_I2C: 0/ 2 0%
Info: SB_SPI: 0/ 2 0%
Info: IO_I3C: 0/ 2 0%
Info: SB_LEDDA_IP: 0/ 1 0%
Info: SB_RGBA_DRV: 0/ 1 0%
Info: ICESTORM_SPRAM: 4/ 4 100%
2021-07-27 16:50:18 +02:00
0ca203487b
pr243: Make led_chaser optional.
2021-07-27 15:00:18 +02:00
9835bd5f93
targets/muselab_icesugar_pro: +x.
2021-07-27 14:56:33 +02:00
2df3f9e664
pr243/platforms: Consistency with other platforms.
2021-07-27 14:55:19 +02:00
3fb73b3603
platforms/digilent_nexys4ddr: Fix INTERNAL_VREF voltage (0.900v instead of 0.750v).
2021-07-27 12:29:42 +02:00
2becaaabfc
pr243: Minor platform cleanups.
2021-07-27 12:28:04 +02:00
2418df9f2b
pr243: Add @tweakoz copyrights.
2021-07-27 12:21:23 +02:00
369d2cf49d
Merge pull request #243 from tweakoz/master
...
add FPGA Boards (Digilent CMOD A7, Digilent Nexys 4, Micronova Mercury2)
2021-07-27 12:17:04 +02:00
10bfd50e22
targets/1bitsquared_icebreaker: Revert to 128KB SPRAM.
2021-07-27 12:03:39 +02:00
4d20cfe5cd
Merge pull request #245 from racerxdl/feat/MuselabIceSugarPro
...
muselab_icesugar_pro: initial support
2021-07-23 14:34:57 +02:00
5852dbb88f
muselab_icesugar_pro: initial support
2021-07-22 11:26:27 -03:00
a3f479837c
digilent_arty: Allow exposing raw PMOD IOs (for tests with MicroPython).
2021-07-21 13:50:12 +02:00
a455713e0c
kosagi_fomu: Handle bios_flash_offset in flash function and make DFU flash offset explicit.
2021-07-21 11:41:35 +02:00
fbcecee1f8
Merge pull request #242 from tcal-x/fix-basys3-rst
...
Basys3: Invert reset button, so that the board is reset when btnc is pushed.
2021-07-20 19:47:53 +02:00
8c8e163eee
trenz_tec0117: Add SDCard (SPI and SD mode), move SPI Flash to 0x00000000 and use default l2_cache_min_data_width.
2021-07-20 17:25:51 +02:00
75cadf845f
add FPGA Boards
...
1. Digilent CMOD A7
https://reference.digilentinc.com/programmable-logic/cmod-a7/start
2. Digilent Nexys 4
https://reference.digilentinc.com/programmable-logic/nexys-4/start
3. MicroNova Mercury 2
https://www.micro-nova.com/mercury-2
2021-07-17 22:03:17 -06:00
5da2bdefb7
Invert reset button, so that board is reset when btn is pushed.
...
Signed-off-by: Tim Callahan <tcal@google.com>
2021-07-16 13:08:18 -07:00
4b48f15265
Merge pull request #236 from JosephBushagour/jbushagour_with_led_chaser
...
Add with_led_chaser argument to constructor of boards using LedChaser submodule.
2021-07-16 14:41:05 +02:00
a74b6e83f7
trenz_tec0117: Add clock constraints.
2021-07-15 11:07:05 +02:00
6648b2f907
targets/trenz_tec0117: Switch SPI Flash to QSPI mode.
2021-07-15 09:15:34 +02:00
c369f4bb7f
trenz_tec0117: Get BIOS XiP from SPI Flash working, remove CPU variant force since can now fit default VexRiscv config.
2021-07-14 12:49:03 +02:00
132feaf3e8
trenz_tec0117: Prepare for 1:2 SDRAM rate (Not yet working at 1:2 but one step closer...).
2021-07-14 10:43:26 +02:00
ba8321a3ab
trenz_tec0117: Use new DDROutput to generate SDRAM Clk.
2021-07-14 10:02:58 +02:00
94b985ac56
trenz_tec0117: Use new integrated reset from GW1NPLL.
2021-07-14 09:55:00 +02:00
6e31d12fa9
trenz_tec0117: Avoid forcing CPU type (only force to lite variant when VexRiscv is selected=default).
2021-07-13 19:39:53 +02:00
1920db3535
Add with_led_chaser argument to constructor of boards using LedChaser submodule.
2021-07-06 16:39:37 -05:00
8c1e6c6a02
decklink_quad_hdmi_recorder: Remove WIP (SoC + DDR3 now working) and add build/use instructions.
2021-07-02 15:54:57 +02:00
2dff854b7a
decklink_quad_hdmi_recorder: Enable second DDR3 module.
2021-07-02 15:52:12 +02:00
a02855d105
decklink_quad_hdmi_recorder: Increase sys_clk to 200MHz.
2021-07-02 15:07:13 +02:00
b18f6a2c7f
decklink_quad_hdmi_recorder: Enable DRAM modules 0 and 1, fix pre placement constraints.
2021-07-02 14:32:53 +02:00
548f77c79c
decklink_quad_hdmi_recorder: Add INTERNAL_VREF constraint on DRAM banks.
2021-07-02 14:32:14 +02:00
7442639a5e
targets/digilent_arty: Add default value for CRG's with_mapped_flash.
...
Otherwise break retro-compat on external design importing CRG without passing this new parameter.
2021-07-02 09:33:06 +02:00
1b65bad4c2
decklink_quad_hdmi: Add Clk IOs, use clk200 as primary clk and add JTAGBone.
2021-07-01 20:00:35 +02:00
18b2758e4e
decklink_quad_hdmi_recorder: Add other DDR3 SDRAM modules building but untested.
2021-06-30 11:50:42 +02:00
e65308ee13
decklink_quad_hdmi_recorder: Add DDR3 SDRAM (only first module), building but untested.
2021-06-30 09:40:08 +02:00
84cb5d797d
decklink_intensity_pro_4k: Add WIP.
2021-06-30 09:06:00 +02:00
7cb155fb9c
icebreaker: Minor fix to usb (add PMOD2 position and fix typo)
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-27 16:00:09 +02:00
591377cf95
decklink: Pinout fixes on itensity_pro_4k and quad_hdm_recorder.
2021-06-25 11:19:05 +02:00
ebfb4fad57
Add initial Decklink Intensity Pro 4K support (with documented PCIe / Untested).
2021-06-24 19:55:40 +02:00
5f8560bf69
Add initial Decklink Quad HDMI Recorder support (with documented PCIe/HDMI In).
...
LitePCIe Gen3 X4 enumerating correctly.
2021-06-24 19:48:31 +02:00
8ec1435e65
targets/decklink_mini_4k: Fix typos.
2021-06-24 19:13:18 +02:00
87cd56d187
targets: Add new 1bitsquared_icebreaker_bitsy target
...
Most basic SoC ever but ... it runs
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 22:11:53 +02:00
2ebcb4a726
platforms: Add new 1bitsquared_icebreaker_bitsy platform
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 16:17:54 +02:00
4c758dc0e3
platforms/1bitsquared_icebreaker: Fix wrong URL in header
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 16:16:47 +02:00
675616493c
platform/1bitsquare_icebreaker: Add possible USB pinouts
...
The pin outs come from LUNA :
https://github.com/greatscottgadgets/luna/blob/main/luna/gateware/platform/icebreaker.py#L94
and are some commonly used ones from other projects / pmods.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-20 22:25:49 +02:00
caac75c7db
trenz_max1000: Review/Cleanup.
2021-06-16 18:04:55 +02:00
8ef138eaa0
added MAX1000 board
2021-06-16 17:55:06 +02:00
fa045e6fa4
enclustra_mercury_kx2: Comment user_led2/3 (Conflicting with DRAM pins).
2021-06-16 11:54:52 +02:00
fe7b3968e4
Fix colorlight 5a 75b v6.1 flash pins
...
As with the other versions, the clk pin can't be directly driven
2021-06-06 02:59:48 +02:00
588b430a0c
Merge pull request #217 from hansfbaier/master
...
QMTech EP4CE15: Add daughterboard support, small DECA addition
2021-05-25 10:15:26 +02:00
df10fc54ad
muselab_icesugar/trenz_cyc1000: +x.
2021-05-25 08:46:33 +02:00
1c4825e7c4
basys3: Review/Simplify and fix build.
2021-05-25 08:44:26 +02:00
25867c4dcb
Merge pull request #218 from helium729/master
...
Add digilent basys3 board support
2021-05-23 19:46:58 +02:00
dd5a4bdc92
CYC1000: Add initial support of CYC1000 board
2021-05-22 21:17:27 +02:00
bf123db20b
icebreaker/fomu: Update flashing and disconnect reset from SoC (will need proper support in iCE40PLL).
2021-05-20 09:14:54 +02:00
ce5b2a74a1
add digilent basys3 support
2021-05-17 16:39:16 +08:00
f01e0c02c9
qmtech ep4ce15: Add daughterboard support, add spiflash
2021-05-15 13:16:43 +07:00
c010b9a335
Merge pull request #215 from hansfbaier/qmtech-xc7a35t
...
Qmtech xc7a35t
2021-05-10 08:31:08 +02:00
ddaab5317e
qmtech_xc7a35 set symbiflow_device, needed when using symbiflow
2021-05-08 18:01:01 +07:00
df447ddc87
QMTech XC7A35T: fix argument parser description
2021-05-08 08:49:07 +07:00
f2b51b0233
icesugar: map the usb port
2021-05-08 07:34:10 +07:00
5027b270fd
__init__.py: Add muselab to vendors.
2021-05-07 09:10:51 +02:00
e99272cb07
muselab_icesugar: Modify comments a bit.
2021-05-07 08:57:34 +02:00
5ae130661f
Merge pull request #213 from hansfbaier/icesugar
...
muselab_icesugar: first basic version which boots
2021-05-07 08:50:50 +02:00
2c2a9db3cc
Merge pull request #212 from hansfbaier/qmtech-xc7a35t
...
add QMTECH XC7A35T core board + daughter board
2021-05-07 08:32:16 +02:00
9e86c094c9
Merge pull request #211 from Acathla-fr/master
...
Lattice iCE40 UltraPlus Breakout board (iCE40UP5K-B-EVN) added
2021-05-07 08:30:01 +02:00
c2e0f6026e
muselab_icesugar: first basic version that boots
2021-05-07 11:50:28 +07:00
3bb84b0071
Add initial Blackmagic Decklink Mini 4K support (with UART, DDR3, PCIe, Video Out).
...
Mini Monitor 4K and Mini Recorder 4K are almost the same hardware with just changes on
the Video In/Out. For now tests have been done on the Mini Monitor 4K, but the aim is
support both boards in the same platform/target in the future, thus the mini_4k naming.
These boards could be used as affordable Artix7 dev boards for LiteX, to run Linux with
LiteX (512MB of RAM + a Video Framebuffer) or to create custom systems like a fast software
defined signal generator/recorder directly from a PC over PCIe, custom HDMI/SDI video
cards, etc... lots of possibilities :)
2021-05-06 09:47:01 +02:00
eec1078736
add QMTECH XC7A35T core board + daughter board
2021-05-06 05:50:48 +07:00
213d100860
Lattice iCE40 UltraPlus Breakout board (iCE40UP5K-B-EVN) added
2021-05-04 12:19:21 +02:00
026c623e17
Merge pull request #207 from hplp/master
...
Minor fixes for AU280 [work in progress]
2021-05-03 10:20:34 +02:00
2c5bf95f70
targets/trenz_tec0117: Switch to new GW1NPLL.
2021-04-30 11:32:24 +02:00
4f45462b95
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2021-04-29 15:41:03 -04:00
9686db0ed3
targets: Update names in build descriptions.
2021-04-29 11:56:52 +02:00
6117b98049
siglent_sds1104xe: Avoid disabling hardware interface with BIOS ethernet reset.
2021-04-29 11:52:41 +02:00
c28a161392
siglent_sds1104xe: Expose ethphy (to allow correct .dts generation).
2021-04-29 11:02:13 +02:00
7d651a9a17
siglent_sds1104xe: Switch to VideoVGAPHY and adjust timings.
2021-04-29 10:41:19 +02:00
cfbcb8538d
siglent_sds1104xe: Use custom 800x480 video timings.
2021-04-28 16:59:09 +02:00
84e65d2113
Merge pull request #204 from hansfbaier/master
...
terasic_sockit: fix: make video clock also optional as video terminal is optional
2021-04-28 09:42:13 +02:00
be6d08aff1
Merge pull request #205 from antmicro/jboc/lpddr4-tb-eth-delay
...
antmicro_lpddr4_test_board: fix ethernet rx delay issue
2021-04-28 09:41:11 +02:00
8ad91d9eb3
fix cmdltncy, with_led
2021-04-27 17:30:56 -04:00
f7ee3fa454
sds1104xe: Framebuffer fixes.
2021-04-27 19:32:03 +02:00
694608688d
terasic_sockit: fix: make video clock also optional as video terminal is optional
2021-04-27 08:52:11 +07:00
5bfeb999e4
targets/digilent_arty/flash: Simplify, use Quad mode and sys_clk (fast enough ~5MB/s).
2021-04-26 16:30:35 +02:00
2854df5028
Arty: move spiflash PHY do 4x faster clk domain
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-04-26 12:52:36 +02:00
84ae2b2bbc
arty: add option to use litespi QSPI controller
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-04-26 12:52:30 +02:00
2d2a10621f
antmicro_lpddr4_test_board: fix ethernet rx delay issue
2021-04-23 15:25:47 +02:00
228a9650d4
sqrl_acorn: Add flashing/reload support when used with PCIe, fix JTAG flash.
2021-04-21 17:00:40 +02:00
443b954c0c
platforms/xilinx_kcu105: Add Pmod0/1 connectors.
2021-04-19 15:11:43 +02:00
d2eabd112d
Add E-Elements Ego1 initial board support.
2021-04-12 08:20:46 +02:00
cd3d4c826e
Add Trenz te0725 initial board support.
2021-04-12 08:16:45 +02:00
5519c931f8
xilinx_alveo_u280: Fix DDR4 (tested with 8 modules on C0 and C1).
2021-04-12 08:07:16 +02:00
d830ef8393
Merge pull request #200 from rdolbeau/wukong_ethfix_fb
...
Qmtech Wukong: updates
2021-04-11 14:44:25 +02:00
2a7d8c5330
Merge pull request #199 from zyp/ignore_missing_deps
...
boards/compat: Skip targets with unsatisfied dependencies.
2021-04-11 14:43:01 +02:00
bad8821c2d
platforms/ecpix5: Add ULPI signals.
2021-04-11 11:12:56 +02:00
d5318dcb03
Qmtech Wukong: updates
...
fix ethernet clock (it's a GMII), add FB support over the HDMI connector (hdmi clock set from the resolution)
2021-04-10 16:26:25 +02:00
2e204285de
boards/compat: Skip targets with unsatisfied dependencies.
...
Fixes #194
2021-04-10 11:41:13 +02:00
03accabc25
lpddr4_test_board: Add antmicro vendor prefix.
2021-03-31 09:48:23 +02:00
a834985e00
Add target for LPDDR4 Test Board
2021-03-30 14:50:02 +02:00
d5ce1901d8
targets/digilent_nexys_video: Add specific Video PLL to give more flexibility on supported Video Timings.
2021-03-30 10:17:50 +02:00
9417044584
targets: Minor cleanup, make sure all targets can be built with default settings.
2021-03-29 16:22:39 +02:00
1ca8ef97a1
targets/add_sdram: Specific size only when useful (ie for targets with > 1GB of RAM).
2021-03-29 16:03:19 +02:00
ba01776432
targets/add_sdram: Simplify call by removing useless arguments.
...
- main_ram mem_map is now directly used by add_sdram when origin is None.
- max_sdram_size/min_l2_data_width are no longer exposed as targets arguments this can
still be used enforced directly in the few cases it is useful.
2021-03-29 15:28:31 +02:00
58286ce29e
minispartan6: Change video resolution to 640x480, framebuffer working with Linux-on-LiteX-Vexriscv.
2021-03-29 14:36:34 +02:00
09700b28d0
ulx3s: Change video resolution to 640x480, framebuffer working with Linux-on-LiteX-Vexriscv.
2021-03-29 11:35:55 +02:00
73ce7f9df1
ztex213 fix; propagate variant from targets to platform
2021-03-27 11:04:51 +01:00
7c537748a0
colorlight_i5: Remove PRBS (too specific to application).
...
If useful for several boards, this should probably be provided directly by LiteX.
2021-03-27 09:31:48 +01:00
7737575b88
terasic_deca: Remove --integrated-ram-size parameter (--integrated-main-ram-size provides the same functionnality).
2021-03-27 08:58:49 +01:00
f714e1210a
terasic_deca: Remove enforced CPU variant/debug: --cpu-variant=imac or --cpu-variant=imac+debug can be used for this.
...
The default CPU/Variant is defined in LiteX, enforcing the variant on the target
prevent usage of the other CPUs and also complicate maintenance.
2021-03-27 08:56:46 +01:00
a48def1352
rhsresearchllc_litefury: Remove since already supported by ./acorn.py --variant=cle-101.
2021-03-26 23:54:56 +01:00
4329a69128
sqrl_acorn_cle_215: Rename to sqrl_acorn and add support for all variants (CLE-101, 215 and 215+).
2021-03-26 23:52:36 +01:00
87df45e625
siglent_sds1104xe: Allow build without Etherbone.
2021-03-26 23:25:42 +01:00
c6ced293d4
targets/siglent_sds1104xe: Integrate VideoTerminal/VideoFrameBuffer.
2021-03-26 22:55:25 +01:00
52ded1c9aa
terasic_deca: Fix default_clk_name.
2021-03-26 22:43:40 +01:00
b54eed0859
terasic_sockit: Review/Cleanup for consistency with other boards.
2021-03-26 22:39:19 +01:00
53a767c85c
terasic_deca: Review/Cleanup for consistency with other boards.
2021-03-26 22:12:13 +01:00
be4965ca78
Merge pull request #192 from hansfbaier/deca_fixes
...
terasic_deca: fix cable name, ulpi, names, add gpio_serial
2021-03-26 21:52:31 +01:00
9fea5a7fc6
targets/digilent_nexys_video: Cleanup/Simplify #191 .
2021-03-26 21:49:22 +01:00
df58639916
nexys_video: choose VADJ value with arguments
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-03-26 14:50:05 +01:00
8c0ddd140b
terasic_deca: fix cable name, ulpi, names, add gpio_serial
2021-03-26 10:46:37 +07:00
e2de69496a
targets/lattice_crossing: Avoid direct override of SoCCore.mem_map (break default SoCore.mem_map with updated imports).
2021-03-25 22:41:26 +01:00
b284fe47c3
targets/terasic_sockit: Fix compilation.
2021-03-25 19:35:44 +01:00
22f167dde4
targets/sqrl_acorn_cle_215: Add missing false path constraints.
2021-03-25 18:19:20 +01:00
7d130d6981
targets/pcie: Cleanup.
2021-03-25 17:47:06 +01:00
333fb362ca
Move import Compat directly to litex_boards.__init__.py and simplify.
2021-03-25 16:47:47 +01:00
062b899e29
platforms/targets: Add mode Vendor prefixes.
2021-03-25 16:19:11 +01:00
7633eae360
targets/colorlight_i5: Remove l2-size args (already provided by soc_core_args.
2021-03-25 14:44:52 +01:00
5253a3c43e
test/ci: Fix/Update.
2021-03-25 14:21:13 +01:00
9a45c49918
targets/versa_ecp5: Also add Vendor prefix.
2021-03-25 14:13:32 +01:00
8a3cacae32
boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).
2021-03-25 14:11:17 +01:00
219067ed3a
Merge pull request #190 from kazkojima/colorlight_i5-video
...
colorlight_i5: Integrate Video Terminal and Video Framebuffer with ne…
2021-03-25 10:28:52 +01:00
47bdf5f759
targets: Use new CSR automatic allocation (self.add_csr will still work but is no longer required).
2021-03-25 10:11:24 +01:00
b3786c5e52
fomu/icebreaker: Update Up5KSPRAM import (litex.soc.cores.up5kspram deprecated, still supported for now but triggers a compat notice).
2021-03-24 17:22:55 +01:00
5995769b46
targets: Switch to soc_core_args/soc_core_argdict (instead of soc_sdram that is now deprecated, but still supported for now).
2021-03-24 17:22:51 +01:00
cb4e00c3f2
colorlight_i5: Integrate Video Terminal and Video Framebuffer with new VideoECP5HDMIPHY.
2021-03-20 07:56:59 +09:00
7a1fe7a6bc
nexys4ddr: add pmod connectors, and optional sdcard on pmodd
2021-03-19 12:33:11 -04:00
6d32c76aa2
Merge pull request #188 from hansfbaier/848-deca-video-bloat
...
fix #848 : allow ram initialization in bitstream to enable block ram
2021-03-19 11:11:05 +01:00
ddd46205aa
ulx3s: Integrate Video Terminal and Video Framebuffer with new VideoECP5HDMIPHY.
2021-03-18 15:06:35 +01:00
4330769add
minispartan6: Integrate Video Terminal and Video Framebuffer with new VideoS6HDMIPHY.
2021-03-18 14:10:42 +01:00
b7d86df01d
fix #848 : allow ram initialization in bitstream to enable block ram inference for ROM/RAM with initial value
2021-03-18 08:41:19 +07:00
8b69ee57a6
arrow_sockit: get video terminal working on VGA
2021-03-16 12:31:41 +07:00
75f7120ff9
targets/Ultrascale: Fix build since idelay's reset is now handled by the PLL (with_reset=True).
2021-03-11 10:00:06 +01:00
8d3aaa8ea9
targets/nexys_video: Revert clk100 to avoid breaking Linux-on-LiteX-VexRiscv (we'll remove it when the switch the simple framebuffer will be done).
2021-03-11 09:48:26 +01:00
0e2d9a571e
alveo_u280: Fix copyrights (avoid too much cascading on Platforms/Targets) and generate reset on idelay clock domain (similarly to recent change on others Ultrascale+ boards).
2021-03-10 11:23:27 +01:00
f4ea3fb0d9
Merge pull request #168 from hplp/alveo_u280
...
Alveo U280 board
2021-03-10 11:16:32 +01:00
7c6876df42
Merge pull request #186 from gatecat/mipi_pins_x
...
crosslink_nx_vip: Remove constraints for hard MIPI pins
2021-03-10 11:13:49 +01:00
61f44739d7
Merge pull request #185 from stffrdhrn/arty-jtagbone
...
arty: Add an option to enable jtagbone
2021-03-10 11:12:20 +01:00
47faaf20d5
deca: Integrate Video Terminal (untested, resource issue).
2021-03-09 15:02:30 +01:00
8fb80053f7
targets/versa_ecp5: Fix LiteEthPHYRMGII tx/rx delays (need to be updated due to a bug fix in the ECP5RGMII PHY).
2021-03-08 17:39:13 +01:00
496cae54ff
crosslink_nx_vip: Remove constraint for MIPI pins
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-08 14:26:40 +00:00
9cdcb8cb43
ecpix5: Add Etherbone (--with-etherbone).
2021-03-08 13:45:09 +01:00
52ce49cf0c
arty: Add an option to enable jtagbone
...
Then adds jtagbone for arty. I have tested with the following
litex_server and it seems to work fine.
litex_server --jtag --jtag-config openocd_xc7_ft2232.cfg
Note, the jtagbone and etherbone may be mutually exclusive, but I am not
sure how to define that in the args.
2021-03-08 07:05:54 +09:00
6139bd7eba
Merge pull request #183 from gatecat/vip_split_mclk
...
crosslink_nx_vip: Camera IO fixes
2021-03-06 11:20:53 +01:00
e280bff1ec
targets/video: Simplify/Cleanup integration.
2021-03-05 14:40:27 +01:00
ce669ac8cd
targets/nexys_video: Add optional VideoTerminal/VideoFramebuffer.
2021-03-05 14:33:22 +01:00
547157c9ca
crosslink_nx_vip: Fix cam_reset IO configuration
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-05 11:26:56 +00:00
542001dddf
crosslink_nx_vip: Split camera MCLK to its own resource
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-05 11:18:37 +00:00
21207533b0
targets/Ultrascale(+): Generate Reset to idelay clock domain (to be sure to follow UG571 reset sequence).
2021-03-04 19:49:03 +01:00
71652e8d44
icebreaker: Lower VideoTerminal resolution to use default 24MHz sys_clk.
2021-03-04 18:29:21 +01:00
253d8129af
nexys4ddr: Integrate simple VideoFrameBuffer.
2021-03-03 20:00:31 +01:00
51a0bbfa65
platforms/targets: Harmonize VGA pins and use new Video Terminal on all targets with VGA support.
2021-03-03 18:05:24 +01:00
465a95d2a6
icebreaker/nexys4ddr: Use new LiteXSoC's add_video_terminal method to add the Video Terminal.
2021-03-03 17:47:20 +01:00
3af8ec0c8d
targets/nexys4ddr: Replace VGA terminal with new LiteX's VideoTerminal.
2021-03-03 17:10:22 +01:00
7e3b8ab3b5
icebreaker: Add optional DVI Video Terminal with new LiteX's VideoOut core.
...
Tested with: ./icebreaker.py --cpu-type=serv --with-video-terminal --build --flash
https://twitter.com/enjoy_digital/status/1365324823447171074
2021-03-03 16:21:04 +01:00
aa5c4f9e5a
Merge branch 'master' into arty-numato-sdcard-pmod
2021-02-25 09:37:34 +01:00
768c10c630
targets/arty: rebase/merge PR179, rename adaptor to adapter.
2021-02-25 09:36:26 +01:00
6f558a5d65
Add board support for Terasic/Arrow DECA board
2021-02-25 12:25:43 +07:00
98c80f0b2b
Merge pull request #177 from antmicro/arty-dynamic-ip
...
target/arty: add eth_ip_configurable switch
2021-02-24 09:29:55 +01:00
08ccf384aa
targets/arty: Allow selection of sdcard mod adaptor
...
The default stays with the Digilent/Antmicro layout, but the user can
optionally provide --sdcard-adaptor numato to use the Numato layout.
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-24 14:59:50 +10:30
2b49082696
platforms/arty: Add numato sd card pmod
...
It has a different layout.
Thanks to David for documenting the pinout in this issue:
https://github.com/enjoy-digital/litex/issues/817
Expansion Pin SD SPI SD Artix Arty-A7 PMOD PIN PMOD Index
2 DATA_2 D4 JD1 1 0
4 CMD MOSI D3 JD2 2 1
6 DATA_0 MISO F4 JD3 3 2
CD F3 JD4 4 3
1 DATA_3 CS_N E2 JD7 7 4
3 CLK CLK D2 JD8 8 5
5 DATA_1 H2 JD9 9 6
G2 JD10
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-24 14:59:50 +10:30
ae0d4dc0d8
target/arty: add eth_dynamic_ip switch
2021-02-23 21:01:27 +01:00
aad8154e3a
targets/sds1104xe: Enable both Ethernet/Etherbone with hybrid LiteEthMAC.
2021-02-23 15:27:50 +01:00
5b28c619d5
Merge pull request #178 from yetifrisstlama/vc707_clk
...
fix vc707 default_clk_period
2021-02-23 12:17:45 +01:00
a90c0bc8f9
platforms/sds1104xe: Integrate changes from https://github.com/360nosc0pe/scope .
2021-02-22 13:45:48 +01:00
09c3bd616b
Merge branch 'master' into vc707_clk
2021-02-19 22:49:46 -08:00
c32e790421
vc707: fix default clock frequency
2021-02-19 22:47:18 -08:00
11405d9ee3
targets/sds1104xe/BaseSoC: Enable Etherbone by default also defaults to Crossover UART when kwargs is empty.
2021-02-18 19:30:05 +01:00
1fcd96971d
Merge pull request #172 from hansfbaier/master
...
sockit: Add an option to plug in an UART via the GPIO daughter board, make connector pin numbers one-based
2021-02-16 22:44:52 +01:00
975150ca68
platforms/sds1104xe: fix ddram IOStandard (SSTL15, thanks @tmbinc) and add INTERNAL_VREF on ddram banks.
2021-02-16 17:32:41 +01:00
9baa9d5d83
platform/de10nano: fix programmer (thanks @Godtec, see https://github.com/enjoy-digital/litex/pull/811 ).
2021-02-12 15:23:17 +01:00
9a94e835c3
sockit: Add an option to plug in an UART via the GPIO daughter board
2021-02-10 14:52:19 +07:00
7442c2dada
vc707.py: clk156 add missing constraint
2021-02-08 19:04:01 -08:00
fef9dd036a
platforms/de0nano: directly use JP1 connector for serial pins.
2021-02-08 09:52:26 +01:00
ea58ef94a7
Merge pull request #170 from hansfbaier/master
...
arrow_sockit: add support for MiSTer XS SDRAM modules
2021-02-04 16:44:58 +01:00
38242b713f
Merge pull request #171 from antmicro/symbiflow_nexys_video_support
...
nexys_video: enable symbiflow toolchain
2021-02-04 16:42:34 +01:00
e6d05001aa
use parameter for dram channel 0 or 1 and LedChaser
2021-02-03 17:29:30 -05:00
cdff5e3ca3
nexys_video: enable symbiflow toolchain
...
Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com>
2021-02-03 14:52:54 +01:00
c64e13f687
arrow_sockit: add support for MiSTer XS SDRAM modules
2021-02-03 09:37:03 +07:00
8692ed462f
targets/colorlight_i5: use .bit stream instead of .svf when loading.
2021-02-03 08:17:24 +09:00
31d7f810e7
use SDRAM C1 sysclk and constraints
2021-02-02 11:15:25 -05:00
f32c61d5d2
Merge pull request #163 from garytwong/friendly-incompatible-options
...
Be friendlier about incompatible options.
2021-02-02 08:51:46 +01:00
a1d830566a
added ddr4_sdram_c1 constraints
2021-02-01 12:22:41 -05:00
7c48af9b50
tec0117: get SDRAM working and increase sys_clk_freq to 25MHz.
...
./tec0117.py --build --load
Still some FIXMEs but validate use of the embedded SDRAM with LiteDRAM/LiteX:
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2020 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Feb 1 2021 13:09:35
BIOS CRC passed (5abceb2e)
Migen git sha1: 40b1092
LiteX git sha1: f324f953
--=============== SoC ==================--
CPU: VexRiscv_Lite @ 25MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 24KiB
SRAM: 4KiB
L2: 0KiB
SDRAM: 8192KiB 16-bit @ 25MT/s (CL-2 CWL-2)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2MiB)...
Write: 0x40000000-0x40200000 2MiB
Read: 0x40000000-0x40200000 2MiB
Memtest OK
Memspeed at 0x40000000 (2MiB)...
Write speed: 5MiB/s
Read speed: 6MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> mem_list
Available memory regions:
ROM 0x00000000 0x6000
SRAM 0x01000000 0x1000
SPIFLASH 0x80000000 0x1000000
MAIN_RAM 0x40000000 0x800000
CSR 0x82000000 0x10000
litex> mem_test 0x40000000 0x800000
Memtest at 0x40000000 (8MiB)...
Write: 0x40000000-0x40800000 8MiB
Read: 0x40000000-0x40800000 8MiB
Memtest OK
litex>
2021-02-01 13:32:01 +01:00
51c5d69586
targets/tec0117: use custom CPU/ROM/SRAM config to minimize resources.
2021-02-01 13:31:56 +01:00
538878ce13
tec0117: disable BIOS XIP from SPI Flash for now since not working (SPÏ Flash set to power down mode with bitstream?).
2021-02-01 13:31:51 +01:00
6cce07d9db
tec0117: add spiflash4x pins, rework flash function to flash both bitstream/bios.
2021-02-01 13:31:44 +01:00
0831b33285
tec0117: fix copyrights.
2021-02-01 13:31:39 +01:00
5e4b29c0b5
sockit: Fix cable name, default to jtag_atlantic
2021-02-01 11:48:06 +07:00
601c297c8f
Merge pull request #164 from rdolbeau/ztex213
...
Support file for the ZTEX USB-FPGA Module 2.13
2021-01-30 21:43:07 +01:00
31df53ef0a
Add flash to SPI flash support for board ECPIX5 (needs update to openfpgaloader.py from litex to work)
2021-01-30 13:19:08 +01:00
027e57b851
Support file for the ZTEX USB-FPGA Module 2.13
2021-01-30 05:19:18 -05:00
99e2f04ee5
Be friendlier about incompatible options.
...
Collect --with-ethernet/--with-etherbone, --with-spi-sdcard/--with-sdcard,
etc. into ArgumentParser.add_mutually_exclusive_group()s. That way, we
get pretty --help output, and appropriate error messages if somebody
tries to ask for something that doesn't make sense.
2021-01-29 18:08:38 -07:00
abccd12058
tec0117: add initial SDRAM support for the embedded SDRAM of the SIP.
...
Still a WIP but able to do the P&R with modifications on LiteX to generate
the IO_PORT constraints but not the IO_LOC for the SDRAM pins.
2021-01-29 22:28:40 +01:00
edb99797aa
targets/tec0117: minor cleanups.
2021-01-29 21:25:10 +01:00
345feddce9
ECPIX-5: ddram: Add missing address pin.
...
Fixes #161
2021-01-29 16:03:43 +03:00
7525b8772f
platforms/fpc_iii: avoid dummy pin on ethernet.rst_n.
...
rst_n is optional in LiteEth's PHYs.
2021-01-29 09:33:33 +01:00
19767e1a2a
platforms/fpc_iii: avoid using dummy pin on odt.
...
Now possible with 2f5784432d
2021-01-29 09:30:54 +01:00
3deeb69531
targets/fpc_iii: review/cleanup to increase similarities with others targets to ease maintenance.
2021-01-29 08:46:31 +01:00
6c6d8a1393
platforms/fpc_iii: review/cleanup to increase similarities with others platforms and ease maintenance.
2021-01-29 08:41:10 +01:00
1916677dc9
use VREF constraint for DDR4 C0
2021-01-28 19:58:38 -05:00
4e5bb1bf1e
Add FPC-III board support.
...
FPC-III is the Free Permutable Computer; details on the board are
available from:
https://repo.or.cz/fpc-iii.git
2021-01-28 09:51:42 -07:00
9bd667720d
targets/ecpix5: add LedChaser with red leds.
...
Fits nicely LambdaConcept colors and Blue/Green leds are too bright and would need to be controlled through a PWM.
2021-01-28 14:29:07 +01:00
aa20fca1f1
ecpix5: reorder rgb_leds to have ld7:0, ld8:1, ld5:2, ld6:3.
2021-01-28 14:25:16 +01:00
691bfd8b70
Merge pull request #159 from euryecetelecom/master
...
Add ECPIX5 board components and pinouts (sata/spiflash/PMOD) + review openocd IDs
2021-01-28 14:01:01 +01:00
bd716d956f
netv2: add device variant to allow 100T as well
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-01-28 13:19:53 +01:00
9beba7209d
Add ECPIX5 components and pinouts (pmod/sata/spiflash) + review IDs from ECPIX5 openocd configuration
2021-01-28 12:00:28 +01:00
aef78831c8
colorlight_i5: Use tx_delay=0 for LiteEthPHYRGMII instead of target specifig bios initialization
2021-01-27 18:19:27 +09:00
84656a9c2e
re-compare and adjust to u250
2021-01-26 23:03:09 -05:00
c3fa0eac8b
Add colorlight i5 board support
2021-01-27 11:44:59 +09:00
5fd04a97ea
targets/netv2/pcie: reduce max_pending_requests to 2 to reduce resource usage.
2021-01-26 11:01:51 +01:00
d256cc8bd6
camlink_4k: disable leds when serial is used (since pin is shared).
2021-01-25 12:19:29 +01:00
1e1bec10c4
orangecrab: remove dm_remapping workaround: we are now using Wihsbone/L2 path with VexRiscv-SMP on this board.
2021-01-25 11:52:59 +01:00
537f494cbb
arrow_sockit: review/harmonize with others boards.
2021-01-25 09:14:46 +01:00
4adc1b14c4
platforms/de0nano: use separator for connectors.
2021-01-25 08:58:12 +01:00
bbaa2fdc98
Merge pull request #149 from hansfbaier/master
...
Add board support for Terasic/Arrow SocKit, Add connectors to de0-nano
2021-01-25 08:55:48 +01:00
45f538b1d3
Merge pull request #155 from blakesmith/add_spi_flash
...
ULX3S: Make spiflash optionally accessible from the SoC, and bootable
2021-01-24 21:22:35 +01:00
8132f9f65b
Merge pull request #154 from euryecetelecom/master
...
Fix SDCard issue when no SDCard inserted in ECPIX5 board.
2021-01-24 21:14:58 +01:00
72985c72ca
Merge pull request #153 from Disasm/ecpix5-add-45f
...
ECPIX-5: add option to select ECP5 device
2021-01-24 21:14:14 +01:00
cae51c0c24
ULX3S: Make spiflash optionally accessible from the SoC, and bootable
2021-01-23 14:44:26 -06:00
aa771e9ff4
de0-nano: add connectors
2021-01-23 20:18:15 +07:00
c9f0745d54
sockit: add board definitions for Terasic SocKit
2021-01-23 20:17:38 +07:00
23760e2eae
orangecrab/CRGSDRAM: add missing rst signal (to reset from the SoC).
2021-01-22 22:55:02 +01:00
b386ee5059
Fix SDCard issue when no SDCard inserted in ECPIX5 board. Now enable to detect SDCard presence.
...
https://github.com/litex-hub/linux-on-litex-vexriscv/issues/171
2021-01-20 18:02:13 +01:00
a678672fc9
ecpix5: add option to select ECP5 device
2021-01-19 01:22:52 +03:00
e71a4940c0
nexys4ddr: etherbone support
2021-01-15 12:14:40 -05:00
7a738245af
fix bitstream problem
2021-01-14 21:53:25 -05:00
5a73eb0b6d
initiate target and platform for alveo_u280 board
2021-01-14 18:35:43 -05:00
6a5f2f59a6
targets/orangecrab: use new ECP5DDRPHY's cmd_delay to add extra delay on DDR3's Clock/Commands.
...
This fixes https://github.com/enjoy-digital/litedram/issues/130 and has been tested
at 48/64/96MHz on MT41K64M16 and MT41K512M16 variants.
Also remove un-needed cd_sys2x_eb.
2021-01-12 18:57:22 +01:00
9ff90eb9fe
targets/c10lprefkit: fix default sys-clk-freq.
2021-01-12 16:15:52 +01:00
0a7443d273
targets/orangecrab: make usr_btn optional to fix compilation with revision 0.1.
2021-01-08 19:30:37 +01:00
ae5494d7b6
orangecrab: defaults to USB-ACM UART.
2021-01-08 19:01:41 +01:00
c6e75122d9
sds1104xe: defaults to Crossover UART.
2021-01-08 19:00:41 +01:00
ab72f69937
targets/ac701: rename --ethernet-phy to --eth-phy for consistency with others targets.
2021-01-08 18:50:01 +01:00
0ee62dd681
add etherbone ip address option for relevant boards
2021-01-08 18:44:31 +01:00
869cce2bba
targets/colorlight_5a_75x: rename etherbone-ip args to eth-ip.
...
eth-ip will also be used to configure Ethernet IP addresss.
2021-01-07 09:26:38 +01:00
c829a47c31
targets/colorlight_5a_75x: Automatically disable Led Chaser when serial is used.
2021-01-07 09:17:28 +01:00
adbcc81ecf
Merge pull request #145 from hansfbaier/master
...
colorlight: Add option for etherbone ip address and LED chaser
2021-01-07 09:08:43 +01:00
a6e867c691
Merge pull request #144 from gsomlo/gls-genesys2-sdcard
...
genesys2: LiteSDCard support
2021-01-07 08:12:24 +01:00
d2d17e00a2
Merge pull request #142 from geertu/master
...
platforms/ecp5: Fix slewrate configuration
2021-01-07 08:11:30 +01:00
d73bd2f7ce
targets/xilinx: add comment on sys_clk to pll.clkin false path.
2021-01-07 08:01:54 +01:00
1ac1c6857f
targets/xilinx: add false path constraint between sys_clk and pll.clkin.
...
The SoC reset added recently creates a path between sys_clk and pll.clkin
clock domains that is reported by the tools but that can be safely ignored.
2021-01-07 00:02:46 +01:00
0d69cfa6b0
colorlight: make LEDs optional
2021-01-05 08:03:26 +07:00
4bec17e1a7
colorlight: Add option for etherbone ip address
2021-01-05 07:49:44 +07:00
2589d9f704
genesys2: add (spi-)sdcard build options
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2021-01-04 13:57:21 -05:00
4eb0026a69
genesys2: add "rst" and "cd" signals to (spi-)sdcard records
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2021-01-04 13:10:13 -05:00
4a95b94dbf
platforms/ecp5: Fix slewrate configuration
...
When building linux-on-litex-vexriscv for OrangeCrab:
Warning: IOBUF 'spisdcard_clk' attribute 'SLEW' is not recognised (on line 207)
Warning: IOBUF 'spisdcard_mosi' attribute 'SLEW' is not recognised (on line 210)
Warning: IOBUF 'spisdcard_cs_n' attribute 'SLEW' is not recognised (on line 214)
Warning: IOBUF 'spisdcard_miso' attribute 'SLEW' is not recognised (on line 218)
Platforms using litex.build.lattice.LatticePlatform seem to support only
"SLEWRATE", not "SLEW". Fix the few offenders in the LogicBone and
OrangeCrab platform definitions.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-01-04 17:08:51 +01:00
fe67766fb7
targets/gensdrphy/halfsdrphy: pass new optional sys_clk_freq (used to compute cl).
2021-01-04 11:38:07 +01:00
0e3c03f2f6
mercury_xu5: remove unneeded cmd_latency=0 (now defaulting to 0).
2021-01-04 10:48:34 +01:00
5cc49bafbd
orangecrab: Run reset_timer with por/48MHz clock domain (sys clock domain is now directly reseted on usr_btn press).
2021-01-04 09:42:05 +01:00
1fb24d4c71
orangecrab: Avoid usb clock domain reset on usr_btn press or SoC reset.
...
Allows the USB-ACM link to stay up during reset.
2021-01-04 09:05:19 +01:00
06cb49af37
targets/arty: add variant support through --variant args.
...
./arty.py --variant=a7-35 or a7-100
./arty_s7.py --variant=s7-50 or s7-25
2020-12-29 18:43:14 +01:00
02a81d54e2
targets/ecpix5/eth: set rx_delay to 0ns (tested with netboot on R01).
2020-12-29 16:01:12 +01:00
93779ecb95
platforms/colorlight_5a_75b: revert toolchain args.
...
Useful to do tests with Diamiond.
2020-12-29 14:22:42 +01:00
f2985f1e71
Merge pull request #141 from la6m/Colorlight_v8.0
...
add colorlight v8.0 PCB
2020-12-29 14:20:29 +01:00
84098d2de5
targets/qmtech_wukong: submitted target was the platform file, update with target shared in #133 .
...
Build tested with /qmtech_wukong.py --with-sdcard --with-ethernet --integrated-rom-size=0x10000 --build.
2020-12-29 14:13:11 +01:00
b67b18caad
qmtech_wukong: review/cleanup platform.
2020-12-29 14:10:49 +01:00
3e6b934961
add colorlight v8.0 PCB
2020-12-29 13:52:13 +01:00
e380f24655
targets/qmtech_wukong: +x.
2020-12-29 13:24:41 +01:00
4b721eded7
add QmTech Wukong board support.
2020-12-29 13:20:42 +01:00
9beaf25822
nexys4ddr: fix eth/int_n pin (B8) and use 4-bit on vga.blue.
2020-12-24 10:15:29 +01:00
2a04c5c74e
nexys4ddr: add support for litexvideo VGA Terminal
...
This commit adds VGA support for the Nexys A7/ Nexys 4 DDR.
The VGA is however limited to RGB443 instead of the full 12bit RGB444.
This is because IO D8 which is MSB for Blue, is also used for ETH int_n.
This makes the final output have a yellow tint.
2020-12-23 02:24:18 +05:30
f6a106cdf4
Fix orangecrab target
2020-12-20 01:07:43 +03:00
00fc2c5166
targets/orangecrab: use new DM remapping capability of LiteDRAM to fix LDM/UDM.
...
Required by VexRiscv-SMP that uses DMs on LiteDRAM interface.
2020-12-16 11:52:58 +01:00
bb58258fd4
Fix de10nano target
2020-12-14 15:27:33 +03:00
ec4ccc9fa5
platforms/xcu1525: fix ddram 1/2/3 pinout.
...
DDR4 now validated successfully with LiteDRAM on the 4 channels.
2020-12-11 13:58:26 +01:00
519f9449fa
targets/sds1104: litex_term now directly supports crossover uart.
2020-12-10 13:56:01 +01:00
18337cdf25
targets/arty: sync with litex repository
...
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
2020-12-07 17:32:40 +01:00
f66860c201
zybo_z7: fix clock pin constraint
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2020-12-07 16:46:20 +01:00
8e5f955e4e
targets/orangecrab: Fix --sdram-device help text
...
Obviously --sdram-device takes the SDRAM device, not the ECP5 FPGA
device.
Fixes: bf3c9dc9bf
2020-12-04 14:34:01 +01:00
fe563baec7
targets/fomu: modification to ValentyUSB no longer required.
...
Following commits make it generic/portable while still using IOBuffers:
77b9d01058371526e432
2020-11-27 19:40:45 +01:00
5a4e28d47d
target/usb_acm: switch git clone to litex-hub/valentyusb repo (up to date with LiteX).
2020-11-27 18:53:45 +01:00
8d1095224f
add support for redpitaya14/16
2020-11-26 06:54:11 +01:00
11fa5c34ac
nexus: Allow selection of toolchain
...
Signed-off-by: David Shah <dave@ds0.me>
2020-11-25 09:45:25 +00:00
159a0c751c
targets/colorlight_5a_75x: update instructions and LiteEthPHYRGMII's tx_delay (required with LiteEth fixes).
2020-11-23 12:30:36 +01:00
03bb929f27
colorlight_5a_75x: add LedChaser.
2020-11-23 10:14:20 +01:00
d18deef10d
colorlight_5a_75x: switch prog to FT232 based programmer (ex: JTAG HS2).
2020-11-23 10:13:57 +01:00
ce38cff41d
mercury_xu5: reduce cmd_latency to fix problems with DRAM leveling
2020-11-20 15:31:47 +01:00
a2f3add24e
Merge pull request #123 from teknoman117/litefury
...
Support for the RHS Research LiteFury
2020-11-20 08:44:27 +01:00
389b623fe2
targets/litefury: new target
...
LiteFury is an Artix-7 development board in the M.2 form factor
for PCIe accelerator development. It's similar to the Aller but
with an xc7a100t rather than an xc7a200t and no TPM module.
https://rhsresearch.com/collections/rhs-public/products/litefury
2020-11-19 21:52:14 -08:00
49e1c34dfd
targets/acorn_cle_215: add SATA.
2020-11-18 19:14:18 +01:00
778ce53865
targets/xcu1525: add SATA.
2020-11-17 15:27:42 +01:00
27e19644f4
targets/kcu105: add SATA.
2020-11-16 18:44:18 +01:00
27f60b2e93
add initial Siglent SDS1104X-E support (Ethernet & DDR3 validated).
...
Pinout from https://github.com/360nosc0pe project.
2020-11-13 12:20:15 +01:00
d42af3ea19
targets: add --sys-clk-freq support to all targets.
2020-11-12 18:07:28 +01:00
72afb95329
targets: create platform on BaseSoC for all targets (consitency).
2020-11-12 16:57:31 +01:00
843e724e3d
targets/pcie: simplify using new LiteX's add_pcie method and enable it on all devices supported by LitePCIe.
2020-11-12 16:39:42 +01:00
9f11bfb0d1
qmtech_ep4ce15: convert name to lowercase, minor cleanup and add to test_targets.
2020-11-12 14:33:45 +01:00
31eb74dc2d
Merge pull request #122 from baselsayeh/master
...
add Qmtech EP4CE15 coreboard support
2020-11-12 14:27:49 +01:00
46e8a957fe
platforms/zybo_z7: fix default_clk typo.
2020-11-12 14:26:36 +01:00
ac075f18c7
platforms/crosslink_nx_evn/vip: add default_clk.
2020-11-12 14:26:17 +01:00
f3ccd140c2
targets/simple: add try/except on leds.
2020-11-12 14:26:00 +01:00
0fc67ddfdb
update copyright
2020-11-12 15:25:39 +02:00
7c6df67739
targets: add tinyfpga_bx target (based on icebreaker/fomu targets).
2020-11-12 14:09:25 +01:00
302e4ffdff
targets/simple: simplify (only keep minimal SoC + Leds) and add load argument.
...
ex of use:
./simple.py litex_boards.platform.ulx3s --build --load
./simple.py litex_boards.platform.trellisboard --build --load
./simple.py litex_boards.platform.arty --build --load
etc...
2020-11-12 13:54:30 +01:00
a4d05522d4
platforms/ice40/ecp5: add toolchain parameter with default to trellis (ECP5) or icestorm (iCE40).
...
Required to simplify simple.py target and use trellis/icestorm as default toolchain.
2020-11-12 13:33:30 +01:00
5cf7731f37
targets/netv2: add PCIe.
2020-11-12 12:16:01 +01:00
7a9f175450
targets/pcie: remove force of csr_data_width to 32 (this is now the default) but just add a check on the pcie block.
2020-11-12 12:08:20 +01:00
4401fec1e6
targets: remove add_csr("crg") (no longer needed).
2020-11-12 11:54:11 +01:00
bd4e92ad13
targets: cleanup, uniformize build arguments between targets.
2020-11-12 11:46:00 +01:00
1b1ed5ebf1
add Qmtech EP4CE15 coreboard support
2020-11-12 01:56:36 +02:00
5fbb176c2a
targets/crosslink_nx: update NXLRAM import.
2020-11-09 11:05:18 +01:00
afe44e2bd6
targets/crosslink_nx_evn: update NXPLL import.
2020-11-09 10:25:30 +01:00
39d979a9d3
targets/Ultrascale: add missing AsyncResetSynchronizer import.
2020-11-09 10:25:05 +01:00
97b64d16a6
Lattice NX PLL Support
2020-11-08 20:34:46 -06:00
1f52fbaca6
xcu1525: fix last ddram channel numbering.
2020-11-06 10:48:26 +01:00
2b17dc1b89
target: add rst signal to CRG to allow full reset of the SoC on reboot command.
2020-11-04 11:13:42 +01:00
aa6b9cab4a
targets/crosslink_nx_vip: +x.
2020-11-04 09:30:57 +01:00
ce14775dfb
targets/tec0117: move SerialFlashManager import to flash function.
2020-11-04 09:30:31 +01:00
2da4eabffe
platforms/icebreaker: fix refactoring typo.
2020-11-04 09:30:01 +01:00
c093d0d0fc
platforms: cleanup pass to uniformize comments/separators/orders.
2020-11-03 10:48:57 +01:00
8d26c241cd
kc705: revert sys_clk_freq to 125MHz.
2020-11-02 19:51:48 +01:00
babf638c2b
targets/nexys_video: add SATA support.
2020-11-02 19:43:25 +01:00
d1c9cc7553
Add LFE5U-12F device for ULX3S
2020-11-01 23:45:32 +00:00
e950a4a588
targets/kc705: update sata pads.
2020-10-30 17:12:59 +01:00
a410e447e1
targets/kc705/sata: enable write support.
2020-10-30 14:51:40 +01:00
d626861e95
platforms/acorn_cle_215: add serial_io (on P2).
2020-10-29 12:10:12 +01:00
f9252fdd45
targets/kc705: simplify SATA using LiteX's add_sata integration method.
2020-10-29 10:16:40 +01:00
7da8628fba
targets/kc705: switch SATA to gen2.
2020-10-28 19:09:30 +01:00
931f6667ac
targets/kc705: add initial SATA support.
2020-10-26 15:15:24 +01:00
51934567fe
Merge pull request #118 from daveshah1/lifcl-vip
...
Add CrossLink-NX VIP board platform and target
2020-10-22 11:03:47 +02:00
a38c1e7062
mist: add copyrights.
2020-10-22 10:48:58 +02:00
20720693c4
crosslink_nx_vip: Add HyperRAM support
...
Signed-off-by: David Shah <dave@ds0.me>
2020-10-22 09:15:40 +01:00
b278d8bccc
Add CrossLink-NX VIP board platform and target
2020-10-22 09:15:35 +01:00
4541c39e94
Initial support for the MIST board ( https://github.com/mist-devel/mist-board/wiki )
2020-10-17 12:28:22 +02:00
814e7630e4
targets/xilinx: use generic name for idelay clk (avoid clk200, clk400, etc...) since we somtimes want to change it.
2020-10-13 12:10:29 +02:00
06137452d2
targets/xcu1525: use ddram_channel to select clk300.
2020-10-13 11:57:00 +02:00
982cfd5ad5
platforms/xcu1525: fix ddram constraints, add clk300 constraints for all channels.
2020-10-13 11:50:36 +02:00
c3ea04b6e9
targets/s7/us: update sdram (manual cmd_latency no longer needed).
2020-10-12 18:46:21 +02:00
ddf7038c78
ulx3s: add 1.7 and 2.0 revisions support.
2020-10-12 13:23:26 +02:00
204d22c62b
Merge pull request #115 from BryanJacobs/master
...
platforms/ulx3s: Update ULX3S SD pins for revision 2.0
2020-10-12 12:55:17 +02:00
3b11e60fb1
Update ULX3S SD pins for revision 2.0
2020-10-11 14:17:48 +11:00
5e67853a21
versa_ecp5: Add --eth-phy to select ethernet phy
...
This also simplifies the logic a bit.
2020-10-09 23:56:16 +02:00
477734ff06
versa_ecp5: Add etherbone support
...
Etherbone can be enabled with --with-etherbone
2020-10-09 00:53:08 +02:00
55da8b867a
platforms/zedboard: minor cleanups to uniformize with other platforms.
2020-10-07 11:25:20 +02:00
e225cbd28f
add zedboard platform to CI
2020-10-06 11:35:03 -07:00
8ee20a3f30
clean up imports
2020-10-06 11:24:34 -07:00
865c2bd98c
zedboard platform: clean up
...
* remove unused code
* remove oled integration code
* openocd = default programmer
2020-10-06 11:00:36 -07:00
94ef096e77
Merge branch 'master' of https://github.com/litex-hub/litex-boards into HEAD
2020-10-06 10:05:34 -07:00
fff20f7532
targets/fomu: base it on iCEBreaker target + USB-ACM.
...
This uniformizes Fomu target with others, provide a simple example of LiteX SoC
on Fomu and will ease maintenance.
2020-10-06 11:39:30 +02:00
12aed44577
add zedboard platform
2020-10-06 00:28:54 -07:00
79ef091a06
Merge pull request #110 from pepijndevos/gowin
...
Add initial support for Trenz TEC0117 board
2020-10-05 19:50:09 +02:00
2ee32f2a15
Merge pull request #109 from geertu/orangecrab-Fix-r0.1-user_led-mapping
...
orangecrab: Fix r0.1 user_led mapping
2020-10-02 09:40:41 +02:00
062fbd6c63
Merge pull request #108 from daveshah1/dave/nx-evn-doc
...
crosslink_nx_evn: Improve documentation on UART jumpers
2020-10-02 09:40:04 +02:00
18e5def9f2
don't verify erase, very slow
2020-10-01 08:41:16 +02:00
81e4f1f158
add initial support for Trenz TEC0117 board
2020-09-30 14:01:36 +02:00
b2e34f5faf
orangecrab: Fix r0.1 user_led mapping
...
On r0.1, all three user_leds are mapped to the same pin.
Fix this by mapping them to the pins connected to the individual
channels of the RGB LED, to match the comments, the schematics, and the
spirit of r0.2.
Untested on real hardware (I have r0.2 only).
Fixes: c94cbae0c0
2020-09-25 10:33:21 +02:00
de09b10726
targets/xcu1525: add ddram-channel selection and rewrite DRC workaround comment.
2020-09-24 18:19:49 +02:00
cc53206aff
targets/kcu105: create specific cd_eth for ethphy.
2020-09-24 10:25:55 +02:00
5b7288cfee
targets/kcu105: add Etherbone support.
2020-09-24 09:55:11 +02:00
77ba49f2bb
targets/pcie: update timing_constraints (now provided by the .xci).
2020-09-24 09:50:55 +02:00
c6610b4a3f
platforms/xcu1525: update ddram1/2/3 pinout.
...
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMMx.xdc
2020-09-20 21:07:00 +02:00
e5a144e9cd
platforms/xcu1525: update ddram0 pinout.
...
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMM0.xdc .
2020-09-19 23:28:34 +02:00
8ffb86c0dc
platforms/fk33/xcu1525: define pcie_x2/x4/x8/x16.
2020-09-19 22:37:05 +02:00
e4cdbe0f7a
targets/ac701: reduce ddram pads to the first 4 modules.
2020-09-05 11:46:07 +02:00
8a9fd02768
crosslink_nx_evn: Improve documentation on UART jumpers
...
Signed-off-by: David Shah <dave@ds0.me>
2020-09-05 09:58:28 +01:00
76ac4a69a8
rename forest_kitten_33 platform/target to fk33.
2020-09-04 20:05:18 +02:00
979fee7517
forest_kitten_33: add pcie.
2020-09-04 20:02:43 +02:00
ad48728160
xcu1525: update headers (were still using old format).
2020-09-04 19:59:09 +02:00
ad4c483c32
Merge pull request #106 from daveshah1/dave/alveo_u250_pcie
...
alveo_u250: Add PCIe x4 support
2020-09-04 19:22:48 +02:00
a68c00e48e
Merge pull request #104 from DerFetzer/colorlight_5a_75e_v6_0
...
Add support for 5A-75E V6.0 board
2020-09-04 19:21:02 +02:00
ae6a052e57
alveo_u250: Add PCIe x4 support
...
Based on the implementation in xcu1525
Signed-off-by: David Shah <dave@ds0.me>
2020-09-04 14:20:04 +01:00
2eda9d0252
xcu1525: add DDR4 IOs for C1/C2/C3 and fix compilation (untested).
2020-09-04 11:34:33 +02:00
7b6b71d4e3
xcu1525: add initial DDR4 support in C0 (untested).
2020-09-03 19:48:23 +02:00
5a62a07b45
xcu1525: add initial PCIe support (untested).
2020-09-03 19:26:02 +02:00
51e881d1ff
add minimal xcu1525 support (VCU1525 or BCU1525 boards).
2020-09-03 19:06:43 +02:00
8bd736bd77
targets/colorlight_5a_75x: make Ethernet PHY selectable, cast sys_clk_freq to int for Wishbone
2020-09-02 22:08:45 +02:00
cc78574297
targets/colorlight_5a_75x: fix rx_data pin order for Ethernet PHY 0
2020-09-02 22:04:23 +02:00
24b853c2db
targets/colorlight_5a_75x: force use of internal oscillator when using Ethernet with 5A-75E V6.0
2020-09-01 17:07:52 +02:00
8b1fee0e66
Add support for 5A-75E V6.0 board
2020-09-01 17:02:17 +02:00
9b6ed6bdf1
targets/orangecrab: add fallback to bootloader when usr_btn is pressed for 1 second.
2020-09-01 16:22:32 +02:00
b9ac72cf78
targets: simplify clocking on iCE40/ECP5 targets (AsyncResetSynchronizer now integrated in PLL).
2020-09-01 13:38:32 +02:00
9e2d301745
targets/icebreaker: simplify, update PLL/API and BIOS execution from SPI Flash.
2020-09-01 12:58:13 +02:00
beccecf59f
orangecrab: reduce DDR3 power consumption/heat and get back USB PLL to CRGSDRAM.
...
- disable DQ termination.
- disable RTT_NOM.
- drive VCCIO/GND pads.
Reduce current from 0.25A to 0.12A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=48e6.
Still working at 96MHz, 0.17A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=96e6.
See https://github.com/enjoy-digital/litedram/issues/216 .
2020-08-28 20:01:54 +02:00
63b65e278c
crosslink_nx_evn: update copyrights.
2020-08-24 22:33:58 +02:00
153326fa26
targets/icebreaker: update flash.
2020-08-24 17:19:15 +02:00
795e34aafd
add initial Crosslink-NX support.
2020-08-24 16:47:38 +02:00
84c19a6cdf
targets/de0nano: set sys2x_ps phase to 180° for sdram_rate=1:2.
2020-08-24 09:28:51 +02:00
70594a5305
ulx3s: simplify sdram constraints and increase phase to 180 for sdram_rate=1:2.
2020-08-24 09:05:58 +02:00
1781be166a
general: add SPDX License identifier to header and specify files are part of LiteX-Boards.
2020-08-23 15:00:17 +02:00
83d8b8d1b4
platforms/acorn_cle_215: integrated sdcard ios as extension.
2020-08-22 22:11:51 +02:00
f328909578
Moved platform call inside of BaseSoC init for compatibility with linux-on-litex-vexriscv support. Added optional spi-sdcard support over P2 header.
2020-08-09 16:27:41 -04:00
45bb329b56
targets/colorlight_5a_75x: enable HalfRate SDRAM PHY.
2020-08-07 19:26:12 +02:00
b6a1ad5a9c
targets/orangecrab: add simple CRG when built without DDR3.
2020-08-07 18:10:03 +02:00
869ceadacb
targets: use platform.request_all on LedChaser.
2020-08-06 20:04:03 +02:00
d2cd6d4c0e
arty: Change USB-uart and I2S Pmod configuration
...
This makes it compatible with the Arty A7 expansion board by Antmicro
(https://github.com/antmicro/arty-expansion-board ).
2020-08-05 11:54:25 +02:00
ee28d7b5ec
targets/ulx3s/add_oled: simplify.
2020-08-04 12:31:15 +02:00
eba70377b7
add optional OLED peripheral to ULX3S target
2020-08-04 11:07:30 +02:00
929e55d7e6
platforms/trellisboard: add SDCard PMOD pins.
2020-07-29 09:07:55 +02:00
5fd3e8dbcd
ecpix5: add SDCard.
...
Validated with Linux-on-LiteX-VexRiscv.
2020-07-28 17:45:49 +02:00
94ccf1dd3e
targets/trellisboard: simplify clocking when no DDR3, remove firmware_ram (was here for debug).
2020-07-27 16:31:46 +02:00
eb8a484032
targets/de10nano: fix typo.
2020-07-26 12:01:11 +02:00
2cef54a909
targets/colorlight_5a_75x: avoid sys_clk_freq of 125MHz with etherbone (no longer required).
...
This allows creating SoCs with CPU, SDRAM and Etherbone enabled all together.
2020-07-26 11:58:42 +02:00
760b8ff93a
arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard.
2020-07-24 16:29:35 +02:00
04fc98f834
de0nano/ulx3s: add sdram HalfRate support (untested).
2020-07-24 16:12:46 +02:00
d0ca1befa6
targets/de10nano/minispartan6: simplify HalfRate support, rename argument to sdram_rate.
2020-07-24 16:11:57 +02:00
9730c6f722
platforms/de10nano: use additional sdram constraints required for HalfRate.
2020-07-24 12:27:36 +02:00
7399d13cef
paltforms/de10nano/sdram: enable fast input/output on dq.
2020-07-24 11:27:25 +02:00
b4b1ab8621
paltforms/de10nano: simplify IO constraints (for consistency with others platforms).
2020-07-24 09:03:35 +02:00
89c5bf43cf
Merge pull request #92 from rob-ng15/master
...
Enable use of HalfRateGENSDRPHY on de10nano
2020-07-24 08:49:09 +02:00
1e1589a514
zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000).
...
This uses a pre-generated .xci hosted on github, still need to figure out where the best location for it.
2020-07-23 17:45:21 +02:00
7cda143250
Allow use of HalfRateGENSDRPHY
2020-07-23 14:41:35 +01:00
cf9839307f
Add Misc
...
Add Misc("") arguments to various inputs/outputs for stability. Allows de10nano to use HalfRateGENSDRPHY for sdram
2020-07-23 14:40:04 +01:00
8a3b453e2f
add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB.
2020-07-23 15:26:22 +02:00
e723bef49a
platforms/arty: add usb_uart_pmod_io (USB-UART PMOD on JA) to ease debug with a second UART (for UARTbone/LiteScope).
...
Also use pmod connector names in i2s_pmod and sdcard_pmod.
2020-07-22 14:41:09 +02:00
19d0b95867
platforms/targets: keep in sync with litex.
2020-07-22 08:53:49 +02:00
0ee4b215b9
trellisboard/ulx3s: fix sdcard slewrate.
2020-07-21 15:23:08 +02:00
7efa1c37a1
platforms/arty: add missing pullups on sdcard.
2020-07-21 15:22:39 +02:00
2ce24df76d
platforms/genesys2: add internal_vref to 0.750v on bank 34 (DDR3).
2020-07-18 22:18:41 +02:00
135c387155
platforms/ulx3s: add assertion for supported devices.
2020-07-17 12:04:06 +02:00
851378f0a9
platforms/trellisboard: move ddram_vtt_en.
2020-07-17 12:03:37 +02:00
165f9eacde
Merge pull request #91 from antmicro/jboc/gensdrphy
...
targets/minispartan6: add support for HalfRateGENSDRPHY
2020-07-15 08:22:57 +02:00
02f53e6326
targets/minispartan6: add support for HalfRateGENSDRPHY
2020-07-14 11:01:09 +02:00
44ad902aad
platforms/kc705.py: LPC DP0_M2C/C2M diff pair
2020-07-13 10:26:17 -07:00
a461f5ac59
orangecrab: add usb, rst_n signals for r0.1
...
- fix standard io extensions
- Use newly assigned code for orangecrab 1209:5af0
2020-07-09 19:56:32 +09:30
f3d02d8fca
Merge pull request #87 from antmicro/arty_i2s
...
arty: Add configuration of I2S pins
2020-07-07 17:22:10 +02:00
df54b93db3
arty: Add configuration of I2S pins
2020-07-07 15:25:10 +02:00
d9595a317e
targets/orangecrab: use user_btn as rst_n.
2020-07-06 17:49:05 +02:00
40fbbbbebc
platforms/orangecrab: add sdcard pins on r0_2.
2020-07-06 17:48:48 +02:00
7b1bf9d74a
targets: remove sdcard specific clock domain (now generated by the PHY).
2020-07-03 20:09:30 +02:00
31e6997e70
sdcard: rename cd_sdcard to cd_sd to avoid unnecessary clock domain.
2020-07-01 12:58:48 +02:00
fe3ea805bc
targets/pcie: make pcie optional (--with-pcie) and avoid forcing uart to crossover.
2020-06-30 18:44:00 +02:00
7a48a61605
targets: add indentifier on all targets.
2020-06-30 18:11:04 +02:00
fc22e28fe9
targets: replace PCIeSoC with BaseSoC.
2020-06-30 17:41:57 +02:00
d28a0c4258
targets/pcie: remove DNA/XADC/ICAP that were only on PCIe targets.
...
DNA/XADC/ICAP are demonstrated in LitePCIe repository and should probably be added with
a add_xy method.
2020-06-30 17:37:24 +02:00
e91a5d6b82
targets/pcie: remove soft reset.
2020-06-30 17:28:13 +02:00
1356ebb416
targets/ecp5: update clocking on boards with DDR3 to use reset from ddrphy.init and use primary clock for Power on reset.
2020-06-29 16:42:53 +02:00
49973990f3
Merge pull request #85 from oskirby/logicbone
...
Add Logicbone ECP5 board
2020-06-29 16:24:15 +02:00
76a32ba8ec
Add Logicbone ECP5 board
...
The Logicbone is an Open Source development board for the Lattice ECP5
being developed at https://github.com/oskirby/logicbone
2020-06-27 03:32:47 -07:00
efe33c9764
targets/arty: add fixed sdcard clock and remove sys2x (use NETWORKING interface_type on DDR3).
2020-06-25 11:21:24 +02:00
6753a92296
targets: add fixed sdcard clock on boards with SDCard support.
2020-06-25 11:20:38 +02:00
782c856619
platforms/genesys2: add usb_fifo.
2020-06-23 18:02:53 +02:00
936ba5b279
platforms/genesys2: add openocd specific configuration (channel 1 used for JTAG).
2020-06-23 11:55:50 +02:00
55ed9fbf02
platforms/kcu105: add sdcard/spisdcard.
2020-06-23 11:44:40 +02:00
eee00ebd0a
platforms/genesys2: add sdcard/spisdcard.
2020-06-23 11:44:26 +02:00
6568c8a3ae
platforms/netv2: add spisdcard.
2020-06-23 11:44:10 +02:00
7de7c4be5c
platforms/kc705: rename mmc to sdcard and make it similar to other boards.
2020-06-23 10:56:31 +02:00
0ecb8609b3
platform/arty: also update spisdcard.
2020-06-16 20:15:12 +02:00
7a8b0b743d
platforms/pano_logic_g2: -x.
2020-06-16 19:53:46 +02:00
f70655d1ac
Change sdcard Pmod from JB to JD
...
Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
2020-06-15 12:01:46 +02:00
04f6d4463a
versa_ecp5: simplify device (LFE5UM5G or LFE5UM) and adapt integrated_rom_size only for Microwatt.
2020-06-13 11:17:05 +02:00
90092164c8
Add device option for ECP5 Versa board
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
b1be5dcc23
Fix FTBFS from undersized BIOS ROM region with Microwatt
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
9b45ec0f35
de10lite: simplify vga terminal.
2020-06-11 19:59:32 +02:00
85cac7abc0
de10nano/Mister: review/simplify.
2020-06-11 19:54:55 +02:00
64372d7876
targets/orangecrab: add spi-sdcard and workaround for ValentyUSB.
2020-06-11 19:21:44 +02:00
c94cbae0c0
orangecrab: add user_led (RGB leds), DFUProg and --load support.
2020-06-11 19:21:40 +02:00
9aea2272eb
Merge pull request #80 from rob-ng15/master
...
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-11 18:16:18 +02:00
45bd50b000
targets: rename colorlight_5a_75b to colorlight_5a_75x (since we are now also supporting the 75e).
2020-06-10 23:14:37 +02:00
ad1693a1ad
Merge pull request #82 from Disasm/colorlight-5a-75e
...
Add Colorlight 5A-75E V7.1 board
2020-06-10 23:09:26 +02:00
b312c65eb9
Merge pull request #81 from Disasm/fix-5a-75b
...
Update J4 pin 5 on Colorlight 5A-75B V7.0
2020-06-10 23:07:33 +02:00
94861bbb9a
targets/orangecrab: uncomment MT41K512M16.
2020-06-10 19:30:07 +02:00
b6df166f5a
platforms/arty: add spisdcard to _sdcard_pmod_io.
2020-06-10 17:38:16 +02:00
00c8e40d02
platforms/ulx3s: add sdcard pins.
2020-06-10 17:37:50 +02:00
0c590abf12
Update colorlight_5a_75b target: add 5A-75E board support
2020-06-10 03:20:32 +03:00
1acdb962a5
Add 5A-75E V7.1 board
2020-06-10 03:07:20 +03:00
939f05fea4
Update J4 pin 5 on Colorlight 5A-75B V7.0
2020-06-10 02:49:18 +03:00
485c242f24
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-08 11:05:58 +01:00
e52d6aca5f
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-08 11:05:36 +01:00
f9a8edb973
targets/trellisboard: add initial LiteSDCard support
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-06-03 13:41:57 -04:00
d87a11a9cb
targets/pcie: use generate_litepcie_software on all targets with PCIe.
2020-06-03 08:30:54 +02:00
9f83b6e3cf
targets/acorn_cle_215: use new generate_litepcie_software functions and add --driver argument to generate driver.
2020-06-03 08:20:43 +02:00
091ec846a1
targets/acorn_cle_215: automatically copy software from litepcie and generate headers in kernel directory.
2020-06-02 20:09:45 +02:00
06edf48897
targets: rename gateware-toolchain parameter to toolchain.
2020-06-02 13:45:05 +02:00
0b11aba8a1
platforms/nexys_video: add spisdcard pins.
2020-05-29 19:37:04 +02:00
76df4e39c8
targets: simplify Ethernet/Etherbone integration on targets with both.
2020-05-29 19:20:27 +02:00
2e1a816d1f
pano_logic_g2: switch to LiteEthPHY and simplify Ethernet/Etherbone.
2020-05-29 10:41:35 +02:00
33fe308ef0
Merge pull request #78 from antmicro/jboc/spd-read
...
ZCU104: add I2C
2020-05-27 14:56:31 +02:00
e5578a1ae8
zcu104/platform: change I2C number to 0
2020-05-27 14:31:22 +02:00
ac1f1cd6a7
zcu104: add I2C
2020-05-27 12:47:43 +02:00
71f220a24d
colorlight_5a_75b: remove unnecessary parenthesis.
2020-05-27 10:13:44 +02:00
2f3817cba9
pano_logic_g2: add ethernet (build but not functional yet) and use user_btn_n as sys_rst.
2020-05-27 10:13:12 +02:00
f19bc36813
pano_logic_g2: add revision support (b and c, c as default) and add OpenOCD programmer.
...
Tested with:
./pano_logic_g2.py --uart-name=jtag_uart --build --load
./litex_jtag_uart.py --config=openocd_xc6_ft232.cfg
lxterm /dev/pts/X
2020-05-27 08:58:40 +02:00
d6518c7dc2
prog/openocd: fix openocd_xc6 cfgs.
2020-05-27 08:48:16 +02:00
22f18f618e
pano_logic_g2: move gmii_rst_n to _CRG.
2020-05-26 08:36:06 +02:00
0648c04158
Updated comment, added link to clocking documentation.
2020-05-25 14:48:24 -07:00
1ab46562bd
Take Ethernet PHY out of reset so default clock is 125 Mhz (and baud rate is 115,200)
2020-05-25 10:11:03 -07:00
9b572ece0e
forest_kitten_33: add minimal target and use es1.
...
Tested with:
./forest_kitten_33.py --uart-name=jtag_uart --build --load
litex/tools/litex_jtag_uart.py
lxterm /dev/pts/X
2020-05-25 12:26:52 +02:00
435913f7d8
platforms/nexys4ddr: add option to build with spi-mode sdcard support
2020-05-24 19:09:25 -04:00
0d549a8c89
platforms: add forest_kitten_33 initial platform suppport.
2020-05-24 11:22:02 +02:00
12b54a7a7f
platforms/alveo_u250: add clk300 clock constraints.
2020-05-24 11:18:30 +02:00
46f78b5002
nexys_video: add usb_fifo pins.
2020-05-22 14:28:55 +02:00
445338e2e7
platforms/nexys_video: add specific openocd cfg (use channel 1).
2020-05-22 14:12:45 +02:00
5aeb7d85e6
targets/acorn_cle_215: fix typo in description.
2020-05-21 10:18:06 +02:00
eeba64d7b2
targets: use soc.build_name in load/flash bitstream.
2020-05-21 09:12:29 +02:00
76551dec4c
platforms/nexys_video: add sdcard pins, move clk/rst to top.
2020-05-20 13:05:18 +02:00
83457b8791
platforms/arty: add _sdcard_pmod_io.
2020-05-20 12:09:43 +02:00
8158d94ae7
targets/c10lprefkit: switch to litehyperbus.
2020-05-19 15:48:19 +02:00
587caf7584
paltforms/marblemini: add break_off_pmod.
2020-05-19 15:42:53 +02:00
c2cd863658
platforms/ecp5_evn: rename spiflash1x to spiflash, rewrite hardware/configuration description and remove make_spiflash.
...
The Platform file should not contain import code related to cores, this has to be done in the target.
2020-05-19 15:29:25 +02:00
3f0f12011b
Merge pull request #70 from ilya-epifanov/ecp5-evn-spi1x-and-flash-params
...
ECP5-EVN SpiFlash parameters
2020-05-19 15:16:25 +02:00
b9ee3a797a
alveo_u250: re-organize the auto-generated IOs, add build/load parameters.
2020-05-16 11:47:14 +02:00
c0b7afc739
targets/alveo_u250: +x.
2020-05-16 11:13:01 +02:00
67d2a4940e
tools/extract_xdc_pins: +x.
2020-05-16 11:12:46 +02:00
482d7a6b95
targets/pcie: use 128-bit datapath and 8 max_pending_requests on pcie_x4 configurations.
2020-05-14 15:34:00 +02:00
2bb7fce5e3
targets/acorn_cle_215: add minimal instructions to reproduce the results.
2020-05-13 17:55:52 +02:00
6757c4e298
Merge pull request #71 from daveshah1/alveo_u250
...
[WIP] Add Alveo U250 platform and target
2020-05-13 09:10:22 +02:00
c7404e356f
targets/acorn_cle_215: switch to MT41K512M16 (Acorn has a 1GB DDR3 vs 512MB on NiteFury).
2020-05-09 16:39:17 +02:00
d05b10fd76
target/camlink_4k: add missing import.
2020-05-09 12:27:07 +02:00
4faa91c7f2
platforms/marblemini: review/cleanup.
...
- add copyrights.
- add link to documentation.
- reindent code.
- rename some IOs (for consistency with the others platforms).
- add pullup on clk20_vcxo_en.
- set clk20_vcxo as default clock.
- remove ununnecessary eth constraints. (we are using IO primitives).
- move PMODS to connectors (for consistency with others platforms).
2020-05-09 10:16:42 +02:00
4ffdcb5ea9
Merge pull request #75 from jersey99/marblemini
...
Marblemini [https://github.com/berkeleylab/marble-mini/ ]
2020-05-09 09:39:40 +02:00
e4ccfcfad1
platforms/marblemini.py: Cleanup. Add openocd for programming marblemini
2020-05-08 17:20:14 -07:00
6f22f082ff
targets: add LedChaser on platforms with user_leds.
...
Default to Chaser mode and similar user interface than GPIOOut.
2020-05-08 22:16:13 +02:00
b9a0f2363c
Merge pull request #74 from tommythorn/master
...
targets/orangecrab.py: propagate command arguments
2020-05-08 07:28:05 +02:00
a7d6de78ae
Merge branch 'master' into marblemini
2020-05-07 12:19:47 -07:00
5f7f087cba
community/platforms/marblemini.py: Added marblemini from https://github.com/berkeleylab/marble-mini/
2020-05-07 12:17:42 -07:00
19b12fd984
targets/panol_logic_g2: replace with a minimal target.
2020-05-07 16:36:04 +02:00
99c04358bf
platforms/pano_logic_g2: simplify/cleanup.
2020-05-07 16:35:34 +02:00
6b5492a707
pano_logic_g2: add copyrights.
2020-05-07 15:24:03 +02:00
6ddd859309
add pano_logic_g2 from litex-buildenv.
2020-05-07 15:22:22 +02:00
27c242b2ca
targets/pcie: switch to PCIe X4 on all boards that support it.
2020-05-07 12:18:39 +02:00
f9939532b6
targets/pcie: update LitePCIe constraints.
2020-05-07 12:15:52 +02:00
6335717eca
targets/orangecrab.py: propagate command arguments
...
The parsed args are stripped off by soc_core_argdict() (called from
soc_sdram_argdict() so we have to pass them explicitly (or pass the
original "args", but this mimics the rest of the code in the repo).
This fixes #72
2020-05-06 18:24:11 -07:00
d34c3baf15
prog: use different openocd config files for FT232/FT2232.
2020-05-06 16:14:51 +02:00
117d1a1c75
prog: add colorlight_5a_75b openocd config.
2020-05-06 16:01:59 +02:00
e500d90bcc
platforms/ecpix5: set pullups on rx_data to advertise as RGMII mode.
2020-05-06 16:00:46 +02:00
59e8c2cd30
acorn_cle_215: add .bin generation and --flash argument, working on hardware :).
2020-05-06 12:27:07 +02:00
a049fa6856
add Acorn CLE 215+ platform/target.
2020-05-06 07:53:55 +02:00
da61aabc5b
targets: remove USDDRPHY_DEBUG and set cmd_latency to on all Kintex7/Ultrascale targets.
2020-05-05 16:32:10 +02:00
b58b9b9e6a
platforms: fix CI.
2020-05-05 16:01:43 +02:00
2d9543b65e
targets: add build/load parameters on all targets.
2020-05-05 15:11:47 +02:00
19eb5708de
platforms: make sure all traditional platforms have a create_programmer method.
2020-05-05 13:34:57 +02:00
84468c2a63
targets/CRG: platforms are now automatically constraining the input clocks.
2020-05-05 11:51:57 +02:00
1f88a9d5ec
platforms: make sure clocks inputs are constraints on all platforms.
...
Also use new loose lookup_request to simplify constraints.
2020-05-05 11:45:41 +02:00
86648ec7d8
platforms/vcu118: rename ddram_second_channel to ddram:1.
2020-05-05 09:54:11 +02:00
e1820c7831
platforms/ac701: indent HPC.
2020-05-05 09:49:59 +02:00
2129b67779
platforms: make sure all plarforms have separators.
2020-05-05 09:47:55 +02:00
ea0eda9f75
platforms: make sure all Xilinx/Altera platforms have a create_programmer method, use OpenOCD on Spartan6 and 7-Series.
2020-05-05 09:42:34 +02:00
588bbac719
add prog directory with some Xilinx OpenOCD configurations files.
2020-05-05 09:11:06 +02:00
78b5727774
targets: rename usb_cdc to usb_acm.
...
As discussed recently on Discord.
2020-04-30 21:48:10 +02:00
088cceca8b
Add Alveo U250 platform and target
...
Signed-off-by: David Shah <dave@ds0.me>
2020-04-29 12:31:16 +01:00
0ba8045789
Added spiflash1x pins, a method to create an SpiFlash instance and a note on a second UART channel of FT2232H
2020-04-28 21:56:33 +02:00
2213d73b89
targets/kcu105: use cmd_latency=1.
2020-04-25 12:13:49 +02:00
a8a42c55c9
targets/kc705: manual DDRPHY_CMD_DELAY adjustment no longer needed.
2020-04-25 11:08:05 +02:00
865b01ec75
ecpix5: add ethernet.
2020-04-22 20:21:59 +02:00
6fe4c4ea62
ecpix5: add DDR3 (working)
2020-04-22 17:03:22 +02:00
efb13bc118
add mininal ECPIX-5 board support (Clk/Rst/Leds/UART), BIOS working.
2020-04-22 16:31:07 +02:00
4154bdf034
targets/PCIe: add PCIe software reset.
2020-04-20 12:30:09 +02:00
4ad6042e07
platforms/de0nano: swap serial tx/rx to ease use of cheap FT232 based cables.
2020-04-18 11:36:18 +02:00
4185a019f5
targets: manual define of the SDRAM PHY is no longer needed.
2020-04-16 11:25:59 +02:00
cb95962850
targets/ulx3s and colorlight_5a_75b: cleanup USB ACM addition and only keep USB ACM changes.
...
- remove update in loading/flashing: we need to thinks how to integrate this.
- remove specific README: documentation is moved to the files, link to more complete project can
be added if maintained externally, as done for the iCEBreaker for example.
- revert default freq on ULX3S to 50MHz and instantiate a second PLL as done on the colorlight.
2020-04-14 16:14:18 +02:00
f79a010a29
Addition of flash for colorlight board
2020-04-14 14:37:56 +01:00
389e8aa13a
Addition of USB ACM for ECP5
2020-04-14 13:53:46 +01:00
a12faae0fb
targets/colorlight_5a_75b: increase sys_ps phase (fixes memtest).
2020-04-14 11:24:16 +02:00
52c9648176
arty_s7: fix copyrights, rename to arty_s7, various minor changes to make it similar to others targets.
2020-04-13 15:20:36 +02:00
bbb1ded9f8
Added Arty S7 board
...
As the pin-out is totally different from the A7 board I did put this
in a separate class and not as a variant of the Arty board.
Used migen Arty S7 board file and Digilent xdc file as reference.
2020-04-12 21:48:25 +02:00
188d4a45d6
targets: use DDROutput on sdram_clock and similar configuration for all SDRAM targets.
2020-04-10 14:43:04 +02:00
ca197af2be
targets/simple: use CRG from litex.build.
2020-04-10 10:26:19 +02:00
b8a648d499
litex.build: update from migen.genlib.io litex.build.io.
2020-04-10 09:23:33 +02:00
4d7135f167
platforms/versa_ecp5: remove LatticeProgrammer (no longer used since we can now use OpenOCD).
2020-04-09 23:06:57 +02:00
2cf3c3e845
platforms: cosmetic cleanups.
2020-04-09 23:05:13 +02:00
df5de8816d
platforms/ulx3s: cleanup, fix user_leds, add PULLMODE/DRIVE constraints on SDRAM.
2020-04-09 18:53:06 +02:00
467b14a0ad
colorlight_5a_75b: minor comment changes.
2020-04-09 08:14:17 +02:00
15a27d40fa
targets/colorlight_5a_75b: Change baudrate to work on v6.1
...
There seems to be some capacitance on KEY+, so the usual 115200 don't work
2020-04-09 05:08:23 +02:00
4fc9df8414
colorlight_5a_75b/v6.1: Add eth_clock & serial pins
2020-04-09 05:06:08 +02:00
4ddde31429
colorlight_5a_75b/v6.1: Fix bank activate pin
2020-04-09 05:05:29 +02:00
9b3f16af1e
Merge pull request #62 from ilya-epifanov/ecp5-evn-button1-and-spi-flash-ios
...
ECP5-EVN board: Added BUTTON_1 and SPI flash pins to IOs
2020-04-08 09:00:12 +02:00
db67dff0ea
targets/de10lite: use Max10PLL, remove 50MHz limitation.
2020-04-08 08:55:30 +02:00
8ccab03358
targets/c10lprefkit: use Cyclone10LPPLL, remove 50MHz limitation.
2020-04-08 08:34:59 +02:00
4cdc121327
targets/de10nano: use CycloneVPLL, remove 50MHz limitation.
2020-04-08 08:11:04 +02:00
2d8a4ef9ec
targets/de1_soc: use CycloneVPLL, remove 50MHz limitation.
2020-04-08 08:07:37 +02:00
cec4cbb6dc
targets/de2_115: use CycloneIVPLL, remove 50MHz limitation.
2020-04-08 08:03:41 +02:00
1fac6077fb
targets/de0nano: use CycloneIVPLL, remove 50MHz limitation.
2020-04-07 17:01:58 +02:00
5f629c203b
targets/vcu118: fix clk500 typo.
2020-04-07 13:53:22 +02:00
a7fbe0a724
colorlight_5a_75b: add SoC with regular UART (on J19).
2020-04-03 10:28:53 +02:00
19e5366ad1
targets/colorlight_5a_75b: update sys/sys_ps phases.
2020-03-31 18:18:45 +02:00
9ae8a0cc11
colorlight_5a_75b/v7.0: add spiflash pins.
2020-03-31 16:18:12 +02:00
a43072ac40
ECP5-EVN board: Added BUTTON_1 and SPI flash pins to IOs
2020-03-28 13:08:46 +01:00
ccfc021c1a
Merge pull request #61 from ilya-epifanov/ecp5-evn-programming
...
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 12:59:19 +01:00
8afc9a5b03
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 11:27:34 +01:00
89dd00d3a2
platforms/aller: rename pcie to pcie_x4 (for consistency with others platforms).
2020-03-27 13:01:36 +01:00
d2edf54ab3
zcu104: add fully working SO-DIMM config
2020-03-26 16:37:11 +01:00
3b91e96c42
targets/add_constant: avoid specifying value when value is None (=default)
2020-03-26 09:47:22 +01:00
555bf6c4dc
targets/Ultrascale(+): enable USDDRPHY_DEBUG.
2020-03-26 09:17:09 +01:00
4053c02d7e
targets/orangecrab: add USB PLL for USB CDC with ValentyUSB.
2020-03-25 19:38:36 +01:00
85f38876c2
targets: update PCIe on Numato targets.
...
Should be compatible with software from: https://github.com/enjoy-digital/netv2 .
2020-03-25 11:53:52 +01:00
6e6b6dac55
platforms/orangecrab: add spisdcard pins.
2020-03-25 10:21:57 +01:00
87fd4dc059
platforms/minispartan6: add spisdcard pins.
2020-03-25 09:53:04 +01:00
24033e331c
targets: update SDRAM to use new GENSDRPHY and new ECP5PLL phase support.
2020-03-24 19:59:42 +01:00
92f793f9c5
platforms: remove versa_ecp3 (ECP3 no longer supported).
2020-03-24 19:58:12 +01:00
eb35ec92ba
orangecrab: combine revisions in target
2020-03-23 09:20:01 +10:30
159360da2c
orangecrab: Add r0.2 support
2020-03-22 21:04:07 +10:30
bf3c9dc9bf
orangecrab: Add sdram selection option
2020-03-22 20:41:12 +10:30
88d3f1d63e
orangecrab: r0.1 OrangeCrab fixes
2020-03-22 20:14:29 +10:30
78224b1e56
targets/colorlight_5a_75b: add SDRAM.
2020-03-21 22:11:47 +01:00
a95a4eed3f
targets/colorlight_5a_75b: switch to add_ethernet/add_etherbone methods.
2020-03-21 21:50:05 +01:00
7bba5caab0
targets/c10prefkit: remove keep attributes (no longer needed, added automatically).
2020-03-21 21:44:44 +01:00
6c31933e89
targets: switch to add_etherbone method.
2020-03-21 21:40:45 +01:00
159386e3d3
targets: always use sys_clk_freq on SDRAM modules.
2020-03-21 20:00:56 +01:00
3fb3ba18e8
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-21 18:29:52 +01:00
83e6fb29f8
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-21 12:43:39 +01:00
33bf1d3ee2
Merge pull request #58 from gsomlo/gls-trellisboard-spisdcard
...
Move trellisboard target to SoCCore, add SPI-mode SDCard support
2020-03-20 19:07:00 +01:00
fb1cab857a
targets/arty: use new ISERDESE2 MEMORY mode.
2020-03-20 18:59:17 +01:00
f021c1de5f
targets/trellisboard: add '--with-spi-sdcard' build option
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-20 07:14:13 -04:00
69a78c8c66
targets/trellisboard: switch to SoCCore, use add_ethernet() method
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
396b0383c8
platforms/trellisboard: fix "sdcard" pads, add "spisdcard" pads
...
Add support for SPI-mode SDCard interface. Also, add pull-up and
slew constraints to the standard sdcard interface.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
d0d047dfa4
platforms/ulx3s: add spisdcard pins.
2020-03-19 15:14:05 +01:00
6ab13a0661
de10nano/MiSTer: rename SPI SD CARD pins to spisdcard and remove SPI SD Card integration from target.
2020-03-19 11:09:48 +01:00
db9d5489ec
Merge pull request #56 from rob-ng15/master
...
de10nano add in support for MiSTer secondary sd card
2020-03-19 11:07:40 +01:00
57bcadb5b4
platforms/nexys4ddr: add spisdcard pins.
2020-03-19 11:04:11 +01:00
f3d7f5880f
platforms/kcu105: fix pcie tx0 p/n swap.
2020-03-18 19:09:52 +01:00
bc6ef0bc48
Allow access to secondary sd card via hardware spi bitbanging
2020-03-18 12:13:37 +00:00
a6f80694cb
Add in support for secondary sd card via spi hardware bitbanging
2020-03-18 12:11:57 +00:00
a99d258411
targets/icebreaker: use simplified version closer to the others targets.
...
Add description of the board, link to the crowdsupply campaign and to the more complete example.
2020-03-13 09:43:43 +01:00
74a5ffb9ef
targets/Ultrascale+: use 500MHz IDELAYCTRL reference clock.
...
The minimum is 300MHz on Ultrascale+ vs 200MHz on Ultrascale.
2020-03-10 16:58:30 +01:00
e2a66090ee
targets/Ultrascale(+): simplify CRG using USIDELAYCTRL.
2020-03-10 16:55:22 +01:00
cf58550bba
targets/Ultrascale+: use USPDDRPHY.
2020-03-10 16:06:48 +01:00
ce922613a7
Merge pull request #55 from antmicro/jboc/mercury-xu5
...
platforms/mercury_xu5: fix sdram timing issues
2020-03-10 15:30:12 +01:00
90de99eb46
platforms/mercury_xu5: fix sdram timing issues
2020-03-10 15:03:31 +01:00
75286f8a9b
platforms/zcu104: add missing INTERNAL_VREF on bank 64 (DQ0-31)
2020-03-10 14:57:39 +01:00
95e1a05bf1
platforms/Ultrascale: avoid unnecessary {{}} on INTERNAL_VREF.
2020-03-09 09:29:49 +01:00
3f191c8561
mercury_xu5: set INTERNAL_VREF to 0.84. (similar to others Ultrascale boards with DDR4).
2020-03-09 09:28:25 +01:00
f4ae21a7a2
zcu104: fix copyrights.
2020-03-09 09:24:06 +01:00
5031c11d57
mercury_xu5: add missing copyrights.
2020-03-09 09:23:08 +01:00
8c535d15f2
platforms/mercury_xu5: replace ' with ".
2020-03-09 09:21:27 +01:00
dc1371108d
Merge pull request #52 from antmicro/jboc/mercury-xu5
...
add Enclustra Mercury XU5 board
2020-03-09 09:11:15 +01:00
2b1b9684de
targets/icebreaker: simplify CRG, just use a 12MHz sys_clk and por_clk for reset.
2020-03-07 18:25:26 +01:00
9416ddd84a
targets/icebreaker: simplify arguments and make it closer to others targets.
2020-03-07 18:13:02 +01:00
992f7066fa
targets/icebreaker: simplify leds.
2020-03-07 18:12:59 +01:00
682316214c
targets/icebreaker: use specific method to set Yosys/Nextpnr settings. Rename argument to nextpnr-xxyy.
2020-03-07 18:12:52 +01:00
f777d4b08c
targets/icebreaker: +x
2020-03-05 23:11:35 +01:00
6f517ad1d6
targets/ecp5: make sure all BaseSoC/EthernetSoc default to trellis.
2020-03-05 10:57:59 +01:00
d002059e0b
add Enclustra Mercury XU5 board
2020-03-05 10:52:32 +01:00
745c99ba14
icebreaker: Updated to build on newer litex. Disabled bios building.
2020-03-05 00:12:18 -08:00
3ac9d927a9
targets: icebreaker: Minor style fixes.
2020-03-05 00:12:18 -08:00
738967176c
targets: icebreaker: set the boot address to point to SPI flash
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
093e4913c4
targets: icebreaker: hack to get boot working
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
77b780eb4b
targets: icebreaker: switch to single SPI
...
The Icebreaker doesn't have the QE/ bit set in config, so default to
using single SPI.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
e6dcdc31ed
targets: icebreaker: fix cpu and add spi flash
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
0185095782
targets: icebreaker: fix argument parsing for cpu
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
f0dd31f6c8
target: targets: add crg and begin getting it working
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-05 00:12:18 -08:00
ce9b67e2ee
Added icebreaker platform and target.
...
Target is heavily based on Fomu.
2020-03-05 00:12:18 -08:00
7b4ca20ff4
platforms.colorlight_5a_75b: add J1-J8 connectors
2020-02-28 06:09:44 -08:00
be5ed35871
targets: default to trellis toolchain on all ECP5 targets (now able to build all supported targets).
2020-02-28 09:46:54 +01:00
b44885d222
vc707: fix copyrights (Michael Betz is the initial author)
2020-02-28 08:39:52 +01:00
b89af28a05
targets/kc705: use DDRPHY_CMD_DELAY to center write leveling.
2020-02-27 12:58:52 +01:00
aaa10c69eb
platforms/colorlight_5a_75b: add default_clk_name/period
2020-02-27 11:16:49 +01:00
d8de4fbdfb
platforms/targets: keep in sync with LiteX
2020-02-27 11:06:53 +01:00
18f65a7f9d
platforms/kc705: cleanup ddram.
2020-02-27 11:06:35 +01:00
d4460c11a5
platforms/kcu105/vcu118: remove PRE_EMPHASIS/EQUALIZATION on dm.
2020-02-27 10:43:41 +01:00
58f588f69e
platforms/zcu104/ddram: add PRE_EMPHASIS/EQUALIZATION settings
2020-02-27 10:43:01 +01:00
d87b8b3c66
zcu104: add separate ddram_32/64 definitions and use ddram_32 for now.
...
Ease switching between ddram_32 and ddram_64.
2020-02-27 10:05:17 +01:00
8ecfb13f3c
zcu104: add copyrights
2020-02-27 09:57:26 +01:00
22b0449509
Merge pull request #47 from antmicro/zcu104
...
Add support for ZCU104 board
2020-02-27 09:51:54 +01:00
608541d5b8
add ZCU104 board
2020-02-26 13:53:21 +01:00
e516ff3452
vcu118/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:51 +01:00
9d2ca50c5f
kcu105/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:35 +01:00
83d2c71099
platforms/vcu118: add missing Internal Vref configuration on DDR4 C1/C2 banks
2020-02-25 18:32:42 +01:00
4a84e9b08a
targets/colorlight_5a_75b: add instruction to build/load and use bitstream with wishbone-tool
2020-02-25 12:47:08 +01:00
f279fe9d33
vc707: cleanup platform/targets, remove Ethernet support (no Ethernet pads defined)
2020-02-25 10:35:18 +01:00
3581df5af6
vc707: cleanup platform/targets, remove Ethernet support (SGMII is not currently supported)
2020-02-25 09:41:53 +01:00
88a1f80db1
vc707/vcu118: use proper copyrights
2020-02-25 09:03:52 +01:00
373e74f435
add new board files for VC707 and VCU118, only specified limited ports for VCU118, including clock, reset and DDR4
2020-02-24 14:20:47 -05:00
2cf4e084ec
platforms/colorlight_5a_75b.py: fix sdram_clock and sdram a pins
2020-02-23 10:01:41 +01:00
f72e7bd314
Merge pull request #41 from lromor/fix-wrong-import
...
Changed wrong imports for fomu board.
2020-02-12 18:48:13 +07:00
ec30cc05c3
Changed wrong imports for fomu board.
2020-02-12 12:40:07 +01:00
c94360c2e0
targets: avoid direct use of mem_decoder.
2020-02-11 21:59:42 +01:00
4edf196911
targets/EthernetSoC: be sure memory region is added before adding Wishbone Slave (required by new SoC)
2020-02-11 17:45:35 +01:00
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00
7a24406b2e
targets: fomu: fix compatibility for when a cpu is added
...
Things weren't quite right for adding a CPU. This fixes that by
correcting the placer arguments, memory map, and USB type.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-02-03 08:58:54 +08:00
0627f55dca
de10nano: cleanup a bit, rename SDRAMSoC to MiSTerSDRAMSoC and argument to --with-mister-sdram to make it clear that it's using the MiSTer SDRAM extension board.
2020-01-31 09:29:02 +01:00
cf9a9ff91b
de10nano: update copyrights, remove trailing whitespaces
2020-01-31 09:13:36 +01:00
36e1f1fe75
rename sw to user_sw
2020-01-30 05:01:46 -08:00
1631b071c3
finish up sdram, passes memtest
2020-01-30 03:41:44 -08:00
5091a1b40a
WIP sdram module option
2020-01-29 13:59:57 -08:00
3a6a9258ce
add de10 nano board
...
add iostandard to hdmi
2020-01-29 00:21:51 -08:00
2ec6bc0bdc
colorlight_5a_75b: add disclaimer
2020-01-23 14:13:13 +01:00
55c0b781e4
colorlight_5a_75b: revert rx_delay to 2ns, improve comment (thanks @tnt)
2020-01-23 13:16:36 +01:00
4fb89fc9c5
colorlight_5a_75b: set RGMII tx/rx_delay to 0ns in the FPGA (added by PCB/PHY)
2020-01-23 09:39:48 +01:00
dcc65b347d
targets/colorlight_5a_75b: switch to SoCCore, CPU and Etherbone working :)
...
Tested with:
./colorlight_5a_75b.py --cpu-type=picorv32 --uart-name=crossover --with-etherbone --csr-csv=csr.csv
Load with following script:
#!/usr/bin/env python3
# Load ---------------------------------------------------------------------------------------------
def load():
import os
f = open("openocd.cfg", "w")
f.write(
"""
interface ftdi
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0098 0x008b
reset_config none
adapter_khz 25000
jtag newtap ecp5 tap -irlen 8 -expected-id 0x41111043
""")
f.close()
os.system("openocd -f openocd.cfg -c \"transport select jtag; init; svf soc_etherbonesoc_colorlight_5a_75b/gateware/top.svf; exit\"")
exit()
if __name__ == "__main__":
load()
Then start lxserver:
lxserver --udp
And run following script:
#!/usr/bin/env python3
import sys
from litex import RemoteClient
wb = RemoteClient()
wb.open()
# # #
while True:
if wb.regs.uart_xover_rxempty.read() == 0:
print(chr(wb.regs.uart_xover_rxtx.read()), end="")
sys.stdout.flush()
# # #
wb.close()
2020-01-22 15:57:52 +01:00
c07e4a6b3a
colorlight_5a_75b: fix rst_n
2020-01-22 14:57:48 +01:00
8da8ed7a0e
colorlight_5a_75b/v7.0: update eth_clocks/rx pinout, remove FIXME
2020-01-22 14:56:17 +01:00
bb805999cb
platforms/colorlight_5a_75b: fix 6.1 used_led_n/user_btn_n thanks @smunaut
2020-01-22 12:43:37 +01:00
43badd162e
colorlight_5a_75b/v6.1: add led/btn and remove FIXME on sdram now that clarified
2020-01-22 11:05:08 +01:00
1d9e349093
partner: add colorlight_5a_75b initial support
2020-01-22 09:51:00 +01:00
07067301d5
targets/linsn_rv901t: cleanup arguments
2020-01-22 09:04:28 +01:00
8113b491db
aller/nereid/tagus: update litepcie
2020-01-21 21:26:23 +01:00
684c1640bb
add Linsn RV901T support
2020-01-18 21:40:04 +01:00
0e4569a48a
platforms/camlink_4k: remove #!/usr/bin/env python3
2020-01-18 21:35:18 +01:00
e72cd1468c
platforms/ac701: fix eth indent
2020-01-18 21:34:50 +01:00
908539d49f
targets/nexys4ddr: fix typo
2020-01-17 13:15:22 +01:00
bb99a8dd0c
targets/kcu105: remove main_ram_size_limit
2020-01-17 12:09:53 +01:00
eca9bf10ae
mimas_v7: cleanup, make it similar to others boards
2020-01-16 11:24:09 +01:00
54f39b600a
mimas_a7: fix copyrights
2020-01-16 11:02:11 +01:00
8d298951a8
Merge pull request #37 from feliks-montez/master
...
Add Mimas A7 board support
2020-01-16 11:00:32 +01:00
f9619c4a8f
aller/tagus/nereid: use crossover UART, rename SoC to PCIe SoC and pass soc_sdram_argdict to PCIeSoC
2020-01-16 10:51:35 +01:00
fd1e655700
targets: cleanup EthernetSoC
2020-01-16 10:28:09 +01:00
206ec34551
platforms/mimas_a7: add support
2020-01-14 23:31:03 -05:00
9f1c3305b6
targets/mimas_a7: add support
2020-01-14 23:30:49 -05:00
50d550c911
kx2: cleanup, fix copyright
2020-01-13 17:22:33 +01:00
3811b58f32
Merge pull request #36 from Marrkson/master
...
ADD: KX2 and DDR3 support
2020-01-13 17:07:16 +01:00
c109b36fb9
travis: update/fix
2020-01-13 17:00:01 +01:00
028d4a78aa
targets: use default integrated rom/ram size passed with **kwargs from default soc_core_args
2020-01-13 15:20:37 +01:00
13e5ca03a5
ADD: KX2 and DDR3 support
2020-01-13 14:21:54 +01:00
beccf670e5
hadbadge: fix _CRG
2020-01-11 10:46:23 +01:00
15f3457aea
platforms/de0nano/serial: add gpio names in comment
2020-01-10 18:53:52 +01:00
94ba343daf
targets/ac701: cpu_reset is active high
2020-01-10 18:53:14 +01:00
ab01f70e5c
platforms/ac701: set internal vref to 0.750v on DDR3 banks, use IN_TERM=UNTUNED_SPLIT_50 on dq
2020-01-09 21:56:01 +01:00
7afe3dc674
platforms/targets: sync with litex
2020-01-09 21:10:59 +01:00
4192b20f09
targets: cleanup Altera CRGs
2020-01-09 19:46:39 +01:00
9e9fc5ef78
platforms: always use 1e9/clk_freq for default_clk_period
2020-01-09 19:28:50 +01:00
fe23881348
Merge pull request #33 from msloniewski/master
...
targets/de10lite: use external clock for sys directly
2020-01-09 19:23:55 +01:00
aaf8d54c6a
targets/de10lite: use AsyncResetSynchronizer for clock domains
...
At the start output of the pll is not stabilized, which
caused malfunctions when used for sys clock domain.
Use AsyncResetSynchronizer to start clock domains
on pll locked signal.
2020-01-09 18:47:13 +01:00
d08dfdb808
platforms/nexys4ddr: add sdcard pins (sync w. litex commit #e99740e8)
2020-01-09 09:25:19 -05:00
babbc676eb
targets: cleanup ECP5 CRGs
2020-01-09 14:24:18 +01:00
82601ff700
hadbadge: remove speed_grade workaround, now passed to trellis from device.
2020-01-08 19:44:35 +01:00
1f300bb03e
add initial camlink_4k support
2020-01-08 09:56:37 +01:00
c0e4578bea
targets/hadbadge: cleanup/simplify (keep things similar to ulx3s) and add copyrights
2020-01-07 10:29:58 +01:00
85c4f76eba
platform/hadbadge: cleanup/simplify and add copyrights
2020-01-07 10:29:01 +01:00
829898d652
Merge pull request #31 from pdp7/master
...
add the Hackaday Supercon ECP5 badge
2020-01-07 09:48:15 +01:00
ab41cf5b79
Update ecp5_evn.py
2020-01-07 01:55:59 +01:00
b3f175c064
add the Hackaday Supercon ECP5 badge
...
Add the Hackaday Supercon 2019 badge which has an ECP5 FPGA:
https://hackaday.io/project/167255-2019-hackaday-superconference-badge
These changes are from Michael Welling's fork:
https://github.com/mwelling/linux-on-litex-vexriscv
During Supercon, we trying two approaches:
- use the built-in 16MB QSPI SRAM
- use add-on cartiridge with 32MB SDRAM by Jacob Creedon
We were not able to get the QSPI SRAM working so I've removed
those changes, and I have just added the changes that are needed
to boot Linux with the 32MB SDRAM.
Thanks to Jacob Creedon, Greg Davill and Tim Ansell who helped debug.
KiCad design files for the SDRAM cartridge are available at:
https://github.com/jcreedon/dram-cart/
The SDRAM cartridge PCB is shared at:
https://oshpark.com/shared_projects/IQSl2lid
More information in this blog post:
https://blog.oshpark.com/2019/12/20/
The Hackaday Supercon badge PCB design is here:
https://github.com/Spritetm/hadbadge2019_pcb
2020-01-06 16:59:15 +01:00
f8f2301a3e
Merge pull request #30 from mithro/fomu-update
...
Updating the templates for Fomu.
2020-01-03 08:40:18 +00:00
250706b98c
Updating the templates for Fomu.
2020-01-02 13:55:09 +00:00
2b43a18a3c
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:18:56 +01:00
c96e7c8fb9
platforms/pipistrello: cleanup, remove extra stuff specific to litex-buildenv
2019-12-31 18:07:18 +01:00
2259042383
pipistrello: add copyrights
2019-12-31 17:44:24 +01:00
6324433e1c
Merge pull request #28 from zakgi/master
...
Adding initial support for Saanlima's Pipistrello LX45 board
2019-12-31 17:33:25 +01:00
980b0ebda0
targets/de10lite: rename VideoSoC to VGASoC (to avoid confusion with VideoSoC as used on Video designs with framebuffer)
2019-12-31 17:30:23 +01:00
10e5248bda
targets/de10lite: minor cleanup on import/_CRG
2019-12-31 17:26:09 +01:00
9c5a4f757f
targets/de10lite: add VideoSoC with VGA peripheral
...
Add VideoSoC build option, based on Frank Buss example.
2019-12-30 23:25:43 +01:00
cace17e162
targets/de10lite: refactor setting up clock domains
...
Use PLL to generate clock for both sys clock domain and clock domain
for sdram. Additionally set up clock domain for VGA periph.
2019-12-30 23:25:43 +01:00
9ed68d129f
platforms/de10lite: add additional configuration
...
Use single image with memory initialization
to make more space for SoC ROM sector.
2019-12-30 23:23:44 +01:00
28753a2c04
platforms/de10lite: remove UART pins from GPIO resource
...
V10 and W10 pins were used in UART periph, causing error
when gpio_0 were requested.
2019-12-30 23:06:58 +01:00
359918c2a2
Comment out template overrides for now.
2019-12-30 19:23:05 +01:00
1f32dcf662
partner: rename orange_crab to orangecrab
2019-12-30 12:07:34 +01:00
8965b01347
partner/orange_crab: cleanup, make it similar to others targets and only keep BaseSoC
2019-12-30 11:54:53 +01:00
e77afaaef0
partner: add OrangeCrab support ( https://github.com/gregdavill/OrangeCrab )
2019-12-30 11:54:45 +01:00
39e428581f
Adding initial support for Saanlima's Pipistrello LX45 board
2019-12-29 18:29:11 -08:00
48476be9e2
aller/nereid/tagus: LitePCIeWishboneBridge's shadow_base replace with base_address
2019-12-14 22:10:04 +01:00
7184032555
aller/neired/tagus: fix gateware/software build directory
2019-12-14 11:29:15 +01:00
4334ba9527
partner/aller, nereid, tagus: Remove deprecated param
...
get_csr_header parameter with_shadow_base
removed/deprecated in litex 2a8d8c8f. New default
behavior matches the desired behavior in these targets.
2019-12-14 01:04:28 +00:00
3012cf75fe
partner/aller, nereid, tagus: Use updated csr APIs
...
litex commit 8be5824e258b84df240d34636aaa539124b92c65 simplified the handling
of csr regions and constants.
2019-12-14 01:00:52 +00:00
d91458c3e6
targets/versa_ecp5: fix compilation with diamond
2019-12-06 16:16:19 +01:00
30ea463b41
targets: keep attributes are no longer needed since automatically added when applying constraints to signals.
2019-12-06 16:01:59 +01:00
8fa3f09226
partner/c10prefkit: apply ethernet constraints on nets as done on Xilinx devices.
2019-12-06 15:22:40 +01:00
0a56d86b1a
partner/c10lprefkit: remove FAMILY platform_command (not needed)
2019-12-06 15:21:48 +01:00
5193f7155a
partner/aller,nereid & tagus: fix compilation
2019-12-03 09:37:18 +01:00
f7fbfb4639
partner/community/targets: uniformize, improve presentation
2019-12-03 09:33:08 +01:00
1b1370d086
official/targets: uniformize, improve presentation
2019-12-03 09:07:09 +01:00
4e13b7fdab
targets: fomu: move SoCCore import definition
...
The SoCCore definition used to be available under litex.soc.integration,
however it was removed in
626533ce9d
2019-11-25 12:46:21 +08:00
0da263fa75
platforms: fomu: add spiflash4x definition
...
Fomu Hacker supports dual spi, so add a "spiflash4x" definition.
The litex spi_flash module will run this flash in dual mode, because the
`dq` array is only two signals wide.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 21:56:57 +08:00
45b847b466
fomu: add documentation to crg
...
This documentation can be fetched using a package such as lxsocdoc.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-23 12:55:26 +08:00
2c82e02df9
fomu: pvt: swap miso and mosi
...
These pins were swapped in the definition, which made them not work so
well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-22 18:57:26 +08:00
4231d59901
platforms/target: only catch ModuleNotFoundError exceptions to improve error reporting (thanks mwelling)
2019-11-16 09:40:30 +01:00
2a0fbcadd2
ac701: add pcie_x1 pins
2019-11-06 09:29:55 +01:00
5bd8c4d74f
targets/trellisboard: use ECLKBRIDGECS to allow ECLK to reach all DDR banks (fixes Diamond build)
2019-11-01 10:52:56 +01:00
1ae26dd499
targets: use type="io" instead of io_region=True
2019-10-30 16:35:32 +01:00
8878c0a84a
versa_ecp5, trellisboard: add trellis toolchain specific arguments
...
Sync up with Litex commit #49372852d.
2019-10-29 12:32:41 -04:00
5f80633154
targets: increase integrated ROM size if EthernetSoC used
...
Sync up with litex commit #201218b2c.
2019-10-29 12:32:41 -04:00
c83e10d9f3
official/platforms/versa_ecp5: add serdes refclk/sma
...
Sync up with litex commit #ae9c25b74.
2019-10-29 12:32:41 -04:00
91083f99a8
ulx3s: simplify SDRAM module selection
2019-10-13 21:15:22 +02:00
6f3b194bd3
Merge pull request #20 from lolsborn/ulx3s-target
...
memory device selection for ulx3s
2019-10-13 20:59:16 +02:00
abf6f7b09a
memory device selection for ulx3s
2019-10-13 09:27:33 -07:00
53d5ed1226
Merge pull request #19 from lolsborn/ulx3s-target
...
add sys clock freq flag, uses same method as current versa code
2019-10-13 10:32:43 +02:00
34507eb431
add sys clock freq flag, uses same method as current versa code
2019-10-13 00:44:07 -07:00
92cfd629df
partners: fomu-evt: add "dbg" connector
...
This connector is for the six "debug" pins on the Raspberry Pi header.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:39:19 +08:00
09a55d20c1
partners: fomu-evt: fix spiflash4x pin mapping
...
The D3 and D4 pins were swapped around, leading to interesting issues.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:38:50 +08:00
785909ac5f
targets: switch from shadow_base to io_regions
2019-10-09 11:09:59 +02:00
19e2a12266
Merge pull request #18 from xobs/fomu-cpu-updates
...
Fomu cpu updates
2019-09-27 16:55:27 +08:00
c20c489d66
fomu-evt: add i2c pins
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-27 11:26:23 +08:00
48cd1208df
targets: sync with litex targets
2019-09-25 14:09:25 +02:00
0ead12bae8
targets/ulx3s: revert to cl=2
2019-09-25 13:58:45 +02:00
c8e8f254ca
targets: fomu: add USBSoC and default to heap placer
...
The heap placer is important enough that we should just make it the
default.
Also, add a `USBSoC` that includes the required interrupt table, as this
must be specified prior to calling `__init__()`.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:08:05 +08:00
218bd353c1
targets: fomu: use memory array for sram address
...
Use the memory array to find the address for the sram bank.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:07:26 +08:00
348677598d
targets: fomu: support building with a cpu
...
Allow the user to specify a CPU.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-17 17:06:23 +08:00
e94c6c8f27
partner/netv2: switch to MVP (K4B2G1646F instead of MT41J128M16)
2019-09-12 09:52:13 +02:00
91feb59f49
Merge branch 'master' of http://github.com/litex-hub/litex-boards
2019-09-11 23:02:44 +02:00
a92ce32f91
targets/netv2: add clk100 (for framebuffer)
2019-09-11 23:02:21 +02:00
ec97d01feb
platforms/netv2: add spiflashx4, hdmi in/out
2019-09-11 23:01:58 +02:00
91a1520655
add initial Trenz Cyclone 10 LP RefKit support with SDRAM/HyperRAM/Ethernet
2019-09-10 11:32:29 +02:00
c6bb34d78a
partner/targets/nereid: MT8KTF51264 now in LiteDRAM
2019-09-09 08:50:06 +02:00
b4eefa6c33
import: allow importing directly from litex_boards.platforms or litex_boards.targets
2019-09-03 15:30:20 +02:00
ec5540454b
partner: aller/nereid/tagus fix copyright (Rohit Singh as main author), do some cosmetic
2019-09-02 11:43:30 +02:00
cd527f0fcb
Merge branch 'master' into master
2019-09-02 11:29:22 +02:00
d78965ffb2
partner/targets/fomu fix copyright & mode
2019-09-02 11:23:43 +02:00
bdbd2ec1c0
partner: add fomu target
...
This adds the Fomu target back in. The default BaseSoC supports
various USB methods, and will be updated as more become available.
The debug bridge may optionally be added.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-02 14:18:09 +08:00
e704014b36
targets/__init__: comment targets import until we found a way to avoid litedram/liteeth dependecies for targets no using them.
2019-09-01 11:43:21 +02:00
346621b9fc
partner: add platforms and targets for aller, tagus and nereid boards
2019-09-01 03:02:04 -05:00
1131af05af
nexys_video: generate clk100
2019-08-27 14:05:07 +02:00
f661ee0ec9
targets: fix import
2019-08-26 11:00:12 +02:00
ac58d57a83
targets: import platforms from litex_boards.platforms
2019-08-26 09:09:40 +02:00
b84308cb58
list all platforms/targets in platforms.py, targets.py to ease import
2019-08-26 09:07:07 +02:00
618f41bb1e
Update ecp5_evn.py
...
The system clock was driven directly while it should be driven by the PLL.
2019-08-22 02:27:50 +02:00
1abca7dcff
Turn litex_boards.community into module
2019-08-12 00:17:26 +02:00
ad21f15782
Merge pull request #10 from DurandA/ecp5-evn
...
Add ECP5 Evaluation Board
2019-08-09 12:37:36 +02:00
c90950e319
Default to 60 Mhz system clock on ECP5 Evaluation Board
...
Exact PLL clock can be derived from U1 12 Mhz or X5 50 Mhz clock.
2019-08-09 11:58:30 +02:00
9e6dccc277
Remove ECP5 Evaluation Board programmer
2019-08-09 11:54:49 +02:00
4126ed21d5
Add X5 clock and PLL to ECP5 Evaluation Board
2019-08-09 11:54:38 +02:00
c7444fe19c
Add ECP5 Evaluation Board
2019-08-09 09:45:13 +02:00
2596b20982
partner/targets/fomu: remove for now since only has a CRG (we'll add one later with a real design)
2019-08-07 09:08:11 +02:00
0c1fa7f4a8
partner/platform/fomu: cleaup, make it similar to others platforms
2019-08-07 09:04:31 +02:00
9f3ed82097
keep up to date with LiteX
...
- use 1e9/freq for default_clk_period
- add default serial on tinyfpga_bx
- use S6PLL on minispartan6
- add SPIFlash pins on versa_ecp5
2019-08-07 08:47:08 +02:00
bbf0e770e9
partner/targets/trellisboard: cleanup/update
2019-07-12 19:39:12 +02:00
a792502756
targets: make sure all targets have copyrights & #!/usr/bin/env python3
2019-07-12 19:36:49 +02:00
e470b55d2b
fomu, trellisboard: +x
2019-07-12 19:24:08 +02:00
a88970a67f
move trellis board from community to partner
2019-07-12 19:23:21 +02:00
82d73b8359
Merge branch 'master' of http://github.com/litex-hub/litex-boards
2019-07-12 19:19:31 +02:00
debafd7c17
official/partner: update
2019-07-12 19:19:01 +02:00
a07e88d761
community: Add TrellisBoard
...
Signed-off-by: David Shah <dave@ds0.me>
2019-07-09 15:52:28 +01:00
adcc34b528
Turn litex_boards.partner into module
2019-07-01 19:36:34 +02:00
325b6399a2
add test/test_targets (only test platforms with simple target for now)
2019-06-24 12:38:58 +02:00
aeddb93729
add copyright header to all files, udpate.
2019-06-24 12:13:54 +02:00
49ffc94e85
partner: platforms: fomu_evt: rename rgb_led_n -> rgb_led
...
The evt platform has a different naming scheme from the other two
versions of Fomu.
This harmonises the naming of the rgb_led pads between all of the Fomu
variants.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-06-19 19:21:15 -07:00
d01711fdf9
partner: targets: add fomu target
...
The `fomu` target represents a generic target that supports the Fomu
48 MHz crystal, with or without a PLL.
It does not yet include a BaseSoC, since that requires USB and
up5kspram, neither of which are present yet.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-06-19 12:58:13 -07:00
482a00aa76
fomu: move to right location
2019-06-12 19:50:46 +02:00
44d01edab9
dispatch platforms/targets by level of support
2019-06-10 18:59:49 +02:00
4213c75e48
init repo with litex official boards
2019-06-10 17:11:36 +02:00
Florent Kermarrec
Lucas Teske
Michael Mayers
Tim Callahan
Joey Bushagour
Sylvain Munaut
Antti Lukats
David Sawatzke
Jakub Cabal
helium729
Hans Baier
Fabien
Sergiu Mosanu
Karol Gugala
Jędrzej Boczar
Shinken Sanada
Vegard Storheil Eriksen
Romain Dolbeau
Alessandro Comodi
Kaz Kojima
Gabriel Somlo
gatecat
Stafford Horne
Joel Stanley
Aleksandra Swierkowska
Michael Betz
Jan Kowalewski
Guillaume REMBERT
Gary Wong
Vadzim Dambrouski
Blake Smith
Vadim Kaushan
Geert Uytterhoeven
la6m
Sahaj Sarup
Robert Winkler
Gwenhael Goavec-Merou
David Shah
Nathaniel R. Lewis
Basel Sayeh
davidcorrigan714
Kevin Mehall
YanekJ
Bryan Jacobs
Konrad Beckmann
Pepijn de Vos
DerFetzer
Piense
connorwk
Pawel Sagan
rob-ng15
Vamsi K Vytla
Greg Davill
Owen Kirby
Kamil Rakoczy
Raptor Engineering Development Team
Skip Hansen
Vamsi K Vytla
Tommy Thorn
Ilya Epifanov
Dave Marples
Staf Verhaegen
Piotr Binkowski
Piotr Esden-Tempski
Sean Cross
Tom Keddie
Fei Gao
Leonardo Romor
Paul Sajna
Feliks
Mark
Marcin Sloniewski
Arnaud Durand
Drew Fustini
Tim Ansell
Giammarco Zacheo
Derek Kozel
Steven Osborn
Rohit Singh